EIC SB250S, SB230S, SB220S, SB240S, SB260S Datasheet
...
SB220S - SB2B0S
PRV : 20 - 100 Volts
IO : 2.0 Amperes
FEATURES :
*High current capability
*High surge current capability
*High reliability
*High efficiency
*Low power loss
*Low cost
*Low forward voltage drop
MECHANICAL DATA :
*Case : DO-41 Molded plastic
*Epoxy : UL94V-O rate flame retardant
*Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed
*Polarity : Color band denotes cathode end
*Mounting position : Any
*Weight : 0.339 gram
SCHOTTKY BARRIER RECTIFIER DIODES
DO-41
1.00 (25.4)
0.107 (2.74) MIN.
0.080 (2.03)
0.205 (5.20)
0.160 (4.10)
1.00 (25.4)
0.034 (0.86) MIN.
0.028 (0.71)
Dimensions in inches and ( millimeters )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING |
SYMBOL |
SB |
SB |
SB |
SB |
SB |
SB |
SB |
|
SB |
SB |
UNIT |
220S |
230S |
240S |
250S |
260S |
270S |
280S |
|
290S |
2B0S |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum Recurrent Peak Reverse Voltage |
VRRM |
20 |
30 |
40 |
50 |
60 |
70 |
80 |
|
90 |
100 |
Volts |
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum RMS Voltage |
VRMS |
14 |
21 |
28 |
35 |
42 |
49 |
56 |
|
63 |
70 |
Volts |
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum DC Blocking Voltage |
VDC |
20 |
30 |
40 |
50 |
60 |
70 |
80 |
|
90 |
100 |
Volts |
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum Average Forward Current |
|
|
|
|
|
|
|
|
|
|
|
|
0.375", 9.5mm Lead Length See Fig.1 |
IF(AV) |
|
|
|
|
2.0 |
|
|
|
|
|
Amps. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Peak Forward Surge Current, |
|
|
|
|
|
|
|
|
|
|
|
|
8.3ms single half sine wave superimposed |
|
|
|
|
|
|
|
|
|
|
|
|
on rated load (JEDEC Method) |
IFSM |
|
|
|
|
60 |
|
|
|
|
|
Amps. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum Forward Voltage at IF = 2.0 Amps. (Note 1) |
VF |
|
0.5 |
|
|
0.74 |
|
|
|
0.79 |
|
Volt. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Maximum Reverse Current at |
|
|
|
|
|
|
|
|
|
|
|
|
Rated DC Blocking Voltage (Note 1) |
IR |
|
|
|
|
0.5 |
|
|
|
|
|
mA |
|
|
|
|
|
|
|
|
|
|
|||
Junction Temperature Range |
TJ |
- 65 to + 125 |
|
|
- 65 to + 150 |
|
|
°C |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Storage Temperature Range |
TSTG |
|
|
|
- 65 to + 150 |
|
|
|
|
°C |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Notes : |
|
|
|
|
|
|
|
|
|
|
|
|
(1) Pulse Test : Pulse Width = 300 μs, Duty Cycle = 2%. |
|
|
|
|
|
|
UPDATE : MAY 10, 1999 |
|||||
Loading...