EIC SROJ, SROG, SROD, SROB, SROM Datasheet

GROA - GROM

PRV : 50 - 1000 Volts

Io : 1.5 Amperes

FEATURES :

*Glass passivated chip

*High current capability

*High reliability

*Low reverse current

*Low forward voltage drop

*Fast switching for high efficiency

MECHANICAL DATA :

*Case : SMA Molded plastic

*Epoxy : UL94V-O rate flame retardant

*Lead : Lead Formed for Surface Mount

*Polarity : Color band denotes cathode end

*Mounting position : Any

*Weight : 0.067 gram

GLASS PASSIVATED JUNCTION FAST RECOVERY RECTIFIERS

SMA (DO-214AC)

5.0 ± 0.15	4.5 ± 0.15	1.1 ± 0.3
1.2 ± 0.2		0.2 ± 0.07
2.6 ± 0.15		2.1 ± 0.2

2.0 ± 0.2

Dimensions in millimeter

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Rating at 25 °C ambient temperature unless otherwise specified.

Single phase, half wave, 60 Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

RATING		SYMBOL	SROA	SROB	SROD		SROG	SROJ	SROK	SROM	UNIT
Maximum Recurrent Peak Reverse Voltage		VRRM	50	100		200	400	600	800	1000	V
Maximum RMS Voltage		VRMS	35	70		140	280	420	560	700	V
Maximum DC Blocking Voltage		VDC	50	100		200	400	600	800	1000	V
Maximum Average Forward Current	Ta = 55 °C	IF(AV)					1.5				A
Peak Forward Surge Current, 8.3ms Single half sine wave
Superimposed on rated load (JEDEC Method)		IFSM					60				A
Maximum Peak Forward Voltage at IF = 1.5 A		VF					1.4				V
Maximum DC Reverse Current	Ta = 25 °C	IR					5.0				μA
at Rated DC Blocking Voltage	Ta = 100 °C	IR(H)					50				μA
Maximum Reverse Recovery Time ( Note 1 )		Trr		150				250	500		ns
Typical Junction Capacitance ( Note 2 )		CJ					25				pf
Junction Temperature Range		TJ				- 65 to + 150					°C
Storage Temperature Range		TSTG				- 65 to + 150					°C

Notes :

( 1 ) Reverse Recovery Test Conditions : IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A. ( 2 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC

Page 1 of 2

Rev. 01 : April 2, 2002