
De’Longhi Appliances via Seitz, 47 31100 Treviso Italia
1191036IDL/11.13

IT
pag. 7 page 17 page 26 S.36
EN
FR
DE
NL
pag. 46 pág. 56 pág. 66 σελ. 76
HU
old. 86 str. 96 str. 106 str. 115
HR
str. 125 str. 135
TR
say. 165 11 2
ES
CS
SL
FA
PT
SK
BG
pag. 144
AR
EL
PL
RO
стр. 155
ELECTRICAL CONNECTION UK ONLY
A) If your appliance comes tted with a plug, it will incorpo-
rate a 13 Amp fuse. If it does not t your socket, the plug
should be cut o from the mains lead, and an appropriate
plug tted, as below.
WARNING: Very carefully dispose of the cut o plug after
removing the fuse: do not insert in a 13 Amp socket elsewhere in the house as this could cause a shock hazard.
With alternative plugs not incorporating a fuse, the cir-
cuit must be protected by a 15 Amp fuse. If the plug is a
moulded-on type, the fuse cover must be re-tted when
changing the fuse using a 13 Amp Asta approved fuse to
BS 1362. In the event of losing the fuse cover, the plug
must NOT be used until a replacement fuse cover can be
obtained from your nearest electrical dealer. The colour of
the correct replacement fuse cover is that as marked on the
base of the plug.
B) If your appliance is not tted with a plug, please follow the
instructions provided below:
WARNING - THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in the mains lead are coloured in accordance with the
following code:
Green and yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in
your plug, proceed as follows:
The green and yellow wire must be connected to the terminal
in the plug marked with the letter E or the earth symbol or
coloured green or green and yellow.
The blue wire must be connected to the terminal marked with
the letter N or coloured black.
The brown wire must be connected to the terminal marked with
the letter L or coloured red.