PRACTICAL USER’S GUIDE
FOR THE
OPTIFLAME ELECTRIC FIREPLACE
Quality checked by:
Write Your Remote
Control Code Number Here:
Valued Customer,
We are pleased that you have chosen to purchase an electric fireplace manufactured by Dimplex North America Ltd.
Over the years, valuable memories will occur around the warmth and comfort of your hearth. Thank you for allowing our product to be the backdrop for those special moments.
7205860100REV03
QUICK REFERENCE GUIDE
FOR THE OPTIFLAME ELECTRIC FIREPLACE
NOTE: ALWAYS USE A CERTIFIED ELECTRICIAN TO MAKE ALL ELECTRICAL CONNECTIONS DURING INSTALLATION
1.Prior to the first use of the fireplace verify the following:
•Are the circuit breakers for the fireplace on?
•Are the light bulbs in your fireplace loose? (to check, follow the instructions for replacing the light bulbs under the maintenance section of this manual)
2.The heater on your fireplace may emit a slight, harmless odor when first used. This odor is a normal condition caused by the initial heating of internal heater parts and will not occur again.
3.If your heater does not emit heat, ensure the front switch is on, that the two red indicator lights are on for low heat (three indicator lights for high heat). If this does not work, switch the unit off for 5 minutes and try again. Consult operation section of your practical users guide for further information.
4.The information regarding the model of your fireplace can be found on the rating plate located under the logs in the lighting area.
5.If you have any technical questions, questions regarding the operation of your fireplace, or require service for your fireplace contact Dimplex North America customer service at 1-888- DIMPLEX (1-888-346-7539).
CONTENTS
PAGE 1 IMPORTANT INSTRUCTIONS
PAGE 3 OPERATION
PAGE 5 MAINTENANCE
PAGE 6 WARRANTY AND ACCESSORIES
IMPORTANT INSTRUCTIONS
PLEASE RETAIN THIS USER’S GUIDE FOR FUTURE REFERENCE
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1.Always use a certified electrician for installation
2.Read all instructions before using this fireplace.
3.This fireplace is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. The trim around the heater outlet becomes hot during heater operation. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the unit.
4.Extreme caution is necessary when any heater is used by or near children or invalids and whenever the fireplace is left operating and unattended.
5.Do not operate any fireplace if the heater has malfunctioned, or if the fireplace has been dropped or damaged in any manner.
6.Do not use outdoors
7.Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage to the heater.
8.To prevent a possible fire, do not block are intake or exhaust in any manner.
9.All electrical heaters have hot and arcing or sparking parts inside. Do not use in areas where gasoline, paint, or flammable liquids are used or stored or where the unit will be exposed to flammable vapors.
10.Do not modify this fireplace. Use it only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.
11.Do not burn wood or other materials in this fireplace.
12.Do not strike fireplace glass.
13.Disconnect all power coming to fireplace at main service panel before performing any cleaning, or maintenance.
14.When transporting or storing the fireplace, keep in a dry place, free from excessive vibration and store as to avoid damage.
NOTE: Procedures and techniques that are considered important enough to emphasize.
CAUTION: Procedures and techniques, which, if not carefully followed, will result in damage to the equipment.
WARNING: Procedures and techniques, which, if not carefully followed, will expose he user to the risk of fire, serious injury, illness or death.
1
Loading...