Desa 34310 User Manual

ELECTRIC STAPLE GUN

Model 34310



OPERATING

INSTRUCTIONS

Safety Information

!

WARNING: Follow all safety precautions outlined in these operat-

ing instructions. Improper use of this tool can cause severe injury or
death from fire, electrical shock, or firing staple into body.

Before Operating Tool

1. Read and understand these operating instructions before operating tool.

2. Only well-instructed adults should operate tool. Never allow children to
operate tool.

3. Do not operate tool

•where highly flammable liquids or gases are present

•while under the influence of alcohol, medication, or drugs

•if exposed to rain or in damp or wet areas

•while tired or in a hurry

•if tool is damaged

•if trigger does not turn tool on and off. Have faulty switch replaced

by factory service center.

4. To reduce the risk of electric shock, this tool has a polarized plug (one blade
is wider than the other). This plug will fit in a polarized outlet only one way.
If the plug will not fit fully in the outlet, reverse the plug. If it still will not fit,
contact a qualified electrician to install the proper outlet. Do not change the
plug in any way.

5. Use only extension cords marked for outdoor use.

6. Never use this tool

•where heavy-duty tool is needed

•where not intended - for example - don’t use tool on concrete, metal, or

glass

7. Wear snug-fitting clothing when operating tool. Do not wear loose clothing
or jewelry. They can get caught in moving parts

8. Wear the following safety gear when operating tool:

•rubber gloves (outdoors)

•footwear with non-skid soles (outdoors)

•eye protection such as safety glasses or goggles

•hair covering to contain long hair

9. Keep work area well lit.

10. Move trigger lock to the OFF position and unplug tool

•when loading tool

•when not in use

•when moving from one place to another

•before maintenance

•when changing accessories

11. Do not alter this tool in any way. Only use accessories designed for this tool.

During Operation of Tool

1. Keep all parts of body away from staple exit on tool.

2. Never point tool at anyone.

3. Keep children, animals, and bystanders away from tool and extension cord
at all times. Only tool user should be in work area.

4. Stay alert. Use common sense while operating tool.

5. Keep trigger lock in the OFF position and finger off trigger until ready to drive
staple.

6. Keep work area clean. Cluttered work areas invite injuries.

7. Secure work before using tool. Use both hands to operate tool.

8. Do not touch any metal part of tool when stapling into areas where electrical
wiring may be present. These areas include walls, floors, and ceilings. If
staple contacts electrical wire, electric shock may occur.

9. Avoid body contact with grounded objects such as pipes, fences, and metal
posts.

10. Do not force tool. Use tool at rate for which it was designed.

11. Do not overreach. Keep proper footing and balance at all times.

12. Carry tool from one place to another

•with tool unplugged

•with trigger lock in the OFF position

•with finger off the trigger

General

1. Inspect tool before and after each use. Check tool closely if it has been
damaged. Check for any damage that may affect operation of tool. Check
for alignment or binding of moving parts. Check for broken or damaged
parts. Do not use tool if damage affects operation. Have damage repaired
by factory service center.

2. When servicing, use only identical replacement parts.

3. Maintain tool with care.

•Never fire tool when empty of staples. This may damage tool.

•Keep tool clean.

•Keep handles dry, clean, and free of oil and grease.

•Inspect power cord often. If damaged, have repaired by factory service

center.

•Never carry tool by power cord.

•Never yank power cord to unplug it.

•Keep power cord away from heat, oil, and sharp edges.

•Inspect extension cords often and replace if damaged.

•Never oil or grease any part of tool.

4. Always store tool

•with staples removed from chamber

•out of children’s reach

•in a high or locked place that is dry

Keep these operating instructions for reference. It is your guide to safe and
proper operation of this tool.

Product Identification

Head

Staple Exit

On/Off Trigger
Lock

Trigger

Staple Chamber
Cover (underneath)

Hand Grip

Power
Cord

Product Features

The PowerFast Electric Staple Gun is a multi-purpose tool. This tool is designed
for home and workshop. It performs basic fastening jobs from installing
insulation, porch screening, and ceiling tiles to repairing upholstery.

Trigger This tool has an easy squeeze trigger. The trigger is located under­neath the hand grip. Each squeeze of the trigger fires one staple. Make sure
your finger is not on the trigger when connecting or loading the tool.

ON/OFF Trigger Lock This tool is equipped with a sliding ON/OFF trigger lock.
The trigger lock is located at the front of the hand grip, just above the trigger.
This safety feature helps prevent accidental firing. Make sure the trigger lock
reads OFF when plugging in or loading the tool. Also, make sure the trigger lock
reads OFF when tool is not in use. To release, slide the trigger lock to read ON.

Extension Cords

!

CAUTION: Use only extension cords marked for outdoor use.

Be sure to use the right size extension cord. If cord size is wrong, tool may be
damaged. Tool performance may also be affected.

Extension Cord Size Requirement

1 to 25 feet, use 16 AWG rated cord
26 to 50 feet, use 14 AWG rated cord

Inspect extension cord often. Replace cord if worn or damaged.

Loading Tool

!

WARNING: Never load tool while it is plugged in. Accidental

discharge may occur. Before loading, move trigger lock to the OFF
position and unplug tool.

1. Move trigger lock to the OFF
position (see Figure 1) and
unplug tool.

2. Turn tool upside down.

3. Press in latch lock and slide
staple chamber cover back
until fully open (see Figures 2
and 3).

Latch
Lock

Figure 2 Figure 3

Trigger Lock In
Off Position

Figure 1

Staple
Chamber
Cover

Continued