Denon AVC-A11XVA Service Bulletin

The Operating Manual for DENON AV Receiver/Amplifier firmware upgrade Page 1 / 1

Confirming the firmware’s number after upgraded:

After completion of the updating operation, the new version number can be confirmed

by starting up the AVR-4806CI / AVC-A11XVA according to the following procedure.

With the following operation, the AVR-4806CI / AVC-A11XVA can be set to the

Flash-ROM Version-Number Confirmation Mode.

Turn the power of the AVR-4806CI / AVC-A11XVA on, while holding both “ROOM EQ”

button and “STATUS” button on the front panel simultaneously.

ROOM EQ

＋

STATUS

＋

Power ON

Turn

Every time the “STATUS” Button is pressed, version numbers of the MAIN, SUB,

etc. are indicated on the front panel section in the following order.

Depression Button Name Remarks
1 STATUS MODEL AVR or AVC
2 STATUS MAIN 03.24
3 STATUS SUB 02.04
4 STATUS VIDEO 03.25
5 STATUS DSP1 28.05
6 STATUS DSP2 29.04
7 STATUS DSP3 30.07
8 STATUS 1394 IMG I00000EF50051
9 STATUS 1394 BL B0000280B0001
10 STATUS 1394 CNE C 20050211
11 STATUS ETHERNET IMG I200612111009 (AVR)

or
I200612111015 (AVC)

12 STATUS ETHERNET BL B200601241241

or
B200508021355 (*1 )

13 STATUS ETHERNET CNE C 20061211

14 STATUS ETHERNET MAC 0005cd-*****

(*1) : Version of the product that executed the network upgrade at first.