Page 1
L3150
Start Here
2 Unpack the black (BK) ink bottle. Hold the ink bottle
upright and slowly turn the bottle cap to remove it.
Read these instructions before using your product.
1
Unpack
Note: Do not open the ink bottles until you are ready to fill the ink
tanks. The ink bottles are vacuum packed to maintain reliability.
Remove all protective materials from the product.
Caution: Do not shake or squeeze the ink bottles. Do not touch
the top of the ink bottle after its cap is removed.
3 Position the top of the ink bottle along the front of the
filling port, then slowly stand the bottle upright to insert it.
Note: Do not force the bottles into position; they are keyed for
each color.
4 Wait for the ink to fill the tank. Do not squeeze the bottle.
Note: Do not turn on the product yet.
2
Fill ink tanks
Caution:
• This product requires careful handling of ink. If ink spills, wipe it off
immediately with a damp towel to avoid permanent stains. If ink
gets on your clothes or belongings, it may not come off.
• Epson cannot guarantee the quality or reliability of non-genuine ink.
The use of non-genuine ink may cause damage that is not covered
by Epson’s warranty.
Warning: Keep the ink bottles out of the reach of children and do not
drink the ink.
1 Open the ink tank cover and the cap for the black ink
tank.
Note: Ink flows into the tank and stops automatically when the
ink tank is filled to the upper line. If ink does not flow from the
bottle, lift and reinsert the bottle.
5 When the ink tank is full, remove the ink bottle and
securely close it with the bottle cap.
Note: Do not leave the ink bottle inserted; otherwise the bottle
may be damaged or ink may leak. If any ink remains in the bottle,
store the bottle upright for later use.
Note: Refer to the color-coded sticker on the ink tank unit to
identify the color of each tank.
Page 2
6 Close the black ink tank cap.
3 Press and hold the stop button for 5 seconds until the
power light starts to blink and ink charging begins.
7 Repeat the previous steps for the other colors.
8 Close the ink tank cover.
3
Turn on and charge the ink
1 Connect the power cord to the back of the product and to
an electrical outlet.
Note: Ink charging takes about 10 minutes. When the power
light stops blinking, ink charging is complete.
Caution: Do not turn off the product, open the front cover, or
load paper while the product is charging or you’ll waste ink.
Note: Use the ink bottles included with the printer to set up the
product. Part of the ink will be used to charge the print head. These
bottles may print fewer pages compared with subsequent ink bottles.
4
Load paper
See the online User’s Guide for information about loading
capacity and available paper types and sizes.
Caution: Do not connect to your computer yet.
2 Press the power button to turn on the product, then
wait for the ink light to turn on.
1 Make sure the product is not charging ink. Then flip the
feeder guard forward, raise the paper support, and tilt it
backwards slightly.
2 Slide the edge guides all the way out.
Page 3
3 Load A4- or letter-size paper, glossy or printable side up
and short edge first, in the middle of the rear paper feed
slot.
4 Slide the edge guides against the paper, but not too
tightly, then flip the rear feeder guard back.
5 Pull out the output tray, then raise the paper stopper.
3 Follow the instructions on the computer screen to run the
setup program.
4 When you see the Select Your Connection screen, select
one of the following:
• Wireless connection
In most cases, the software installer automatically
attempts to set up your wireless connection. If setup
is unsuccessful, you may need to enter your network
name (SSID) and password.
• Direct USB connection
Make sure you have the USB cable ready.
Mobile printing
Connect wirelessly from your smartphone, tablet, or computer.
Print documents and photos from across the room or around
the world:
• Print directly from a smartphone or tablet using iOS or
Android™ with Epson iPrint™. Simply connect your printer
and device to the same network and tap the action icon to
select the print option.
5
Install software
Note: If you are using a Mac or your computer does not have a
CD/DVD drive, an Internet connection is required to obtain the product
software.
To print from a Chromebook™, go to
www.epson.com.jm/support/gcp for instructions.
1 Make sure the product is NOT CONNECTED to your
computer.
• Use Epson Print Enabler (free from Google Play™) with
Android devices (v4.4 or later). Then connect your printer
and device to the same network and tap the menu icon to
select the print option.
• Print remotely with Epson Connect™ and Google Cloud
Print™. See your online User’s Guide for instructions or
learn more at www.epson.com.jm/connect.
Any problems?
Network setup was unsuccessful.
• Make sure you select the right network name (SSID).
• Restart your router (turn it off and then on), then try to
connect to it again.
• The printer can only connect to a network that supports
2.4 GHz connections. If your router offers both 2.4 GHz
and 5 GHz connections, make sure 2.4 GHz is enabled.
• If you see a firewall alert message, click Unblock or Allow
to let setup continue.
Windows®: If you see a Found New Hardware screen, click
Cancel and disconnect the USB cable.
2 Insert the product CD (Windows only) or download and
run your product’s software package. For the latest
software, visit www.epson.com.jm/support/L3150.
There are lines or incorrect colors in my printouts.
Run a nozzle check to see if there are any clogged nozzles.
Then clean the print head, if necessary. See the online User’s
Guide for more information.
Page 4
Setup is unable to find my product after connecting it
with a USB cable.
Make sure your product is on and securely connected as
shown:
Any questions?
Need paper and ink?
Ensure peak performance and brilliant results
with Genuine Epson® Ink and specialty
papers, engineered specifically for Epson
printers. You can purchase them from an
Epson authorized reseller. To find the nearest
one, visit www.epson.com.jm or contact
Epson as described in “Any questions?” on
this sheet.
L3150 replacement inks
Color Part number
User’s Guide
Windows: Click the icon on your desktop or Apps screen to
access the online User’s Guide.
Mac: Click the icon in Applications/Epson Software/Guide
to access the online User’s Guide.
If you don’t have a User’s Guide icon, go to the Epson website,
as described below.
Technical support
Visit www.epson.com.jm/support/L3150 to download drivers,
view manuals, get FAQs, or contact Epson.
You can also speak to a service technician by calling one of
these numbers:
Argentina (54 11) 5167-0300 Guatemala* 1-800-835-0358
0800-288-37766 Mexico 01-800-087-1080
Bolivia* 800-100-116 Mexico City (52 55) 1323-2052
Chile (56 2) 2484-3400 Nicaragua* 00-1-800-226-0368
Colombia 018000-915235 Panama* 00-800-052-1376
Bogota (57 1) 523-5000 Paraguay 009-800-521-0019
Costa Rica 800-377-6627 Peru 0800-10126
Dominican Lima (51 1) 418-0210
Republic* 1-888-760-0068 Uruguay 00040-5210067
Ecuador* 1-800-000-044 Venezuela (58 212) 240-1111
El Salvador* 800-6570
Black 544
Cyan 544
Magenta 544
Yellow 544
* Contact your local phone company to call this toll-free number from a mobile
phone.
If your country does not appear on the list, contact your
nearest Epson sales office. Toll or long distance charges
may apply.
EPSON is a registered trademark, EPSON Exceed Your Vision is a registered logomark, and
Epson Connect and Epson iPrint are trademarks of Seiko Epson Corporation.
Designed for Excellence is a trademark of Epson America, Inc.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
Android, Google Cloud Print, Chromebook, and Google Play are trademarks of Google Inc.
General Notice: Other product names used herein are for identification purposes only and may
be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2018 Epson America, Inc., 3/18
Printed in XXXXXX
CPD-55460
Loading...