Product Announcement
D MC-1580SC
Date: December 4, 2003
Product name: 10/100Basse-TX to 100Base-FX Smart Media Converter
Product Group & Type:
Media Converter
Revision: A1
Available:
Picture:
Why Sell This Product:
• Additional media converter supporting longer fiber cable distance (up to 80 km).
• Additional module for DMC-1000 chassis-based media converter.
• Complete solution for SI: this product is targeted at system integrators, for special
cases to meet special requirements.
Keyfeatures:
• One-channel media conversion between 10/100BASE-TX and 100BASE-FX
• Supports single-mode fiber using SC connector
• Auto-negotiation of speed and duplex mode on 100BASE-TX port
• Supports link pass through
• Supports Auto MDI/MDIX on 100BASE-TX port
• Sliding switch for configuring fixed half/full duplex modes
• Sliding switch for setting to Forced mode or Auto-negotiation
• Sliding switch for setting the speed
• Sliding switch for setting the LLCF, LLR function
• Store-and-forward mechanism
• Back-pressure & IEEE 802.3x compliant flow control
• Full wire-speed forwarding rate
• Front panel status LEDs
• Can be used as a stand-alone device or installed in a chassis
• Hot-swappable when used with chassis
• Manageable through Intelligent Chassis System
Technical Details:
LED Indicators
- Power
- Speed (for twisted-pair port)
- Full Duplex/Collision (for twisted-pair and fiber ports)
- LINK/ACT (for twisted-pair and fiber ports)
- Fail (for twisted-pair and fiber ports)
Power Input
- 7.5V 1.5A
- Through external power adapter
Power Consumption
7.2 watts max.
Dimensions
120 x 88 x 25 mm
Weight
305 grams
Operation Temperature
0 - 40 °C
Storage Temperature
-25 - 70 °C
Humidity
10 - 90% non-condensing
Emission (EMI)
Page 1 of 2