Dymo MobileLabeler Service Manual
User Guide
BC
Copyright
© 2016 Newell Rubbermaid Europe LLC. All rights reserved. Revised 10/14/16
No part of this document or the software may be reproduced or transmitted in any form or
by any means or translated into another language without the prior written consent of
Newell Rubbermaid Europe LLC.
Trademarks
DYMO is a registered mark in the U.S. and other countries.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other
countries. App Store is a service mark of Apple Inc.
IOS is a trademark or registered trademark of Cisco in the U.S. and other countries.
®
The Bluetooth
SIG, Inc. and used under license.
Android, Google Play and the Google Play logo are trademarks of Google Inc.
All other trademarks are the property of their respective holders.
“Made for iPhone” and “Made for iPad” mean that an electronic accessory has been
designed to connect specifically to iPhone or iPad, respectively, and has been certified by
the developer to meet Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory standards. Please note
that the use of this accessory with iPhone or iPad may affect wireless performance.
word mark and logos are registered trademarks owned by the Bluetooth
Product® Name
3
User Guide
1 About Your New Label Maker
1 Registering Your Label Maker
1 Wireless Safety Warnings
2 Safety Precautions for Lithium-Polymer Rechargeable Battery
2 General Safety Precautions
4 Getting to Know the Label Maker
5Power
5 Power Status Light
5 Battery Status Light
5 Bluetooth Connection
6 Bluetooth Status Light
6RESET
7Getting Started
7 Connecting the Power
7 Inserting the Battery
7 Removing the Battery
8Charging the Battery
9 Inserting the Label Cassette
9 Cutting the Labels
10 Printing Labels from a Mobile Device
10 Pairing the Label Maker to your Mobile Device
10 Downloading the DYMO Connect App
11 About the DYMO Connect Mobile App
11 Home Screen
11 Design Screen
12 Printing Labels from your Computer
12 Downloading and Installing DYMO Label Software
12 Connecting your Label Maker to your Computer
13 About DYMO Label Software
13 Label Maker Status
14 Caring for the Label Maker
14 Cleaning the Cutter Blade
15 Cleaning the Print Head
16 Troubleshooting
16 General
17 Bluetooth Connection
18 Technical Specifications
19 Documentation Feedback
19 Environmental Information
DYMO MobileLabeler
iii
User Guide
DYMO MobileLabeler
iv
User Guide
About Your New Label Maker
!
With the DYMO® MobileLabeler electronic label maker, you can create a wide
variety of high-quality, self-adhesive labels and print using Bluetooth
technology from your Apple
your Windows
®
or Mac computer using Bluetooth wireless technology or the
®
or Android™ mobile device. You can also print from
®
wireless
included USB cable.
You can choose to print your labels in many different fonts, font sizes, and styles.
The label maker uses DYMO D1 label cassettes in widths of 6 mm (1/4”), 9 mm (3/
8”), 12 mm (1/2”), 19 mm (3/4”), or 24 mm (1”). Labels are available in a wide
range of colors.
Visit www.dymo.com for information on obtaining labels and accessories for your
label maker.
Registering Your Label Maker
Visit www.dymo.com/register to register your label maker online. During the
registration process, you will need the serial number, which is located on the
bottom of the label maker. See Figure 1 on page 4.
Register your label maker to receive these benefits:
An additional one year of warranty
Email notification of free software upgrades
Special offers and new product announcements
Wireless Safety Warnings
Nearly every electronic device is susceptible to electromagnetic interference (EMI)
if inadequately shielded, designed, or otherwise configured for electromagnetic
compatibility.
Similar to a mobile phone, your DYMO device is a low power transmitter/receiver
and is covered by regulations pertaining to such devices.
Turn off your DYMO device in any facility where posted notices instruct you to
do so. These facilities may include hospitals or health care facilities that may
be using equipment that is sensitive to external RF energy.
Observe all signs and instructions that require an electrical device or RF radio
product to be switched off in designated areas, such as gas/refueling stations,
hospitals, blasting areas, potentially explosive atmospheres, or aircraft.
Some Bluetooth devices may interfere with some hearing aids. In the event of
such interference, you may want to consult your hearing aid manufacturer or
physician to discuss alternatives.
If you use any other personal medical device, consult the manufacturer of your
device to determine if it is adequately shielded from RF energy. Your doctor or
physician may be able to assist you in obtaining this information.
If you are in doubt about whether your device can be safely turned on or used,
please consult an authorized person in the location you want to use your
device. If no authorized person is available or you remain uncertain, DYMO
recommends that you turn off your Bluetooth device.
DYMO MobileLabeler
1
User Guide
Safety Precautions for Lithium-Polymer Rechargeable Battery
Battery Type: LiPolymer 7.4V 1500mAh 11.1Wh
Improper handling of a lithium-polymer rechargeable battery may cause leakage,
heat, smoke, an explosion, or fire. This could cause deterioration of performance
or failure. This may also damage the protection device installed in the battery. This
could damage equipment or injure users. Thoroughly follow the instructions
below.
Danger
!
Use the battery only in the MobileLabeler label maker.
Battery can only be charged while inserted in the label maker using the
charging adapter provided (9VDC/4A).
Do not connect directly to an electric outlet or cigarette lighter charger.
Do not store battery close to fire or inside the car where temperature may be
over 140°F (60°C).
Warning
!
Stop charging the battery if charging is not completed within three hours.
Caution
!
Do not use the label maker or battery in a place that generates static
electricity.
Use the label maker only at room temperature.
Battery can only be charged within +50°F~86°F (+10°C~30°C) temperature
range.
General Safety Precautions
Follow the guidelines in this section to use this product safely. In addition, make
sure to read the Safety Precautions for Lithium-Polymer Rechargeable
Battery on page 2.
Charging Adapter and Power Cord
Only use the charging adapter and power cord that came with the label
maker.
Do not handle charging adapter or power cord if your hands are wet.
Do not cut, damage, alter, or place heavy objects on the charging adapter or
power cord.
Do not use the charging adapter or power cord if either are damaged.
Label Maker
Only use the USB cable that came with the label maker.
Do not insert objects into or block the label exit slot.
Do not touch the cutter blade. Personal injury could result.
Do not allow any liquids to come into contact with the label maker.
Do not disassemble the label maker. For inspection, adjustment, or repair,
contact DYMO Customer Support (http://support.dymo.com).
DYMO MobileLabeler
2
User Guide
Unplug the power cord immediately if you notice any abnormal odor, heat,
smoke, discoloration, deformation, or anything unusual while the label maker
is in use.
DYMO D1 Label Cassettes
Use only DYMO-branded D1 label cassettes in this label maker.
Do not use any unauthorized accessories or supplies.
Clean the surface before applying the adhesive label or the label may not
adhere correctly and could peel off easily.
Do not expose the labels to extreme heat or sunlight.
DYMO MobileLabeler
3
User Guide
Loading...