How it Works
Epson
Loading...
ET-3600
Installation Guide
4 pgs2.15 Mb0
Quick Guide and Warranty
24 pgs1.53 Mb0
Service Manual
79 pgs26.35 Mb0
Start Here
4 pgs1.75 Mb0
User Manual [nl]
4 pgs748.25 Kb0
User's Guide
202 pgs2.04 Mb0
Table of contents
Loading...

Epson ET-3600 User's Guide

Download
Page 1
ET-3600 User's Guide
Page 2
Page 3

Contents

ET-3600 User's Guide................................................................................................................................ 11
Your Ink Tank System ............................................................................................................................... 12
Product Basics .......................................................................................................................................... 13
Using the Control Panel ..................................................................................................................... 13
Control Panel Buttons and Lights .................................................................................................. 14
Entering Characters on the LCD Screen ....................................................................................... 15
Changing LCD Screen Language.................................................................................................. 16
Adjusting the Screen Contrast....................................................................................................... 16
Product Parts Locations ..................................................................................................................... 17
Product Parts - Top........................................................................................................................ 17
Product Parts - Inside .................................................................................................................... 20
Product Parts - Back...................................................................................................................... 21
Using Eco Mode and Other Power Saving Settings ........................................................................... 21
Changing the Eco Settings ............................................................................................................ 21
Changing the Sleep Timer Settings ............................................................................................... 22
Changing the Power Off Timer Settings ........................................................................................ 23
Epson Connect Solutions for Smartphones, Tablets, and More ......................................................... 24
Using Epson Email Print ............................................................................................................... 24
Using the Epson iPrint Mobile App ................................................................................................ 25
Using Epson Remote Print ........................................................................................................... 25
Using Epson Scan to Cloud........................................................................................................... 26
Using AirPrint .................................................................................................................................... 27
Using Google Cloud Print................................................................................................................... 27
Setting Up Google Cloud Print on a Chromebook ......................................................................... 28
Using the Mopria Print Service .......................................................................................................... 29
Android Printing Using the Epson Print Enabler ................................................................................ 30
Using Fire OS Printing ....................................................................................................................... 30
Using Windows 10 Mobile Printing .................................................................................................... 31
Using Epson Print and Scan App with Windows Tablets ................................................................... 31
3
Page 4
Wi-Fi or Wired Networking........................................................................................................................ 33
Wi-Fi Infrastructure Mode Setup......................................................................................................... 33
Selecting Wireless Network Settings from the Control Panel ........................................................ 34
Wi-Fi Direct Mode Setup .................................................................................................................... 36
Enabling Wi-Fi Direct Mode ........................................................................................................... 36
Wi-Fi Protected Setup (WPS)............................................................................................................. 41
Using WPS to Connect to a Network ............................................................................................. 41
Printing a Network Status Sheet......................................................................................................... 42
Changing or Updating Network Connections ..................................................................................... 43
Accessing the Web Config Utility................................................................................................... 43
Changing a USB Connection to a Wi-Fi Connection...................................................................... 43
Changing a Wi-Fi Connection to a Wired Network Connection...................................................... 44
Connecting to a New Wi-Fi Router ................................................................................................ 44
Disabling Wi-Fi Features ............................................................................................................... 45
Loading Paper ........................................................................................................................................... 46
Loading Paper in the Cassette ........................................................................................................... 46
Paper Loading Capacity..................................................................................................................... 52
Available Epson Papers ..................................................................................................................... 53
Paper or Media Type Settings - Product Software.............................................................................. 54
Selecting the Paper Settings - Control Panel ..................................................................................... 54
Paper Type Settings - Control Panel ............................................................................................. 55
Paper Source Settings................................................................................................................... 55
Selecting Universal Print Settings.................................................................................................. 56
Universal Print Settings Options ............................................................................................... 56
Placing Originals on the Product ............................................................................................................. 58
Placing Originals on the Scanner Glass ............................................................................................. 58
Copying ...................................................................................................................................................... 60
Copying Documents or Photos........................................................................................................... 60
Copying Options................................................................................................................................. 61
Printing from a Computer ......................................................................................................................... 63
Printing with Windows ........................................................................................................................ 63
4
Page 5
Selecting Basic Print Settings - Windows ...................................................................................... 63
Print Quality Options - Windows ............................................................................................... 65
Selecting Double-sided Printing Settings - Windows ..................................................................... 66
Double-sided Printing Options - Windows................................................................................. 69
Selecting Additional Layout and Print Options - Windows ............................................................. 70
Custom Color Correction Options - Windows............................................................................ 72
Header/Footer Settings - Windows ........................................................................................... 74
Selecting a Printing Preset - Windows........................................................................................... 75
Selecting Extended Settings - Windows ........................................................................................ 76
Extended Settings - Windows ................................................................................................... 77
Printing Your Document or Photo - Windows................................................................................. 78
Selecting Default Print Settings - Windows.................................................................................... 79
Changing the Language of the Printer Software Screens ......................................................... 80
Changing Automatic Update Options ............................................................................................ 81
Printing with OS X .............................................................................................................................. 82
Selecting Basic Print Settings - OS X ............................................................................................ 83
Print Quality Options - OS X...................................................................................................... 87
Print Options - OS X ................................................................................................................. 87
Selecting Page Setup Settings - OS X........................................................................................... 87
Selecting Print Layout Options - OS X........................................................................................... 88
Selecting Double-sided Printing Settings - OS X ........................................................................... 89
Double-sided Printing Options and Adjustments - OS X ........................................................... 90
Sizing Printed Images - OS X ........................................................................................................ 91
Managing Color - OS X.................................................................................................................. 92
Selecting Printing Preferences - OS X........................................................................................... 94
Printing Preferences - OS X...................................................................................................... 94
Printing Your Document or Photo - OS X....................................................................................... 95
Checking Print Status - OS X .................................................................................................... 96
Cancelling Printing Using a Product Button........................................................................................ 96
5
Page 6
Scanning .................................................................................................................................................... 97
Starting a Scan................................................................................................................................... 97
Starting a Scan Using the Product Control Panel .......................................................................... 97
Changing Default Scan Button Settings.................................................................................... 98
Starting a Scan Using the Epson Scan 2 Icon ............................................................................... 99
Starting a Scan from a Scanning Program................................................................................... 101
Scanning in Epson Scan 2 ............................................................................................................... 103
Additional Scanning Settings - Main Settings Tab ....................................................................... 106
Additional Scanning Settings - Advanced Settings Tab............................................................... 106
Image Format Options................................................................................................................. 107
Refilling Ink .............................................................................................................................................. 109
Ink Safety Precautions ..................................................................................................................... 109
Check Ink Levels .............................................................................................................................. 110
Checking Ink Levels on Your Product.......................................................................................... 111
Checking Ink Levels with Windows.............................................................................................. 111
Checking Ink Levels with OS X.................................................................................................... 113
Disabling Special Offers with Windows ....................................................................................... 114
Purchase Epson Ink ......................................................................................................................... 115
Ink Bottle Part Numbers............................................................................................................... 115
Refilling the Ink Tanks ...................................................................................................................... 115
Adjusting Print Quality............................................................................................................................ 121
Print Head Maintenance................................................................................................................... 121
Print Head Nozzle Check............................................................................................................. 121
Checking the Nozzles Using the Product Control Panel ......................................................... 121
Checking the Nozzles Using a Computer Utility...................................................................... 123
Print Head Cleaning .................................................................................................................... 126
Cleaning the Print Head Using the Product Control Panel ...................................................... 126
Cleaning the Print Head Using a Computer Utility................................................................... 127
Power Ink Flushing ...................................................................................................................... 130
Flushing the Ink Using a Computer Utility ............................................................................... 130
Print Head Alignment ....................................................................................................................... 131
Aligning the Print Head Using the Product Control Panel ............................................................ 132
Aligning the Print Head Using a Computer Utility......................................................................... 133
6
Page 7
Cleaning the Paper Path .................................................................................................................. 135
Checking the Number of Sheets....................................................................................................... 136
Checking the Sheet Counter - Windows ...................................................................................... 136
Checking the Sheet Counter - OS X ............................................................................................ 137
Cleaning and Transporting Your Product ............................................................................................. 139
Cleaning Your Product ..................................................................................................................... 139
Transporting Your Product ............................................................................................................... 140
Solving Problems .................................................................................................................................... 144
Checking for Software Updates........................................................................................................ 144
Product Status Messages ................................................................................................................ 145
Running a Product Check ................................................................................................................ 146
Resetting Control Panel Defaults ..................................................................................................... 147
Solving Setup Problems ................................................................................................................... 148
Noise After Filling the Ink............................................................................................................. 148
Software Installation Problems .................................................................................................... 148
USB Connection Problems.......................................................................................................... 149
Solving Network Problems ............................................................................................................... 149
Product Cannot Connect to a Wireless Router or Access Point .................................................. 149
Cannot Print Over a Network....................................................................................................... 151
Network Software Cannot Find Product on a Network................................................................. 152
Product Does Not Appear in OS X Printer Window...................................................................... 153
Cannot Scan Over a Network ...................................................................................................... 153
Solving Copying Problems ............................................................................................................... 155
Product Makes Noise, But Nothing Copies.................................................................................. 155
Product Makes Noise When It Sits for a While............................................................................. 155
Solving Paper Problems................................................................................................................... 155
Paper Feeding Problems............................................................................................................. 156
Paper Jam Problems Inside the Product ..................................................................................... 156
Paper Jam Problems in the Paper Cassette................................................................................ 158
Paper Jam Problems in the Duplexer (Rear Cover)..................................................................... 160
Paper Ejection Problems ............................................................................................................. 162
Solving Problems Printing from a Computer..................................................................................... 163
Nothing Prints.............................................................................................................................. 163
7
Page 8
Product Icon Does Not Appear in Windows Taskbar ................................................................... 164
Printing is Slow ............................................................................................................................ 165
Solving Page Layout and Content Problems.................................................................................... 166
Inverted Image............................................................................................................................. 166
Too Many Copies Print ................................................................................................................ 167
Blank Pages Print ........................................................................................................................ 167
Incorrect Margins on Printout....................................................................................................... 167
Incorrect Characters Print............................................................................................................ 168
Incorrect Image Size or Position.................................................................................................. 168
Slanted Printout........................................................................................................................... 169
Solving Print Quality Problems......................................................................................................... 169
White or Dark Lines in Printout .................................................................................................... 170
Blurry or Smeared Printout .......................................................................................................... 171
Faint Printout or Printout Has Gaps ............................................................................................. 172
Grainy Printout............................................................................................................................. 173
Incorrect Colors ........................................................................................................................... 174
Solving Scanning Problems ............................................................................................................. 175
Scanning Software Does Not Operate Correctly ......................................................................... 175
Cannot Start Epson Scan 2 ......................................................................................................... 176
Solving Scanned Image Quality Problems ....................................................................................... 176
Image Consists of a Few Dots Only............................................................................................. 177
Line of Dots Appears in All Scanned Images............................................................................... 177
Straight Lines in an Image Appear Crooked ................................................................................ 178
Image is Distorted or Blurry ......................................................................................................... 178
Image Colors are Patchy at the Edges ........................................................................................ 178
Image is Too Dark ....................................................................................................................... 179
Back of Original Image Appears in Scanned Image .................................................................... 179
Ripple Patterns Appear in an Image ............................................................................................ 179
Scanned Image Colors Do Not Match Original Colors................................................................. 179
Scanned Image Edges are Cropped ........................................................................................... 180
Message Appears Prompting You to Reset Ink Levels..................................................................... 180
Uninstall Your Product Software....................................................................................................... 181
Uninstalling Product Software - Windows.................................................................................... 181
8
Page 9
Uninstalling Product Software - OS X .......................................................................................... 182
Where to Get Help............................................................................................................................ 183
Technical Specifications ........................................................................................................................ 185
Windows System Requirements ...................................................................................................... 185
OS X System Requirements............................................................................................................. 186
Scanning Specifications ................................................................................................................... 186
Paper Specifications ........................................................................................................................ 187
Printable Area Specifications ........................................................................................................... 188
Ink Specifications ............................................................................................................................. 189
Dimension Specifications ................................................................................................................. 190
Electrical Specifications ................................................................................................................... 190
Environmental Specifications ........................................................................................................... 191
Interface Specifications .................................................................................................................... 191
Network Interface Specifications ...................................................................................................... 191
Safety and Approvals Specifications ................................................................................................ 192
Notices ..................................................................................................................................................... 194
Important Safety Instructions............................................................................................................ 194
General Product Safety Instructions ............................................................................................ 194
Wireless Connection Safety Instructions ..................................................................................... 196
LCD Screen Safety Instructions................................................................................................... 196
FCC Compliance Statement............................................................................................................. 196
Binding Arbitration and Class Waiver ............................................................................................... 197
Trademarks...................................................................................................................................... 200
Copyright Notice............................................................................................................................... 201
libTIFF Software Acknowledgment.............................................................................................. 201
A Note Concerning Responsible Use of Copyrighted Materials................................................... 202
Default Delay Times for Power Management for Epson Products ............................................... 202
Copyright Attribution.................................................................................................................... 202
9
Page 10
Page 11
ET-3600 User's Guide
Welcome to the ET-3600 User's Guide.
For a printable PDF copy of this guide, click here.
11
Page 12

Your Ink Tank System

You should visually check the ink levels in the product's ink tanks regularly. For optimum printing results, refill the ink tanks to the upper line at least once a year.
Note: The product has a low ink alert system. The accuracy of this system depends on the user refilling the ink tanks correctly. The product cannot directly measure the ink levels in the tanks; instead it estimates the amount of ink remaining by internally monitoring ink usage. The low ink alert system may generate inaccurate messages if the ink tanks are not refilled according to these instructions.
Visually check the ink levels in the product’s ink tanks to confirm the actual ink levels. Continued use of the product when the ink is expended could damage the product.
To refill the ink tanks and reset the ink levels, click the link below.
Related topics
Refilling Ink
12
Page 13

Product Basics

See these sections to learn about the basic features of your product.
Using the Control Panel Product Parts Locations Using Eco Mode and Other Power Saving Settings Epson Connect Solutions for Smartphones, Tablets, and More Using AirPrint Using Google Cloud Print Using the Mopria Print Service Android Printing Using the Epson Print Enabler Using Fire OS Printing Using Windows 10 Mobile Printing Using Epson Print and Scan App with Windows Tablets

Using the Control Panel

See these sections to learn about the control panel and select control panel settings.
Control Panel Buttons and Lights Entering Characters on the LCD Screen Changing LCD Screen Language Adjusting the Screen Contrast
Parent topic: Product Basics
13
Page 14

Control Panel Buttons and Lights

1
The power button and light
2
The home button
3
The Stop/Reset button
4 The LCD screen
Status Icons
5 The arrow buttons and the OK button
6
The back button
7 The numeric keypad
8 The Start B&W button
9 The Start Color button
Status Icons
Parent topic: Using the Control Panel
Status icons may be displayed on the LCD screen depending on the product's status.
14
Page 15
Icons Description
No Ethernet connection
Ethernet connection has been established
Wi-Fi network error has occurred or the product is searching for a connection
Wi-Fi connection has been established; the number of bars indicates the connection's signal strength
Not connected to a Wi-Fi network
Wi-Fi Direct mode is enabled
Wi-Fi Direct mode is disabled
Eco Mode setting is enabled
Parent topic: Control Panel Buttons and Lights

Entering Characters on the LCD Screen

Follow these guidelines to enter characters for passwords and other settings.
• To enter uppercase or lowercase letters, numbers, or symbols, press the corresponding button on the numeric keypad to scroll through characters.
• To move to the next character, press the right arrow button.
• To delete a character, press the left arrow button.
Parent topic: Using the Control Panel
15
Page 16

Changing LCD Screen Language

You can change the language used on the LCD screen.
1. Press the up or down arrow button, select Setup, and press the OK button.
You see a screen like this:
2. Press the down arrow button, select Common Settings, and press the OK button.
3. Press the down arrow button, select Language, and press the OK button.
4. Select a language and press the OK button.
5. Press the home button to exit.
Parent topic: Using the Control Panel

Adjusting the Screen Contrast

You can adjust the contrast of the LCD screen.
1. Press the up or down arrow button, select Setup, and press the OK button.
You see a screen like this:
16
Page 17
2. Press the down arrow button, select Common Settings, and press the OK button.
3. Select LCD Contrast and press the OK button.
4. Press the up or down arrow button to adjust the screen contrast.
5. Press the OK button.
6. Press the home button to exit.
Parent topic: Using the Control Panel

Product Parts Locations

See these sections to identify the parts on your product.
Product Parts - Top Product Parts - Inside Product Parts - Back
Parent topic: Product Basics

Product Parts - Top

1 Scanner unit
2 Paper cassette
17
Page 18
1 Print head
2 Output tray
3 Edge guides
4 Paper cassette
18
Page 19
1 Document cover
2 Scanner glass
3 Control panel
Parent topic: Product Parts Locations
19
Page 20

Product Parts - Inside

1 Ink tanks
2 Ink tank unit
Parent topic: Product Parts Locations
20
Page 21

Product Parts - Back

1 Rear cover (duplexer)
2 LAN port
3 USB port
4 AC inlet
Parent topic: Product Parts Locations

Using Eco Mode and Other Power Saving Settings

Your product enters sleep mode automatically and turns off the LCD screen if it is not used for a period of time. You can make the time period shorter and select other options to save energy and resources.
Changing the Eco Settings Changing the Sleep Timer Settings Changing the Power Off Timer Settings
Parent topic: Product Basics

Changing the Eco Settings

You can use the product control panel to change the Eco settings.
Note: The Sleep Timer setting in Eco Mode overrides the Sleep Timer setting in Common Settings.
21
Page 22
1. Press the up or down arrow button, select Eco Mode, and press the OK button.
You see a screen like this:
2. Select On and press the OK button.
3. Press the up arrow button to select Yes.
4. Use the numeric keypad to enter the number of minutes (1 to 12) to set as the Sleep Timer setting.
5. Change the settings as necessary.
6. Press the OK button to exit.
You see the icon in the corner of the LCD screen to indicate that Eco settings are enabled.
Parent topic: Using Eco Mode and Other Power Saving Settings

Changing the Sleep Timer Settings

You can adjust the time period before your product enters sleep mode and turns off the LCD screen.
Note: The Sleep Timer setting in Eco Mode overrides the Sleep Timer setting in Common Settings.
1. Press the up or down arrow button, select Setup, and press the OK button.
2. Press the down arrow button, select Common Settings, and press the OK button.
3. Press the down arrow button, select Sleep Timer, and press the OK button.
22
Page 23
You see a screen like this:
4. Use the numeric keypad to enter the number of minutes.
5. Press the left or right arrow button to move the cursor as necessary.
6. Press the OK button.
Parent topic: Using Eco Mode and Other Power Saving Settings

Changing the Power Off Timer Settings

You can have the product turn off automatically if it is not used for a specified period of time.
1. Press the down arrow button, select Setup, and press the OK button.
You see a screen like this:
2. Press the down arrow button, select Common Settings, and press the OK button.
3. Press the down arrow button, select Power Off Timer, and press the OK button.
4. Press the down arrow button to select a time period between 30minutes and 12h (12 hours) or Off,
and press the OK button.
23
Page 24
5. Press the home button to exit.
Parent topic: Using Eco Mode and Other Power Saving Settings

Epson Connect Solutions for Smartphones, Tablets, and More

Use your smartphone, tablet, or computer to print and scan documents, photos, emails, and web pages from your home, office, or even across the globe.
Print from anywhere with these Epson Connect solutions:
• Epson Email Print
• Epson iPrint Mobile App
• Epson Remote Print
Scan and send a file as an email or upload it to an online service directly from your Epson product with Epson Scan to Cloud or the Epson iPrint Mobile App.
Using Epson Email Print Using the Epson iPrint Mobile App Using Epson Remote Print Using Epson Scan to Cloud
Parent topic: Product Basics
Related tasks
Using AirPrint Using Google Cloud Print Using the Mopria Print Service Android Printing Using the Epson Print Enabler Using Fire OS Printing Using Windows 10 Mobile Printing

Using Epson Email Print

With Epson Email Print, you can print from any device that can send email, such as your smartphone, tablet, or laptop. Just activate your product's unique email address. When you want to print, attach a PDF, Microsoft Office document, or photo to an email and send it to your product. Both the email and the attachments will print automatically.
1. Connect your product to your network. See the link below.
24
Page 25
2. If you did not already set up Email Print when you installed your product software, visit
epsonconnect.com to learn more about Email Print, create your Epson Connect account, and
register your product to the Epson Connect service.
3. Now you are ready to send and print emails to your product's Email Print address.
Note: Go to epsonconnect.com and log into your Epson connect account to personalize your product's email, adjust print settings, and set up other Epson Connect services.
Parent topic: Epson Connect Solutions for Smartphones, Tablets, and More
Related topics
Wi-Fi or Wired Networking

Using the Epson iPrint Mobile App

Use this free Apple and Android app to print and scan with networked Epson products. Epson iPrint lets you print PDFs, Microsoft Office documents, photos, and web pages over a wireless network. You can scan and save a file on your device, send it as an email, or upload it to an online service such as Box, Dropbox, Evernote, or Google Drive.
1. Connect your product to your wireless network. See the link below.
2. Visit epson.com/connect to learn more about Epson iPrint and check the compatibility of your mobile
device.
3. Download Epson iPrint from the Apple App Store or Google Play.
4. Connect your mobile device to the same wireless network as your product.
5. Open Epson iPrint and select your Epson product.
Now you are ready to print or scan with your mobile device and your Epson product.
Parent topic: Epson Connect Solutions for Smartphones, Tablets, and More
Related topics
Wi-Fi or Wired Networking

Using Epson Remote Print

With Epson Remote Print software, you can print from your laptop or desktop computer to an Epson Email-enabled product anywhere in the world.
1. Connect your Epson product to your wireless network. See the link below.
25
Page 26
2. If you did not already set up an Epson Connect account when you installed your product software,
visit epsonconnect.com to create your account and register your product to the Epson Connect service.
Note: Make a note of your product's email address.
3. Visit epsonconnect.com to learn more about Remote Print and how to download the Remote Print
Driver software.
4. Download and install the Remote Print software.
5. Enter the email address and optional access key of your Epson product during Remote Print setup.
6. Now you are ready to print remotely. Select the print command in your laptop or desktop computer
application and choose the Remote Print option for your Epson product.
Parent topic: Epson Connect Solutions for Smartphones, Tablets, and More
Related topics
Wi-Fi or Wired Networking

Using Epson Scan to Cloud

The Epson Scan to Cloud service allows you to scan and send a file as an email or upload it to an online service directly from your Epson product. Register an email address or online services such as Box, DropBox, Evernote, or Google Drive with your Epson Connect account.
1. Connect your Epson product to your network. See the link below.
2. If you did not already set up an Epson Connect account when you installed your product software,
visit epsonconnect.com to create your account and register your product to the Epson Connect service.
Note: Make a note of your product's email address and password.
3. Visit epsonconnect.com to sign into your account with the email address and password you
selected.
4. Select your product, select Scan to Cloud, and select Destination List.
5. Click Add, then follow the instructions on the screen to create your destination list.
6. Now you are ready to use Scan to Cloud. Select the setting for scanning to Scan to Cloud on your
Epson product control panel.
Parent topic: Epson Connect Solutions for Smartphones, Tablets, and More
26
Page 27
Related topics
Wi-Fi or Wired Networking

Using AirPrint

AirPrint enables instant wireless printing from iPhone, iPad, and iPod touch with the latest version of iOS, and Mac with the latest version of OS X.
1. Load paper in your product.
2. Set up your product for wireless printing. See the link below.
3. Connect your Apple device to the same wireless network that your product is using.
4. Print from your device to your product.
Note: For details, see the AirPrint page on the Apple website.
Parent topic: Product Basics
Related topics
Wi-Fi or Wired Networking

Using Google Cloud Print

With a Google Account, you can print from your Apple or Android device to your Epson product. You can also print from Chromebooks and the Google Chrome browser without drivers or cables.
1. Connect your Epson product to your wireless network. See the link below.
2. Note your product's IP address by checking your network status. See the link below.
3. Connect your computer or your Apple or Android device to the same wireless network as your Epson
product.
4. Enter your product's IP address into the address bar of a web browser.
27
Page 28
5. Select the Google Cloud Print Services option.
Note: If you don't see the Google Cloud Print Services option, turn your product off and back on. If
the option still doesn't appear, select the Firmware Update option and follow the on-screen instructions to update your product.
6. Click Register.
7. Select the checkbox to agree to the Usage Advisory and click Next.
8. Click OK to launch the sign-in page.
A separate browser window opens.
9. Enter your Google Account username and password and click Sign in, or, if you don't have an
account, click Sign up for a new Google Account and follow the on-screen instructions.
10. Click Finish printer registration to complete setup and print a test page.
Your product is now linked to your Google Account and can be accessed from any Chromebook, computer, Apple or Android device with Internet access. Visit Epson Support for more information on using Google Cloud Print, or the Google Cloud Print website for a list of supported apps.

Setting Up Google Cloud Print on a Chromebook

Parent topic: Product Basics
Related topics
Wi-Fi or Wired Networking
Setting Up Google Cloud Print on a Chromebook
With a Google Account, you can print from a Chromebook without drivers or cables.
1. Connect your Epson product to your wireless network. See the link below.
2. Turn on your Chromebook and connect it to the same wireless network as your product.
Note: See your Chromebook's documentation for details on connecting to a network.
3. Do one of the following:
• Click Add to Cloud Print in the notification that appears in the corner of your Chromebook screen.
28
Page 29
Note: If you do not see a notification, check to see if a number appears in the status area at the lower-right corner of the screen. Click this number to open the notifications menu, then click Add to Cloud Print.
• Open a web browser and enter chrome://devices in the address bar. Skip to step 4.
• If you see a registration confirmation screen instead, click Register.
4. Click Add Device.
5. Click the Register button that appears next to your product.
6. Click Register on the confirmation screen. Your product's LCD screen displays a confirmation message.
7. Select OK or press the OK button on your product to confirm the Google Cloud Print connection and print a test page.
Your product is now linked to your Google Account and can be accessed from any Chromebook, iPhone, or Android phone with Internet access. Visit Epson Support for more information on using Google Cloud Print, or the Google Cloud Print website for a list of supported apps
Parent topic: Using Google Cloud Print
Related topics
Wi-Fi or Wired Networking

Using the Mopria Print Service

You can use the Mopria Print Service to print from your Android phone or tablet (Android v4.4 or later) to your Epson product or any Mopria-certified product from other manufacturers. You can download the Mopria Print Service from Google Play.
Note: For details on the Mopria Print Service, click here.
1. Connect your Epson product to your wireless network. See the link below.
2. On your Android device, download the Mopria Print Service from Google Play.
3. Go to Settings on your Android device, select Printing, and enable the Mopria Print Service.
4. Connect your Android device to the same wireless network as your product.
5. Now you are ready to print. From an Android application such as Chrome or Gmail, tap the menu icon and select Print. Then select All printers, select your Epson product, adjust your print settings, and print.
29
Page 30
Parent topic: Product Basics
Related topics
Wi-Fi or Wired Networking

Android Printing Using the Epson Print Enabler

You can wirelessly print your documents, emails, photos, and web pages right from your Android phone or tablet (Android v4.4 or later). With a few taps, your Android device will discover your nearby Epson product and print.
1. Connect your Epson product to your wireless network. See the link below.
2. On your Android device, download the Epson Print Enabler plug-in from Google Play.
3. Go to settings on your Android device, select printers, and enable the Epson plug-in.
4. Connect your Android device to the same wireless network as your product.
5. Now you are ready to print. From an Android application such as Chrome or Gmail, tap the menu icon and print whatever is on the screen.
Note: If you do not see your product, tap All Printers and select your product.
Parent topic: Product Basics
Related topics
Wi-Fi or Wired Networking

Using Fire OS Printing

You can wirelessly print from Amazon Fire tablets and phones to your nearby networked Epson product. There is no software to download, no drivers to install, and no cables to connect. With just a few taps in Email, Calendar, Contacts, and WPS Office, you can send whatever is on the screen to an Epson product.
1. Connect your Epson product to your wireless network. See the link below.
2. Connect your Amazon device to the same wireless network as your product.
3. Now you are ready to print. From your Amazon application, tap the print option and select your product to print whatever is on the screen.
Note: If you see a message telling you that a plug-in is required, tap OK and tap Download. If your Amazon Fire product uses Fire OS 5 and above, your device automatically uses the built-in Mopria Print Service app to print.
30
Page 31
Visit epson.com/connect to learn more about Fire OS Printing (one of many Epson Connect Partner Solutions) and check the compatibility of your mobile device.
Parent topic: Product Basics
Related topics
Wi-Fi or Wired Networking

Using Windows 10 Mobile Printing

You can wirelessly print from Windows 10 Mobile tablets and phones to your nearby networked Epson product. There is no software to download, no drivers to install, and no cables to connect. Look for the print option in your Windows 10 application to send whatever is on the screen to an Epson product.
1. Connect your Epson product to your wireless network. See the link below.
2. Connect your Windows 10 Mobile device to the same wireless network as your product.
3. Now you are ready to print. From your Windows 10 application, tap the print option and select your product to print whatever is on the screen.
Visit epson.com/connect to learn more about Windows 10 Mobile Printing (one of many Epson Connect Partner Solutions) and check the compatibility of your mobile device.
Parent topic: Product Basics
Related topics
Wi-Fi or Wired Networking

Using Epson Print and Scan App with Windows Tablets

You can use this free app to print photos and scan from your Windows (Windows 8 or higher) Surface RT or Pro tablet with networked Epson products. Epson Print and Scan App allows you to scan and capture images right to your tablet or to Microsoft OneDrive.
Note: The Epson Print and Scan App does not support Windows 10 Mobile printing.
1. Connect your Epson product to your wireless network. See the link below.
2. Download Epson Print and Scan App from the Microsoft Windows Store.
3. Connect your Windows tablet to the same wireless network as your product.
4. Open Epson Print and Scan App and select your Epson product.
Now you are ready to print photos or scan.
31
Page 32
Visit epson.com/connect to learn more about Epson Print and Scan App.
Parent topic: Product Basics
Related topics
Wi-Fi or Wired Networking
32
Page 33

Wi-Fi or Wired Networking

See these sections to use your product on a Wi-Fi or wired network.
Wi-Fi Infrastructure Mode Setup Wi-Fi Direct Mode Setup Wi-Fi Protected Setup (WPS) Printing a Network Status Sheet Changing or Updating Network Connections

Wi-Fi Infrastructure Mode Setup

You can set up your product to communicate with your computer using a wireless router or access point. The wireless router or access point can be connected to your computer over a wireless or wired network.
1 Epson product
2 Wireless router or access point
33
Page 34
3 Computer with a wireless interface
4 Computer
5 Internet
6 Ethernet cable (used only for wired connection to the wireless router or access point)

Selecting Wireless Network Settings from the Control Panel

Parent topic: Wi-Fi or Wired Networking
Selecting Wireless Network Settings from the Control Panel
You can select or change wireless network settings using your product control panel.
To install your product on a wireless network, follow the instructions on the Start Here sheet and install the necessary software. The installer program guides you through network setup.
Note: Breakdown or repair of this product may cause loss of network data and settings. Epson is not responsible for backing up or recovering data and settings during or after the warranty period. We recommend that you make your own backup or print out your network data and settings.
1. Press the up or down arrow button, select Wi-Fi Setup, and press the OK button.
You see this screen:
2. Select Wi-Fi Setup Wizard and press the OK button.
3. Select the name of your wireless network and press the OK button.
Note: To enter the wireless network name manually, select Other Networks and press the OK button. Use the product's numeric keypad to enter your network name.
34
Page 35
4. Enter your wireless password using the numeric keypad.
Note: The network name and password are case sensitive. Be sure to correctly enter uppercase and lowercase letters, and numeric or special characters.
• To enter uppercase or lowercase letters, numbers, or symbols, press the corresponding button on
the numeric keypad to scroll through characters.
• To move to the next character, press the right arrow button.
• To delete the previous character, press the left arrow button.
5. Press the OK button when you finish entering your password.
6. Confirm the displayed network settings and press the OK button to save them.
Note: If you need to change a setting, press the back button.
7. If you want to print a network setup report, press one of the Start buttons. (Otherwise, press the OK button.)
If the network connection is successful, the Wi-Fi icon appears in the upper-right corner of the LCD screen.
Note: If the Wi-Fi icon is not displayed on the LCD screen, you may have selected the wrong network name or entered the password incorrectly. Repeat these steps to try again.
Parent topic: Wi-Fi Infrastructure Mode Setup
Related tasks
Entering Characters on the LCD Screen
35
Page 36
Related topics
Changing or Updating Network Connections

Wi-Fi Direct Mode Setup

You can set up your product to communicate directly with your computer or another device without requiring a wireless router or access point. In Wi-Fi Direct Mode, the product itself acts as a network access point for up to 4 devices.
1 Epson product
2 Computer with a wireless interface
3 Other wireless device

Enabling Wi-Fi Direct Mode

Parent topic: Wi-Fi or Wired Networking
Enabling Wi-Fi Direct Mode
You can enable Wi-Fi Direct mode to allow direct communication between your product and a computer or other devices without a wireless router or access point.
1. Press the up or down arrow button, select Wi-Fi Setup, and press the OK button.
36
Page 37
You see this screen:
2. Press the down arrow button, select Wi-Fi Direct Setup, and press the OK button.
3. Select Connection Setup and press the OK button.
You see this screen:
4. Press the OK button.
You see this screen:
37
Page 38
5. Press the OK button.
You see this screen:
6. Press the OK button to complete setup and return to the Home screen.
You see the icon on the LCD screen and should be able to print directly to your product from your computer or device.
Note: If the icon is displayed on the LCD screen, Wi-Fi Direct mode is not enabled. Repeat these steps to try again.
Changing the Wi-Fi Direct Mode Password
Parent topic: Wi-Fi Direct Mode Setup
Changing the Wi-Fi Direct Mode Password
You can change the Wi-Fi Direct Mode password from the product's control panel.
1. Press the up or down arrow button, select Wi-Fi Setup, and press the OK button.
You see this screen:
38
Page 39
2. Press the down arrow button, select Wi-Fi Direct Setup, and press the OK button.
3. Select Connection Setup and press the OK button.
You see this screen:
4. Press the OK button.
The screen displays the SSID (Wi-Fi network name) and current password.
5. Press the down arrow button and select Modify, then press the up arrow button and select Yes.
Note: If you have already connected devices or computers to your product via Wi-Fi Direct, they will be disconnected when you change the password.
6. Press the left arrow button to delete the current password.
39
Page 40
7. Enter a new password using the numeric keypad.
Note: Your password must be at least 8 and no more than 22 characters long.
• To enter uppercase or lowercase letters, numbers, or symbols, press the corresponding button on
the numeric keypad repeatedly to scroll through characters.
• To move to the next character, press the right arrow button.
• To delete the previous character, press the left arrow button.
8. When you finish entering the password, press the OK button.
You see this screen:
9. Press the OK button to view the SSID and new password.
10. Press the OK button again to return to the Home screen.
Parent topic: Enabling Wi-Fi Direct Mode
Related tasks
Entering Characters on the LCD Screen
40
Page 41

Wi-Fi Protected Setup (WPS)

If your network uses a WPS-enabled wireless router or access point, you can quickly connect your product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device. Check your network product documentation for details.

Using WPS to Connect to a Network

Parent topic: Wi-Fi or Wired Networking
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network.
1. Press the up or down arrow button, select Wi-Fi Setup, and press the OK button.
You see this screen:
2. Press the down arrow button, select Push Button Setup (WPS), and press the OK button.
3. Follow the instructions on the LCD screen to complete WPS setup.
4. Press the OK button to return to the Home screen.
If the network connection is successful, the Wi-Fi icon appears in the upper-right corner of the LCD screen.
Parent topic: Wi-Fi Protected Setup (WPS)
41
Page 42

Printing a Network Status Sheet

You can print a network status sheet to help you determine the causes of any problems you may have using your product on a network.
1. Press the up or down arrow button, select Setup, and press the OK button.
You see this screen:
2. Press the down arrow button, select Network Settings, and press the OK button.
3. Select Network Status, and press the OK button.
4. Press the down arrow button, select Print Status Sheet, and press the OK button.
You see a screen like this:
5. Press one of the Start buttons to print the network status sheet.
Examine the settings shown on the network status sheet to diagnose any problems you have.
Parent topic: Wi-Fi or Wired Networking
42
Page 43

Changing or Updating Network Connections

See these sections to change or update how your product connects to a network.
Accessing the Web Config Utility Changing a USB Connection to a Wi-Fi Connection Changing a Wi-Fi Connection to a Wired Network Connection Connecting to a New Wi-Fi Router Disabling Wi-Fi Features
Parent topic: Wi-Fi or Wired Networking
Related tasks
Selecting Wireless Network Settings from the Control Panel

Accessing the Web Config Utility

You can select your product's network settings and confirm its operating status using a web browser. You do this by accessing your product's built-in Web Config utility from a computer or other device that is connected to the same network as your product.
1. Print a network status sheet.
2. Locate the IP address for your product that is listed on the network status sheet.
3. On a computer or other device connected to the same network as your product, open a web browser.
4. Enter your product's IP address into the address bar.
You see the available Web Config utility options.
Parent topic: Changing or Updating Network Connections
Related tasks
Printing a Network Status Sheet

Changing a USB Connection to a Wi-Fi Connection

If you have already connected your product to your computer using a USB connection, you can change to a Wi-Fi connection.
1. Disconnect the USB cable from your product.
2. Uninstall your product software.
43
Page 44
3. Download and install your product software from the Epson website using the instructions on the Start Here sheet.
Parent topic: Changing or Updating Network Connections

Changing a Wi-Fi Connection to a Wired Network Connection

If you have already connected your product to your computer wirelessly, you can change to a wired network connection if necessary.
1. Disable your product's Wi-Fi features.
2. Connect one end of an Ethernet network cable to the product's LAN port.
3. Connect the other end to any available LAN port on your router or access point.
4. Uninstall your product software.
5. Download and install your product software from the Epson website.
6. Follow the on-screen instructions to install the software.
7. When you see the Select Your Connection screen, select Wired network connection.
8. If you see a Select Setup Option screen, select Set up printer for the first time.
9. Continue following the rest of the on-screen instructions.
Parent topic: Changing or Updating Network Connections
Related tasks
Disabling Wi-Fi Features

Connecting to a New Wi-Fi Router

If you change the wireless router you have been using on your network, you need to update your product's Wi-Fi connection to the new router.
Note: If you switch to a 5 GHz wireless router, set the router to operate in dual band (2.4 GHz and 5 GHz) mode. See your router documentation for instructions.
1. Do one of the following:
• Windows: Uninstall your product software.
• OS X: Go to the next step.
2. Download and install your product software from the Epson website using the instructions on the Start Here sheet.
44
Page 45
Parent topic: Changing or Updating Network Connections
Related concepts
Uninstall Your Product Software

Disabling Wi-Fi Features

You may need to disable your product's Wi-Fi features if you change your network connection type or need to solve a problem with your network connection.
Note: Before disabling Wi-Fi features, make a note of your product's SSID (network name) and password, and any network settings selected for the Epson Connect services you may use.
1. Press the up or down arrow button, select Wi-Fi Setup, and press the OK button.
You see this screen:
2. Press the down arrow button, select Disable Wi-Fi, and press the OK button.
3. Press the up arrow button to disable Wi-Fi.
Parent topic: Changing or Updating Network Connections
45
Page 46

Loading Paper

Before you print, load paper for the type of printing you will do.
Loading Paper in the Cassette Paper Loading Capacity Available Epson Papers Paper or Media Type Settings - Product Software Selecting the Paper Settings - Control Panel

Loading Paper in the Cassette

You can print documents on a variety of paper types and sizes.
1. Close the paper stopper and output tray, if necessary.
46
Page 47
2. Pull out the paper cassette.
3. Slide the edge guides outward.
Note: If you are using legal-size paper or larger, press the button and extend the paper cassette.
47
Page 48
4. Slide the edge guide to your paper size.
5. Do one of the following:
• Insert paper in the cassette with the glossy or printable side facedown.
48
Page 49
• Insert up to 10 envelopes, printable side facedown and flap edge right, as shown.
• Load a sheet of loose-leaf or other paper with holes as shown.
Note: Do not select automatic 2-sided printing for this type of paper.
Note: Make sure the paper is loaded against the front edge guide and not sticking out from the rear
of the cassette.
49
Page 50
6. Slide the edge guides against the paper, but not too tightly.
Note: Make sure the paper fits under the tabs on the edge guides.
7. Keep the cassette flat as you insert it.
Note: The paper may slide forward slightly as you insert the cassette. This is normal.
8. If prompted by the product's LCD screen, select the size and type of the paper you loaded and press the OK button.
50
Page 51
9. Extend the output tray and open the paper stopper.
Note: If you are using legal-size or longer paper, do not open the paper stopper. Do not remove or insert the paper cassette during printing.
Always follow these paper loading guidelines:
• Load only the recommended number of sheets.
• Load paper short edge first and printable side facedown.
• Make sure the paper is under the tabs on the edge guides and not sticking out from the rear end of
the cassette.
• If you have trouble loading a stack of envelopes, press each envelope flat before loading it or load
one envelope at a time.
• If print quality declines when printing multiple envelopes, try loading one envelope at a time.
• Load letterhead or pre-printed paper top edge first.
• Check the paper package for any additional loading instructions.
Parent topic: Loading Paper
Related references
Paper Loading Capacity Paper Specifications Available Epson Papers
Related topics
Solving Paper Problems
51
Page 52

Paper Loading Capacity

Paper type Paper size Load up to this many sheets
Plain paper* Letter (8.5 × 11 inches
[216 × 279 mm])
A4 (8.3 × 11.7 inches [210 × 297 mm])
A6 (4.1 × 5.8 inches [105 × 148 mm])
Half Letter (5.5 × 8.5 inches [140 × 216 mm])
Legal (8.5 × 14 inches [216 × 356 mm])
User-defined 1 sheet
Epson Bright White Paper* Letter (8.5 × 11 inches
[216 × 279 mm])
Epson Premium Photo Paper Glossy
Letter (8.5 × 11 inches [216 × 279 mm])
A4 (8.3 × 11.7 inches [210 × 297 mm])
8 × 10 inches (203 × 254 mm)
5 × 7 inches (127 × 178 mm)
Up to the arrow mark on the edge guide
30 sheets
120 sheets
20 sheets
Epson Presentation Paper Matte
Epson Premium Presentation Paper Matte
4 × 6 inches (102 × 152 mm)
Letter (8.5 × 11 inches [216 × 279 mm])
A4 (8.3 × 11.7 inches [210 × 297 mm])
Letter (8.5 × 11 inches [216 × 279 mm])
A4 (8.3 × 11.7 inches [210 × 297 mm])
8 × 10 inches (203 × 254 mm)
52
80 sheets
20 sheets
Page 53
Paper type Paper size Load up to this many sheets
Envelopes No. 10 (4.1 × 9.5 inches
* You can print 2-sided print jobs automatically or manually. Load up to 30 Letter (8.5 × 11 inches [216 × 279 mm]) or smaller sized sheets for manual 2-sided print jobs. Load 1 sheet of Legal (8.5 × 14 inches [216 × 356 mm]) sized paper for manual 2-sided print jobs.
Parent topic: Loading Paper

Available Epson Papers

You can purchase genuine Epson ink and paper at epson.com/ink3 (U.S. sales) or epson.ca (Canadian sales). You can also purchase supplies from an Epson authorized reseller. To find the nearest one, call 800-GO-EPSON (800-463-7766).
Note: Paper/media availability varies by country.
Paper Type Size Part number Sheet count
Epson Bright White Paper Letter (8.5 × 11 inches
Epson Premium Presentation Paper Matte
[105 × 241 mm])
[216 × 279 mm])
8 × 10 inches (203 × 254 mm) S041467 50
Letter (8.5 × 11 inches [216 × 279 mm])
10 envelopes
S041586 500
S041257
S042180
50
100
Epson Presentation Paper Matte Letter (8.5 × 11 inches
[216 × 279 mm])
Epson Premium Photo Paper Glossy
Parent topic: Loading Paper
4 × 6 inches (102 × 152 mm) S041727 100
5 × 7 inches (127 × 178 mm) S041464 20
8 × 10 inches (203 × 254 mm) S041465 20
Letter (8.5 × 11 inches [216 × 279 mm])
53
S041062 100
S042183
S041667
25
50
Page 54

Paper or Media Type Settings - Product Software

For this paper Select this Paper Type or Media Type setting
Plain paper
Epson Bright White Paper
Epson Premium Photo Paper Glossy Premium Photo Paper Glossy
Epson Presentation Paper Matte
Epson Premium Presentation Paper Matte
Envelope Envelope
Parent topic: Loading Paper

Selecting the Paper Settings - Control Panel

You can change the default paper size and paper type using the control panel on the product.
1. Press the up or down arrow button, select Setup, and press the OK button.
You see this screen:
Plain Paper/Bright White Paper
Premium Presentation Paper Matte
2. Press the down arrow, select Paper Setup, and press the OK button.
3. Press the OK button again.
4. Select the paper size you loaded and press the OK button.
5. Select the paper type you loaded and press the OK button.
6. Press the back button.
7. Press the down arrow button, select Printer Settings, and press the OK button.
54
Page 55
8. Press the OK button again to select Paper Source Settings.
9. Select the paper source settings you want to use and press the OK button.
10. Press the home button to return to the home screen.
Paper Type Settings - Control Panel Paper Source Settings Selecting Universal Print Settings
Parent topic: Loading Paper

Paper Type Settings - Control Panel

For this paper Select this Paper Type setting
Plain paper
Epson Bright White Paper
Epson Premium Photo Paper Glossy Prem. Glossy
Epson Presentation Paper Matte
Epson Premium Presentation Paper Matte
Envelope Envelope
Parent topic: Selecting the Paper Settings - Control Panel

Paper Source Settings

Select the paper source settings you want to use for your printed jobs.
Paper Source Settings
A4/Letter Auto Switching
Error Notice Paper Size Notice Select On to display an error message when the paper size
Plain Paper
Prem. Matte
Available settings Description
On (Auto) If Letter or A4-size paper is selected for printing and the
Off
Paper Type Notice
selected paper size is not loaded, the product attempts to print on an alternate paper size (Letter for A4 or A4 for Letter).
and type settings for each paper source and the copy/print settings in each mode do not match.
55
Page 56
Parent topic: Selecting the Paper Settings - Control Panel

Selecting Universal Print Settings

You can change the default universal print settings using the product control panel.
1. Press the up or down arrow button, select Setup, and press the OK button.
You see this screen:
2. Press the down arrow button, select Universal Print Settings, and press the OK button.
You see this screen:
3. Adjust the settings as necessary.
4. When you are finished, press the back button to return to the Home screen.
Universal Print Settings Options
Parent topic: Selecting the Paper Settings - Control Panel
Universal Print Settings Options
Select the universal print settings you want to use.
56
Page 57
Universal Print Settings option
Available settings
Description
Top Offset — Adjusts the top or left margin.
Left Offset
Top Offset in Back — Adjusts the top or left margin of the back page when
Left Offset in Back
performing double-sided printing.
Check Paper Width On
Off
Select On to check the paper width before printing. This prevents printing beyond the edges of the paper when the paper size settings are wrong, but may reduce the printing speed.
Dry Time Standard
Select the drying time when printing double-sided.
Long
Longer
Skip Blank Page On Select On to skip blank pages automatically.
Off
Parent topic: Selecting Universal Print Settings
57
Page 58

Placing Originals on the Product

Follow the instructions here to place your original documents or photos on the product.
Caution: Do not place anything on top of your product or use its cover as a writing surface to avoid damaging it.

Placing Originals on the Scanner Glass

Related topics
Copying Scanning
Placing Originals on the Scanner Glass
You can place originals up to this size on the scanner glass: Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches [210 × 297 mm]).
1. Open the document cover.
58
Page 59
2. Place your original facedown on the scanner glass with the top facing into the corner. Slide the original to the edges of the indicated corner.
Note: You can place multiple originals on the scanner glass. Just make sure they are at least
0.8 inch (20 mm) away from each other.
Note: The edges of your original may be cropped by 0.06 inch (1.5 mm) from the edge of the scanner glass. Manually position your original away from the edges to prevent cropping.
3. Close the document cover gently to keep your original in place.
Parent topic: Placing Originals on the Product
59
Page 60

Copying

See the information here to copy documents or photos using your product.
Note: Copies may not be exactly the same size as your originals.
Copying Documents or Photos Copying Options

Copying Documents or Photos

You can copy documents or photos onto various sizes and types of paper, including Epson special papers.
1. Place your original document or photo on the scanner glass.
2. Load the paper you want to print on.
3. Press the down arrow button, select Copy, and press the OK button.
You see a screen like this:
4. To print more than one copy, enter the number of copies using the number keys or press the up or down arrow button.
5. Press the OK button to view and change additional copy settings, if necessary. Then press the
back button.
6. When you are ready to copy, press one of the Start buttons.
Note: To cancel printing, press the Stop/Reset button or select Cancel.
60
Page 61
Parent topic: Copying
Related references
Paper Loading Capacity Available Epson Papers
Related tasks
Loading Paper in the Cassette
Related topics
Placing Originals on the Product

Copying Options

Select the copying options you want to use for your copies.
Note: Not all options or settings may be available, depending on other copying settings.
Copying option Available settings Description
Layout With Border Leaves a small margin around the image or document
2-up Copies multiple page documents onto one sheet. After
selecting either one of these options, select Settings and change the Document Orientation setting if necessary.
ID Card Copies both sides of an ID card onto one side of a sheet of
paper
Document Size Letter
A4
Zoom Custom Size Automatically sizes the image by the percentage you select
Actual Size Copies at 100% size
Auto Fit Page Automatically sizes the image to fit the selected paper size
2-Sided Off Uses the duplexer to make 2-sided copies.
1>2-Sided
Document Orientation
Portrait Specifies the orientation of your originals
Landscape
Select the document size of your original
61
Page 62
Copying option Available settings Description
Quality Text Specifies the document type of your originals and selects
Text (Best)
the quality of your copies
Text & Image
Text & Image (Best)
Density Varying levels Adjusts the lightness or darkness of copies
Note: Remove the originals after scanning or copying. If you leave originals on the scanner glass for a
long time, they may stick to the glass.
Parent topic: Copying
62
Page 63

Printing from a Computer

Before printing from your computer, make sure you have set up your product and installed its software as described on the Start Here sheet.
Note: If you have an Internet connection, it is a good idea to check for updates to your product software on Epson's support website. If you see a Software Update screen, select Enable automatic checking and click OK. The update scans your system to see if you have the latest product software. Follow the on-screen instructions.
Printing with Windows Printing with OS X Cancelling Printing Using a Product Button

Printing with Windows

You can print with your product using any Windows application, as described in these sections.
Selecting Basic Print Settings - Windows Selecting Double-sided Printing Settings - Windows Selecting Additional Layout and Print Options - Windows Selecting a Printing Preset - Windows Selecting Extended Settings - Windows Printing Your Document or Photo - Windows Selecting Default Print Settings - Windows Changing Automatic Update Options
Parent topic: Printing from a Computer

Selecting Basic Print Settings - Windows

Select the basic settings for the document or photo you want to print.
1. Open a photo or document for printing.
2. Select the print command in your application.
Note: You may need to select a print icon on your screen, the Print option in the File menu, or another command. See your application's help utility for details.
63
Page 64
3. If necessary, select your product name as the printer you want to use.
Note: You may also need to select Properties or Preferences to view your print settings.
You see the Main tab of your printer settings window:
4. Select the size of the paper you loaded as the Document Size setting.
Note: You can also select the User-Defined setting to create a custom paper size.
5. Select the orientation of your document.
Note: If you are printing an envelope, select Landscape.
64
Page 65
6. Select the type of paper you loaded as the Paper Type setting.
Note: The setting may not exactly match the name of your paper. Check the paper type settings list
for details.
7. Select the Quality setting that matches the print quality you want to use.
8. Select a Color option:
• To print a color document or photo, select the Color setting.
• To print text and graphics in black or shades of gray, select the Black/Grayscale setting.
9. To print on both sides of the paper, select a 2-Sided Printing option.
10. To print multiple pages on one sheet of paper, or print one image on multiple sheets of paper, select one of the settings in the Multi-Page menu and select the printing options you want.
11. To print multiple copies and arrange their print order, select the Copies options.
12. To reduce noise during printing when you select Plain Paper/Bright White Paper, turn on Quiet Mode (printing will be slower).
13. To preview your job before printing, select Print Preview.
14. To save your print job as a project that can be modified and combined with other print jobs, select Job Arranger Lite.
Print Quality Options - Windows Multi-Page Printing Options - Windows
Parent topic: Printing with Windows
Related tasks
Selecting Double-sided Printing Settings - Windows Selecting Additional Layout and Print Options - Windows Printing Your Document or Photo - Windows
Print Quality Options - Windows
You can select any of the available Quality options to fine-tune the quality of your print. Some settings may be unavailable, depending on the paper type and border setting you have chosen.
Draft
For draft printing on plain paper.
Standard
For everyday text and image printing.
65
Page 66
Standard - Vivid
For text and graphics with good quality and print speed.
High
For photos and graphics with high print quality.
More Settings
Opens a window that lets you choose among levels of speed and quality.
Parent topic: Selecting Basic Print Settings - Windows
Multi-Page Printing Options - Windows
You can select any of the available options in the Multi-Page menu to set up your multi-page print job.
2-Up and 4-Up
Prints 2 or 4 pages on one sheet of paper. Click the Page Order button to select page layout and border options.
2×1 Poster, 2×2 Poster, 3×3 Poster, 4×4 Poster
Prints one image on multiple sheets of paper to create a larger poster. Click the Settings button to select image layout and guideline options.
Parent topic: Selecting Basic Print Settings - Windows

Selecting Double-sided Printing Settings - Windows

You can print on both sides of the paper by selecting one of the 2-Sided Printing options on the Main tab.
Note: Some options may be pre-selected or unavailable, depending on other settings you have chosen or if you are accessing the product over a network.
1. Select one of the following options for 2-Sided Printing:
• Auto (Long-edge binding) to print your double-sided print job by automatically flipping the paper
on the long edge.
66
Page 67
• Auto (Short-edge binding) to print your double-sided print job by automatically flipping the paper
on the short edge.
• Manual (Long-edge binding) to print your double-sided print job by printing one side and
prompting you to flip the paper over on the long edge to print the other side (recommended for paper types that do not support automatic duplexing).
• Manual (Short-edge binding) to print your double-sided print job by printing one side and
prompting you to flip the paper over on the short edge to print the other side (recommended for paper types that do not support automatic duplexing).
2. Click the Settings button.
67
Page 68
You see this window:
3. Select the double-sided printing options you want to use.
4. Click OK to return to the Main tab.
68
Page 69
5. Click the Print Density button.
You see this window:
6. Select the type of document you are printing as the Document Type setting. The software automatically sets the Adjustments options for that document type.
7. If necessary, select the Adjustments options you want to use.
8. Click OK to return to the Main tab.
9. Print a test copy of your double-sided document to test the selected settings.
10. Follow any instructions displayed on the screen during printing.
Double-sided Printing Options - Windows
Parent topic: Printing with Windows
Related tasks
Selecting Basic Print Settings - Windows
Double-sided Printing Options - Windows
You can select any of the available options on the 2-Sided Printing Settings window to set up your double-sided print job.
Binding Edge Options
Select a setting that orients double-sided print binding in the desired direction.
69
Page 70
Binding Margin Options
Select options that define a wider margin to allow for binding.
Start Page
Selects whether printing starts on the front or back page.
Create Folded Booklet Options
Select the Booklet checkbox and a binding option to print double-sided pages as a booklet.
Parent topic: Selecting Double-sided Printing Settings - Windows

Selecting Additional Layout and Print Options - Windows

You can select a variety of additional layout and printing options for your document or photo on the More Options tab.
70
Page 71
1. To change the size of your printed document or photo, select the Reduce/Enlarge Document checkbox and select one of these sizing options:
• Select the Fit to Page option to size your image to fit the paper you loaded. Select the size of your
document or photo as the Document Size setting, and the size of your paper as the Output Paper setting. If you want to center your image on the paper, select the Center option.
• Select the Zoom to option to reduce or enlarge your document or photo by a specific percentage.
Select the percentage in the % menu.
2. Select one of the following Color Correction options:
• Select Automatic to automatically adjust the sharpness, brightness, contrast, and color saturation
for your image.
• Select Custom and click the Advanced button to manually adjust the color correction settings or
turn off color management in your printer software.
• Select Image Options to access additional settings for improving printed images.
Note: You can also select Color Universal Print settings.
3. To add the following features, click the Watermark Features button:
• Anti-Copy Pattern: adds a watermark that only appears when your printout is copied
• Watermark: adds a visible watermark to your printout
Note: Click the Add/Delete button to create your own watermark, and click the Settings button to customize the watermark.
• Header/Footer: adds information such as the date and time to the top or bottom of your printout
Note: Click the Settings button to customize the text and location of the header or footer.
4. Select any of the Additional Settings options to customize your print.
Custom Color Correction Options - Windows Image Options and Additional Settings - Windows Header/Footer Settings - Windows
Parent topic: Printing with Windows
Related tasks
Selecting Basic Print Settings - Windows
71
Page 72
Custom Color Correction Options - Windows
You can select any of the available options in the Color Correction window to customize the image colors for your print job.
Color Controls
Lets you select a Color Mode setting, individual settings for Brightness, Contrast, Saturation, and Density, and individual color tones. Depending on the selected color mode, you can also adjust the midtone density using the Gamma setting.
Fix Photo
Improves the color, contrast, and sharpness of flawed photos.
Note: Fix Photo uses a sophisticated face recognition technology to optimize photos that include faces. For this to work, both eyes and the nose must be visible in the subject's face. If your photo includes a face with an intentional color cast, such as a statue, you may want to turn off Fix Photo to retain the special color effects.
72
Page 73
ICM
Lets you manage color using installed color printing profiles.
No Color Adjustment
Turns off color management in your printer software so you can manage color using only your application software.
Parent topic: Selecting Additional Layout and Print Options - Windows
Image Options and Additional Settings - Windows
You can select any of the Image Options and Additional Settings to customize your print. Some options may be pre-selected or unavailable, depending on other settings you have chosen.
Image Options
Emphasize Text
Adjusts the weight of printed text to increase readability.
Emphasize Thin Lines
Adjusts the weight of printed lines to increase visibility.
Edge Smoothing
Smooths jagged edges in low-resolution images such as screen captures or images from the Web.
Fix Red-Eye
Reduces or removes red-eye in photos.
Print Text in Black
Prints colored text in black.
For Color Text
Prints colored text on a background pattern or underlined.
For Color Graphs and Images
Prints colored graphics and images with overlay patterns.
For Color Text, Graphs, and Images
Prints colored text, graphics, and images with overlay patterns.
Enhancement Options
Specifies Color Universal Print enhancement settings for text, graphics, and images.
Additional Settings Options
Rotate 180º
Prints the image rotated 180º from its original orientation.
73
Page 74
High Speed
Speeds up printing but may reduce print quality.
Mirror Image
Flips the printed image left to right.
Parent topic: Selecting Additional Layout and Print Options - Windows
Header/Footer Settings - Windows
You can select any of the Header/Footer Settings options to add headers or footers when you print. The items are available to print at the top or bottom of your pages, in either the left, right, or center of the page.
Note: These settings are not saved with your document.
You can select to print the following information:
• User Name
• Computer Name
• Date
• Date/Time
• Collate Number (copy number)
Note: The user name, computer name, date, and time come from the Windows Control Panel on your computer.
Parent topic: Selecting Additional Layout and Print Options - Windows
74
Page 75

Selecting a Printing Preset - Windows

For quick access to common groups of print settings, you can select a printing preset on the Main or More Options tab.
Note: You can create your own preset by clicking the Add/Remove Presets button.
1. Click the Main or More Options tab.
You see the available Printing Presets on the left:
75
Page 76
2. Place your cursor over one of the Printing Presets to view its list of settings.
3. Click on a preset to change its settings, or use any of the available options on the screen to control your printing presets.
4. To choose a preset for printing, select it.
5. Click OK.
Parent topic: Printing with Windows

Selecting Extended Settings - Windows

You can select additional settings that apply to all the print jobs you send to your product.
1. Access the Windows Desktop and right-click the product icon in the Windows taskbar.
2. Select Printer Settings.
3. Click the Maintenance tab.
You see the maintenance options:
76
Page 77
4. Click the Extended Settings button.
You see this window:
5. Select any of the extended settings to customize your print.
6. Click OK to close the Extended Settings window.
7. Click OK to close the printer software window.
Extended Settings - Windows
Parent topic: Printing with Windows
Extended Settings - Windows
You can select from these settings on the Extended Settings window.
Enable EPSON Status Monitor 3
Enables product monitoring for ink and paper supplies and other issues.
Separator Page
Before each document, prints a separator page containing the title, user, date, and time.
Always Spool RAW Datatype
Increases print speed and may solve other printing problems.
Page Rendering Mode
Increases print speed when printing is extremely slow or the print head stops during printing.
77
Page 78
Print as Bitmap
Increases print speed when printing is extremely slow or the print head stops during printing, and other settings do not help.
Skip Blank Page
Ensures that your product does not print pages that contain no text or images.
Change Standard Resolution
Reduces the resolution of print data to correct printing problems.
Refine screening pattern
Prints graphics with a finer screening pattern.
Allow Applications to Perform ICM Color Matching
Allows applications to perform ICM color matching.
Always Use the Driver's Paper Source Setting
Prints using the paper source setting in the printer driver, rather than the setting in your application.
Output 1 page documents facedown in 2-Sided mode
Outputs single-sided pages in a 2-sided print job facedown instead of faceup.
Parent topic: Selecting Extended Settings - Windows

Printing Your Document or Photo - Windows

Once you have selected your print settings, you are ready to save your settings and print.
1. Click OK to save your settings.
78
Page 79
You see your application's Print window, such as this one:
2. Click OK or Print to start printing.
Parent topic: Printing with Windows
Related tasks
Selecting Basic Print Settings - Windows

Selecting Default Print Settings - Windows

When you change your print settings in a program, the changes apply only while you are printing in that program session. If you want to change the print settings you use in all your Windows programs, you can select new default print settings.
1. Access the Windows Desktop and right-click the product icon in the Windows taskbar.
2. Select Printer Settings.
79
Page 80
You see the printer settings window:
3. Select the print settings you want to use as defaults in all your Windows programs.
4. Click OK.
These settings are now the defaults selected for printing. You can still change them as needed for printing in any program session.
Changing the Language of the Printer Software Screens
Parent topic: Printing with Windows
Changing the Language of the Printer Software Screens
You can change the language used on the Windows printer software screens.
1. Access the Windows Desktop and right-click the product icon in the Windows taskbar.
2. Select Printer Settings.
You see the printer settings window.
80
Page 81
3. Click the Maintenance tab.
You see the maintenance options:
4. Select the language you want to use as the Language setting.
5. Click OK to close the printer software window.
The printer software screens appear in the language you selected the next time you access them.
Parent topic: Selecting Default Print Settings - Windows

Changing Automatic Update Options

Your printer software for Windows automatically checks for updates to the product software. You can change how often the software checks for updates or disable this feature.
1. Access the Windows Desktop and right-click the product icon in the Windows taskbar.
2. Select Software Update Settings.
81
Page 82
You see this window:
3. Do one of the following:
• To change how often the software checks for updates, select a setting in the Check every menu.
• To disable the automatic update feature, select the Never option.
4. Click OK to exit.
Note: If you choose to disable the automatic update feature, you can check for updates manually.
Parent topic: Printing with Windows

Printing with OS X

You can print with your product using any OS X printing program, as described in these sections.
Note: If you have an Internet connection, it is a good idea to check for updates to your product software on Epson's support website.
Selecting Basic Print Settings - OS X Selecting Page Setup Settings - OS X Selecting Print Layout Options - OS X Selecting Double-sided Printing Settings - OS X Sizing Printed Images - OS X
82
Page 83
Managing Color - OS X Selecting Printing Preferences - OS X Printing Your Document or Photo - OS X
Parent topic: Printing from a Computer

Selecting Basic Print Settings - OS X

Select the basic settings for the document or photo you want to print.
1. Open a photo or document for printing.
2. Select the print command in your application.
Note: You may need to select a print icon on your screen, the Print option in the File menu, or another command. See your application's help utility for details.
3. Select your product as the Printer setting.
4. If necessary, click the arrow next to the Printer setting or the Show Details button to expand the print window.
83
Page 84
You see the expanded printer settings window for your product:
Note: The print window may look different, depending on the version of OS X and the application you are using.
5. Select the Copies and Pages settings as necessary.
Note: If you do not see these settings in the print window, check for them in your application before printing.
84
Page 85
6. Select the page setup options: Paper Size and Orientation.
Note: If you do not see these settings in the print window, check for them in your application before
printing. They may be accessible by selecting Page Setup from the File menu.
7. Select any application-specific settings that appear on the screen, such as those shown in the image above for the Preview application.
8. Select Print Settings from the pop-up menu.
85
Page 86
You see these settings:
9. Select the type of paper you loaded as the Media Type setting.
Note: The setting may not exactly match the name of your paper. Check the paper type settings list for details.
10. Select the Print Quality setting you want to use.
11. Select any of the available print options.
Print Quality Options - OS X Print Options - OS X
Parent topic: Printing with OS X
Related references
Paper or Media Type Settings - Product Software
Related tasks
Selecting Double-sided Printing Settings - OS X Selecting Page Setup Settings - OS X Printing Your Document or Photo - OS X
86
Page 87
Print Quality Options - OS X
You can select any of the available Print Quality options to fine-tune the quality of your print. Some settings may be unavailable, depending on the paper type setting you have chosen.
Draft
For draft printing on plain paper.
Normal
For everyday text and image printing.
Normal - Vivid
For everyday text and image printing with good quality and print speed.
Fine
For text and graphics with good quality and print speed.
Quality
For text and graphics with increased quality and print speed.
Parent topic: Selecting Basic Print Settings - OS X
Print Options - OS X
You can select any of the print options to customize your print. Some options may be unavailable, depending on other settings you have chosen.
Grayscale
Prints text and graphics in black or shades of gray.
Mirror Image
Lets you flip the printed image horizontally.
Parent topic: Selecting Basic Print Settings - OS X

Selecting Page Setup Settings - OS X

Depending on your application, you may be able to select the paper size and orientation settings from the print window.
87
Page 88
Note: If you do not see these settings in the print window, check for them in your application before
printing. They may be accessible by selecting Page Setup from the File menu.
1. Select the size of the paper you loaded as the Paper Size setting.
2. Select the orientation of your document or photo as shown in the print window.
Note: If you are printing an envelope, select the icon.
Note: You can reduce or enlarge the size of the printed image by selecting Paper Handling from the
pop-up menu and selecting a scaling option.
Parent topic: Printing with OS X
Related tasks
Selecting Basic Print Settings - OS X

Selecting Print Layout Options - OS X

You can select a variety of layout options for your document or photo by selecting Layout from the pop­up menu on the print window.
• To print multiple pages on one sheet of paper, select the number of pages in the Pages per Sheet
pop-up menu. To arrange the print order of the pages, select a Layout Direction setting.
88
Page 89
• To print borders around each page on the sheet, select a line setting from the Border pop-up menu.
• To invert or flip the printed image, select the Reverse page orientation or Flip horizontally settings.
Parent topic: Printing with OS X

Selecting Double-sided Printing Settings - OS X

You can print on both sides of the paper by selecting Two-sided Printing Settings from the pop-up menu on the print window.
Note: Some options may be pre-selected or unavailable, depending on other settings you have chosen or if you are accessing the product over a network. This screen may be different, depending on the version of OS X you are using.
1. Select one of the Two-sided Printing options.
89
Page 90
2. Select the type of document you are printing as the Document Type setting. The software automatically sets the Adjustments options for that document type.
3. If necessary, customize the Adjustments settings as instructed on the screen.
4. Print a test copy of your double-sided document to test the selected settings.
5. Follow any instructions displayed on the screen during printing.
Double-sided Printing Options and Adjustments - OS X
Parent topic: Printing with OS X
Related tasks
Selecting Basic Print Settings - OS X
Double-sided Printing Options and Adjustments - OS X
You can select any of the available options in the Two-sided Printing Settings or Output Settings pop-up menu to set up your double-sided print job.
90
Page 91
Two-sided Printing Options
Long-Edge binding
Orients double-sided printed pages to be bound on the long edge of the paper.
Short-Edge binding
Orients double-sided printed pages to be bound on the short edge of the paper.
Adjustments
Print Density
Sets the level of ink coverage for double-sided printing.
Increased Ink Drying Time
Sets the amount of time required for drying ink after printing on one side of the paper before printing the other side in double-sided printing.
Parent topic: Selecting Double-sided Printing Settings - OS X

Sizing Printed Images - OS X

You can adjust print order and the size of the image as you print it by selecting Paper Handling from the pop-up menu on the Print window.
• To print only selected pages in a multi-page document, select an option from the Pages to Print pop-
up menu.
• To adjust the order in which pages are printed, select an option from the Page Order pop-up menu.
91
Page 92
• To scale the image to fit on a specific paper size, select the Scale to fit paper size checkbox and
select a paper size from the Destination Paper Size pop-up menu.
Parent topic: Printing with OS X

Managing Color - OS X

You can adjust the Color Matching and Color Options settings to fine-tune the colors in your printout, or turn off color management in your printer software.
1. Select Color Matching from the pop-up menu in the print window.
2. Select one of the available options.
3. Select Color Options from the pop-up menu in the print window.
Note: The available settings on the Color Options menu depend on the option you selected on the Color Matching menu.
4. Select one of the available options.
92
Page 93
Color Matching and Color Options - OS X
Parent topic: Printing with OS X
Color Matching and Color Options - OS X
You can select from these settings on the Color Matching and Color Options menus.
Color Matching Settings
EPSON Color Controls
Lets you manage color using controls in your printer software or turn off color management.
ColorSync
Prints using standard color profiles for your product and paper to help match image colors. You can customize the conversion method and filter settings on the ColorSync pop-up menu in the print window.
Color Options Settings
Manual Settings
Lets you select manual color adjustments. Click the arrow next to Advanced Settings and select settings for Brightness, Contrast, Saturation, and individual color tones. You can also select a color Mode setting for printing photos and graphics and the Fix Red-Eye setting to reduce or remove red­eye in photos. Depending on the selected color mode, you can also adjust the midtone density using the Gamma setting.
Fix Photo
Improves the color, contrast, and sharpness of flawed photos. Click the arrow next to Advanced Settings and select the Fix Red-Eye setting to reduce or remove red-eye in photos.
Note: Fix Photo uses a sophisticated face recognition technology to optimize photos that include
faces. For this to work, both eyes and the nose must be visible in the subject's face. If your photo includes a face with an intentional color cast, such as a statue, you may want to turn off Fix Photo to retain the special color effects.
Off (No Color Adjustment)
Turns off color management in your printer software so you can manage color using only your application software.
Note: An ICC profile is required if color management is turned off.
Parent topic: Managing Color - OS X
93
Page 94

Selecting Printing Preferences - OS X

You can select printing preferences that apply to all the print jobs you send to your product.
1. In the Apple menu or the Dock, select System Preferences.
2. Select Print & Fax, Print & Scan, or Printers & Scanners, select your product, and select Options & Supplies.
3. Select Driver or Options.
You see a screen like this:
4. Select any of the available printing preferences.
5. Click OK.
Printing Preferences - OS X
Parent topic: Printing with OS X
Printing Preferences - OS X
You can select from these settings on the Options or Driver tab.
Skip Blank Page
Ensures that your product does not print pages that contain no text or images.
94
Page 95
Quiet Mode
Lessens noise during printing when you select Plain Paper/Bright White Paper as the paper Type or Media Type setting.
High Speed Printing
Speeds up printing but may reduce print quality.
Warning Notifications
Lets you choose whether or not to receive warning notifications from the printer software for various operating conditions.
Establish bidirectional communication
Allows the product to communicate with the computer. Do not change the default setting unless you experience issues when using a shared printing pool.
Parent topic: Selecting Printing Preferences - OS X

Printing Your Document or Photo - OS X

Once you have selected your print settings, you are ready to print.
Click Print at the bottom of the print window.
Checking Print Status - OS X
Parent topic: Printing with OS X
95
Page 96
Related tasks
Selecting Basic Print Settings - OS X
Checking Print Status - OS X
During printing, you can view the progress of your print job and control printing.
1. Click the printer icon when it appears in the Dock.
You see the print status window:
2. Select the following options as necessary:
• To cancel printing, click the print job and click or Delete.
• To pause a print job, click the print job and click or Hold. To resume a print job, click the
paused print job and click or Resume.
• To pause printing for all queued print jobs, click Pause or Pause Printer.
• To display other printer information, click Settings.
Parent topic: Printing Your Document or Photo - OS X

Cancelling Printing Using a Product Button

If you need to cancel printing, press the Stop/Reset button on your product.
Parent topic: Printing from a Computer
96
Page 97

Scanning

You can scan original documents or photos and save them as digital files.
Starting a Scan Scanning in Epson Scan 2

Starting a Scan

After placing your original documents or photos on your product for scanning, start scanning using one of these methods.
Starting a Scan Using the Product Control Panel Starting a Scan Using the Epson Scan 2 Icon Starting a Scan from a Scanning Program
Parent topic: Scanning
Related topics
Placing Originals on the Product

Starting a Scan Using the Product Control Panel

You can scan an image using your product's control panel buttons.
Your product automatically selects suitable default scan settings, but you can view or change them as necessary.
1. Make sure you installed the product software and connected the product to your computer or network.
Note: Restart your computer after installing the product software to enable scanning from the control panel. Also make sure the Event Manager program is not being blocked by your firewall or security software.
2. Press the up or down arrow button, select Scan, and press the OK button.
97
Page 98
The scan options are displayed:
3. Press the up or down arrow button to select a scan option and press the OK button.
• Cloud sends your scanned files to a destination that you have registered with Epson Connect.
• Computer saves your scan as a JPEG file to your computer or as an image capture in OS X.
• Computer (WSD) lets you manage network scanning in Windows 10, Windows 8.x, Windows 7,
or Windows Vista (English only).
Note: To use this feature, you must first set up WSD (Web Services for Devices) on the Windows 7 or Windows Vista computer you want to scan to.
4. To scan to your computer, you first need to select how you connected your product to your computer:
• If your product is connected directly to your computer with a USB cable, press the up or down
arrow button to select USB Connection.
• If your product is connected to your computer over a network, press the up or down arrow button
to select the computer name from the list and press the OK button to begin scanning.
5. Press one of the Start buttons to start scanning.
Changing Default Scan Button Settings
Parent topic: Starting a Scan
Related tasks
Using Epson Scan to Cloud
Changing Default Scan Button Settings
You can view or change the default scan settings your product uses when you scan to your computer using the product buttons. You do this using the Event Manager program.
98
Page 99
1. Do one of the following to open Event Manager:
• Windows 10: Click , select All apps, select EPSON Software, and select Event Manager.
• Windows 8.x: Navigate to the Apps screen and select Event Manager.
• Windows (other versions): Click or Start > All Programs or Programs > EPSON Software
> Event Manager.
• OS X: Open the Applications folder, click Epson Software, and click Event Manager.
2. Open the Scanner (Windows) or Select Scanner (OS X) drop-down list and select your product, if necessary.
3. Click Make Job Settings.
4. Open the Edit Job Settings drop-down list and select the scan button settings you want to view or change.
5. Change the settings as necessary.
6. Click OK.
7. Click Close to close the Event Manager window.
Parent topic: Starting a Scan Using the Product Control Panel

Starting a Scan Using the Epson Scan 2 Icon

You can start the Epson Scan 2 program to select scan settings, scan, and save the scanned image to a file.
• Windows 10: Click and select All apps > EPSON > Epson Scan 2.
• Windows 8.x: Navigate to the Apps screen and select Epson Scan 2.
• Windows (other versions): Click or Start, and select All Programs or Programs. Select EPSON
> Epson Scan 2 > Epson Scan 2.
• OS X: Open the Applications folder, open the Epson Software folder, and select Epson Scan 2.
99
Page 100
You see an Epson Scan 2 window like this:
100
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use