100 Corporate Drive Mahwah, NJ 07430
Service Bulletin
No. : OST-F1062b
Date:
June 4, 2007
_____________________________________________________________
Model: DVD-2910, DVD-955, DVD-3910, DVD-5910, DVD-5910CI
Subject: Countermeasure for malfunctions that occur when operations are
performed during playback of particular CD/DVD/SACD Video Discs.
Symptom: Regarding CD/DVD/SACD media in the market, rarely, there are
discs whose centroid (center of gravity) is one-sided greatly, and there is a case
that the unit generates mechanical or vibration noise when reproducing these
particular discs. We will reduce the rotation speed of the disc as follows to
suppress the noise:
Solution:
MODIFICATION: (Upon refurbishment of the unit and/or claim) Please record the
file on a blank CD-R separately and individually, and update the firmware in the
Back-end on your customer's unit upon refurbishment of the unit and/or claim.
Caution:
• When recording the file(s) on a blank CD-R, the format shall be "ISO9660" and
the session shall be "CLOSE".
• When recording the program file on the CD-R, please record it at the 4-times
speed of the normal speed.
• When the 4-times speed is not available, please record it at the minimum speed
that is available in your machine.
______________________________________________________________________________________
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.
CONFIDENTIALITY NOTICE:
• If the file was recorded at a high speed, such as 32 or 48 times speed of the
normal speed, the upgrading may fail due to the data incorrectly recorded on the
CD-R.
Supplied Program files:
1) For the DVD-2910 and DVD-955:
• Name of the File: d21zsavd.cfw • Version: GEN8281/MAKE DAY 506
2) For the DVD-3910 equipped with the 2nd or 3rd Edition of DENON Link
(a) DVD-3910 equipped with the 2nd Edition of DENON Link:
• Name of the File: d31zsavd.cfw • Version: GEN8280/MAKE DAY 506
(b) DVD-3910 equipped with the 3rd Edition of DENON Link:
• Name of the File: d31zsavd.cfw • Version: GEN8280/MAKE DAY 506D
3) For the DVD-5910 equipped with the 2nd or 3rd Edition of DENON Link
(a) DVD-5910 equipped with the 2nd Edition of DENON Link:
• Name of the File: d51zsavd.cfw • Version: GEN8278/MAKE DAY 506
(b) DVD-5910 equipped with the 3rd Edition of DENON Link:
• Name of the File: d51zsavd.cfw • Version: GEN8278/MAKE DAY 506D
4) For the DVD-5910CI equipped with the 3rd Edition of DENON Link:
• Name of the File: d51zsavd.cfw • Version: GEN8279/MAKE DAY 506D
Cautions:
In the case of model DVD-3910/5910, the contents of the program files differ
though their names are the same. Therefore, please do not apply the program
file for the 3rd Edition DENON Link to the unit that is equipped with the 2nd
Edition, and the program file for the 2nd Edition of DENON Link to the unit
equipped with the 3rd Edition. If you rewrote the unit by mistakes, rewrite the
unit again by means of the correct program file.
• How to identify the unit to which the 2nd or 3rd Edition of DENON Link has
been applied:
Please confirm the version of the DENON Link at the SETUP of the unit
according to the following procedures.
1) Switch the Power of the unit on, and press the "SETUP" button so that the
SETUP OSD is displayed.
2) Adjust the cursor to the item of DENON Link in the DIGITAL INTERFACE
SETUP.
3) If the items of the DENON Link are "OFF" and "2nd" only, the unit is
conforming to the 2nd Edition of the DENON Link. If the items are "OFF", "2nd"
and "3rd", then the unit is conforming to the 3rd Edition.
______________________________________________________________________________________
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.
CONFIDENTIALITY NOTICE:
Update Procedures:
SYSTEM MICON
1) Updating the System MICON on the DVD-3910 (DVD-3910 only):
(a.) Connect the Video Output Terminal (VIDEO OUT or S-VIDEO OUT) of the
unit to a TV.
(b.) Switch the Power of the unit on. Press the "OPEN/CLOSE" button and open
the Disc Tray.
(c.) Put the CD-R (Ver.6767-5) for rewriting the System MICON on the Disc Tray
and press the "OPEN/CLOSE" button.
• The Disc Tray closes and the update of the software is performed automatically.
• After indicating "LOADING" on the FL Display, the Power of the unit is turned
off once, and is turned on again.
• After "WRITING" is indicated on the FL Display, "COMPLETE" is indicated.
(d.) After the indication of the "COMPLETE", the Disc Tray opens automatically
upon completion of the rewriting operation. Take out the Disc from the Disc
Tray.
(e.) Turn the Power switch of the unit off once.
2) Updating the System MICON on the DVD-5910 (DVD-5910 only):
(a.) Connect the Video Output Terminal (VIDEO OUT or S-VIDEO OUT) of the
unit to a TV.
(b.) Switch the Power of the unit on. Press the "OPEN/CLOSE" button and open
the Disc Tray.
(c.) Put the CD-R (Ver.6867-2) for rewriting the System MICON on the Disc Tray
and press the "OPEN/CLOSE" button.
• The Disc Tray closes and the update of the software is performed automatically.
• After indicating "LOADING" on the FL Display, the Power of the unit is turned
off once, and is turned on again.
• After "WRITING" is indicated on the FL Display, "COMPLETE" is indicated.
(d.) After the indication of the "COMPLETE", the Disc Tray opens automatically
upon completion of the rewriting operation. Take out the Disc from the Disc
Tray.
(e.) Turn the Power switch of the unit off once.
IEEE 1394 ROM
3) Updating the IEEE1394 ROM, (DVD-3910 only):
(a.) Connect the Video Output Terminal (VIDEO OUT or S-VIDEO OUT) of the
unit to a TV.
(b.) Turn on the Power switch of the unit. Press the "OPEN/CLOSE" button and
open the Disc Tray.
(c.) Set the CD-R (Ver.ER1028 [20041028]) for rewriting the IEEE1394 to the
Disc Tray, and press "OPEN/CLOSE" button.
______________________________________________________________________________________
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.
CONFIDENTIALITY NOTICE: