Dual XDVD256BT User Manual

Wiring Diagram - Inputs/Outputs

Tuner Operation

Language Operation

XDVD256BT

Multimedia DVD Receiver with Bluetooth
featuring a 6.2” digital TFT LCD

This Quick Start Guide gives you the basics to

start using your XDVD256BT. Please visit

www.dualav.com/support/manuals.php

to download a complete owner’s manual or call customer

service at 1-866-382-5476 (Monday-Friday, 9AM-5PM EST).

Control Locations

5

6

7

8

Select the Tuner icon from the Main Menu screen
or press MODE unit Tuner is selected.

In setup menu press one of language
icons to select the desired language.

1. Current Mode Indicator

2. Information Display

3. Tune Up

4. Preset

5.

AS/PS

6.

Stereo

7.

Local/DX

8.

Band

Bluetooth Operation

Bluetooth Microphone

The microphone is built-in to the receiver.

9. Tune Down

Pairing and Connecting

Before you can use a Bluetooth device, it must be paired and connected. The
Multi Media broadcasts the pairing signal constantly when no devices are

DVD Operations

currently connected. Complete the pairing sequence from your Bluetooth device.
The device name is "Dual Multimedia Receiver". The Bluetooth passcode "0000".
Once pairing is complete, most Bluetooth will connect automatically if the device

7.

Setup

1.

Repeat

2.

Track Down

3.

Play/Pause

4.

Track Up

5.

Random

6.

4

Audio

8.

9.

10.

11.

12.

Monitor On/Off
Audio Setting
Subtitle
Zoom
Screen Setup

is in range when the unit is powered-on.

Dialing a Number

Press to display keypad and dial a number.

Making and Ending a Call

Press to connect a call, and press to
end a call.

Transfering Audio

Press to transfer audio between the

3

2

1

CD Operations

head unit and mobile phone.
Streaming Audio

Press to play or pause the music.
Press to skip to the previous track.

Press to advance to the next track.

Installation

TAPTITE TRUSS HEAD 5X6MM
8PCS

TAPTITE BINDING HEAD 5X6MM
8PCS

UNIT

TRIM PLATE

TYPICAL FRONT-LOAD DIN MOUNTING METHOD

Copyright and Trademark Notes

This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited. DVD Logo is a trademark of DVD Format/
Logo Licensing Corporation registered in the U.S., Japan and other countries.
SD Logo is a trademark of SD-3C, LLC. iPod and iPhone are trademarks of Apple Inc., registered in the U.S.
and other countries. Dual Electronics Corporation is not affiliated with Apple, Inc. Other trademarks and
trade names are those of their respective owners.

9

10

1. microSD Card

2. Mic

3. Eject - Press to eject disc

4. Reset

5. Mode

6. Tune/Track Up

7. Power/Volume/Mute

8. Tune/Track Down

9. USB Slot

10. AUX Input

Remote Control

1. Power

2. Mode

3. Play/Pause

4. Mute

5. Title

6. Sub Title

7. Setup

8. Angle

9. Eject

10. Volume UP

11. Zoom

12. Select/Talk

13. Seek UP/Next Track

14. Volume Down

15. Audio

16. Goto/*

17. Loud/End call

18. Number keys

19. Root

20. OSD
(On Screen Display)

21. Local/Random

22. Seek Down/
Prevous Track

23. AS/PS/Repeat

24. Stereo

25. Stop

26. Enter

27. Band

Main Menu

In the Menu mode, press the desired icon
to enter the corresponding mode: Tuner, Disc,

USB, SD Card, BT Phone, BT Music, Aux In,
AV In, Setup.

1. Previous Menu

2. Repeat

3. Random

4. Setting

5. File List

6. Track Up

General Operation

Press the function icons to select in
setup menu.

1 2 3 4

27
26

25
24

23
22

21
20

19

5
6

7
8
9

10
11

12
13

14
15

7. Audio

8. Play/Pause

9. Eject

10. Track Down

11. Monitor On/Off

One-Year Limited Warranty

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and
workmanship for a period of one year from the date of the original purchase.
Dual Electronics Corp. agrees, at our option, during the warranty period, to repair any defect in material or workman­ship or to furnish an equal new, renewed or comparable product (whichever is deemed necessary) in exchange
without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent
replacement products are warranted for the balance of the original warranty period.
Who is covered? This warranty is extended to the original retail purchaser for products purchased from an authorized
Dual dealer and used in the U.S.A.
What is covered? This warranty covers all defects in material and workmanship in this product. The following are not
covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product
modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied
with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright
notices for the software can be found via www.dualav.com.

What to do?

1. Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any
custom controls may save you a service call.

2. If you require service during the warranty period, you must carefully pack the product (preferably in the original
package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an
authorized service center.

3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not
acceptable), and a daytime phone number with your shipment.

4. For more information and for the location of the nearest authorized service center please contact us by one of the
following methods:

• Call us toll-free at 1-866-382-5476

(Monday-Friday, 9:00 a.m. to 5:00 p.m. EST)

• E-mail us at [e-mail]
Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or
implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and
any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence,
actual or imputed. No person or representative is authorized to assume for the company any other liability in
connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential
damages.

Audio Operation

18

16

17

Press Sound Effect icon In setup menu to select
Preset, 7-band tone control, Surround, Fader and
Balance.

1. EQ Setting

2. Surround Setting

3. Fader/Balance

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

:
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

www.dualav.com

©2016 Dual Electronics Corp.

NSC0616-V01

Printed in China