D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify
any person or organization of such revisions or changes.
Manual Revisions
HardwareRevisionDateDescription
A1v1.002020/09/14Initial release
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United
States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks
of their respective companies.
Apple®, Apple logo®, Safari®, iPhone®, and Macintosh® are trademarks of Apple Inc., registered in the U.S. and other
countries. App StoreSM is a service mark of Apple Inc.
Chrome™ browser, Google Play™ and Android™ are trademarks of Google Inc.
Internet Explorer®, Windows® and the Windows logo are trademarks of the Microsoft group of companies.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from
D-Link Corporation, Inc.
iD-Link DIR-1260 User Manual
ErP Power Usage
This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network
Standby mode within 1 minute of no packets being transmitted. It can also be turned o through a power switch to save energy when it is not
needed.
If any of the above items are missing or damaged, please contact your local reseller.
Note: Using a power supply with a dierent voltage rating than the one included with the router will cause damage and void the warranty for this product.
1D-Link DIR-1260 User Manual
Section 1 - Product Overview
Network Requirements
System Requirements
• An Ethernet-based cable, DSL or ber modem
• IEEE 802.11ac/n/g/b/a wireless clients
• 10/100/1000 Ethernet
Computer with the following:
• Windows®, Macintosh, or Linux-based operating system
• An installed Ethernet adapter
Web-based
Conguration Utility
Requirements
D-Link Wi-Fi App
Requirements
Browser Requirements:
• Internet Explorer 10 or higher
• Firefox 28 or higher
• Safari 6 or higher
• Chrome 28 or higher
®
Windows
installed. Visit www.java.com to download the latest version.
• iOS® or Android™ device (Please refer to the app's store page
to check whether your device is compatible.)
Users: Make sure you have the latest version of Java
2D-Link DIR-1260 User Manual
Section 1 - Product Overview
Features
Need super-fast Wi-Fi for your wire-free, all-streaming house? With a powerful dual-core processor, the AC1200 Wi-Fi Gigabit Router packs in
enough processing power to handle every networking task you throw at it. It’s a powerful, intelligent home router with integrated voice assistant
compatibility for Amazon Alexa and Google Assistant so you can control your network with voice commands.
Handle More with a High-Power Processor
With the DIR-1260, you’re not only enjoying buffer-free gaming and lightning fast surfing, you’re also enjoying features such as an optimizing
QoS, an automatic firmware update system that ensures the latest features, and compatibility with voice assistants. All this is possible with the
router’s 880 MHz dual-core high-power processor, 128 MB of flash memory and 128 MB of RAM.
Enhanced Quality of Service Features
The built-in Quality of Service (QoS) engine allows you to prioritize important trac to ensure that your favorite applications are receiving optimal
bandwidth.
Always Up-to-Date with the Latest Features
The DIR-1260 will automatically check daily for updates to make sure that the device always has the latest features, and will install the update
silently in the background. For an extra peace of mind, in the event of failure during the firmware update, the router will store a backup system
image in the memory before proceeding with the update.
Easy to Set Up and Manage
Sharing your Internet connection doesn’t have to be a complicated process; just download the free D-Link Wi-Fi app for your mobile device and
follow the on-screen step-by-step instructions to set up your DIR-1260. You also have the option to use a web browser to access the setup wizard
and to manage your router. Support for industry-standard Wi-Fi Protected Setup (WPS) lets you create encrypted connections to new devices by
pressing a button.
3D-Link DIR-1260 User Manual
Section 1 - Product Overview
Hardware Overview
LED Indicators
1Power
2Internet
3Wireless (2.4 GHz)
4Wireless (5 GHz)
1
Solid WhiteThe device is on and the system is healthy.
Solid OrangeThe device is booting up or performing the factory reset process.
Blinking OrangeThe device is under recovery mode.
Solid WhiteThe Internet port connection is established.
Solid OrangeThe device cannot connect to the Internet.
Blinking OrangeThe device is undergoing the rmware upgrade process.
Solid WhiteThe 2.4 GHz wireless band is enabled.
Blinking WhiteThe device is processing WPS.
Solid WhiteThe 5 GHz wireless band is enabled.
Blinking WhiteThe device is processing WPS.
2
3
4
4D-Link DIR-1260 User Manual
Section 1 - Product Overview
Back Panel
2145
1WPS Button
2Reset Button
3
4Gigabit WAN PortUsing an Ethernet cable, connect your broadband modem to this port.
5Power ConnectorConnector for the supplied power adapter.
6Power ButtonPress the power button to power the device on or o.
Gigabit LAN Ports
(1- 4)
Press to start the WPS process and automatically create an encrypted connection to a WPS
client.
Insert a paperclip in the hole, wait for 10 seconds, and release to reset the router to default
settings.
Connect Ethernet devices such as computers, switches, storage (NAS) devices, and game
consoles.
3
6
5D-Link DIR-1260 User Manual
Section 2 - Installation
Installation
This section will walk you through the installation of your DIR-1260.
Before you Begin
• Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, attic, or
garage.
• Congure the router with the computer that was last connected directly to your Internet connection. Verify that it is
connected to the Internet before connecting additional devices.
• You can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then
you must turn o your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the
router, and then turn the modem back on. In some cases, you may need to call your Internet Service Provider (ISP) to
change connection types (USB to Ethernet).
• If connecting to a DSL modem, make sure to have your DSL service information provided by your Internet Service
Provider handy. This information is likely to include your DSL account's Username and Password. Your ISP may also supply
you with additional WAN conguration settings which might be necessary to establish a connection.
• If you are connecting a considerable amount of networking equipment, it may be a good idea to take the time to label
each cable or take a picture of your existing setup before making any changes.
• If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoET,
BroadJump, or EnterNet 300 from your computer or you will not be able to connect to the Internet.
6D-Link DIR-1260 User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the
operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other
objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of
materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to
follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or
ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or
ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters), at a 45-degree angle
appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick. Position devices so
that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
3. Building materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try
to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways.
Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and
concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.
5. If you are using 2.4 GHz cordless phones, your wireless connection may degrade dramatically or drop completely. Make
sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the
phone is not in use.
7D-Link DIR-1260 User Manual
Section 2 - Installation
Setup
There are several dierent ways you can congure your router to connect to the Internet
• D-Link Wi-Fi App - Use your compatible Android or iOS device to install and congure your router. Refer to D-Link Wi-Fi
App Setup on page 9.
• Hardware Setup - This section explains how to setup your DIR-1260. Refer to Hardware Setup on page 11.
• D-Link Setup Wizard - This wizard will launch when you log into the router by using your PC for the rst time. Refer to
Setup Wizard on page 14.
• Manual Setup - Log in to the router to manually congure your router. Refer to Conguration on page 21.
8D-Link DIR-1260 User Manual
Section 2 - Installation
D-Link Wi-Fi App Setup
The D-Link Wi-Fi app allows you to install and congure your DIR-1260 from your compatible Android or iOS device.
Note: The screenshots may be dierent depending on your mobile device’s OS version. The following steps show the iOS interface
of the D-Link Wi-Fi app. If you are using an Android device, the appearance may be dierent from that of the screenshots, but the
process is the same.
Step 1
Search and install the free D-Link Wi-Fi app available on the App Store or on
Google Play. You can also scan the QR code on the right, which will take you
to the respective D-Link Wi-Fi app store page.
Step 2
Launch the D-Link Wi-Fi app from the home screen of your device.
Step 3
Tap on the Install New Device button at the middle of the screen.
D-Link Wi-Fi
9D-Link DIR-1260 User Manual
Section 2 - Installation
Step 4
Tap Scan the QR code to scan the setup QR code located in the Quick
Installation Card and proceed to step 6. Alternatively, you can tap Continue
without scanning to proceed to step 5.
Step 5
Select Router and select DIR-1260 from the list of available devices. Tap
Next to continue.
Step 6
You will now be guided through a step-by-step process for setting up your
router. Simply follow the on-screen instructions to continue the installation
and the conguration process.
10D-Link DIR-1260 User Manual
Section 2 - Installation
4 3 2 1
LAN
INTERNET
12V
DC IN
WPS
POWER
RESET
- • +
4 3 2 1
LAN
INTERNET
12V
DC IN
WPS
POWER
RESET
- • +
4 3 2 1
LAN
INTERNET
12V
DC IN
WPS
POWER
RESET
- • +
Hardware Setup
Step 1
Position your DIR-1260 near your Internet-connected modem. Place it in an
open area for better wireless coverage.
Step 2
Turn o and unplug the power to your cable or DSL broadband modem. This
is required. In some cases, you may need to turn it o for up to ve minutes.
ModemModem
Step 3
Use the Ethernet cable to connect your modem to the port labelled
INTERNET on the router.
Modem
11D-Link DIR-1260 User Manual
Section 2 - Installation
4 3 2 1
LAN
INTERNET
12V
DCIN
WPS
POWER
RESET
- • +
4 3 2 1
LAN
INTERNET
12V
DC IN
WPS
POWER
RESET
- • +
4 3 2 1
LAN
INTERNET
12V
DCIN
WPS
POWER
RESET
- • +
Step 4
Plug in and turn your modem back on and wait approximately one minute
before proceeding.
Step 5
Connect the supplied power adapter to the router and a power outlet,
press the power button, and wait approximately one minute until the LED
indicator on the front of the device changes from orange to solid white.
ModemModem
Step 6
If you are conguring the router wirelessly from a PC, connect to the Wi-Fi network printed on the label attached to the
bottom of your router or in the Quick Installation Card.
SSID:
Password:
Modem
12D-Link DIR-1260 User Manual
Section 2 - Installation
4 3 2 1
LAN
INTERNET
12V
DCIN
WPS
POWER
RESET
- • +
If you are conguring the router from a PC with a wired Ethernet connection, plug one end of an Ethernet cable into the
port labeled 1 on the back of the router, and the other end into the Ethernet port on your computer.
Modem
Step 7
If you are connecting to a broadband service that uses a dynamic connection (not PPPoE), you may be online already. Try
opening a web browser and connecting to a website. If the website does not load, proceed to Setup Wizard on page 14.
13D-Link DIR-1260 User Manual
Section 2 - Installation
Setup Wizard
The setup wizard is designed to guide you through a step-by-step process to congure your new DIR-1260 and connect to the
Internet via a wireless setup process.
If this is your rst time installing the router, open your web browser and
enter http://dlinkrouter.local./ in the address bar. Alternatively, enter the IP
address of the router (default: http://192.168.0.1).
If this is your rst time logging in to the page and no connection has been
established, then log in with the password shown on the device label or Quick
Install Guide.
Agree to the Terms of Use and Privacy Policy before proceeding.
14D-Link DIR-1260 User Manual
Section 2 - Installation
Follow the on-screen instructions to congure your new D-Link router and
connect to the Internet.
Click Next to continue.
Please wait while your router detects your Internet connection type.
15D-Link DIR-1260 User Manual
Section 2 - Installation
If the router does not detect a valid Internet connection, a list of connection
types to choose from will be displayed. Select your Internet connection type
(this information can be obtained from your Internet Service Provider).
Click Next to continue.
If the router detected or you selected PPPoE, enter your PPPoE username and
password. If you do not have this information, please contact your ISP.
Click Next to continue.
Note: Make sure to remove all other existing PPPoE software from your computer.
The software is no longer needed and will not work through a router.
16D-Link DIR-1260 User Manual
Section 2 - Installation
If the router detected or you selected Static, enter the IP and DNS settings
supplied by your ISP. If you do not have this information, please contact your ISP.
Click Next to continue.
Type in a Wi-Fi Network Name and Wi-Fi Password to setup your Wi-Fi
network. Your wireless clients will need to have this passphrase to be able to
connect to your wireless network.
Click Next to continue.
Note: The router's Smart Connect feature presents a single wireless network. When
connecting clients to an extension network, they will be automatically added to
the best band, either 2.4 GHz or 5 GHz. To disable the Smart Connect feature and
individually congure 2.4 GHz and 5 GHz networks, refer to Wireless (Wi-Fi) on
page 56.
17D-Link DIR-1260 User Manual
Section 2 - Installation
In order to better protect the router's configuration access, please enter
a password. You will be prompted for this password every time you want to
use the router’s web configuration utility.
Click Next to continue.
Select your time zone from the drop-down menu.
Click Next to continue.
18D-Link DIR-1260 User Manual
Section 2 - Installation
Keeping your router's firmware up-to-date provides you with the
latest features over the air. Choose whether to keep your device up-to-date
automatically or to manage the device updates by yourself.
Click Next to continue.
You will be presented with a summary of your settings.
Click Next to nalize the settings or Back to make changes.
19D-Link DIR-1260 User Manual
Section 2 - Installation
Please wait while the device settings are saved.
Do not turn o or unplug your router during this time.
Your new settings have been saved and your router is now congured.
Click OK to close the Setup Wizard.
Congratulations, your device has been successfully congured!
You can log in to the conguration utility by inputting the Admin Password.
20D-Link DIR-1260 User Manual
Section 3 - Conguration
Conguration
To access the conguration utility, open your web-browser and enter http://
dlinkrouter.local./ or you may also connect by typing the IP address of the
router (by default this is http://192.168.0.1) in the address bar.
Enter your password. If you previously followed the setup wizard, please use
the admin password you entered during the wizard. Otherwise, log in with
the password shown on the device label or Quick Install Guide.. Click Log In
to proceed.
Note: If you cannot remember your password and cannot log in, use a paperclip
to press the recessed Reset button on the back of the device for longer than 10
seconds to restore the router to its default settings.
The router’s home page will open displaying its current connection status.
The bar at the top of the page has quick access to Settings, Features and
Management functions. You can quickly jump back Home at any time.
Note: The system will automatically log out after a period of inactivity.
21D-Link DIR-1260 User Manual
Section 3 - Conguration
Home
The Home page displays the current status of the router in the form of an interactive diagram. You can click each icon to
display information about each part of the network at the bottom of the screen. The menu bar at the top of the page will
allow you to quickly navigate to other pages.
The Home page displays whether or not the router is currently connected to
the Internet.
Click Pause Internet Access to pause Internet access.
If it is disconnected, click Click to repair to bring up the setup wizard, refer
to the Setup Wizard on page 14 for more information.
22D-Link DIR-1260 User Manual
Section 3 - Conguration
If it is paused, click Resume Internet Access to resume Internet access.
23D-Link DIR-1260 User Manual
Section 3 - Conguration
Internet
To bring up more details about your Internet connection, click on the Internet icon.
Click IPv4 or IPv6 to see details of the IPv4 connection and IPv6 connection
respectively.
Click Release IP Address to disconnect from the Internet. If you do this and
wish to reconnect, click Renew.
To recongure the Internet settings, refer to Internet (WAN) - IPv4 on page
29.
24D-Link DIR-1260 User Manual
Section 3 - Conguration
DIR-1260
Click on the DIR-1260 icon to view details about the router and its wireless settings.
Here you can see the router’s current Wi-Fi network name and password, as
well as the router's MAC address, IPv4 address, and IPv6 address.
To recongure the network settings, either click Go to settings on the
lower left, or click Settings (at the top of the page) and then Network on
the menu that appears. Refer to Network(LAN) on page 62 for more
information.
To recongure the wireless settings, either click Go to settings, on the
lower right, or click Settings (at the top of the page) and then Wireless on
the menu that appears. Refer to Wireless (Wi-Fi) on page 56 for more
information.
25D-Link DIR-1260 User Manual
Loading...
+ 122 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.