Epson EMP-5350, EMP-7250 User Manual

Important Information

Please read the following important information about your projector.

Important Safety Information

Warning:

switched on as the bright light can damage your eyes. Never let children look into the lens when it is on.

Warning:

lamp and filter covers. Dangerous electrical voltages inside the projector can cause severe injury. Except as specifically directed in this Owner’s Manual, do not attempt to service this product yourself. Refer all servicing to qualified service personnel.

Warning:

and optional parts out of the reach of children. Children covering their heads with bags may result in death by suffocation. Be particularly careful around small children.

Caution:

bulb with your bare hands. The invisible residue left by the oil on your hands may be shorten the bulb life. Use a cloth or gloves to handle the new bulb.

Never look into the projector lens when the lamp is

Never open any covers on the projector except the

Keep the plastic bags for the projector, accessories

When you replace the lamp, never touch the new

EMP-7350/7250/5350

operation panel

speaker

foot adjust lever

Power

Help

Resize

A/Vmute

Shift

Operation Panel

Keystone

Volume

Esc

UICK

Button Function

Power Turns the projector on or off. Help Displays the Help menu.

VideoComputer

Computer Switches the computer input source.Pressing the button once

A/V mute Turns off/on the audio/videio output of the projector. To turn on

Resize Switches the resolution to the Window display or Resize

Video Switches the video input source.

Menu Displays or hides the menu. Esc Terminates the current function that you have been executing .

Enter Selects a menu option.

Sync +/- Synchronize the computer’s graphic signal.

Tracking +/- Match the projectos’s internal clock to various computer

Shift Pressing the shift and keystone button at the same time can

Keystone +/- Adjusts the keystone.

operation indicator

switches to the Computer1, and pressing twice switches to the Computer2/BNC.

the audio/video output, press the A/V mute button again, or either the Esc or the Volume button.

display.

Pressing the button once switches to the composite Video, pressing twice switches to the S-Video and pressing three times switches to the component video.

If you press the Esc button when a menu or help is displayed, you can go back to the previous menu layer.

If you press the Enter button when a menu or help is displayed, you can access to the next menu layer. If you press the Enter button when a menu or help is not displayed, you can optimize the computer image.

Use these buttons to adjust an overall image that is fuzzy or streaked, or to select menu items during menu operations.

graphic signals (tracking adjustment). Use these buttons to adjust an image with vertical fuzzy lines, or to change numeric settings during menu operations.

increase or decrease the sound volume.

TART

speaker

front foot

remoto control receiver

zoom ring focus ring

EMP-7350/7250/5350

Button Function

Freeze Keeps the current computer or video image on the screen. A/V Mute Turns off/on the audio/video output of the projector. To turn on the audio/video output, press

E-Zoom Executes the E-zoom function. When you press the right of the button, it enlarges the image.

Power Turns the projector on or off. Effect buttons Use to display special effects that have been assigned in the Effect menu or with the optional

Enter Use the enter button to navigate the menus or use the remote as a mouse pointer when the

Illumination button

Esc Terminates the current function that you have been executing .

Menu Displays or hides the menu. Help Displays the Help menu. Comp 1 Switches to the computer image from Computer 1. Comp2/BNC Switches to the image from Computer2 / BNC. S-Video Switches to the video image from S-Video. Video Switches to the image from Video. Auto Optimizes the computer image. Resize Switches the Window display and Resizing display. P in P Displays a subscreen on the main screen. To display the subscreen, press the PinP button

Preset The current settings for the computer input signal are saved and recalled for the next use.

Volume +/- Adjusts the volume.

either the A/V mute button again or Esc button.

When you press the left of the button, it reduces the image. To display a portion of the enlarged image which is outside of the display area, press the Pointer button to scroll the image.

ELP Link IV software.

projector is connected to the computer with the main cable and the mouse cable. You can also selects a menu option by pressing the center of this button(Enter). If you press the Enter when a menu or help is displayed, you can access to the next menu layer. When the image source is a computer, the Enter button acts as the mouse left click.

Lights up all buttons on the remote control.

If you press the Esc button when a menu or help is displayed, you can go back to the previous menu layer. When the image source is a computer, the Esc button acts as the mouse right click.

once. To hide the subscreen, press it again. To set the subscreen being displayed, press in the following order : [Menu] → [Setting] → [P in P]. The default settings are as follows; Subscreen size:1/9 division Main screen input source:Computer Subscreen input source:Video To change the subscreen position, press the Pointer button. The subscreen will move to the selected direction.

User can save the preset up to five settings. The following settings are saved: Resolution, Tracking, Sync Signal, Position.

UICK

Power

Freeze

A/V Mute

R/C ON

E-Zoom

OFF

Enter

Esc

Remote control

TART

DATA/VIDEO PROJECTOR

Owner’s Manual

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.

Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with SEIKO EPSON CORPORATION’s operating and maintenance instructions.

SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION.

EPSON is a registered trademark and PowerLite is a trademark of SEIKO EPSON CORPORATION.

General Notice: The following trademarks and registered trademarks are the

property of their respective owners and are used in this publication for identification purposes only.

• EPSON/Seiko Epson Corp.

• Macintosh, Macintosh OS System 7, Macintosh OS System 7.5.1 PowerBook, Quadra, Centris, Power Mac/Apple Computer Corp.

• IBM/International Business Machines, Inc.

• Windows 95, Windows 98, Windows NT4.0/Microsoft Corp.

• Adobe, Acrobat Reader/Adobe Systems Incorporated.

Other product names used herein are also for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.

■

Contents iii Introduction vii

Getting the Most Out of Your Projector................................ix

Remote control ..........................................................................ix

Optional Accessories...................................................................ix

About This Manual................................................................xi

Safety Instructions................................................................xii

Where to Get Help..............................................................xiv

World Wide Web site................................................................xiv

Transporting your projector.......................................................xv

■

1 Installation 1

Unpacking the Projector.........................................................2

Additional Components.............................................................. 3

Setting Up the Projector.........................................................4

Connecting to a Computer.....................................................7

Connecting to a PC Desktop Computer ..................................... 8

Connecting to a PC Laptop Computer..................................... 12

Connecting to a Desktop Macintosh......................................... 16

Connecting to a PowerBook..................................................... 22

Connecting to a High-End Workstation ................................... 28

Connecting to an External Speaker or PA System...................... 32

2 Using the Projector 33

Turning the Equipment On and Off.....................................35

■ ■ ■ ■ ■

iii

Turning the Projector On and Off............................................ 35

Focusing and Positioning the Screen Image ..........................37

Resize Button........................................................................... 39

Controlling the Projector......................................................40

Using the Remote Control....................................................... 41

Using the Operation Panel .......................................................44

Projector Status Indicators....................................................46

Operation Indicator.................................................................. 46

Lamp Indicator......................................................................... 47

Temperature Indicator.............................................................. 47

3 Using the Projector Menus 49

Accessing the Main Menu.....................................................50

Changing a Menu Setting.....................................................50

Menu Options......................................................................53

Video Menu (Image source = Computer) ................................. 53

Video Menu (Image source = Video)........................................ 56

Audio Menu............................................................................. 57

Effect Menu ............................................................................. 58

Setting Menu ...........................................................................59

User's Logo Menu ...................................................................60

Reset All Menu......................................................................... 62

Advanced Menu ....................................................................... 62

About Menu............................................................................. 64

■ ■ ■ ■

4 Using the ELP Link IV Software 65

Presentation support function...............................................66

Projector setting function .....................................................66

System requirements.............................................................66

Projector Software CD-ROM ...............................................68

ELP Link IV utility................................................................... 68

ELP Link IV User’s Guide........................................................ 68

Adobe Acrobat Reader.............................................................. 68

Connecting the Cables..........................................................69

Connecting to your PC ............................................................69

Connecting to your Macintosh................................................. 70

Contents

■

Installing the Projector Software on Your PC........................71

Installation of Acrobat Reader ..................................................75

Installing the Projector Software on Your Macintosh.............76

Accessing the Projector Software...........................................79

For Windows 95/98 and NT 4.0 users..................................... 79

For Macintosh users .................................................................79

Installing or Accessing the Projector Software on the CD-ROM

Directly ................................................................................80

For Windows users ................................................................... 80

For Macintosh users .................................................................81

5 Maintenance 83

Cleaning the Lens.................................................................84

Cleaning the Projector Case..................................................84

Cleaning the Air Filter..........................................................85

Replacing the Lamp..............................................................86

6 Troubleshooting 89

Problems with the Projector..................................................90

Problems with the Image or Sound.......................................92

Technical Specifications 95

Supported Monitor Displays.................................................97

Monitor and Computer In 1/2 connector pin assignments ...99

Glossary 101 Index 103

■ ■ ■ ■ ■

■ ■ ■ ■

Contents

■

Introduction

our compact, lightweight EPSON EMP-7350/7250/5350 projector lets you project full-color images and video onto a large screen for presentations. You can connect it simultaneously to two image sources: one PC or Apple® Macintosh® computer image sources, plus one video source such as a video tape deck, camcorder, or digital camera. You can also connect audio for each image source.

Images are displayed in full color (16,670,000 colors) at a XGA resolution of 1024 × 768 pixels (EMP-7350/7250) and SVGA resolution of 800 × 600 pixels (EMP-5350). Your projector produces bright images that can be easily seen in rooms light enough to take notes. Your projector’s 3W+3W speakers employ a built-in 3D Sound System for rich, powerful audio output. You can even connect an external speaker when further amplification is required. A totally new AVTSS™ (Automatic Video Tracking and Synchronization Sensing, patent pending) provides automatic set-up of image from a computer.

■

You can control your projector through a hand-held remote control unit, with menus being provided for image source switching and image adjustment. The remote control can also act as a wireless mouse to control mouse operations on your computer screen during presentations. Additionally, you can install the projector’s ELP Link IV software to control the projector’s setting from your computer and enhance your presentations with special effects.

■ ■ ■ ■ ■

vii

Your projector features the newest resizing technology DAR (Digital Active Resizing) which supports the native XGA (EMP-7350/7250) and SVGA (EMP-5350) computer output, as well as VGA, SXGA and UXGA (EMP-7350/

7250) output and VGA, XGA and SXGA (EMP-5350) output. No matter what type of computer output is used, the result is a full-size video image of outstanding clarity.

The EMP-7350/7250/5350 projector supports IBM compatible PCs and laptops, as well as Apple® Macintosh®, Power Macintosh and PowerBook computers. The video source can be NTSC, PAL or SECAM in composite video, SVideo format. See Chapter 7 for details on supported computers and video formats.

■ ■ ■ ■

viii

Introduction

■

Getting the Most Out of Your Projector

Your projector comes with a full set of features that enable you to control the settings for the image display, video and audio. To get the most out of your projector, read this section for a quick summary of the important features.

Remote control

The buttons on the remote control enable you to turn the projector on and off, and provide direct access to blank, freeze, volume, mute and image source switching. Use the remote control buttons to access custom functions (with the ELP Link IV software) and the projector’s menu system you can even use the remote control your computer in place of your computer’s mouse.

Optional Accessories

To enhance your use of the projector, EPSON provides the following optional accessories:

• Spare Lamp ELPLP09

• Computer Cable (HD15/H15, 1.8m) ELPKC02

• Computer Cable (HD15/HD15, 3.0m) ELPKC09

• Computer Cable (HD15/5BNC, 1.8m) ELPKC11

• Workstation Cable (5BNC/BW3, 3.0m) ELPKC12

• Workstation Cable (5BNC/5BNC, 3.0m) ELPKC13

• Workstation Cable (HD15/EVC, 3.0m) ELPKC14

• Workstation Cable (5BNC/EVC, 3.0m) ELPKC15

• Image Presentation Camera ELPDC01

• Mac Adapter Set ELPAP01

Getting the Most Out of Your Projector

■ ■ ■ ■ ■

• Communication Cable Set ELPKC04

• Ceiling Mount ELPMB02

• Ceiling Plate ELPFC01

• Pipe 370 ELPFP01

• Pipe 570 ELPFP02

• Pipe 770 ELPFP03

• Soft Carrying Case ELPKS10

• Hard Travel Case ELPKS09

• Hard Travel Case (small size) ELPKS12

• Long Throw Zoom Lens ELPLL01

• Wide Convergence Lens ELPCW01

• Remote Control Receiver ELPST02

• Portable Screen ELPSC06

• Flange ELPFL01 You can purchase these accessories from your dealer.

■ ■ ■ ■

Introduction

■

About This Manual

Chapter 1, “Installation”, gives step-by-step instructions on how to set up the projector and connect it to your computer, video source, or other external speaker or PA system. Read the installation procedures that apply to your configuration.

Chapter 2, “Using the Projector”, describes how to switch the projector on/off and control simple projector settings using the remote control or the operation panel.

Chapter 3, “Using the Menus”, describes how to use the menus to adjust the color and image settings, change the display of the projected image, and modify audio settings such as bass and treble.

Chapter 4, “Using the ELP Link IV Software”, describes how to use the ELP Link IV software which supports the presentation functions to control the projector and configure special effects.

Chapter 5, “Maintenance”, describes how to clean your projector and perform limited maintenance.

Chapter 6, “Troubleshooting”, describes how to interpret your projector’s indicator lights and gives helpful information for avoiding errors, optimizing image quality and solving problems.

Chapter 7, “Technical Specifications,” lists the technical specifications for your projector.

A Glossary and Index are provided at the end of the manual.

About This Manual

■ ■ ■ ■ ■

Safety Instructions

Follow these safety instructions when setting up and using the projector:

1. Do not place the projector on an unstable cart, stand, or

table.

2. Do not use the projector near water or sources of heat.

3. Use attachments only as recommended.

4. Use the type of power source indicated on the projector.

If you are not sure of the power available, consult your dealer or local electricity company.

5. Place the projector near a wall outlet where the plug can

be easily unplugged.

6. Insert the projector’s three-pin grounding-type plug into

a properly grounded outlet. If you have a two-prong outlet, contact an electrician to replace it. Do not handle the plug with wet hands.

7. Take the following precautions when handling the plug.

Failure to comply with these precautions could result in sparks or fire.

■ ■ ■ ■

xii

• Do not insert the plug into an outlet with dust present.

• Insert the plug firmly into the outlet.

8. Do not overload wall outlets, extension cords or integral

convenience receptacles. This can cause fire or electric shock.

9. Do not place the projector where the cord can be stepped

on. It may result in fraying or damage to the plug.

10.Unplug the projector from the wall outlet before cleaning.

Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.

Introduction

■

11.Do not block the slots and openings in the projector case.

They provide ventilation and prevent the projector from overheating. Do not place the projector on a sofa, rug or other soft surface, or in a closed-in cabinet unless proper ventilation is provided.

12.Never push objects of any kind through cabinet slots.

Never spill liquid of any kind into the projector.

13.Except as specifically explained in this User’s Guide, do

not attempt to service this product yourself. Refer all servicing to qualified service personnel. Opening or removing covers may expose you to dangerous voltages and other hazards.

14.Unplug the projector during thunder storms or when it

will not be used for extended periods.

15.Do not place the projector and remote control on top of

heat-producing equipment or in a heated place, such as a car.

16.Unplug the projector from the wall outlet and refer

servicing to qualified service personnel under the following conditions:

• When the power cord or plug is damaged or frayed

• If liquid has been spilled into the projector, or it has been exposed to rain or water

• If it does not operate normally when you follow the operating instructions, or if it exhibits a distinct change in performance, indicating a need for service

• If it has been dropped or the housing has been damaged

Safety Instructions

■ ■ ■ ■ ■

xiii

Where to Get Help

If you are having trouble setting up or running your projector, first see Chapter 6, “Troubleshooting”. If you cannot resolve the problem, contact the appropriate representative listed in the section entitled “After sales service contact addresses” at the end of this manual.

Before you call, please have the following information ready:

• Product name

• Product serial number

• Computer configuration

• Description of the problem

World Wide Web site

If you connect to the Internet and have a Web browser, you can access to EPSON’s World Wide Web site at http:// www. epson. com. EPSON’s home page provides you What’s New, EPSON Products, EPSON Connection, Corporate Info and EPSON Contacts. Link to the EPSON Connection for the latest drivers and FAQ’s (Frequently Asked Questions) and the EPSON Chart area. To get in touch with EPSON around the world, EPSON Contacts includes Contact Information for local EPSON subsidiaries.

■ ■ ■ ■

xiv

Introduction

■

Transporting your projector

The projector contains many glass parts and precision parts. If you need to transport it, please follow these packing guidelines to prevent damaging the projector:

• When shipping the projector for repairs, use the original packaging material.

If you don’t have the original packaging, use equivalent materials, placing plenty of cushioning around the projector.

• When transporting the projector for business use, first put the projector in a hard carrying case (such as the optional EPSON accessory case: ELPKS12), then pack it in a firm box, using cushioning around the case.

• When you are hand-carrying the projector, be sure to store it in a hard (ELPKS09) or soft carrying case (ELPKS10) such as the optional cases offered by EPSON.

♦

Note:

EPSON shall not be liable for any damages incurred

during transportation.

Where to Get Help

■ ■ ■ ■ ■

■ ■ ■ ■

xvi

Introduction

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

■

Installation

This chapter describes how to unpack and set up your

projector, and connect it to other equipment. The projector must be connected to a computer or a video source such as a video tape deck, camcorder, digital camera or laser disk player before it can project any images. You may also want to set up the projector for one or more of the following:

• Connect the mouse cable to use the remote control as a wireless mouse.

• Connect the projector to an audio source for one or both image sources. The audio source can be the computer, video source, or another device such as a stereo.

• Connect the projector to an external speaker or PA system to amplify the audio.

■ ■ ■ ■ ■

Unpacking the Projector

When you unpack the projector, make sure you have all these components:

• Projector

• Remote control

• 2 AA batteries

• Power cord

• Computer cable

• Audio cable

• Audio/Video (A/V) cable

• Mac Desktop adapter

• Mac Monitor adapter

• Main cable

• PS/2 mouse cable

• USB mouse cable

• Serial mouse cable

■ ■ ■ ■

• Mac mouse cable

• PC serial cable

• Mac serial cable

• ELP Link IV Software

Depending on the configuration of your equipment, you may not need all these components.

Save all packaging materials in case you need to ship the projector in the future. It should be transported in its original packaging or the equivalent.

■

Additional Components

Depending on how you plan to use the projector, you may need these additional components:

• To receive an S-Video signal, you need an S-Video cable. (One is usually provided with your video device.) A separate cable is required for each video source.

• To connect the projector to a Macintosh PowerBook, you need a video-out cable.

(One is provided by/or can be purchased from Apple for all new PowerBooks that have video-out capability.) If your PowerBook does not include one, see your Macintosh dealer.

• To connect the mouse cable to your computer, you may require a special connector, cable, or other components. You can obtain these items from your computer dealer. If your computer doesn’t have a mouse connector, you cannot use the mouse cable.

♦

Note:

You can connect a Kensington MicroSaver® anti-theft device in the hole on the projector’s right side. Contact your computer dealer.

Unpacking the Projector

■ ■ ■ ■ ■

Setting Up the Projector

1. Place the projector on a sturdy, level surface within five

feet of the computer or video source.

♦

Caution:

Do not hold the projector by the lens. This can damage

the lens.

2. Place the projector at a correct distance from the screen.

The distance between the projector and the screen determines the actual image size. Use the general guidelines below to determine the correct distance.

EMP-7350/7250

Screen size Horizontal distance from projector to screen

300 inches (610x460cm)511.8 inches (13.0 m) ~ 626.0inches (15.9m) 200 inches (410x300cm) 342.5 inches (8.7 m) ~ 413.4 inches (10.5m) 100 inches (200x150cm) 169.3 inches (4.3 m) ~ 204.7 inches (5.2 m) 80 inches (160x120cm) 133.9 inches (3.4m) ~ 165.4 inches (4.2 m) 60 inches (120x90cm) 102.4 inches (2.6 m) ~ 122.0 inches (3.1 m) 40 inches (81x61cm) 66.9 inches (1.7 m) ~ 78.7 inches (2.0 m) 30 inches (61x46cm) 47.2 inches (1.2 m) ~ 59.1 inches (1.5 m)

EMP-5350

Screen size Horizontal distance from projector to screen

■ ■ ■ ■

300 inches (610x460cm)515.7 inches (13.1 m) ~ 618.1 inches (15.7 m) 200 inches (410x300cm) 342.5 inches (8.7 m) ~ 409.4inches (10.4 m) 100 inches (200x150cm) 169.3 inches (4.3 m) ~ 204.7inches (5.2m) 80 inches (160x120cm) 133.9 inches (3.4 m) ~ 165.4 inches (4.2 m) 60 inches (120x90cm) 102.4 inches (2.6 m) ~ 122.0 inches (3.1 m) 40 inches (81x61cm) 66.9 inches (1.7 m) ~ 78.7 inches (2.0 m) 30 inches (61x46cm) 47.2 inches (1.2 m) ~ 59.1 inches (1.5 m)

■

♦

Note:

When using the optional lens, refer to the Owner’s manuals attached to it.

3. Turn the projector so that the lens is at right angles to the

screen. If the projector is not angled correctly, the screen image will be crooked.

4. Connect one end of the power cable to the projector’s

power connector. Connect the other end to an earthed electrical socket. The projector should be in sleep mode, indicated by an orange power indicator.

♦

Warning:

Never look into the lens when the projector is on. There is a risk that the projector might come on suddenly even though it is not in use. The light from the lamp can damage your eyes. It is especially important that children should not be allowed to look into the lens.

5. To insert the batteries in the remote control device, slide

off the battery compartment cover.

Setting Up the Projector

■ ■ ■ ■ ■

6. Insert the two AA batteries included with the projector.

Make sure the polarity of the batteries is correct.

7. Replace the battery compartment cover. When replacing batteries, take the following precautions:

• Do not recharge the used batteries or expose to fire or

water.

• Replace batteries as soon as they run out. If the batteries

leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash them immediately.

• Remove the batteries if you will not be using the projector

for a long period of time.

■ ■ ■ ■

■

Connecting to a Computer

You can connect the projector to a computer capable of SVGA, VGA, SXGA, XGA and UXGA (EMP-7350/7250 only) output.

Resizing is supported for VGA, SVGA, SXGA and UXGA (EMP-7350/7250) output, for VGA, XGA and SXGA output (EMP-5350). The following types of computers are supported:

• IBM desktop PC or compatible

• IBM laptop or compatible

• Apple Macintosh desktop computer, including Macintosh

Quadra®, Macintosh Centris®, and Power Macintosh

• Any Apple PowerBook with video-out capability, including

all 160, 165, 180 and 500 series PowerBooks

To connect the video and mouse cables (to use the wireless remote as a mousepointer), see the section in this chapter that applies to your computer.

The illustration below identifies all the interface ports on the back of the projector; you may want to refer to this as you connect your computer or other equipment to the projector.

Remote

Computer Out

Power Inlet

Audio Out Audio 1Audio 2

S-Video

R/R-Y G/Y G Sync B/B-Y

Video

Mouse/Com 2

Connecting to a Computer

Mouse/Com 1

Computer 2

Computer 1

BNC HD/Sync VD

L-Audio-R

■ ■ ■ ■ ■

Connecting to a PC Desktop Computer

To connect the projector to your PC desktop computer, you need to:

• Connect the computer cable and computer monitor cable

• Connect the mouse and/or serial cable (if you want to use

the remote control as a mouse or use the ELP Link IV software)

• Connect the audio cable (if you’ll be projecting with audio) Follow the steps in each section for the cables you need to

connect. Before beginning, turn off the projector and computer if they are on.

♦

Note:

Computer configurations vary. See your computer manual for the location of the ports needed to connect your projector.

Connecting the Video and Monitor Cables

First connect the computer cable and computer monitor cable. Refer to this illustration while following the steps below.

Computer 1 port

computer cable

Computer Out port

monitor cable

■ ■ ■ ■

■

1. If you will be viewing the video on your computer

monitor as well as the projector screen, disconnect the monitor cable from the video port on the back of your computer. Then connect the monitor cable to the projector’s Computer Out port, as shown below. (This is useful when you need to view the video output, but the projection screen is behind you.)

2. Connect one end of the computer cable to the projector’s

Computer 1 port. (Use the Computer 2 port if you are connecting a second computer.)

3. Connect the other end of the computer cable to the

computer’s video port.

4. Tighten the screws on all connectors.

Connecting to a Computer

■ ■ ■ ■ ■

Connecting the Mouse and Serial Cables

If you want to use the remote control as a mouse or use the ELP Link IV software, you need to connect the main cable. It provides connectors for:

• The PS/2 mouse cable or USB mouse cable (to use the

remote control as a mouse)

• The serial cable (to use the ELP Link IV software and the

Effects buttons on the remote control)

Refer to this illustration while following the steps below.

PS/2 mouse cable

Mouse/Com 1 port

9-pin serial cable

main cable

(or USB mouse cable)

■ ■ ■ ■

1. Connect the small end of the main cable to the projector’s

Mouse/Com 1 port. (Use the Mouse/Com 2 port if you are connecting a second computer.)

+ 98 hidden pages