Specifications and Main Features
- Partial Specification: AVC-3020/AVC-2020/AVC-2020G
- Power Amplifier Output: 80 W 20Hz to 20kHz for 8 ohms 0.08% T.H.D.
- For Main Amplifier Output: 100 W 6 ohms EIAJ.
- For Center Amplifier Output: 35W + 35W for AVC 3020 at 8ohms 0.4% T.H.D and For AVC 2020/2020G at 6 ohms 50W + 50 W.
- Rear Amplifier Output: 35W + 35W for 8ohms and 2.0% T.H.D for 3020 and at 6ohm 50W + 50W for 2020/2020G.
- Main Speaker Amplifier Output for AVC-3020: 2040W 8 ohm EIAJ.
- AVC-2020:40W 6 ohm To 50 K.
- AVC-20220G: 35W+35W for 8ohm and 50W +50 W for 6 ohm 6 EIAJ.
- Frequency response of on the components (in and Out): 5Hz to 50 KHz (On Center Amplifier Output).
- Voltage/Decrement In: 1V +/- 0.2V and 10 K ohms (Speaker or headphones circuits which are power).
- Ration of Saddle and Noise infraction: Several dB( Measurements are but in metaphoric sense).
- Output Terminals (other than ‘A’ and ‘B’): both A and B F sockets are meant for main.
- Input circuit ohm or ohms Phono: 150 and 30 mV.
- In other parts of Post Midi format for bear locks or complexes with midi buses power is from 110240 Volts running frequencies cycles of either or both 50 or 60.
- Power Consumption: Multi-voltage Model uses 250 W; Models for the USA and Canada draw 6.0 A
- Dimensions:
- For AVC-3020/2020: 434(W)x160(H)x427(D) mm
- For AVC-2020G: 470(W)x160(H)x427(D) mm
- Weight:
- For AVC-3020/2020: 15 kg (33 lbs 2 oz)
- For AVC-2020G: 16.2 kg (35 lbs 2 oz)
- Remote Control Unit Model: RC-134
- Remote Control System: Total of 60 buttons and has learning capabilities.
Frequently Asked Questions
Q1: What is the maximum output power of the AVC-3020?
A1: When 6 Ohm Speakers are utilized, the AV320 offers a total of 100 W per channel or 100 watts of output power.
Q2: Is it possible to connect other types of speakers with AVC-3020?
A2: It is possible to connect speakers that have an impedance rating of between 6 to 16 Ohms to AVC-3020.
Q3: What is the AVC-3020’s audio section frequency response?
A3: Commencing from 5 Hz up till 50 kHz of frequency for the main speaker output would be acceptable.
Q4: What is the procedure to select a particular video input from the AVC-3020?
A4: The video input can be selected either with the remote control function or by pushing the FUNCTION switch on the control panel.
Q5: Are there any protective mechanisms in the AVC-3020?
A5: Yes, the AVC-3020 has a built-in protective circuit that prevents damage under certain conditions.
User Manual
Loading...