D-Link DMC-300SC/B Product Data Sheet
DMC-615SC
DMC-1002
Management Module
Media Converters & Chassis
Media Converters with Individual Metal
Case Housing.
DMC-1000 Chassis
DMC-920
DMC-1530SC
DMC-1580SC
Chassis-based Media Converters
System Overview
The Chassis-based Media Converters include a number of
independent media converters and a chassis capable of housing up
to 16 media converters. You can start with single media
converters, each equipped with its own housing and AC power
adapter. When your requirements grow big, you can mount a chassis
in your equipment rack and install your media converters in the
chassis. The housing of each media converter can be easily
removed, and the media converter PC board can be slid into the
chassis.
Chassis & Power Supply
The chassis lets you install multiple media converters in an
equipment rack together with the network devices for which they
provide media conversion. This provides for space saving,
and the cabling will look neat. The chassis comes with its own
universal AC to DC power supply. For maximum power availability,
an optional redundant power supply is available for installation in
chassis.
Management Option
You can select to configure your chassis with or without
management functions. If you configure it with management, a
management module is available for installation in the
chassis. It lets you monitor in real-time the status of all media
converters and power supplies in the chassis, it also sends out
alarms to alert you of all anormal situations. Management follows
industry standards, including SNMP and http, allowing you to
monitor and manage from a third-party SNMP management
workstation or via a web browser.
Media Conversion Solutions
The following media conversion solutions are available:
- Fast Ethernet twisted-pair to Fast Ethernet 100BASE-FX
fiber (single-mode and multi-mode)
- Fast Ethernet 100BASE-FX fiber multi-mode to single-mode
- 1000BASE-T Gigabit twisted pair to 1000BASE-SX and
1000BASE-LX Gigabit fiber
For fiber cables, MT-RJ and SC types of connectors are supported.
Media Converters Stand-alone or Installed in Chassis
The media converters convert signals capable of transmission on
one type of cable to signals capable of transmission on another type
of cable. This allows you to connect longer distance fiber cables
between devices that are designed only for shorter distance cables,
such as the Cat. 5 twisted-pair cable.
All media converters in this system come with their own solid metal
case housing, LED status indicators and AC to DC power adapters.
They can be used as stand-alone converters, or installed in the
chassis. In case you install them in the chassis, you will remove
their metal cases and slide in their PC boards into the chassis slots.
The chassis's power supply will be used instead of the media
converters' own AC to DC power adapters. All media converters
are hot-swappable when used with the chassis.
Chassis Features
16 bays to house up to 16 media converters
Front panel LEDs for bay and fan power status
Standard 19-inch rack-mountable with, 2U height
Non-stop operation & minimal downtime
Allows hot-swapping of media converters
Hot swappable redundant power supplies
Cooling fans on back side (together with power supplies)
1 universal internal AC to DC power supply provided
SNMP and web-based management capabilities (optional)
Second AC to DC power supply for load-sharing purpose
(optional)
Media converter power isolation for electrical isolation
from each bay
Page 1
Media Converters & Chassis
DMC-1000 Chassis
LED indicators
- Power LED - Fan LED
Housing Dimensions
415 x 390 x 89 mm
AC input
- 100-240 VAC, 50/60Hz
- Internal universal power supply
Operation Temperature
0 - 40 C
Storage Temperature
-10 - 50 C
Operation Humidity
10% - 90%
Storage Humidity
5% - 90%
Emission (EMI)
- FCC class A
- VCCI class A
- CE Class A
DMC-1002 Management Module
This module provides SNMP-based and web-based
management of all media converter and power supply
modules installed in the DMC-1000 chassis. It features a 32bit, high performance RISC microprocessor executing a
real-time operating system. It provides a 10/100Mbps Fast
Ethernet port for network connection, allowing you to
configure and monitor the system through an SNMP
management station or from a PC running an Internet
browser. An RS-232 port is also provided to let you connect
to a console (PC) to set configuration.
The management module periodically polls all converters
and power supplies in the chassis to collect information
regarding status and configuration settings. It also receives
traps for events such as module hot-swaps and power
failures as soon as they occur, as well as warning traps,
upon which alarms may be sounded out to alert you.
Management Module Features
- SNMP and web-based standards
- 10/100Mbps Fast Ethernet port & RS-232 console port
- Real-time display of link, speed, duplex status of media
converters
- Menu-driven terminal program provided for managment
via console port or Telnet
- Built-in SNMP v.1 agent with MIB-II and enterprise MIBs
- Supported traps: cold start, warm start, authentication fail,
power fail, fan fail, module insertion, module pullout, port
link down and port link up
- Supports factory reset and remote software reboot
- Supports redundant backup of media converters
- Supports remote setting of configurations of Smart Media
Converter modules, like LLCF enable, LLR enable, port
enable, auto-negotiation enable
- Password protection against unauthorized access
- Configuration setting upload/download through TFTP and
the web
- Firmware upgrade through TFTP and the web
Page 2
Technical Specifications
Management Information & Functions Supported
Chassis
- Part Number
- Revision
- Description
- Chassis Reset
- Power status
Media Converter Modules
- Link Status
- Converter Type
- Slot Occupied
- Part Number
- Revision
Alarms
- Cold Start
- Warm Start
- Link Up
- Link Down
Media Converters & Chassis
- Authentication Failure
- Power Supply On/Off
- Power Supply Inserted
- Power Supply Removed
- Module Insertion
- Module Removal
- Module Unknown
- Module Failure
Active Control
- Link Loss Carry Forward
- Link Loss Return
- Module Name
- IP address
- Reset Module
- Redundant Backup
- Download software via tftp / http
- Subnet Mask
- Default Gateway
- Telnet to Console Commands
Protocols Supported
- IP
- UDP
- SNMP
- TCP
- TFTP
- ARP
- ICMP
- HTTP
Physical & Environmental
LED Indicators
- Power 1, 2
- Power Fail 1, 2
- Fan Fail 1, 2 - MGM
- Console
- Link/Activity
Dimensions
120 x 88 x 25 mm
DMC-1580SC Smart Media
Converter
Supports Single-mode Fiber Cable Distance
Up To 80 km
This converter provides intelligent functions like LLCF, LLR,
store-and-forward mechanism, back-pressure and 802.3x flow
control.
It converts 10/100BASE-TX Fast Ethernet twisted-pair signals to
100BASE-FX Fast Ethernet single-mode fiber signals. Maximum
fiber cable distance is 80 km. 1 RJ-45 twisted-pair port and 1
fiber port (SC connector) are provided.
Media Converter Features
One-channel media conversion between 10/100BASE-TX and
100BASE-FX
Supports single-mode fiber using SC connector
Auto-negotiation of speed and duplex mode on 100BASE-TX
port
Supports link pass through
Supports Auto MDI/MDIX on 100BASE-TX port
Sliding switch for configuring fixed half/full duplex modes
Sliding switch for setting to Forced mode or Auto-negotiation
Sliding switch for setting the speed
Sliding switch for setting the LLCF, LLR function
Store-and-forward mechanism
Back-pressure & IEEE 802.3x compliant flow control
Full wire-speed forwarding rate
Front panel status LEDs
Can be used as a stand-alone device or installed in a chassis
Hot-swappable when used with chassis
Manageable through Intelligent Chassis System
Technical Specifications
LED Indicators
- Power
- Speed (for twisted-pair port)
- Full Duplex/Collision (for twisted-pair and fiber ports)
- LINK/ACT (for twisted-pair and fiber ports)
- Fail (for twisted-pair and fiber ports)
Operation Temperature
0 - 40 C
Storage Temperature
-25 - 70 C
Operation Humidity
10% - 90%
Storage Humidity
5% - 90%
Emission (EMI)
- FCC Class B
- CE Mark Class B
- VCCI Class B
Page 3
Power Input
- 7.5V 1.5A
- Through external power adapter
Power Consumption
7.2 watts max.
Dimensions
120 x 88 x 25 mm
Weight
305 grams
Operation Temperature
oo
0 - 40 C
Storage Temperature
oo
-25 - 70 C
Humidity
10 - 90% non-condensing
Emission (EMI)
- FCC Class B
- VCCI Class B
- CE Class B
Loading...