Denon DRA-775RD Service Manual
Specifications and Main Features
- Model: DRA-775RD
- Type: AM-FM Hi-FI Stereo Receiver
- Power: AC 120V, 60Hz
- Power Consumption: Around 90W
- AM Band: 530 - 1710 kHz
- FM Band: 87.5 - 108 MHz
- Total Harmonic Distortion (THD): 0.3%(1kHz, 8 Ohm)
- Signal to Noise Ratio: Roughly 100 dB A-weighted)
- Effective Output Power: 100W Channels (8 Ohm)
- Inputs/Ports:
- 4 x Line Inputs
- 1 x Phono Input
- 1 x Tape I/O
- 1 x CD
- 1 x Video
- 1 x Multi-Source
- Outputs/Ports:
- 2 x Speakers A/B
- Headphones
- Physical Size: 17.0 W x 5.0 H x 15.0 D
- Weight: About 18.6 lbs (8.4 kg)
- Other:
- Support RDS/RBDS and Decoder function
- Has a built-in Digital Tuner
- Comes with a remote control
- Has tone control function (Bass, Treble)
- Loudness control report
- Mute function
- Headphones amplifier unit
- A/B speaker selector unit
- Volume control with numeric display
Frequently Asked Questions
Q1 : What are the power requirements for DRA-775RD receiver device?
A1: The device's Nez dark needs to be supplied with an AC power of 120 volts and a frequency of 60 hertz
Q2: Can you list out the inputs of the DRA-775RD receiver for me?
A2: This multi-source receiver has up to four line paralel inputs alongside a single tape input and output, a phono input, a video input, as well as a single CD input.
Q3: Are there any headphone jacks in the receiver?
A3: The receiver, DRA-775RD, indeed has it, Operating with output headphones is supported.
Q4: What is the power output of the receiver in question?
A4: In loading of eight ohms speakers, the output power level is capable to deliver professor one hundred watts for each channel.
Q5: Would you say the DRA-775RD has support for RDS/RBDS?
A5: Sure, this model has an embedded RDS/RBDS which works as a decoder.
Q6: How much would you say the Total Harmonic Distortion of the amplifier sit at?
A6: THD stands for total harmonic distortion can be rated at 3 percent on 1 kHz rms power for 8 ohms speaker.
Q7: Would the DRA-775RD allow the attachment of two speakers with it?
A7: Yes, the receiver connects to the terminals of two independent A and B speaker outputs.
Q8: How large is the receiver?
A8: The DRA-775RD has a size of 17.0 inches by 15.0 inches by 5.0 inches.
Q9: How Do I Use the Remote Control?
A9: Using the DRA-775RD, the user can control the unit without having to touch it directly.
Q10: in your description above, I note that the DRA-775RD receiver weighs around 18.6 lbs. Please validate if that's true or otherwise advise.
A10: The receiver weighs around 18.6 lbs (8.4 kg).
User Manual
Loading...