Specifications and Main Features
- AVG 2000 is product model
- Acceptable Input is AC 110/120/220/240V ~ 50/60Hz
- Maximum Power Usage is100W
- Product New technology Integrated is Doly Prologic
- Speaker Connection Range reaches upto 7 speakers, 2 front, 1 center, 1 rear and 2 surround speakers
- Multiple Video Input/Output options such as VCR, VDP connections etc
- Comes with Remote Control, Model: RC-120
- Multiple Audio Input Peripheral support which includes PHONO, CD, Tuner, AUX, DAT/TAPE.
- The voltage selector provides adjustable selectors fixed to different voltage versions
- The surrounds modes include Hall, Stadium, Normal, Phantom, Bypass
- Equipment is protected with High Speed protector which serves the purpose of speaker damage protection circuits
Frequently Asked Questions
Q: Speaking of connections, what other speaker types can be connected to the AVG-2000?
A: The built-in amplifier supports seven speakers, including two A and B types as front speakers, a single center speaker, one rear speaker, and two surround speakers.
Q: I have a Denon remote control and I would like to know: is it possible to use this remote control with the amplifier?
A: No, The remote controller offered with the AVG-2000 is calibration for the specific model and it is designated as RC-120 for use with the specific model
Q: What is the way to switch audio input sources? Can I simply change the audio input sources by selecting the audio device used?
A: Each audio input source is associated with different connection points (AM, CD tape, Tuner, AUX, DAT). There are input selector buttons that let you change from one audio source to another.
Q: Can I have the Dolby Surround playback on this amplifier?
A: Absolutely, the AVG-2000 is compatible with Dolby Prologic surround sound technology for an enriched audio experience.
Q: There has been a humming noise, what’s the solution?
A: Make sure that the turntable’s ground wire is connected firmly and also try to keep the amplifier away from any interference sources which include TV antennas.
Q: Which is the correct method to locate the setting for the amplifier?
A: On the back panel of the AVG-2000 are two voltage selectors, both can be adjusted by means of a screwdriver. To ensure the right voltage, always ensure that both are switched to the same position.
User Manual
Loading...