EIC SN22, SN23, SN24, SN25, SN21 Datasheet

SN21 - SN25

PRV : 200 - 1300 Volts

Io : 3.0 Amperes

FEATURES :

*High current capability

*High surge current capability

*High reliability

*Low reverse current

*Low forward voltage drop

MECHANICAL DATA :

*Case : SMC Molded plastic

*Epoxy : UL94V-O rate flame retardant

*Lead : Lead Formed for Surface Mount

*Polarity : Color band denotes cathode end

*Mounting position : Any

*Weight : 0.21 gram

SURFACE MOUNT RECTIFIERS

SMC (DO-214AB)

																												0.060(1.5 2)
									0.320(8.13)		0.305(7.75)		0.280(7.11)			0.260(6.60)												0.030(0.7 6)
																										0.008(0.203)
																										0.004(0.102)
							0.121(3.07)																						0.012(0.305)
							0.115(2.92)
																								0.006(0.152)
																	0.103(2.62 )
									0.245(6.2 2)
									0.220(5.5 9)							0.079(2.00 )

Dimensions in inches and (millimeter)

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Rating at 25 °C ambient temperature unless otherwise specified.

Single phase, half wave, 60 Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

RATING		SYMBOL	SN21	SN22		SN23		SN24	SN25	UNIT
Maximum Repetitive Peak Reverse Voltage		VRRM	200	400		600		800	1300	V
Maximum RMS Voltage		VRMS	140	280		420		560	910	V
Maximum DC Blocking Voltage		VDC	200	400		600		800	1300	V
Maximum Average Forward Current	Ta = 50 °C	IF			3.0					A
Peak Forward Surge Current
8.3ms Single half sine wave Superimposed
on rated load (JEDEC Method)		IFSM			100					A
Maximum Forward Voltage at IF = 3.0 Amps.		VF			1.1					V
Maximum DC Reverse Current	Ta = 25 °C	IR			20					μA
at rated DC Blocking Voltage	Ta = 100 °C	IR(H)			50					μA
Typical Junction Capacitance (Note1)		CJ			50					pF
Junction Temperature Range		TJ			- 65 to + 150					°C
Storage Temperature Range		TSTG			- 65 to + 150					°C

Notes :

(1) Measured at 1.0 MHz and applied reverse voltage of 4.0VDC

Page 1 of 2

Rev. 01 : Mar 23, 2002