Delonghi ECAM65055MS User Manual

Download

Page 1

ECAM65X.55

BEAN TO CUP ESPRESSO

AND CAPPUCCINO

MACHINE

Instruction for use

Page 2

page 6

B2 B3

B1 B4

B10

B11

B12

B13

10:00

SELECT BEVERAGE

QUANTITY AROMA

B8 B6B7B9

PROFILE 1

B14

B15

B16

B17

Page 3

A21

A20

A10

A19

A18

A11

A15

A12

A13

A16

A17

A14

Page 4

3321

765

1110

MILK

1615

Page 5

CLEAN

21 22

201817

2423

28A

28B

PUSH

3231

Page 6

CONTENTS

1. FUNDAMENTAL SAFETY WARNINGS ............7

2. SAFETY WARNINGS ....................................8

2.1 Symbols used in these instructions ...............8

2.2 Designated use ..............................................8

2.3 Instruction for Use .........................................8

3. INTRODUCTION ......................................... 8

3.1 Letters in brackets .........................................8

3.2 Troubleshooting and repairs ..........................8

3.3 Download the App! .......................................8

4. DESCRIPTION.............................................9

4.1 Description of the appliance ..........................9

4.2 Description of the homepage (main screen)

(page 2 - B) ...................................................9

4.3 Description of the accessories ........................9

4.4 Description of the milk container ..................9

5. BEFORE USE...............................................9

5.1 Checking the appliance .................................9

5.2 Installing the appliance ................................. 9

5.3 Connecting the appliance ............................10

5.4 Setting up the appliance .............................10

6. TURNING THE APPLIANCE ON....................10

7. TURNING THE APPLIANCE OFF .................. 10

8. MENU SETTINGS ...................................... 11

8.1 Rinsing ......................................................11

8.2 Descaling ....................................................11

8.3 Water lter ...............................................11

8.4 Beverages settings ....................................11

8.5 Setting the time ........................................11

8.6 Auto-start ..................................................11

8.7 Auto-o (standby) ...................................... 12

8.8 Cup warmer.................................................12

8.9 Energy saving ............................................12

8.10 Coee temperature ....................................12

8.11 Water hardness ..........................................12

8.12 Selecting the language ..............................12

8.13 Beep ..........................................................13

8.14 Cup lighting ...............................................13

8.15 Bluetooth ...................................................13

8.16 Demo mode ................................................13

8.17 Default values ...........................................13

8.18 Statistics .....................................................13

9. MAKING COFFEE ...................................... 14

9.1 Selecting the coee aroma .......................... 14

9.2 Selecting the coee quantity ......................14

9.3 Adjusting the coee mill .............................14

9.4 Tips for a hotter coee.................................14

9.5 Making coee using coee beans ...............14

9.6 Making coee using pre-ground coee ....... 15

10. MAKING CAPPUCCINOS AND MILKBASED

COFFEES .................................................. 15

10.1 Filling and attaching the milk container ......15

10.2 Regolare la quantità di schiuma ..................16

10.3 Making cappuccinos and milk-based coees

automatically ..............................................16

10.4 Cleaning the milk container after every use 16

11. DELIVERING HOT WATER .......................... 16

12. STEAM DELIVERY ..................................... 17

12.1 Tips for using steam to froth milk ................ 17

12.2 Clean the hot water/steam spout after use .17

13. CUSTOMISING THE BEVERAGES ................ 17

14. MEMORISING YOUR PERSONAL PROFILE .... 18

15. CLEANING................................................ 18

15.1 Cleaning the machine .................................18

15.2 Cleaning the machine’s internal circuit .......18

15.3 Cleaning the coee grounds container .......18

15.4 Cleaning the drip tray ..................................19

15.5 Cleaning the inside of the coee machine ...19

15.6 Cleaning the water tank ..............................19

15.7 Cleaning the coee spouts ..........................19

15.8 Cleaning the pre-ground coee funnel .......19

15.9 Cleaning the infuser ....................................19

15.10 Cleaning the milk container ........................20

15.11 Cleaning the hot water/steam connection

nozzle..........................................................20

16. DESCALING .............................................. 20

17. SETTING WATER HARDNESS ......................21

17.1 Measuring water hardness ..........................21

17.2 Setting water hardness ............................. 22

18. WATER SOFTENER FILTER ......................... 22

18.1 Installing the lter ......................................22

18.2 Replacing the lter ...................................... 23

18.3 Removing the lter .....................................23

19. TECHNICAL DATA ...................................... 23

20. DISPOSAL ................................................ 23

21. DISPLAYED MESSAGES .............................. 24

22. TROUBLESHOOTING .................................28

23. ELECTRICAL CONNECTION UK ONLY ......... 30

Page 7

1. FUNDAMENTAL SAFETY WARNINGS

• The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• Cleaning and user maintenance shall not be made by children without supervision.

• Never clean by immersing the appliance in water.

• This is an household appliance only. It is not intended to be used in: sta kitchen areas in shops, oces and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments.

• If the plug or cord is damaged, it must be replaced by Customer Services only to avoid all risk.

FOR EUROPEAN MARKETS ONLY:

• This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. User cleaning and maintenance shall not be made by children unless they are above 8 years old and supervised. Keep the appliance and power cord away from children under 8 years of age.

• The appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are supervised or have been given instruction concerning use of the appliance in a safe way and if they understand the hazards involved.

• Children shall not play with the appliance.

• Always unplug the appliance when left unattended and before assembly, taking apart or cleaning.

Surfaces marked with this symbol become hot during use (the symbol is present in certain models only).

Page 8

2. SAFETY WARNINGS

2.1 Symbols used in these instructions

Important warnings are identied by these symbols. It is vital to respect these warnings.

Danger!

Failure to observe the warning may result in life threatening injury by electric shock.

Important!

Failure to observe the warning could result in injury or damage to the appliance.

Danger of burns!

Failure to observe the warning could result in scalds or burns.

Please note:

This symbol identies important advice or information for the user.

Danger!

This is an electrical appliance and may cause electric shock. You should therefore follow these safety warnings:

• Never touch the appliance with damp hands or feet.

• Never touch the plug with damp hands.

• Make sure the socket used is freely accessible at all times,

enabling the appliance to be unplugged when necessary.

• Unplug directly from the plug only. Never pull the cord as

you could damage it.

• To disconnect the appliance completely you must unplug it

from the mains socket.

• If the appliance is faulty, do not attempt to repair.

Turn it o, unplug from the mains socket and contact Cus-

tomer Services.

• Before cleaning the appliance, turn it o, unplug from the

mains socket and allow to cool.

Important:

Keep all packaging (plastic bags, polystyrene foam) away from children.

Danger of burns!

This appliance produces hot water and steam may form while it is in operation. Avoid contact with splashes of water or hot steam. When the appliance is in operation, the cup shelf could become very hot.

2.2 Designated use

This appliance is designed and made to prepare coee and milk and heat beverages.

Any other use is considered improper and thus dangerous. The manufacturer is not liable for damage deriving from improper use of the appliance.

2.3 Instruction for Use

Read this Instruction for Use carefully before using the appliance. Failure to follow this Instruction for Use may result in burns or damage to the appliance. The manufacturer is not liable for damage deriving from failure to respect this Instruction for Use.

Please note:

Keep this Instruction for Use. If the appliance is passed to other persons, they must also be provided with this Instruction for Use.

3. INTRODUCTION

Thank you for choosing this bean to cup espresso and cappuccino machine. Take a few minutes to read this Instruction for Use. This will avoid all risks and damage to the appliance.

3.1 Letters in brackets

The letters in brackets refer to the legend in the description of the appliance on pages 2-3.

3.2 Troubleshooting and repairs

In the event of problems, rst try and resolve them by reading the information given in the sections “21. Displayed messages” and “22. Troubleshooting”. If this does not resolve the problem or you require further information, you should consult Customer Services by calling the number given on the annexed “Customer Service” sheet. If your country is not among those listed on the sheet, call the number given in the guarantee. If repairs are required, contact De’Longhi Customer Services only. The addresses are given in the guarantee certicate provided with the machine.

3.3 Download the App!

A number of functions can be controlled remotely using the De’Longhi Coee Link App.

Page 9

In the App, you can also nd information, tips and curious facts about the world of coee, together with information on your machine at your ngertips.

This symbol highlights the functions you can control or

consult using the App. You can also create up to 6 new beverages and save them in your appliance.

Please note:

Check compatible devices on “PrimaDonnaElite.delonghi.com”.

B9. Quantity selection

Directly selected beverages:

B10. CAPPUCCINO B11. LATTE MACCHIATO B12. CAFFELATTE B13. MILK B14. ESPRESSO B15. COFFEE B16. LONG B17. DOPPIO+

4. DESCRIPTION

4.1 Description of the appliance

(page 3 - A ) A1. Beans container lid A2. Pre-ground coee funnel lid A3. Beans container A4. Pre-ground coee funnel A5. Grinding adjustment dial A6. Cup warmer shelf

button: to turn the appliance on and o (standby)

A7. A8. Coee spouts (adjustable height) A9. Hot water/steam connection nozzle A10. Coee grounds container A11. Cup tray A12. Drip tray water level indicator A13. Drip tray grille A14. Drip tray A15. Water tank lid A16. Water tank A17. Water softener lter housing A18. Infuser door A19. Infuser A20. Power cord connector socket A21. Main switch (ON/OFF)

4.2 Description of the homepage (main screen)

(page 2 - B)

B1. Display B2. Selection arrows B3. Beverage selection menu (other than directly selected

beverages): CAPPUCCINO+, FLAT WHITE, CAPPUCCINO MIX, ESPRESSO MACCHIATO, HOT WATER, X2 ESPRESSO, STEAM;

B4. Customisable proles (see section “14. Memorising your

personal prole”) B5. Aroma selection B6.

B8. : appliance settings menu

: menu to customise the beverage settings

4.3 Description of the accessories

(page 2 - C ) C1. “Total Hardness Test” indicator paper C2. Pre-ground coee measure C3. Descaler C4. Water softener lter (certain models only) C5. Cleaning brush C6. Hot water/steam spout C7. Spout release button C8. Power cord

4.4 Description of the milk container

(page 2 - D ) D1. Froth adjustment and CLEAN dial D2. Milk container lid D3. Milk container D4. Milk intake tube D5. Frothed milk spout (adjustable)

5. BEFORE USE

5.1 Checking the appliance

After removing the packaging, make sure the product is complete and undamaged and that all accessories are present. Do not use the appliance if it is visibly damaged. Contact De’Longhi Customer Services.

5.2 Installing the appliance

Important!

When you install the appliance, you should respect the following safety warnings:

• The appliance gives o heat. After positioning the appliance on the worktop, leave a space of at least 3 cm between the surfaces of the appliance and the side and rear walls and at least 15 cm above the coee maker.

• Water penetrating the coee maker could cause damage.

Do not place the appliance near taps or sinks.

• The appliance could be damaged if the water it contains freezes.

Page 10

Do not install the appliance in a room where the tempera-

ture could drop below freezing point.

• Arrange the cord in such a way that it cannot be damaged by sharp edges or contact with hot surfaces (e.g. electric hot plates).

5.3 Connecting the appliance

Important!

Check that the mains power supply voltage corresponds to that indicated on the rating plate on the bottom of the appliance. Connect the appliance to a correctly installed and eciently earthed socket with a minimum current rating of 10A only. If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualied electrician.

5.4 Setting up the appliance

Please note!

• Coee has been used to factory test the appliance and it is therefore completely normal for there to be traces of coffee in the mill. The machine is, however, guaranteed to be new.

• You should customise water hardness as soon as possible following the instructions in section “17. Setting water hardness”.

1. Plug the power cord (C8) connector into the socket (A20) at the back of the appliance and connect the appliance to the mains electricity supply (g. 1). Make sure the main switch (A21) at the back of the appliance is pressed (g. 2);

2. “SELECT LANGUAGE”: Press the selection arrow (B2) corresponding to the required language;

then follow the instructions which appear on the appliance display:

3. “FILL TANK WITH FRESH WATER”: remove the water tank (A16) (g. 3), open the lid (A15) (g. 4), ll to the MAX line with fresh water (g. 5), close the lid and put the tank back in the appliance (g. 6);

4. “INSERT WATER SPOUT”: Check that the hot water/steam spout (C6) is inserted on the connection nozzle (A9) (g. 7) and place a container holding a minimum of 100 ml underneath (g. 8);

5. “WATER CIRCUIT EMPTY PRESS OK TO START” appears on the display;

6. Press the selection arrow corresponding to “OK ” to conrm. The appliance delivers hot water from the hot water spout (g. 8) then goes o automatically.

The coee machine is now ready for normal use.

Please note!

• When setting up the appliance, you need to make 4-5 cups of coee or 4-5 cappuccinos before the appliance starts to give satisfactory results.

• When making the rst 5-6 cappuccinos, it is normal to hear the noise of boiling water. After this, the noise becomes less.

• To improve the performance of your appliance, we recommend installing a water softener lter (C4) as described in section “18. Water softener lter”. If your model is not provided with a lter, you can request one from De’Longhi Customer Services.

6. TURNING THE APPLIANCE ON

Please note!

Before turning the appliance on, make sure the main switch (A21) is pressed (g. 2). Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted. The appliance is ready for use only after completion of this cycle.

Danger of burns!

During rinsing, a little hot water comes out of the coee spouts (A8) and is collected in the drip tray (A14) underneath. Avoid contact with splashes of water.

• To turn the appliance on, press the

9). The message “HEATING UP UNDERWAY PLEASE WAIT” appears on the display.

As well as heating the boiler, this also heats the internal circuits by circulating hot water. The appliance is at temperature when the main screen (homepage) appears.

button (A7-g.

7. TURNING THE APPLIANCE OFF

Whenever the coee machine is turned o after being used to make coee, it performs an automatic rinse cycle.

Danger of burns!

During rinsing, a little hot water ows from the coee spouts (A8). Avoid contact with splashes of water.

• To turn the appliance o, press the button (A7-g.

9).

• The message “TURNING OFF UNDERWAY, PLEASE WAIT” appears on the display, then (if envisaged) the appliance performs a rinse cycle and goes o (standby).

Please note!

If you will not be using the appliance for some time, unplug from the mains socket:

• rst turn the appliance o by pressing the button (g. 9);

Page 11

• release the main switch (A21) at the back of the appliance (g. 2).

Important!

Never press the main switch while the appliance is on.

8. MENU SETTINGS

8.1 Rinsing

Use this function to deliver hot water from the coee spouts (A8) and hot water/steam spout (C6), if inserted, to clean and heat the appliance’s internal circuit. Place a container with a minimum capacity of 100ml under the coee and hot water spouts (g. 8). To enable the function, proceed as follows:

1. Press the selection arrow (B2) corresponding to the “ ” symbol (B8) to enter the menu;

2. Press the selection arrow corresponding to “

Important! Danger of burns.

Do not leave the appliance unattended while hot water is being delivered.

3. After a few seconds, hot water is delivered rst from the coee spouts, then from the hot water/steam spout (if inserted) to clean and heat the appliance’s internal circuit. “RINSING UNDERWAY” appears on the display, together with a progress bar which lls gradually as preparation proceeds;

4. To interrupt rinsing, press the selection arrow corresponding to “STOP

Please note!

• If the appliance is not used for more than 3-4 days, when you turn it on again, we strongly recommend performing 2/3 rinses before use;

• After cleaning, it is normal for the grounds container (A10) to contain water.

” or wait for rinsing to stop automatically.

RINSING”;

8.2 Descaling

For instructions on descaling, see section “16. Descaling”.

2. Scroll through the menu items by pressing the selection arrow corresponding to “NEXT>” until “ SETTINGS” appears on the display;

3. The values for the rst beverage appear on the display;

4. The reference user prole is highlighted on the display. The values are displayed on vertical bars. The default value is

indicated by the highlighted by the solid part of the vertical bar;

5. To go back to the settings menu, press the selection arrow corresponding to “ ESC”. To scroll through and display the beverages, press the selection arrow corresponding to “NEXT>”;

6. To reset the default values for the beverage displayed, press the selection arrow corresponding to “

7. “CONFIRM RESET?”: to conrm press the selection arrow corresponding to “ arrow corresponding to “ ESC”);

8. “DEFAULT VALUES SET”: press “

The beverage has been reset to the default values. Proceed with the other beverages or go back to the homepage by pressing the arrow corresponding to “ ESC” twice.

symbol, while the current value is

” to cancel, press the selection

” .

BEVERAGES

RESET”;

8.5 Setting the time

To adjust the time on the display (B1), proceed as follows:

1. Press the selection arrow (B2) corresponding to the “ symbol (B8) to enter the menu;

2. Scroll through the menu items by pressing the selection arrow corresponding to “NEXT>” until “ appears on the display;

3. Press the selection arrow corresponding to “ The time setting panel appears on the display;

4. Adjust the time by pressing the selection arrows corresponding to hours (H) and minutes (MIN); To conrm, press the selection arrow corresponding to “OK

5. ” (to cancel, press the selection arrow corresponding to ESC”)and press the selection arrow corresponding to “ ESC” to go back to the homepage.

The time is now set.

(increase) or (decrease) for the

SET TIME”

SET TIME”;

“

”

8.3 Water lter

For instructions on how to install the lter (C4), see section “18. Water softener lter”.

8.4 Beverages settings

In this section, you can consult your customised settings and, if you wish, reset the default values for each beverage.

1. Press the selection arrow (B2) corresponding to the “ symbol (B8) to enter the menu;

8.6 Auto-start

You can set the auto-start time in order to have the appliance ready at a certain time (for example in the morning) so you can make coee immediately.

Please note!

To enable this function, the time must already be set correctly (see section “8.5 Setting the time ”).

”

To enable auto-start, proceed as follows:

Page 12

1. Press the selection arrow (B2) corresponding to the “ ” symbol (B8) to enter the menu;

2. Scroll through the menu items by pressing the selection arrow corresponding to “NEXT>” until “AUTO-START

” appears on the display;

3. Press the selection arrow corresponding to “AUTO-START

”. Disable (or enable) the function by pressing the

selection arrow corresponding to (or );

4. Press the selection arrow corresponding to “SET TIME

”. The time setting panel appears on the display (B1);

5. Adjust the time by pressing the selection arrows corresponding to hours (H) and minutes (MIN); To conrm, press the selection arrow corresponding to “OK

”;

7. Press the selection arrow corresponding to “ ESC” twice to go back to the homepage.

The auto-start time is now set and the corresponding symbol is displayed to indicate that the function has been enabled.

(increase) or decrease) for the

8.7 Auto-o (standby)

Auto-o can be set so that the appliance goes o after 15 or 30 minutes, or 1, 2 or 3 hours. To programme Auto-o, proceed as follows:

1. Press the selection arrow (B2) corresponding to the “ symbol (B8) to enter the menu;

2. Scroll through the menu items by pressing the selection arrow corresponding to “NEXT>” until “AUTO-OFF appears on the display;

3. Press the selection arrow corresponding to “AUTO-OFF

4. Select the required time interval by pressing the selection arrows corresponding to crease) the values;

5. To conrm, press the selection arrow corresponding to “OK

”;

6. Press the selection arrow corresponding to “ back to the homepage.

Auto-o is now programmed.

(increase) or (de-

”;

ESC” to go

4. Press the selection arrow corresponding to “ back to the homepage.

8.9 Energy saving

Use this function to enable or disable energy saving. When enabled, the function reduces energy consumption in compliance with European regulations. To disable or enable “Energy Saving”, proceed as follows:

1. Press the selection arrow (B2) corresponding to the “ symbol (B8) to enter the menu;

2. Scroll through the menu items by pressing the selection arrow corresponding to “NEXT>” until “ENERGY SAVING” appears on the display;

3. Press the selection arrow corresponding to “ENERGY SAVING”

to disable (

4. Press the selection arrow corresponding to “ back to the homepage.

) or enable ( ) the function.

8.10 Coee temperature

To modify the temperature of the water used to make the coee, proceed as follows:

1. Press the selection arrow (B2) corresponding to the “ symbol (B8) to enter the menu;

2. Scroll through the menu items by pressing the selection

”

arrow corresponding to “NEXT>” until ATURE” appears on the display;

3. Press the selection arrow corresponding to PERATURE”. The selectable values appear on the display (B1) (the current value is underlined);

4. Press the selection arrow corresponding to the value you want to set (LOW, MEDIUM, HIGH, MAX);

5. Press the selection arrow corresponding to “ ESC” twice to go back to the homepage.

Please note!

A dierent temperature can be set for each prole (see section “14. Memorising your personal prole”).

“ COFFEE TEMPER-

“ COFFEE TEM-

ESC” to go

”

ESC” to go

”

8.8 Cup warmer

To warm the cups before making coee, you can enable the cup warmer (A6) and rest the cups on the shelf.

1. Press the selection arrow (B2) corresponding to the “ symbol (B8) to enter the menu;

2. Scroll through the menu items by pressing the selection arrow corresponding to “NEXT>” until “CUP WARMER” appears on the display;

3. Press the selection arrow corresponding to “CUP WARMER”

to disable (

) or enable ( ) the function.

8.11 Water hardness

For instructions on setting water hardness, see section “17. Setting water hardness”.

”

8.12 Selecting the language

To modify the language of the display (B1), proceed as follows:

1. Press the selection arrow (B2) corresponding to the “ symbol (B8) to enter the menu; Scroll through the menu items by pressing the selection

2. arrow corresponding to “NEXT>” until “SET LANGUAGE

appears on the display;

”

Page 13

3. Press the selection arrow corresponding to “SET LANGUAGE ”;

4. Press the selection arrow corresponding to the language re-

quired (press the selection arrow corresponding to “NEXT>” to display all the languages available);

5. Press the selection arrow corresponding to “

to go back to the homepage.

8.13 Beep

This enables or disables the beep emitted by the machine each time an icon is pressed or an accessory is inserted/removed. To disable or enable the beep, proceed as follows:

1. Press the selection arrow (B2) corresponding to the “

symbol (B8) to enter the menu;

2. Scroll through the menu items by pressing the selection

arrow corresponding to “NEXT>” until “BEEP” appears on the display;

3. Press the selection arrow corresponding to “BEEP” to disable

) or enable ( ) the function;

(

4. Press the selection arrow corresponding to “

back to the homepage.

8.14 Cup lighting

This function enables or disables the cup lights. The lighting is enabled by default. The lights come on each time a coee or milk-based beverage is made and during each rinsing cycle. To disable or enable this function, proceed as follows:

1. Press the selection arrow (B2) corresponding to the “

symbol (B8) to enter the menu;

2. Scroll through the menu items by pressing the selection

arrow corresponding to “NEXT>” until “CUP LIGHTING” appears on the display;

3. Press the selection arrow corresponding to “CUP LIGHTING”

to disable (

4. Press the selection arrow corresponding to “

back to the homepage.

) or enable ( ) the function;

ESC” twice

ESC” to go

8.15 Bluetooth

This function enables or disables the protection PIN to connect to the appliance from a device.

1. Press the selection arrow (B2) corresponding to the “

symbol (B8) to enter the menu;

2. Scroll through the menu items by pressing the selection

arrow corresponding to “NEXT>” until “ pears on the display;

3. Press the selection arrow corresponding to “

The serial number of the machine (19 digits) and a 4 digit number (PIN) appear on the display (B1);

BLUETOOTH” ap-

BLUETOOTH”

4. Press the selection arrow to disable the request for the PIN when you connect via the APP;

5. Press the selection arrow corresponding to “ to go back to the homepage.

The preset PIN is “0000”. You are recommended to customise the PIN directly from the APP.

Please note!

The serial number of the appliance enables it to be identied unambiguously when an association is created with the APP.

8.16 Demo mode

When this mode is enabled, the appliance’s main functions are

”

illustrated on the display:

1. Press the selection arrow (B2) corresponding to the “ symbol (B8) to enter the menu;

2. Scroll through the menu items by pressing the selection arrow corresponding to “NEXT>” until “ MODE” appears on the display;

3. Press the selection arrow corresponding to “ MODALITA’ DEMO”. The demo begins;

4. Press the selection arrow corresponding to “ to go back to the homepage.

8.17 Default values

This resets all menu settings and programmed quantities back to the default values (with the exception of the language which remains as set). To reset the default values, proceed as follows:

”

1. Press the selection arrow (B2) corresponding to the “ symbol (B8) to enter the menu;

2. Scroll through the menu items by pressing the selection arrow corresponding to “NEXT>” until “ VALUES” appears on the display;

3. “DEFAULT VALUES CONFIRM?”: to conrm press the selection arrow corresponding to “OK tion arrow corresponding to “ ESC”);

4. “DEFAULT VALUES SET”: press the selection arrow corresponding to “OK ” to conrm;

5. Press the selection arrow corresponding to “ ESC” to go back to the homepage.

”

8.18 Statistics

This displays statistics relating to the machine. To display the statistics, proceed as follows:

1. Press the selection arrow (B2) corresponding to the “

symbol (B8) to enter the menu;

2. Scroll through the menu items by pressing the selection arrow corresponding to “NEXT>” until “

appears on the display;

( ) or enable ( )

ESC” twice

”

DEMO

ESC” twice

”

DEFAULT

” (to cancel, press the selec-

”

STATISTICS”

Page 14

3. Press the selection arrow corresponding to “ STATISTICS” and check all the statistics by scrolling through the items using the selection arrow corresponding to “NEXT>”;

4. Press “

ESC” twice to go back to the homepage.

9. MAKING COFFEE

9.1 Selecting the coee aroma

Select the required coee aroma by pressing the selection arrow (B2) corresponding to “AROMA” (B5):

(see “9.6 Making coee using pre-ground coee”)

X-LIGHT

LIGHT

MEDIUM

STRONG

X-STRONG

Custom (if programmed) / Standard

9.2 Selecting the coee quantity

Select the required coee aroma by pressing the selection arrow (B2) corresponding to “QUANTITY” (B9):

SMALL SIZE

MEDIUM SIZE

LARGE SIZE

X-LARGE SIZE

Custom quantity (if programmed) / Standard quantity

9.3 Adjusting the coee mill

The coee mill is set by default to prepare coee correctly and should not require regulating initially. However, if after making the rst few coees you nd that the coee is either too weak and not creamy enough or delivery is too slow (a drop at a time), this can be corrected by adjusting the grinding adjustment dial (A5 - g. 10).

Please note!

The grinding adjustment dial must only be turned when the coee mill is in operation.

If the coee is delivered too slowly or not at all, turn one click clockwise towards “7”. For fuller bodied creamier coee, turn one click anticlockwise towards “1” (do

not turn more than one click at a time otherwise the coee could be delivered a drop at a time). These adjustments will only be evident after at least 2 cups of coee have been delivered. If this adjustment does not obtain the desired result, turn the dial another click.

9.4 Tips for a hotter coee

For hotter coee, you should:

• perform a rinse cycle by selecting the “Rinse” function in

the settings menu (see section “8.1 Rinsing ”);

• warm the cups with hot water using the hot water function

(see section “11. Delivering hot water”);

• increase the coee temperature in the settings menu (see

section “8.10 Coee temperature

”).

9.5 Making coee using coee beans

Important!

Do not use caramelised or candied coee beans as they could stick to the coee mill and make it unusable.

1. Fill the container (A3) (g. 11) with coee beans;

2. Place a cup under the coee spouts (A8);

3. Lower the spouts as near as possible to the cup (g. 12).

This makes a creamier coee;

4. Then select your required coee:

- ESPRESSO (B14)

- COFFEE (B15)

- LONG (B16)

- DOPPIO+ (B17);

6. Preparation begins. An image of the selected beverage

appears on the display (B1) together with a progress bar which gradually lls as preparation progresses.

Please note:

• You can prepare 2 cups of ESPRESSO coee at the same

time by pressing “2X a few seconds whenever you start preparing 1 ESPRESSO) or selecting “2X ESPRESSO” from the beverage selection menu (B3);

“ (the image is displayed for

Page 15

• While the machine is making coee, delivery can be interrupted at any moment by pressing the selection arrow corresponding to “STOP

• As soon as delivery has ended, to increase the quantity of coee in the cup, just press the selection arrow corresponding “EXTRA press the selection arrow corresponding to “STOP “.

Once the coee has been made, the appliance is ready to make the next beverage.

Please note!

• Various alarm messages could be displayed while using the appliance (FILL TANK, EMPTY GROUNDS CONTAINER, etc.). Their meaning is explained in section “21. Displayed messages”.

• For hotter coee, see section “9.4 Tips for a hotter coee”.

• If the coee is delivered a drop at a time, too weak and not creamy enough or too cold, read the tips in section “9.3 Adjusting the coee mill” and section “22. Troubleshooting”.

• Preparation of each coee can be customised (see sections “13. Customising the beverages” and “14. Memorising your personal prole”).

“.

”. When the required quantity is reached,

9.6 Making coee using pre-ground coee

Important!

• Never add pre-ground coee when the machine is o or it could spread through the inside of the machine and dirty it. This could damage the appliance.

• Never use more than 1 level measure (C2) or it could dirty the inside of the coee machine or block the funnel (A4).

Please note!

If you use pre-ground coee, you can only make one cup of coffee at a time.

1. Press the selection arrow (B2) corresponding to “AROMA” (B9) until “ ” (pre-ground) appears on the display (B1).

2. Open the pre-ground coee funnel lid (A2).

3. Make sure the funnel (A4) is not blocked, then add one level measure of pre-ground coee (g. 13).

4. Place a cup under the coee spouts (A8) (g. 12).

5. Press the symbol corresponding to the required coee:

- ESPRESSO (B14)

- COFFEE (B15)

- LONG (B16)

6. Preparation begins. An image of the selected beverage appears on the display, together with a progress bar which gradually lls as preparation progresses.

Important! Making LONG coee:

Halfway through preparation, the message “ADD GROUND COFFEE” is displayed. Add one level measure of pre-ground coee and press “OK

Please note!

If “Energy Saving” mode is active, you may have to wait a few seconds before the rst coee is delivered.

” .

10. MAKING CAPPUCCINOS AND MILKBASED COFFEES

Please note!

• To avoid producing milk with poor froth or large bubbles,

always clean the milk container lid (D2) and hot water connection nozzle (A9) as described in sections “10.4 Cleaning the milk container after every use”, “15.10 Cleaning the milk container” and “15.11 Cleaning the hot water/steam connection nozzle”.

10.1 Filling and attaching the milk container

1. Remove the lid (D2) (g. 14);

2. Fill the milk container (D3) with a sucient quantity of

milk, not exceeding the MAX level marked on the container (g. 15). Each mark on the side of the container corresponds to about 100 ml of milk;

Please note!

• For a denser more even froth, you must use skimmed or

partially skimmed milk at refrigerator temperature (about 5°C).

• If “Energy Saving” mode is enabled, you may have to wait a

few seconds before the beverage is delivered.

3. Make sure the milk intake tube (D4) is correctly inserted in

the bottom of the milk container lid (g. 16);

4. Place the lid back on the milk container;

5. If present, extract the hot water/steam spout (C6) by press-

ing the release button (C7) (g. 17);

6. Attach the milk container (D) to the connection nozzle (A9)

(g. 18) and push as far as it will go. The machine emits a beep (if the beep function is enabled);

7. Place a suciently large cup under the coee spouts (A8)

and frothed milk spout (D5). Adjust the length of the milk spout. To move it nearer the cup, simply pull it downwards (g. 19).

8. Follow the instructions below for each function.

Page 16

10.2 Regolare la quantità di schiuma

Turn the froth adjustment dial (D1) to adjust the amount of froth on the milk delivered while making cappuccinos and milk-based coees.

Dial position

Description Recommended for…

NO FROTH HOT MILK (not frothed)/

CAFFELATTE

MIN. FROTH LATTE MACCHIATO /

FLAT WHITE

MAX. FROTH

CAPPUCCINO / CAPPUCCI NO+ / CAPPUCCINO MIX / ESPRESSO MACCHIATO / HOT MILK (frothed)

10.3 Making cappuccinos and milkbased coees automatically

1. Fill the milk container (D) and attach it as described above.

2. Select the required beverage:

Directly selected beverages:

• CAPPUCCINO (B10)

• LATTE MACCHIATO (B11)

• CAFFELATTE (B12)

• MILK (B13)

Selectable from the beverages selection menu (B3):

• CAPPUCCINO+

• ESPRESSO MACCHIATO

• FLAT WHITE

• CAPPUCCINO MIX

3. A message on the display (B1) instructs you to turn the

froth adjustment dial (D1) according to the froth required by the original recipe. Turn the dial on the milk container lid (D2) and conrm the selection by pressing the selection arrow corresponding to “OK ”.

4. After a few seconds, preparation begins automatically and

an image of the selected beverage appears on the display, together with a progress bar which gradually lls as preparation progresses.

Please note: general indications when preparing all

milk-based beverages

• “ ESC”: press to interrupt preparation completely and

go back to the homepage.

• Press the selection arrow corresponding to the “STOP ”

symbol to interrupt milk or coee delivery and move on to the next delivery to complete the beverage.

• At the end of delivery, to increase the quantity of coee in the cup, press the selection arrow corresponding to “ EXTRA”.

• Preparation of each coee can be customised (see sections “13. Customising the beverages” and “14. Memorising your personal prole”).

• Do not leave the milk container out of the refrigerator for long periods. The warmer the milk (5°C is ideal), the poorer the quality of froth produced.

Once the coee has been made, the appliance is ready to make the next beverage.

10.4 Cleaning the milk container after every use

Important! Danger of burns

When cleaning the internal tubes of the milk container, a little hot water and steam leak out of the frothed milk spout (D5). Avoid contact with splashes of water. Each time you use a milk function, “TURN DIAL TO CLEAN POSITION” appears on the display and the milk frother lid must be cleaned:

1. Leave the milk container (D) in the machine (you do not need to empty it);

2. Place a cup or other recipient under the frothed milk spout (g. 21);

3. Turn the froth adjustment dial (D1) to “CLEAN” (g. 20). “CLEANING UNDERWAY RECIPIENT UNDER SPOUT” appears on the display (B1) together with a bar which gradually lls as cleaning progresses. Cleaning stops automatically;

4. Turn the dial back to one of the froth selections;

5. Remove the milk container and always clean the steam connection nozzle (A9) with a sponge (g. 22).

Please note!

• To prepare a number of cappuccinos or milk-based coees, clean the milk container after you have prepared the last beverage only. To proceed with making the next beverages, press “ ESC”.

• If you do not clean the milk container, the symbol appears on the display to remind you that it needs cleaning.

• The milk container can be kept in the refrigerator.

• In some cases, before cleaning you must wait for the appliance to heat up.

11. DELIVERING HOT WATER

Important! Danger of burns.

Do not leave the appliance unattended while hot water is being delivered.

Page 17

1. Make sure the hot water/steam spout (C6) is attached correctly to the hot water/steam connection nozzle (A9);

2. Place a container under the spout (as close as possible to avoid splashes);

3. Press the selection arrow (B2) corresponding to the “ (B3) to enter the menu;

4. Press the selection arrow (B2) corresponding to the “NEXT>” symbol to display “HOT WATER”;

5. Press the selection arrow corresponding to “HOT WATER”. The corresponding image appears on the display (B1), together with a progress bar which lls gradually as preparation proceeds;

6. The machine delivers about 250 ml of hot water, then delivery stops automatically. To interrupt hot water delivery manually, press the selection arrow corresponding to

” icon again.

“STOP

Please note!

• If “Energy Saving” mode is active, you may have to wait a few seconds before the hot water is delivered.

• Preparation of each coee can be customised (see sections “13. Customising the beverages” and “14. Memorising your personal prole”).

12. STEAM DELIVERY

Important! Danger of burns.

Do not leave the appliance unattended while steam is being delivered.

1. Make sure the hot water/steam spout (C6) is attached correctly to the hot water/steam connection nozzle (A9);

2. Fill a container with the liquid to be heated or frothed and immerse the hot water/steam spout in the liquid;

3. Press the selection arrow (B2) corresponding to the “ ” symbol (B3) to enter the menu;

4. Press the selection arrow (B2) corresponding to the “NEXT>” symbol to display “STEAM”;

5. Press the selection arrow corresponding to “STEAM”. The corresponding image appears on the display (B1), together with a progress bar which lls gradually as preparation proceeds and after a few seconds, steam to heat the liquid is delivered from the cappuccino maker;

6. When the required temperature is obtained, interrupt steam delivery by pressing the “STOP not deliver steam for more than 3 minutes at a time).

Important!

Always stop steam delivery before extracting the container containing the liquid to avoid burns from splashes.

” icon. (You should

Please note!

If “Energy Saving” mode is active, you may have to wait a few seconds before the hot water is delivered.

”

12.1 Tips for using steam to froth milk

• When choosing the size of the container, bear in mind that the liquid doubles or triples in volume.

• For a richer denser froth, use skimmed or partially skimmed milk at refrigerator temperature (about 5°C).

• For a creamier froth, rotate the container with slow movements in an upward direction.

• To avoid milk with poor froth or large bubbles, always clean the spout (C6) as described in the following section.

12.2 Clean the hot water/steam spout after use

Always clean the hot water/steam spout (C6) after use to avoid the build-up of milk residues and prevent it from clogging.

Place a container under the hot water/steam spout and deliver a little water (see section “11. Delivering hot water”). To interrupt hot water delivery manually, press the selection arrow corresponding to “STOP ”.

2. Wait a few minutes for the hot water/steam spout to cool down, then extract (g. 17) by pressing the release button (C7). Hold the spout with one hand and with the other, turn the cappuccino maker and pull it downwards (g. 23).

3. Also remove the steam connection nozzle by pulling it downwards (g. 24).

4. Check the hole in the connection nozzle is not blocked. If necessary, clean using a toothpick.

5. Wash all parts of the spout thoroughly with a sponge and warm water.

6. Insert the nozzle and cappuccino maker on the connection nozzle by pushing them upwards and turning them clockwise until they are attached.

13. CUSTOMISING THE BEVERAGES

The aroma and quantity of the beverages can be customised.

1. Make sure the prole (B4) including the beverage you want to customise is active;

2. From the homepage, press the selection arrow (B2) corre-

sponding to

3. Select the beverage you want to customise (a directly selected beverage or from the beverages selection menu

- B3) to enter the customising screen;

4. “CHOOSE COFFEE AROMA”: Select the required aroma by pressing the selection arrows corresponding to “-” or “+” and press the selection arrow corresponding to “OK ” ;

(B6);

Page 18

5. “CUSTOMISING COFFEE QUANTITY STOP TO SAVE”: Preparation begins and the appliance displays the quantity customising screen in the form of a vertical bar. The star alongside the bar represents the current quantity.

6. When the quantity reaches the minimum quantity you can set, “STOP

7. When the required quantity is reached, press “STOP ”.

8. . “SAVE NEW SETTINGS?”: Press the selection arrow corresponding to “OK ” to save (or the selection arrow corresponding to ESC to cancel).

The appliance conrms if the values have been saved or not (depending on the previous selection). Press the selection arrow corresponding to “OK ”. The appliance goes back to the homepage.

Please note!

• Cappuccino and milk-based coees: the coee aroma is saved rst, followed by the quantity of rst milk, then coee;

• Hot water: the appliance delivers hot water. Press the selection arrow corresponding to “STOP ” to save the required quantity.

• You can also customise the beverages by connecting with the DeLonghi Coee Link App.

14.

The appliance allows you to memorise 6 dierent proles, each associated with a dierent icon. The prole displays the beverages most frequently selected from that prole and the aroma and quantity selections for each beverage are memorised. To select your personal prole, from the homepage press the

selection arrow corresponding to “ then select another numbered prole.

Please note!

• “ can deliver beverages with the default settings. The

function is not active.

• You can rename your personal prole by connecting with the DeLonghi Coee Link App (only the rst 3 characters will be shown).

” appears on the display (B1).

MEMORISING YOUR PERSONAL PROFILE

PR1” (PROFILE 1) (B4),

GUE” (GUEST) prole: when you select this prole, you

15. CLEANING

15.1 Cleaning the machine

The following parts of the machine must be cleaned regularly:

- the appliance’s internal circuit;

- coee grounds container (A10);

- drip tray (A14);

- water tank (A16);

- coee spouts (A8);

- pre-ground coee funnel (A4);

- infuser (A19), accessible after opening the infuser door (A18);

- milk container (D);

- hot water/steam connection nozzle (A9);

- display (B).

Important!

• Do not use solvents, abrasive detergents or alcohol to clean the coee machine. With De’Longhi superautomatic coee machines, you need not use chemical products to clean the machine.

• None of the components of the appliance can be washed in a dishwasher with the exception of the milk container (D).

• Do not use metal objects to remove encrustations or coee deposits as they could scratch metal or plastic surfaces.

15.2 Cleaning the machine’s internal circuit

If the appliance is not used for more than 3/4 days, before using it again, we strongly recommend switching it on and:

• performing 2/3 rinse cycles by selecting the “Rinse” function (section “8.1 Rinsing ”);

• delivering hot water for a few seconds (section “11. Delivering hot water”).

Please note!

After cleaning, it is normal for the grounds container (A10) to contain water.

15.3 Cleaning the coee grounds container

When “EMPTY GROUNDS CONTAINER” appears on the display (B1), the grounds container must be emptied and cleaned. The appliance cannot be used to make coee until you have cleaned the grounds container (A10). Even if not full, the empty grounds container message is displayed 72 hours after the rst coee has been prepared. For the 72 hours to be calculated correctly, the machine must never be turned o with the main switch.

Important! Danger of burns

If you make a number of cappuccinos one after the other, the metal cup tray (A11) becomes hot. Wait for it to cool down before touching it and handle it from the front only. To clean (with the machine on):

• Remove the drip tray (A14) (g. 25), empty and clean.

• Empty the grounds container (A10) and clean thoroughly to remove all residues left on the bottom. This can be done using the spatula on the brush (C5) provided.

Important!

Page 19

When removing the drip tray, the grounds container must be emptied, even if it contains few grounds. If this is not done, when you make the next coees, the grounds container may ll up more than expected and clog the machine.

15.8 Cleaning the pre-ground coee funnel

Check regularly (about once a month) that the pre-ground coee funnel (A4) is not blocked. If necessary, remove coee deposits with the brush (C5) supplied.

15.4 Cleaning the drip tray

Important!

The drip tray (A14) is tted with a level indicator (A12) (red) showing the level of water it contains (g. 34). Before the indicator protrudes from the cup tray (A11), the drip tray must be emptied and cleaned, otherwise the water may overow the edge and damage the appliance, the surface it rests on or the surrounding area. To remove the drip tray:

1. Remove the drip tray and the coee grounds container (A10) (g. 25);

2. Empt y the drip tray and grounds container and wash them;

3. Replace the drip tray and grounds container.

15.5 Cleaning the inside of the coee machine

Danger of electric shock!

Before cleaning internal parts, the machine must be turned o (see section “7. Turning the appliance o”) and unplugged from the mains power supply. Never immerse the coee machine in water.

1. Check regularly (about once a month) that the inside of the appliance (accessible after removing the drip tray, A14) is not dirty. If necessary, remove coee deposits with the brush (C5) supplied and a sponge.

2. Remove all the residues with a vacuum cleaner (g. 27).

15.6 Cleaning the water tank

1. Clean the water tank (A16) regularly (about once a month) and whenever you replace the water softener lter (C4) (if provided) with a damp cloth and a little mild washing up liquid;

2. Remove the lter (if present) and rinse with running water;

3. Replace the lter (if provided), ll the tank with fresh water and replace the tank;

4. (Models with water softener lter only) Deliver about 100ml of hot water to reactivate the lter.

15.9 Cleaning the infuser

The infuser (A19) must be cleaned at least once a month.

Important!

The infuser may not be extracted when the machine is on.

1. Make sure the machine is correctly turned o (see section “7. Turning the appliance o”);

2. Remove the water tank (A16) (g. 3);

3. Open the infuser door (A18) (g. 29) on the right side of the appliance;

4. Press the two coloured release buttons inwards and at the same time pull the infuser outwards (g. 30);

5. Soak the infuser in water for about 5 minutes, then rinse under the tap;

Important!

RINSE WITH WATER ONLY NO WASHING UP LIQUID  NO DISH WASHER Clean the infuser without using washing up liquid as it

could be damaged.

6. Use the brush (C5) to remove any coee residues left in the infuser housing, visible through the infuser door;

7. After cleaning, replace the infuser by sliding it onto the internal support (g. 31), then push the PUSH symbol fully in until it clicks into place;

Please note!

If the infuser is dicult to insert, before insertion, adapt it to the right size by pressing the two levers shown in g. 32.

8. Once inserted, make sure the two coloured buttons have snapped out (g. 33);

PUSH

9. Close the infuser door;

10. Put the water tank back.

15.7 Cleaning the coee spouts

1. Clean the coee spouts (A8) regularly with a sponge or cloth (g. 28A);

2. Check that the holes in the coee spouts are not blocked. If necessary, remove coee deposits with a toothpick (g. 28B).

Page 20

15.10 Cleaning the milk container

To keep the frother ecient, clean the milk container (D) every two days as described below:

1. Remove the lid (D2);

2. Remove the milk spout (D5) and intake tube (D4) (g. 34);

3. Turn the froth adjustment dial (D1) anticlockwise to the “INSERT” position (g. 34) and pull it o upwards;

4. Wash all the components thoroughly with hot water and mild washing-up liquid. All components are dishwasher safe, placing them in the top basket of the dishwasher.

Make sure there are no milk residues on the hollow and

groove under the dial (g. 35). If necessary, scrape the groove with a toothpick;

15.11 Cleaning the hot water/steam connection nozzle

Each time you prepare milk, clean the connection nozzle (A9) with a sponge to remove milk residues from the gaskets (g. 22).

16. DESCALING

Important!

• Before use, read the instructions and the labelling on the

descaler pack.

• You should use De’Longhi descaler only. Using unsuitable

descaler and/or performing descaling incorrectly may result in faults not covered by the manufacturer’s guarantee.

Descale the appliance when “DESCALING NEEDED PRESS OK TO START (~40min) the appliance immediately, press “OK ” and follow the instructions from point 4. To descale the appliance later, press “ ESC”. The symbol appears on the display to remind you that the appliance needs descaling. To access the descaling menu:

1. Press the selection arrow (B2) corresponding to the “

symbol (B8) to enter the menu;

2. Press the selection arrow corresponding to “DESCALE ”;

” appears on the display (B). To descale

3. “REMOVE WATER SOFTENER FILTER” (g. 37): extract the water tank (A16), remove the water softener lter (C4) (if present) and empty the water tank. Press the selection arrow corresponding to “NEXT>”;

”

35 36

5. Rinse inside the froth adjustment dial seat with running water (g. 36);

6. Check that the intake tube and spout are not clogged with milk residues;

7. Replace the dial (in correspondence to the word “INSERT”), spout and milk intake tube;

8. Place the lid back on the milk container (D3).

4. “ADD DE’LONGHI DES-

CALER (LEVEL A) AND WATER (UP TO LEVEL B)” (g. 38). Pour the descaler into the tank up to the level A marked inside the tank (equal to one 100 ml pack), then add water (one litre) up to level B and put the water tank back. Press the selection

Page 21

arrow corresponding to “NEXT>”;

Important! Danger of burns

Hot water containing acid ows from the hot water/steam and coee spouts. Take care to avoid contact with splashes of this solution.

7. Press “OK ” to conrm that you have added the descaling solution. “DESCALING UNDERWAY” appears on the display (B1). The descale programme starts and the descaler liquid comes out of the hot water/steam and coee spouts. A series of rinses and pauses is performed automatically to remove all the scale residues inside the coee machine;

After about 25 minutes, descaling stops;

8. “RINSE AND FILL WATER TANK UP TO MAX LEVEL” (g. 5): the appliance is now ready to rinse with fresh water. Empty the container used to collect the descaler solution. Extract the water tank, empty, rinse under running water, ll with fresh water up to the MAX level and put back in the appliance;

9. “PLACE 2l CONTAINER UNDER SPOUTS PRESS OK TO START RINSING”: Place the container used to collect the descaler solution empty under the coee spouts and hot water/ steam spout (g. 8) and press the selection arrow corresponding to “OK “;

10 Hot water is delivered rst from the coee spouts, then

from the hot water/steam spout and “RINSING UNDERWAY” is displayed;

11. When the water in the tank has run out, empty the container used to collect the rinsing water;

5. “EMPTY DRIP TRAY” (g.

47): Remove, empty and replace the drip tray (A14) and grounds container (A10). Press the selection arrow corresponding to “NEXT>”;

6. “POSITION 2l CONTAINER OK TO START”. Place an

empty container with a minimum capacity of 2 litres under the hot water/steam spout (C6) and coee spouts (A8) (g. 8);

“PLACE 2l CONTAINER UNDER SPOUTS PRESS OK TO START

15. RINSING”: Place the container used to collect the descaler solution empty under the hot water/steam spout (g. 8) and press “OK ” ;

16. Hot water is delivered from the hot water/steam spout and “RINSING UNDERWAY” is displayed;

17. “EMPTY DRIP TRAY” (g. 39): At the end of the second rinse, remove, empty and replace the drip tray (A14) and grounds container (A10). Press “NEXT>”;

18. “DESCALE COMPLETE”: press “OK “;

19. “FILL TANK WITH FRESH WATER”: empty the container used to collect the rinse water, remove the water tank and ll with fresh water up to the MAX level, then put back in the appliance.

Descaling is complete.

Please note!

• If the descaling cycle is not completed correctly (e.g. no electricity) we recommend repeating the cycle;

• After descaling, it is normal for the grounds container (A10) to contain water.

17. SETTING WATER HARDNESS

The “DESCALE” message is displayed after a period of time established according to water hardness. The machine is set by default for a hardness of “LEVEL 4”. The machine can also be programmed according to the hardness of the mains water in the various regions so that the machine needs to be descaled less often.

12. “INSERT FILTER INTO ITS HOUSING” (g. 48). Press “NEXT>” and extract the water tank. Replace the water softener lter if removed previously;

13. “RINSE AND FILL WATER TANK UP TO MAX LEVEL” (g. 5): Fill the tank up to the MAX level with fresh water;

14. “INSERT WATER TANK” (g.

6): Put the water tank back in the appliance;

17.1 Measuring water hardness

1. Remove the “TOTAL HARDNESS TEST” indicator paper (C1) from its pack (attached to the English instructions).

2. Immerse the paper completely in a glass of water for one second.

Page 22

3. Remove the paper from the water and shake lightly. After about a minute, 1, 2, 3, or 4 red squares form, depending on the hardness of the water. Each square corresponds to one level.

soft water

slightly hard water

hard water

very hard water

17.2 Setting water hardness

1. Press the selection arrow (B2) corresponding to the “ ” symbol (B8) to enter the menu;

2. Scroll through the menu items by pressing the selection

arrow corresponding to “NEXT>” until “ WATER HARDNESS” appears on the display;

3. Press the selection arrow corresponding to “ WATER HARDNESS”;

4. Press the selection arrow corresponding to the required level (Level 1 = soft water; Level 4 = very hard water);

4. Press “ ESC” to go back to the homepage.

The machine is now reprogrammed with the new water hardness setting.

18. WATER SOFTENER FILTER

Certain models are tted with a water softener lter (C4). If this is not the case with your model, you are recommended to purchase one from De’Longhi Customer Services. To use the lter correctly, follow the instructions below.

18.1 Installing the lter

1. Remove the lter (C4) from the packaging;

2. Press the selection arrow (B2) corresponding to the “ symbol (B8) to enter the menu;

3. Press the selection arrow corresponding to “ HARDNESS”;

WATER

4. TURN DATE INDICATOR TO NEXT 2 MONTHS” (g. 41): turn the date disk to display the next two months of use. Press the selection arrow corresponding to “NEXT>”;

Please note

The lter lasts about two months if the appliance is

last a maximum of three weeks.

6. Extract the tank (A16) from the appliance and ll with water.

”

used normally. If the coee machine is left unused with the lter installed, it will

5. “RUN WATER INTO FILTER HOLE UNTIL IT COMES OUT” (g. 42): To activate the lter, run tap water through the hole in the lter as shown in the gure until water comes out of the openings at the side for more than a minute. Press the selection arrow corresponding to

“NEXT>”;

7. “IMMERSE FILTER TO EXPEL AIR BUBBLES” (g.

43): Insert the lter in the water tank and immerse it completely for about ten seconds, sloping it and pressing it lightly to enable the air bubbles to escape. Press the selection arrow corresponding to “NEXT>”;

8. “INSERT FILTER INTO ITS HOUSING”: Insert the lter in the lter housing (A17-g. 40) and press as far as it will go. Press the selection arrow corresponding to “NEXT>”;

9. “INSERT WATER TANK”: Close the tank with the lid (A15), then put the tank back in the machine (g. 6);

10.

“POSITION 0.5L CONTAINER, PRESS OK” (g. 8): Place the container under the hot water spout (C6) and press “OK ”. Delivery begins and stops automatically.

Page 23

The lter is now active and you can use the coee machine.

18.2 Replacing the lter

Replace the lter (C4) when “REPLACE WATER SOFTENER FILTER, PRESS OK TO START

”appears on the display (B). To replace the lter immediately, press “OK ” and follow the instructions from point 4. To replace the lter later, press the selection arrow correspond-

ing to “

ESC”. The symbol appears on the display to

remind you that the lter needs replacing.

1. Extract the tank (A16) and exhausted lter;

2. Remove the new lter from the packaging;

3. Press the selection arrow (B2) corresponding to the “

symbol (B8) to enter the menu;

4. Press the selection arrow corresponding to “

REPLACE

WATER FILTER”;

5. Follow the operations described in the previous section

from point 5.

The lter is now active and you can use the coee machine.

Please note!

After two months (see date indicator) or when the appliance has not been used for 3 weeks, you should replace the lter even if

19. TECHNICAL DATA

Voltage: 220-240 V~ 50/60 Hz max. 10 A Power: 1450 W Pressure: 1,5 MPa (15 bar) Water tank capacity: 2 l Size LxDxH: 260x480x375 mm Cord length: 1750 mm Weight: 11,9 kg Beans container capacity: 400 g

The appliance complies with the following EC directives:

• European Standby Regulation 1275/2008

”

• Materials and accessories coming into contact with food conform to EEC regulation 1935/2004.

20. DISPOSAL

The appliance must not be disposed of with household waste, but taken to an authorised waste separation and recycling centre.

the message has not yet been displayed.

18.3 Removing the lter

Replace the lter (C4) when “REPLACE WATER SOFTENER FILTER, PRESS OK TO START place the lter immediately, proceed as follows:

1. Extract the tank (A16) and exhausted lter;

2. Press the selection arrow (B2) corresponding to the “ symbol (B8) to enter the menu;

3. Press the selection arrow corresponding to “REMOVE

WATER FILTER

4. “

CONFIRM FILTER REMOVAL”: to conrm press the selection arrow corresponding to “OK ” settings menu, press the selection arrow corresponding to “ ESC”)

;

” appears on the display (B). To re-

”

”;

(to go back to the

5. “

After two months (see date indicator) or when the appliance has not been used for 3 weeks, you should replace the lter even if

REMOVE FILTER COMPLETED”: the change has

been saved. Press

“OK ”

to go back to the homepage.

Please note!

the message has not yet been displayed.

Page 24

21. DISPLAYED MESSAGES

DISPLAYED MESSAGE POSSIBLE CAUSE SOLUTION

FILL TANK WITH FRESH WATER

INSERT WATER TANK

EMPTY GROUNDS CONTAINER

INSERT GROUNDS CONTAINER

Insucient water in the tank (A16). Fill the tank with water and/or insert it cor-

rectly, pushing it as far as it will go until it clicks into place.

The tank (A16) is not correctly in place. Insert the tank correctly and press as far as it

will go.

The grounds container (A10) is full.

After cleaning, the grounds container has not been replaced (A10).

Empty the grounds container and drip tray (A14), clean and replace. Important: when removing the drip tray, the grounds container must be emptied, even if it contains few grounds. If this is not done, when you make the next coees, the grounds container may ll up more than expected and clog the machine.

Remove the drip tray (A14) and insert the grounds container.

ADD GROUND COFFEE MAX. ONE MEASURE

ESC

The pre-ground coee function has been selected without placing any “pre-ground coee” in the funnel (A4).

Place pre-ground coee in the funnel (g. 13) and repeat delivery.

Page 25

ADD GROUND COFFEE MAX. ONE MEASURE

FILL BEANS CONTAINER

ESC

GROUND TOO FINE. ADJUST MILL

ESC

SELECT A MILDER TASTE OR

REDUCE COFFEE AMOUNT

A LONG coee with pre-ground coee has been requested

The coee beans have run out. Fill the beans container (A3-g. 11).

The pre-ground coee funnel (A4) is clogged. Empty the funnel with the help of the brush

The grinding is too ne and the coee is delivered too slowly or not at all.

If the water softener lter (C4) is present, an air bubble may have been released inside the circuit, obstructing delivery.

Too much coee has been used. Select a milder taste by pressing “AROMA” (B5)

Place pre-ground coee in the funnel (A4) (g.

13) and press “OK ” to continue and complete delivery.

(C5) as described in section “15.8 Cleaning the pre-ground coee funnel”.

Repeat coee delivery and turn the grinding adjustment dial (A5) (g. 13) one click clockwise towards “7” while the coee mill is in operation. If after making at least 2 coees delivery is still too slow, repeat the correction procedure, turning the grinding adjustment dial another click until delivery is correct (see section “9.3 Adjusting the coee mill”). If the problem persists, make sure the water tank (A16) is fully inserted.

Insert the hot water/steam spout (C6) in the appliance and deliver a little water until the ow becomes regular.

or reduce the quantity of pre-ground coee (maximum 1 measure).

ESC

Page 26

INSERT WATER SPOUT The hot water spout (C6) is not inserted or is

inserted incorrectly

Insert the water spout as far as it will go.

INSERT MILK CONTAINER

INSERT INFUSER ASSEMBLY

PUSH

WATER CIRCUIT EMPTY PRESS OK TO START

PRESS OK TO CLEAN OR TURN DIAL

The milk container (D) is not inserted correctly. Inser t the milk container as far as it will go (g.

18).

The infuser (A19) has not been replaced after cleaning.

The water circuit is empty

The milk container has been inserted with the froth adjustment dial (D1) in the “CLEAN” position.

Insert the infuser as described in section “16.9 Cleaning the infuser”.

Press

“OK ” to deliver water from the spout (C6) until it ows out normally. If the problem persists, make sure the water tank (A16) is fully inserted.

To proceed with the CLEAN function press ”, or turn the froth adjustment dial to one of the milk positions.

“OK

Page 27

TURN MILK FROTH ADJUSTMENT DIAL TO CLEAN POSITION

CLEAN

ESC

TURN THE MILK FROTH ADJUSTMENT DIAL

Milk has been delivered recently and the tubes inside the milk container (D) must be cleaned.

The milk container has been inserted with the froth adjustment dial (D1) in the “CLEAN” position.

Turn the froth adjustment dial (D1) to CLEAN (g. 20).

Turn the dial to the required froth position.

DESCALING NEEDED PRESS OK TO START ~40MIN

ESC OK

REPLACE WATER SOFTENER FILTER PRESS OK TO START

ESC OK

GENERIC ALARM. REFER TO USER MANUAL / APP

The machine must be descaled.

The water softener lter (C4) is exhausted. Press OK to replace or remove the lter, or ESC

The inside of the appliance is very dirty. Clean the inside of the appliance thoroughly,

The appliance needs descaling and/or the lter (C4) must be replaced.

The tubes inside the milk container (C) must be cleaned.

The lter (C4) must be replaced. Replace the lter or remove it as described in

OK ” to start descaling or “ ESC” to

Press “ descale later. The descaling procedure described in section “16. Descaling” needs to be per formed as soon as possible.

to carry out the procedure later. Follow the instructions in section “18. Water softener lter”.

as described in the section “15. Cleaning”. If the message is still displayed after cleaning, contact a service centre.

The descaling procedure described in section “16. Descaling” and/or replace or remove the lter as described in section “18. Water softener lter”.

Turn the froth adjustment dial (D1) to CLEAN (g. 20).

section “18. Water softener lter”.

Page 28

The machine must be descaled. The descaling procedure described in section

“16. Descaling” needs to be performed as soon as possible.

The auto-start function is enabled. To disable the function, proceed as described in

CLEANING UNDERWAY PLEASE WAIT

section “8.6 Auto-start

Energy saving is enabled. To disable the function, proceed as described in

section “8.9 Energy saving

The appliance is connected to a device via bluetooth.

The appliance has detected impurities in its internal circuits.

Wait for the appliance to be ready for use again and reselect the required beverage. Contact Customer Services if the problem persists.

”.

22. TROUBLESHOOTING

Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact Customer Services.

PROBLEM POSSIBLE CAUSE SOLUTION

The coee is not hot. The cups were not preheated. Warm the cups by rinsing them with hot

water (Please note: you can use the hot water function).

The coee is weak or not creamy enough.

The coee is delivered too slowly or a drop at a time.

The infuser has cooled down because 2/3 minutes have elapsed since the last coee was made.

A low coee temperature is set.

The coee is ground too coarsely. Turn the grinding adjustment dial (A5) one

The coee is unsuitable. Use pre-ground coee for espresso machines.

The coee is ground too nely. Turn the grinding adjustment dial (A5) one

Before making the coee, heat the infuser by rinsing using the rinse function (see section “8.1 Rinsing

Set a higher coee temperature in the menu

(section “8.10 Coee temperature

click anticlockwise towards “1” while the coffee mill is in operation (g. 10). Continue one click at a time until coee delivery is satisfactory. The eect is only visible after delivering 2 coees (see section “9.3 Adjusting the coee mill”).

click clockwise towards “7” while the coee mill is in operation (g. 10). Continue one click at a time until coee delivery is satisfactory. The eect is only visible after delivering 2 coees (see section “9.3 Adjusting the coee mill”).

”).

” ).

Page 29

Coee does not come out of one or both of the spouts.

The appliance does not come on The power cord (C8) connector is not

The coee spouts (A8) are blocked. Clean the spouts with a toothpick (g. 36B).

inserted correctly.

It is not plugged into the mains socket. Plug into the mains socket (g. 1).

The main switch (A21) is not turned on. Press the main switch (g. 2).

Insert the connector as far as it will go in the socket at the back of the appliance (g. 1).

The infuser cannot be extracted The appliance has not been turned o

correctly

At the end of descaling, the appliance requests a third rinse

The milk does not come out of the milk spout (D5)

The milk contains large bubbles and squirts out of the milk spout (D5) or there is little froth

During the two rinse cycles, the water tank has not been lled to the MAX level

The lid (D2) of the milk container lid (D) is dirty

The milk is not cold enough or is not semi-skimmed.

The froth adjustment dial (D1) is incorrectly adjusted.

The milk container lid (D2) or froth adjustment dial (D1) are dirty

The hot water/steam connection nozzle (A9) is dirty

Turn the appliance o by pressing the button (A7) (section “7. Turning the appliance o”).

Follow the instructions displayed by the appliance, but rst empty the drip tray to avoid the water overowing.

Clean the milk container lid as described in section “15.10 Cleaning the milk container”.

Use skimmed or semi-skimmed milk at refrigerator temperature (about 5° C). If the result is not as you wished, try changing brand of milk.

Adjust following the instructions in section "10. Making cappuccinos and milk-based coees".

Clean the milk container lid and control knob as described in section "15.10 Cleaning the milk container".

Clean the connection nozzle as described in section "15.11 Cleaning the hot water/steam connection nozzle".

Page 30

23. ELECTRICAL CONNECTION UK ONLY

Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you are in any doubt about your supply contact your local electricity company. The exible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity. Should this plug not t the socket outlets in your home, it should be cut o and replaced with a suitable plug, following the procedure outlined below. Note: Such a plug cannot be used for any other appliance and should therefore be properly disposed of and not left where children might nd it and plug it into a supply socket - with the obvious consequent danger.

Please note: We recommend the use of good quality plugs and wall sockets that can be switched o when the machine is not in use. IMPORTANT: The wires in the mains lead tted to this appliance are coloured in accordance with the following code:

Green and Yellow to Earth

GREEN AND YELLOW EARTH

13 amp Fuse

BLUE NEUTRAL BROWN LIVE

Blue to neutral

Brown to live

Cord Clamp

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

- The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol or coloured green or green and yellow.

- The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

- The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

When wiring the plug, ensure that all strands of wire are securely retained in each terminal. Do not forget to tighten the mains lead clamp on the plug. If your electricity supply point has only two pin socket outlets, or if you are in doubt, consult a qualied electrician. Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualied electrician and should only be replaced with a exible cord of the same size. After replacement of a fuse in the plug, the fuse cover must be retted. If the fuse cover is lost, the plug must not be used until a replacement cover is obtained. The colour of the correct replacement fuse cover is that of the coloured insert in the base of the fuse recess or elsewhere on the plug. Always state this colour when ordering a replacement fuse cover. Only 13amp replacement fuses which are asta approved to B.S. 1362 should be tted. This appliance conforms to the Norms EN 55014 regarding the suppression of radio interference.

Warning - this appliance must be earthed