Dual XDVD8281 User Manual

TOUCH
XDVD8281
INSTALLATION/OWNER’S MANUAL
DVD Multimedia Receiver with 6.5” Touch Screen Display
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
Copyright Notes
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and or other countries.
All other trademarks are property of their respective owners.
XDVD8281 PREPARATION
Table of Contents
DVD Region Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparation/Mounting/Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote Control Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Locations - Monitor Closed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Locations - Monitor Open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Locations - Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Anti-theft Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AM/FM Tuner Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MP3/WMA Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Media Compatibility Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page
2
3
4
5-7
8
9
12
13
15-17
18-20
21
22
23-26
27-30
31
32-40
41-43
44-48
49-52
53-54
55
56
57
DVD Region Management
Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD8281 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. This player has been designed to play back DVD software that has been encoded for specific region areas. It cannot play back DVD software encoded for other region areas than the region areas for which it has been designed.
The XDVD8281 will play discs labeled “Region 1” or “All”.
DVD region codes:
1 - USA, Canada 2 - Japan, Europe, South Africa, Middle East 3 - Rep. of Korea, Taiwan, Hong Kong, Parts of Southeast Asia 4 - Australia, New Zealand, Mexico, South America 5 - Eastern Europe, Russia, India, Africa 6 - China
2
XDVD8281 PREPARATION
WARNING
Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle
must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.
Several states prohibit the installation of monitors/DVD players if the screen is visible from
the driver’s seat. If you reside in a jurisdiction which has enacted such a law, this unit must not be installed so that the screen is visible from the driver’s seat. When installing this unit in the front console/dashboard, the unit must be positioned so that it is facing the front passenger seat only. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.
This unit is designed so that it may be operated only when the vehicle is in “Park” and the
parking brake is fully engaged. To this end, this unit includes a parking brake lock-out feature which prohibits the unit from operating if the vehicle is not in “Park” and/or the parking brake is not fully engaged. When installing this unit, the installer must connect the parking brake detect wire (“Yellow-Blue Lead”) to the parking brake mechanism in order to make the parking brake lock-out feature operable. DO NOT simply ground the parking brake detect wire to a metal portion of the vehicle. Failure to properly install the parking brake lock-out feature could lead to driver distraction which could result in serious injury or death to the driver’s occupants or persons outside the vehicle and/or property damage.
Once the parking brake lock-out feature is installed, the owner/user must not attempt to
disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking brake and/or (b) purchasing/using any device or unit designed to send necessary brake signals to the unit. Failure to follow these instructions could lead to driver distraction which could result in serious injury or death to the driver’s occupants or persons outside the vehicle and/or property damage.
When operating this unit, keep the unit’s volume level low enough so that the vehicle’s
occupants can hear traffic-related sounds such as police and emergency vehicles. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.
3
XDVD8281 OPERATION
Safety Information
Please read all instructions carefully before attempting to install or operate.
Due to its technical nature, it is highly recommended that your DUAL XDVD8281 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only.
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
To prevent damage or injury:
1. Make sure to ground the unit securely to the vehicle chassis ground.
2. Do not remove the top or bottom covers of the unit.
3. Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing.
4. Do not subject the unit to excessive shock.
5. When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause the unit to malfunction.
6. To prevent short circuits when replacing a fuse, disconnect the wiring harness first.
7. Use only the provided hardware and wire harness.
8. You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake.
9. If you experience problems during installation, consult your nearest DUAL dealer.
10. If the unit malfunctions, reset the unit as described on page 12 nearest DUAL dealer or call tech assistance @ 1-866-382-5476.
11. To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.
12. When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than usual. Normal brightness will return after using the monitor for a while.
first. If the problem still persists, consult your
Additional Notes:
1. When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables
with an area of 0.75mm (AWG 18) or more to prevent voltage drops.
2. Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous
to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately.
This device complies with part 15 of the FCC rules and regulations. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operation.
4
XDVD8281 INSTALLATION
Preparation
Please read entire manual before installation.
Before You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it
would be subject to dust, dirt or excessive vibration.
Getting Started
• Insert the supplied keys between the radio and the sleeve at the left and right sides, and slide the unit out of the
mounting sleeve.
Mounting Options
1. Rear ISO-DIN (using OEM factory radio mounting brackets):
• Remove factory radio mounting brackets and attach to the left and right sides of the XDVD8281 chassis.
• See diagram below.
2. Front load (using mounting sleeve):
• Install mounting sleeve into opening, bending tabs to secure.
• Connect wiring harness and antenna as shown on page 6. Consult a qualified technician if you are unsure.
• Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately).
• Test for correct operation and mount according your application.
• If required, snap desired trim ring into place.
• Mount the iplug™ adapter to any smooth clean surface using the supplied double-sided tape or Phillips head
screws.
Mounting the XDVD8281 using OEM factory
mounting brackets.
5
Mounting the XDVD8281 using mounting
sleeve (front load).
XDVD8281 INSTALLATION
Expanded Wiring Diagram - Inputs/Outputs
Wiring Notes:
Subwoofer output
The SUBWOOFER audio output (Blue RCA) is active in all audio modes and must be connected to an external amplifier.
Rear view camera
A rear view camera (not included) can be used with CAMERA input.
NEED HELP??
Call our Technical Service Hotline, 1-866-382-5476
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. Altering or defeating this safety feature is a violation of law and is prohibited.
6
XDVD8281 INSTALLATION
Wiring Diagram - Optional A/V Connections
7
XDVD8281 OPERATION
IR Remote Preparation
To first use the IR Remote control,
you must first pull the battery
insulation tape out
Insert or replacing the Battery:
Remove the battery holder
Remove the battery from the battery
holder
Notes:
Remove the battery if the remote will
• not be used for a month or longer Remove and dispose of battery properly
Install the new battery
Make sure to keep the (+) side up
Insert the battery holder
CAUTION!!!
Do not store battery with metallic
• objects or materials
8
XDVD8281 OPERATION
Control Locations - Monitor Closed
1
2
3
4
5
6
Power/Mute
1
AM/FM Mode - Hotkey
2
Auto Store/Preset Scan
3
Mode
4
Menu
5
6
Rotary Encoder/Enter
7
DVD Mode - Hotkey
Channel/Chapter/Track Up
8
Channel/Chapter/Track Down
9
Play/Pause
10
Info/Picture
11
12
Reset
13
Open/Close Monitor/Angle Adjust
7
8
9
10
11
12
13
Monitor Notes:
This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will
• not obstruct the dash, shifter or any other controls.
Upon installation, do not attempt to move the monitor by hand. Use the the OPEN button on the remote control. The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the
• obstacle and press or OPEN again to resume the monitor open/close sequence.
9
button on the front panel only or
XDVD8281 OPERATION
Control Functions - Monitor Closed
Power On/Off
Mute
AM/FM Mode - Hotkey
AS/PS
Mode
Menu
Rapid Dial Rotary Encoder
Press to turn the unit on. Hold for 3 seconds to turn the unit off. Press MUTE to silence the audio; 00 will appear in the OSD (On Screen Display). Press MUTE again to cancel.
Press AM/FM to select radio tuner mode. If the unit is already in tuner mode, press AM/FM to select between FM1, FM2, FM3, and AM bands.
Press AS/PS momentarily to start station PRESET SCAN function, Press AS/PS for 2 seconds to start AUTO STORE station preset function in current BAND.
Press MODE to select between the unit’s available modes, such as: Tuner, DVD (which includes CD and MP3/WMA playback), Aux AV in and Camera inputs. Each time the MODE button is pressed the next mode is chosen. Modes of operation are indicated on the OSD.
Press MENU to display the main menu, along with the setup sub-menus. Press MENU again to return to the current mode.
Press to toggle between the Volume and Select functions. When idle, push and hold for 3 seconds to enter the Audio Setup Menu.
Volume
Select
DVD Mode - Hotkey
Normally, the rotary controls the volume, which is visible as a number from 0 to 40, to the right of the volume icon displayed on the screen. When the icon is not displayed, turn the rotary to display the volume level. Turning the rotary while the volume is muted will cancel the mute function.
Note: To program the default volume level when the unit is turned on: turn the rotary to the desired level, then push and hold the rotary for 3 seconds to program the current volume level.
Turning the rotary while it’s in select mode will allow you to perform various functions and settings depending on the mode/screen displayed. Generally, turning the rotary will let you move through the choices and pushing the rotary will select the highlighted choice.
Press DVD to select Disc mode.
Notes:
• Depending on the type of disc loaded, the Disc mode can be CD, MP3/WMA or DVD.
• This button is not active when there is no disc loaded.
10
XDVD8281 OPERATION
Control Functions - Monitor Closed
Up Arrow
Down Arrow
Play/Pause
Info/Picture
Monitor Open/Close
Angle Position
Reset
This button performs different functions depending on the current mode. A detailed description of the button can be found in each individual section.
This button performs different functions depending on the current mode. A detailed description of the button can be found in each individual section.
Press to pause or continue playback of an audio or video track.
Press to display DVD disc information in DVD mode. Holding this button for 3 seconds brings up the Brightness setting, which can be controlled by the rotary encoder or by pressing the / buttons on the main remote control.
Press momentarily to toggle between fully open and the current angle. Hold for more than 1 second to adjust the view angle up and down and release to keep desired viewing angle.
If you experience abnormal operation or, your unit is inoperable, press the RESET button located on the front bottom-right corner of the unit. After a system reset, the unit resets the main processor (but not the default settings).
Notes: Use the tip of a pen to access the reset button. To restore the factory default settings, refer to page 19.
Caution
Monitor Notes:
• The angle can also be manually selected via the screen setup menu.
• The color of the LCD monitor varies between viewing angles. Select the angle with the most optimum view for your location.
• The last position of the monitor can be saved in memory. When “TFT Auto Open” is selected in the General Setup Menu, the monitor will return to its last position automatically the next time the unit is turned on.
• Due to its highly technological design, the XDVD8281 faceplate is removable. Do not attempt to remove the faceplate.
• Upon installation, do not attempt to move the monitor by hand. Use the button on the front panel only or the OPEN button on the remote control.
• The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the obstacle and press or OPEN again to resume the monitor open/close sequence.
NOT
11
XDVD8281 OPERATION
Control Locations and Functions - Monitor Open
1
2
3
Disc slot
1
Disc-in indicator
2
Red = Disc inserted Blue = No disc inserted
When the panel is fully open, press to eject the disc.
3
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
12
XDVD8281 OPERATION
Control Locations - Remote
2
1
5 8
6
3
4
7
Mode
1
Mute
2
Open/Close
3
Power
4
Key #1
5
Key #2
6
Key #3
7
Volume Up
8
Key #4
9
Key #5
10
Key #6
11
Volume Down
12
Key #7
13
Key #8
14
Key #9
15
109
13
14
17
18
22
21
26
25
30
33
34
37 38
Info
16
Search
17
Key #0
18
Band/Stop
19
Audio Select
20
Escape
21
4-Way - Up
22
Menu
23
Picture
24
4-Way - Left
25
OK/Play/Pause
26
4-Way - Right
27
Repeat A-B
28
Title Menu
29
4-Way - Down
30
11
15
19
23
27
3129
35
39
12
16
20
24
28
32
36
40
Root
31
Repeat
32
Chapter/Track Down
33
Chapter/Track Up
34
Fast Reverse
35
Fast Forward
36
Zoom
37
Audio
38
Angle
39
Sub-Title
40
* The remote control uses one 3 volt Lithium CR2025 battery. For best performance, replace only with CR2025 or equivalent.
13
XDVD8281 OPERATION
Control Functions - Remote
Mode
Mute
Open/Close
Power
Keys 0-9
Volume Up
Volume Down
Info
Search
Band/Stop
Audio Select
Escape
4-Way-Up/Down/Left/Right
Menu
Press once to incrementally select desired source.
Press once to MUTE audio, press again to return audio.
Press once to open monitor, press again to close the monitor.
Press once to turn the unit on, press again to turn unit off.
Direct access chapter/track/preset station for current BAND.
Increase VOLUME.
Decrease VOLUME.
Displays DVD information.
Search function in the DVD mode.
Press to increment BAND, or STOP while in DVD/MP3 mode.
Enter AUDIO Setup mode.
Exit current menu.
Navigating system and DVD menus.
Enter the MAIN system menu.
Picture
OK
Repeat A-B
Title Menu
Root Menu
Repeat
Chapter/Track Down
Chapter/Track Up
Fast Reverse
Fast Forward
Zoom
Audio
Angle
Sub-Title
BRIGHTNESS parameter setting for TFT.
Starts/pauses playback or confirm settings.
Repeat playback from time frame A to time frame B.
Enters the title menu on DVD.
Enters the main menu of the DVD.
Repeats playback of current chapter/track or folder.
Selects the previous chapter/track for playback.
Selects the next chapter/track for playback.
Fast reverses the disc content.
Fast forwards the disc content.
Zooming in/out on an image from DVD disc.
Change the audio language for DVD disc playback.
Selects between different angles (when available) for a scene.
Language selection for subtitle.
14
XDVD8281 OPERATION
General Operation
Power On/Off
Mute
Mode
Optional Mode Selection
Volume
Audio Adjustment
(from front panel)
Press to turn the unit on. Hold for 3 seconds to turn the unit off. Press MUTE to silence the audio; 00 will appear in the OSD (On Screen Display). Press MUTE again to cancel.
Press MODE to select between Tuner, Disc, Aux AV input and Camera. Modes of operation are indicated in the OSD (On Screen Display).
Press the top left corner of the screen to display the OSD menu bar. Press Tuner, Disc, Aux AV input or Camera input in the MAIN menu page to select the desired source.
Adjust VOLUME using rotary encoder or the VOL +/- buttons (00-40).
Press rotary knob for 3 seconds, then release. Press rotary momentarily to advance to desired parameter to be changed. Turn rotary Q or P to adjust to desired level. Press rotary to advance to next selection, and press and hold to exit.
Audio Settings
00
00
00
R
00
L
00
F
R
L
ITEM RANGE
USER FLAT
JAZZ POP
EQ
BASS -7 +7
TREBLE -7 +7
FADE -9 +9
BALANCE -9 +9
SUB -7 +7
LOUD OFF ON
CLASSIC ROCK
NEWS URBAN
RAVE MOVIE
TECHNO
15
Audio Adjustment
(from remote)
Press the SEL button. Press the p or q buttons on the remote to select an item to be adjusted. Press or to adjust the desired setting. Press the
ESC button on the remote control to exit the audio control menu.
Notes: The Bass and Treble levels are only adjustable when EQ is set to
"User” mode. The Loud function compensates for deficiencies in sound ranges at low levels. When the Loud function is on, LOUD is displayed in the OSD.
XDVD8281 OPERATION
General Operation
INFO/PIC
Monitor Brightness
CVBS Screen Controls
Press PIC momentarily to display DVD disc information.
Press and hold PIC for 2 seconds to change monitor BRIGHTNESS: Press to increase, to decrease, or turn the rotary to adjust the level up or down. (0 minimum/20 maximum) 10 is default.
While in Aux or Camera mode: Press and hold PIC for 2 seconds to access PICTURE MENU. Press PIC momentarily to step to next selection:
PICTURE MENU
SHARPNESS 10 COLOR 10 CONTRAST 10 BRIGHTNESS 10 TINT 10
Sharpness
Color
Contrast
Brightness
Tint
L
Press or to adjust the sharpness (0 minimum/+20 maximum).
Press or to adjust the color (0 minimum/+20 maximum).
Press or to adjust the contrast (0 minimum/+20 maximum).
Press or to adjust the brightness (0 minimum/+20 maximum).
Press or to adjust the tint (0 minimum/+20 maximum).
Note: Adjustments to Sharpness, Color, Contrast, Brightness, or Tint are only possible while in either Aux or Camera mode.
16
XDVD8281 OPERATION
General Operation - Main Menu
Main Menu Access
Touch Access Buttons
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
There are three methods to access the MAIN menu:
Press MENU button on the front panel.
• Press MENU button on the remote control.
• Touch the upper left corner of the touch screen.
1
10
9
8
2
3
4
L
7
6
Touch to access AM/FM TUNER mode. Touch to access CD/DVD mode, (CD/DVD must be inserted). Touch to access AUXILIARY A/V INPUT mode. Touch to RETURN to previous screen. Touch to enter STANDBY mode, touch screen again or any button to resume normal operation. Note: VOLUME level can be controlled in STANDBY mode. Touch to access CAMERA mode, if optional camera isn't connected then "No Video Signal" will be displayed. Touch to access SCREEN SETUP menu. Touch to access GENERAL SETUP menu. Touch to access CD/DVD SETUP menu, (CD/DVD must be inserted to function). Touch to access MAIN source menu.
5
Rapid Dial Rotary Encoder
17
The rotary encoder can also control touch screen functions from the main menu.
Select desired function rotating clockwise or counter-clockwise.
• Press to confirm/ENTER.
Loading...
+ 42 hidden pages