DYMO Organizer Xpres User's Guide

Organizer Xpress Guide

Extend the embossing tape about
one inch. This will allow for easier
loading in the Organizer Xpress.

Insert the embossing tape into the
slot located at the top of the label
compartment. Feed the tape in as far
as you can. Place the embossing
tape in the label compartment.
Squeeze the handle two times to help
feed the tape through the unit.

Grab ahold of the door located on

the handle of the Organizer Xpress

and pull to open.

Close the label compartment door.

Squeeze the handle two more times

to continue feeding the tape through

the unit.

Turn the wheel to select different
characters.

Select the symbol.

Firmly squeeze the handle. Normally

the will cut the tape,
however while loading a new roll of
tape you can select this symbol to
help feed the tape through the unit.

Turn the wheel and select the V symbol.

Firmly squeeze the handle twice to
continue feeding the embossing tape
through the Organizer Xpress.

Once you have selected the character
you’d like to emboss, firmly squeeze
the handle on the Organizer Xpress.
Repeat steps 10 – 11 to emboss the
desired text on the tape.

Turn the wheel to the desired

character.

The V symbol allows you to

advance the tape. It allows you to

place blank spaces between words

and characters.