Delonghi ECAM45760S Instruction manuals

Download

Page 1

ECAM45.76X

COFFEE MAKER

Instructions for use. Keep these instructions

Visit www.delonghiregistration.com to register

your product

Visit www.delonghi.com for a list of service centers

near you.

ELECTRIC CHARACTERISTICS

120 V~ 60 H z 1250 W

MACHINE À CAFÉ

Mode d’emploi . Conservez cette notice

Visitez www.delonghiregistration.com pour

enregistrer votre produit en ligne.

Visitez www.delonghi.com pour y voir une liste des

centres de réparation proches de chez vous.

CARACTÉRISTIQUES ÉLECTRIQUES

120 V~ 60 H z 1250 W

CAFETERA

Repase y guarde estas instrucciones.

Lea cuidadosamente este instructivo antes de usar

su aparato.

Visite www.delonghiregistration.compara registrar

su producto en línea.

Visite www.delonghi.com para ver la lista de

centros de servicios cercanos a usted.

CARACTERISTICAS ELECTRICAS:

120 V~ 60 H z 1250 W

Page 2

page 6 page 25 pàg. 46

C D

B15 B13

B14 B11B12

B3 B4 B5 B6 B7 B8 B9

B10

Page 3

A19

A15

A14

A10

A18

A13

A11

A12

A17

A16

Page 4

1 2

100 ml

9 11

14 15 16

7 8

Page 5

MILK

23 24

26 27

28A 28B

31 3230

Page 6

CONTENTS

1. IMPORTANT SAFEGUARDS ..........................7

1.1 Short cord instructions .................................7

2. INTRODUCTION ..........................................8

2.1 Symbols used in these instructions ...............8

2.2 Letters in brackets .........................................8

2.3 Troubleshooting and repairs ..........................8

2.4 Video instruction manual available on: ........8

3. DESCRIPTION.............................................8

3.1 Description of the appliance ..........................8

3.2 Description of the control panel ....................8

3.3 Description of the accessories ........................9

3.4 Description of the milk container ..................9

4. BEFORE USE...............................................9

4.1 Checking the appliance .................................9

4.2 Installing the appliance .................................9

4.3 Connecting the appliance ..............................9

4.4 Setting up the appliance ...............................9

5. TURNING THE APPLIANCE ON....................10

6. TURNING THE APPLIANCE OFF .................. 10

7. MENU SETTINGS ...................................... 10

7.1 Rinsing ........................................................10

7.2 Descaling ....................................................10

7.3 Install lter..................................................10

7.4 Replacing the water softener lter (if

installed) .....................................................10

7.5 Adjust time .................................................10

7.6 Auto-start ...................................................11

7.7 Auto-o (standby) ......................................11

7.8 Cup warmer.................................................11

7.9 Energy saving ..............................................11

7.10 Setting the temperature .............................11

7.11 Setting water hardness ...............................11

7.12 Setting the language ..................................12

7.13 Beep ............................................................12

7.14 Default values (reset) ..................................12

7.15 Statistics function........................................12

8. MAKING COFFEE ....................................... 12

8.1 Selecting the coee taste ............................12

8.2 Selecting the quantity of coee in the cup ..12

8.3 Customising the “my coee” quantity ..........12

8.4 Adjusting the coee mill .............................13

8.5 Tips for a hotter coee.................................13

8.6 Making coee using coee beans ...............13

8.7 Making coee using pre-ground coee .......13

8.8 Making LONG coee using coee beans ......13

8.9 Making LONG coee using pre-ground coee .

..................................................................14

8.10 Customising the LONG coee quantity ........14

9. MAKING CAPPUCCINOS AND MILKBASED

COFFEES .................................................. 14

9.1 Filling and attaching the milk container ......14

9.2 Adjusting the amount of froth .....................14

9.3 Making cappuccinos and milk-based coees

automatically .............................................. 14

9.4 Preparing “MILK MENU” drinks ....................15

9.5 Cleaning the milk container after every use 15

9.6 Programming the quantity of coee and milk in the cup for the CAPPUCCINO, CAFFELATTE

and LATTE MACCHIATO buttons ...................15

9.7 Programming the quantity of coee and milk

in the cup for MILK MENU drinks .................15

10. DELIVERING HOT WATER AND STEAM ........ 16

10.1 Hot water .................................................... 16

10.2 Changing the quantity of water delivered

automatically .............................................. 16

10.3 Steam delivery ............................................16

10.4

Tips for using steam to froth milk ................16

10.5 Cleaning the spout after use........................16

11. CLEANING................................................ 17

11.1 Cleaning the machine .................................17

11.2 Cleaning the machine’s internal circuit ........17

11.3 Cleaning the coee grounds container ........17

11.4 Cleaning the drip tray and condensate tray .17

11.5 Cleaning the inside of the coee machine ...17

11.6 Cleaning the water tank ..............................18

11.7 Cleaning the coee spouts ..........................18

11.8 Cleaning the pre-ground coee funnel .......18

11.9 Cleaning the infuser ....................................18

11.10 Cleaning the milk container ........................19

11.11 Cleaning the hot water/steam connection

nozzle..........................................................19

12. DESCALING .............................................. 19

13. SETTING WATER HARDNESS ......................20

13.1 Measuring water hardness ..........................20

13.2 Setting water hardness ...............................20

14. WATER SOFTENER FILTER ......................... 20

14.1 Installing the lter ......................................20

14.2 Replacing the lter ......................................21

14.3 Removing the lter .....................................21

15. TECHNICAL DATA ...................................... 21

16. DISPLAYED MESSAGES ..............................22

17. TROUBLESHOOTING ................................. 23

Page 7

1. IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following.

• Read all instructions carefully.

• Make sure the voltage of your electrical system corresponds to the voltage shown on the bottom of the machine.

• Do not touch hot surfaces. Use handles or knobs.

• To protect against re, electrical shock and personal injury, do not immerse cord, plug or appliance in water or other liquid.

• Keep the appliance out of the reach of children and do not leave appliance unattended while in operation.

• Unplug from the outlet when not in use and before cleaning.

• Do not operate with a damaged cord or plug, or after the appliance malfunctions, or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair or adjustment.

• The use of accessory attachments not recommended by the manufacturer may result in re, electrical shock, or personal injury.

• Do not use outdoors.

• Make sure the power cord does not hang over the edge of the table or counter-top to avoid getting accidentally caught or entangled.

•

Do not place the appliance or its electrical parts on or near electric stoves, cooking surfaces, or gas burners.

• Plug cord into the wall outlet. To disconnect, rst turn machine “o”, then remove plug from wall outlet.

• Do not use the appliance for other than the intended use. This appliance is to be utilized for domestic use only. The manufacturer declines all responsibility for any damage caused by improper, incorrect, or

irresponsible use.

WARNING: To reduce the risk of re or electric shock, do not remove the cover or the exterior of the unit. Don’t attempt to repair or modify the machine, doing so will void the warranty. Repair should be done by authorized service personnel only!

SAVE THESE INSTRUCTIONS

THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY

1.1 Short cord instructions

- A short power cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.

- Longer, detachable power supply cords or extension cords are available and may be used if care is exercised in their use.

- If an extension cord is used, the marked electrical rating should be at least as great as the electrical rating of the appliance. If the appliance is provided with 3- wire, grounding type cord, the extension should be a GROUNDING TYPE 3 - WIRE CORD. The longer cord should be arranged so that it will not drape over the counter-top or table top where it can be pulled on by children or tripped over.

- Your product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will t into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to t, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

Page 8

2. INTRODUCTION

Thank you for choosing the ECAM45760 automatic coee and cappuccino maker. We hope you enjoy using your new appliance. Take a few minutes to read these instructions. This will avoid all risks and damage to the machine.

2.1 Symbols used in these instructions

Important warnings are identied by these symbols. It is vitally important to observe these warnings.

Danger!

Failure to observe the warning could result in life threatening injury from electric shock.

Important!

Failure to observe the warning could result in injury or damage to the appliance.

Danger of burns!

Failure to observe the warning could result in scalds.

Please note:

This symbol identies important advice or information for the user.

2.2 Letters in brackets

The letters in brackets refer to the legend in the Description of the Appliance on page 3.

2.3 Troubleshooting and repairs

In the event of problems, rst try and resolve them following the information given in the section “16. DISPLAYED MESSAGES” and “17. TROUBLESHOOTING”. If this does not resolve the problem or you require further information, you should consult Customer Experience by calling the number given on the annexed “Customer Experience” sheet. If your country is not among those listed on the sheet, call the number given in the guarantee. If repairs are required, contact De’Longhi Customer Experience only. Contact details are given in the guarantee certicate provided with the appliance.

2.4 Video instruction manual available on:

http://ecam45760.delonghi.com

3. DESCRIPTION

3.1 Description of the appliance

(page 3 - A ) A1. Beans container lid A2. Pre-ground coee funnel lid A3. Beans container A4. Pre-ground coee funnel A5. Grinding adjustment dial A6. Cup warmer shelf A7. Coee spout (adjustable height) A8. Hot water and steam connection nozzle A9. Condensate tray A10. Coee grounds container A11. Cup tray A12. Drip tray A13. Drip tray water level indicator A14. Infuser door A15. Infuser A16. Water tank A17. Water softener lter housing A18. Water tank lid A19. Main switch

3.2 Description of the control panel

(page 2 - B )

A number of buttons on the panel have a double function. This is indicated in brackets in the description.

B1. button: turns the appliance on and o (standby) B2. aroma selection button: to select the coee taste B3. CAPPUCCINO button: to deliver a cappuccino B4. CAFFELATTE button: to deliver a caelatte (When in the

settings menu, press to scroll through the menu)

LAT TE MACCHIATO button: to deliver a macchiato

B5. B6. MILK MENU button: to access preparation of MILK, FLAT

WHITE, ESPRESSO MACCHIATO and MY MILK B7. button to deliver hot water B8. button: to deliver steam (When in the settings menu,

press to scroll through the menu)

B9. button: to make 1 cup of LONG coee B10. button: to make 2 cups of coee with the settings

displayed B11. button: to make 1 cup of coee with the settings

displayed B12. OK button: to enable and conrm the selected function B13. Display: guides the user in using the appliance B14. MENU/ESC button to enter the menu (When in the settings

menu, press to exit the menu)

B15. button: to select coee quantity

Page 9

3.3 Description of the accessories

(page 2 - C ) C1. “Total Hardness Test” indicator paper C2. Pre-ground coee measure C3. Descaler C4. Water softener lter (certain models only) C5. Cleaning brush C6. Cappuccino maker/hot water spout C7. Cappuccino maker/hot water spout release button

3.4 Description of the milk container

(page 2 - D ) D1. Froth adjustment and CLEAN dial D2. Milk container lid D3. Milk container D4. Milk intake tube D5. Frothed milk spout (adjustable)

If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualied electrician.

4.4 Setting up the appliance

Please note!

• Coee has been used to factory test the appliance and it is

therefore completely normal for there to be traces of cof-

fee in the mill. The machine is, however, guaranteed to be

new.

• The appliance is set with ENGLISH language: if you want to

change the language, please see paragraph “7.12 Setting

the language”.

• You should customise water hardness as soon as possible

following the instructions in section “13. SETTING WATER

HARDNESS”.

4. BEFORE USE

4.1 Checking the appliance

After removing the packaging, make sure the product is complete and undamaged and that all accessories are present. Do not use the appliance if it is visibly damaged. Contact De’Longhi Customer Services.

4.2 Installing the appliance

Important!

When you install the appliance, you should respect the following safety warnings:

• The appliance gives o heat. After positioning the appliance on the worktop, leave a space of at least 3 cm between the surfaces of the appliance and the side and rear walls and at least 15 cm above the coee maker.

• Water penetrating the coee maker could cause damage. Do not place the appliance near taps or sinks.

• The appliance could be damaged if the water it contains freezes. Do not install the appliance in a room where the temperature could drop below freezing point.

• Arrange the power cord in such a way that it cannot be damaged by sharp edges or contact with hot surfaces (e.g. electric hot plates).

4.3 Connecting the appliance

Important!

Check that the mains power supply voltage corresponds to that indicated on the rating plate on the bottom of the appliance. Connect the appliance to an eciently earthed and correctly installed socket with a minimum current rating of 10A only.

1. Connect the appliance to the mains electricity supply (g.

1) and make sure the main switch (A19) at the back of the appliance is pressed down (g. 2).

2. Remove the water tank (A16- g. 3), open the lid (A18- g.

4), ll to the MAX line with fresh water (g. 5), replace the lid and put the tank back in the appliance.

Follow the instructions indicated on the appliance display:

3. “INSERT WATER SPOUT”: Check that the hot water spout (C6) is inserted on the connection nozzle (A8) and place a container holding a minimum of 33,38 .oz/100 ml underneath (g. 7).

4. “HOT WATER Press OK” is displayed;

5. Press the OK button (B12) to conrm (g. 10). The appliance delivers water from the spout then goes o automatically.

The coee machine is now ready for normal use.

Please note!

• When setting up the appliance, you need to make 4-5 cups of coee or 4-5 cappuccinos before the appliance starts to give satisfactory results.

• When making the rst 5-6 cappuccinos, it is normal to hear the noise of boiling water. After this, the noise becomes less.

• To enjoy your coee even more and improve the performance of your appliance, we recommend installing a water softener lter (C4) as described in section “14. WATER SOFTENER FILTER”. If your model is not provided with a lter, you can request one from De’Longhi Customer Services.

Page 10

5. TURNING THE APPLIANCE ON

Please note!

Before turning the appliance on, make sure the main switch (A19) is pressed (g. 2). Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted. The appliance is ready for use only after completion of this cycle.

Danger of burns!

During rinsing, a little hot water comes out of the coee spouts (A7) and is collected in the drip tray (A12) underneath. Avoid contact with splashes of water.

• To turn the appliance on, press the button (B1-g.

8). The message “Heating up, Please wait” appears on the

display (B13). When heating is complete, the message changes to “RINSING”. As well as heating the boiler, this also heats the internal circuits by circulating hot water. The appliance is at temperature when the message indicating the taste and quantity of coee appears.

6. TURNING THE APPLIANCE OFF

Whenever the coee machine is turned o after being used to make coee, it performs an automatic rinse cycle.

Danger of burns!

During rinsing, a little hot water ows from the coee spouts (A7). Avoid contact with splashes of water.

• To turn the appliance o, press the button (B1- g.

8).

• The message “Turning o underway Please wait” appears

on the display (B13), then, if necessary, the appliance per-

forms a rinse cycle and goes o (standby).

Please note!

If you will not be using the appliance for some time, unplug from the mains socket:

• rst turn the appliance o by pressing the button;

• release the main switch (A19) at the back of the appliance

(g. 2).

Important!

Never press the main switch while the appliance is on.

7. MENU SETTINGS

7.1 Rinsing

Use this function to deliver hot water from the coee spout (A7) and from the cappuccino maker/hot water spout (C6), if inserted, to clean and heat the appliance’s internal circuit. Place a container with a minimum capacity of 33,38 .oz/100 ml under the cappuccino maker/hot water spout (g. 7).

To enable the function, proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Rinsing” appears on the display (B13);

3. Press the OK button (B12-g. 10): the message “Conrm?” is displayed;

Danger of burns!

Do not leave the appliance unattended while hot water is being delivered.

4. Press the OK button. “RINSING Please wait” is displayed;

5. After a few seconds, hot water is delivered rst from the coee spouts (A7), then from the cappuccino maker/hot water spout (C6) (if inserted) to heat the appliance’s internal circuit. “RINSING” is displayed, together with a progress bar which lls gradually as preparation proceeds;

6. To stop the process press any button or wait for delivery of water to stop automatically.

Please note!

• If the appliance is not used for more than 3-4 days, when switched on again, we strongly recommend performing 2/3 rinses before use;

• After cleaning, it is normal for the grounds container (A10) to contain water.

7.2 Descaling

For instructions on descaling, see section “12. DESCALING”.

7.3 Install lter

For instructions on how to install the lter, see section “14. WATER SOFTENER FILTER”.

7.4 Replacing the water softener lter (if

installed)

For instructions on how to replace the lter, see section “14.2 Replacing the lter”.

7.5 Adjust time

To adjust the time on the display (B13), proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Adjust time” is displayed;

3. Press the OK button (B12-g. 10): the hours ash on the display;

4. Press < or > to change the hour;

5. Press the OK button to conrm. The minutes ash;

6. Press < or > to change the minutes;

7. Press the OK button to conrm.

The time is set. Press the MENU/ESC button to exit the menu.

Page 11

7.6 Auto-start

You can set the auto-start time in order to have the appliance ready at a certain time (for example in the morning) so you can make coee immediately.

Please note!

To enable this function, the time must already be set correctly.

To enable auto-start, proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Auto-start” appears on the display (B13);

3. Press the OK button (B12- g. 10). “Enable?” is displayed;

4. Press the OK button to conrm;

5. Press < or > to choose the hour;

6. Press the OK button to conrm;

7. Press < or > to change the minutes;

8. Press the OK button to conrm;

9. Press the MENU/ESC button to exit the menu.

Once the time has been conrmed, activation of auto-start is indicated by the To disable the function:

1. Select auto-start from the menu;

2. Press the OK button. “Disable?” is displayed;

3. Press the OK button to conrm.

symbol is no longer displayed.

The

symbol displayed alongside the time.

7.7 Auto-o (standby)

Auto-o can be set so that the appliance goes o after 15 or 30 minutes, or 1, 2 or 3 hours. To programme Auto-o, proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Auto-start” appears on the display (B13);

3. Press the OK button (B12- g. 10);

4. Press < or > until the required operating time (15 or 30 minutes, or 1, 2 or 3 hours) is displayed;

5. Press the OK button to conrm;

6. Press the MENU/ESC button to exit the menu.

Auto-o is now programmed.

7.8 Cup warmer

This function enables the cup warmer to be enabled or disabled. Proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Cup warmer” appears on the display (B13);

3. Press the OK button (B12- g. 10). “Enable?” or “Disable?” is displayed;

4. Press the OK button to enable or disable the cup warmer (the message “Cup warmer Enabled” indicates that it is active);

5. Press the MENU/ESC button to exit the menu.

Warming the cups keeps the coee hot.

7.9 Energy saving

Use this function to enable or disable energy saving. When enabled, the function reduces energy consumption in compliance with European regulations. To disable (or enable) energy saving, proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Energy Saving” appears on the display (B13);

3. Press the OK button (B12- g. 10). “Disable?” is displayed (or “Enable?” if the function has been disabled);

4. Press the OK button to disable (or enable) energy saving mode;

5. Press the MENU/ESC button to exit the menu.

When the function is active, if the machine is not used for some time, “Energy saving” is displayed.

Please note!

• When in energy saving mode, a few seconds elapse before the rst coee, cappuccino or milk based coee is delivered as the appliance must heat up again.

• To prepare any drink, press any button to exit energy saving, then press the button corresponding to the drink you want to make.

• If the milk container is inserted, “Energy saving” is not activated.

7.10 Setting the temperature

To modify the temperature of the water used to make the coee, proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Set temperature” appears on the display (B13);

3. Press the OK button (B12- g. 10);

4. Press < or > until the required temperature is displayed (●=low; ●●●●=maximum);

5. Press the OK button to conrm;

6. Press the MENU/ESC button to exit the menu.

7.11 Setting water hardness

For instructions on setting water hardness, see section “13.2 Setting water hardness”.

Page 12

7.12 Setting the language

To modify the language of the display (B13), proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Set language” is displayed;

3. Press the OK button (B12- g. 10);

4. Press < or > until the required language is displayed;

5. Press the OK button to conrm;

6. A message conrming the language installed is displayed;

7. Press the MENU/ESC button to exit the menu.

7.13 Beep

This enables or disables the beep emitted by the machine each time a button is pressed or an accessory is inserted/removed. To disable or re-enable the beep, proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Beep” appears on the display (B13);

3. Press the OK button (B12- g. 10): the message “Disable?” is displayed (or “Enable?” if the function has been disabled);

4. Press the OK button to enable or disable the beep;

5. Press the MENU/ESC button to exit the menu.

7.14 Default values (reset)

This resets all menu settings and programmed quantities back to the default values (with the exception of the language which remains as set). To reset the default values, proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Default values” appears on the display (B13);

3. Press the OK button (B12- g. 10);

4. The message “Conrm?” is now displayed

5. Press the OK button to conrm and exit.

7.15 Statistics function

This displays statistics relating to the machine. To display, proceed as follows:

1. Press the MENU/ESC button (B14) to enter the menu;

2. Press < (B4) or > (B8) (g. 9) until “Statistics” appears on the display (B13);

3. Press the OK button (B12- g. 10);

4. By pressing < or > you can check:

- how many coees have been made;

- the total number of cappuccinos and milk based coees;

- the total number of litres of water delivered;

- how many times the machine has been descaled;

- how many times the water softener lter has been replaced.

5. Press the MENU/ESC button twice to exit the menu.

8. MAKING COFFEE

8.1 Selecting the coee taste

The appliance is set by default to make coee with a standard taste. You can also choose one of these tastes: Extra mild taste Mild taste Standard taste Strong taste Extra-strong taste To change the taste, press the repeatedly until the required taste is displayed.

button (B2- g. 11)

8.2 Selecting the quantity of coee in the cup

The appliance is set by default to make a standard quantity of coee. To select the quantity of coee, press the button (B15- g. 12) until the message corresponding to the required quantity of coee is displayed:

Coee selected Quantity in cup

(.oz/ml)

MY COFFEE Programmable:

from ≃0,68/20 to

≃6,09/180

SHORT

STANDARD

LONG

EXTRA LONG

≃1,35/40 ≃2,03/60 ≃3,04/90

≃4,06/120

8.3 Customising the “my coee” quantity

The appliance is set by default to automatically deliver 30 ml of “MY COFFEE”. To modify this quantity, proceed as follows:

1. Place a cup under the coee spouts (A7-g. 13).

2. Press the is displayed.

3. Press and hold the sage “1 MY COFFEE Program quantity” is displayed. Then release the button;

4. As soon as the coee in the cup reaches the required level, press the button again.

The quantity of coee in the cup has now been programmed.

button (B15- g.12) until “MY COFFEE”

button (B11-g. 17) until the mes-

Page 13

8.4 Adjusting the coee mill

The coee mill is set by default to prepare coee correctly and should not require regulating initially. However, if after making the rst few coees you nd that the coee is either too weak and not creamy enough or delivery is too slow (a drop at a time), this can be corrected by adjusting the grinding adjustment dial (A5-g. 14).

Please note!

The grinding adjustment dial must only be turned when the coee mill is in operation.

If the coee is delivered too slowly or not at all, turn one click clockwise towards “7”. For fuller bodied creamier coee, turn one click anticlockwise towards “1” (do not turn more than one click at a time

otherwise the coee could be delivered a drop at a time). These adjustments will only be evident after at least 2 cups of coee have been delivered. If this adjustment does not obtain the desired result, turn the dial another click.

8.5 Tips for a hotter coee

For hotter coee, you should:

• perform a rinse cycle by selecting the “Rinse” function in

the settings menu (section”7.1 Rinsing”);

• warm the cups with hot water using the hot water function

(section “10.1 Hot water”);

• set a hotter coee temperature in the settings menu (sec-

tion “7.10 Setting the temperature”).

8.6 Making coee using coee beans

Important!

Do not use caramelised or candied coee beans as they could stick to the coee mill and make it unusable.

1. Fill the container (A3-g. 15) with coee beans.

2. Place under the coee spouts (A7):

- 1 cup, if you want to make 1 coee (g. 13);

- 2 cups, if you want 2 coees (g. 16).

3. Lower the spouts as near as possible to the cup (g. 16).

This makes a creamier coee.

4. Press the button corresponding to the number of coees

required (1 cup -B11 or 2 cups -B10).

5. Preparation begins. The amount of coee selected is dis-

played together with a progress bar which gradually lls as preparation progresses.

Please note:

• While the machine is making coee, delivery can be interrupted at any moment by pressing any button.

• At the end of delivery, to increase the quantity of coee in the cup, just press (within 3 seconds) one of the coee buttons ( or ) (g. 17).

Once the coee has been made, the appliance is ready to make the next drink.

Please note!

• Various alarm messages could be displayed while using the appliance (FILL TANK, EMPTY GROUNDS CONTAINER, etc.). Their meaning is explained in section “16. DISPLAYED MESSAGES”.

• For hotter coee, see section “8.5 Tips for a hotter coee”.

• If the coee is delivered a drop at a time, too weak and not creamy enough or too cold, read the tips in section “17. TROUBLESHOOTING”.

8.7 Making coee using pre-ground coee

Important!

• Never add pre-ground coee when the machine is o or it could spread through the inside of the machine and dirty it. This could damage the appliance.

• Never use more than 1 level measure (C2) or it could dirty the inside of the coee machine or block the funnel (A4).

Please note!

If you use pre-ground coee, you can only make one cup of

coee at a time.

1. Press the button (B2-g. 11) until “Pre-ground” appears on the display (B13).

2. Open the pre-ground coee funnel lid (A2).

3. Make sure the funnel (A4) is not blocked, then add one level measure of pre-ground coee (g. 18).

4. Place a cup under the coee spouts.

5. Press the 1 cup coee button (B11).

6. Preparation begins. The amount of coee selected is displayed together with a progress bar which gradually lls as preparation progresses.

Please note!

If “Energy Saving” mode is active, you may have to wait a few seconds before the rst coee is delivered.

8.8 Making LONG coee using coee beans

Prepare the appliance following the instructions in the section “8.6 Making coee using coee beans”, then press the button (B9-g. 19): “LONG COFFEE FUNCTION” appears on the display (B13), together with a progress bar which lls gradually as preparation proceeds.

Page 14

8.9 Making LONG coee using pre-ground coee

Follow the instructions in points 1, 2, 3 and 4 of the section “8.7 Making coee using pre-ground coee”, then press the button (B9- g. 19). The appliance starts making coee and “LONG COFFEE FUNCTION” appears on the display (B13), together with a progress bar which lls gradually as preparation proceeds. Halfway through preparation, the message “ADD PRE-GROUND COFFEE, Press OK” appears. Add one level measure of pre-ground coee and press OK (B12-g. 10). Preparation resumes and the appliance displays a progress bar which lls gradually as preparation proceeds.

8.10 Customising the LONG coee quantity

The appliance is set by default to automatically deliver about 6,09 .oz/180ml of LONG coee. To modify these settings, proceed as follows:

1. Place a suciently large cup or glass under the coee spouts (A7- g. 13).

2. Press and hold the button (B9-g.19) until “Program quantity” is displayed.

3. Release the ring coee;

4. As soon as the coee in the cup reaches the required level, press the

The quantity of coee in the cup has now been programmed.

Please note!

If the programme uses pre-ground coee, the appliance will prompt you to add a second level measure of coee (C2).

button. The appliance starts delive-

button again.

9. MAKING CAPPUCCINOS AND MILKBASED

COFFEES

Please note!

• To avoid producing milk with poor froth or large bubbles, always clean the milk container lid (D2) and hot water/ steam connection nozzle (A8) as described in sections “9.5 Cleaning the milk container after every use”, “11.10 Cleaning the milk container” and “11.11 Cleaning the hot water/ steam connection nozzle”

9.1 Filling and attaching the milk container

1. Remove the lid (D2- g. 20);

2. Fill the milk container (D3) with a sucient quantity of milk, not exceeding the MAX level marked on the container (g. 21). Each mark on the side of the container corresponds to about 3,38 .oz/100 ml of milk.

Please note!

• For a denser more even froth, you must use skimmed or partially skimmed milk at refrigerator temperature (about 5°C).

• If “Energy Saving” mode is enabled, you may have to wait a few seconds before the drink is delivered.

3. Make sure the milk intake tube (D4) is correctly inserted in the bottom of the milk container lid (g. 22).

4. Place the lid back on the milk container.

5. Extract the cappuccino maker/hot water spout (C6) by pressing the button (C7) on the spout (g. 23A and B).

6. Attach the milk container to the connection nozzle (A8) and push as far as it will go (g. 24). The machine emits a beep (if the beep function is enabled).

7. Place a suciently large cup under the coee spouts (A7) and frothed milk spout (D5). Adjust the length of the milk spout. To move it nearer the cup, simply pull it downwards (g. 25).

8. Follow the instructions below for each function.

9.2 Adjusting the amount of froth

Turn the froth adjustment dial (D1) to adjust the amount of froth on the milk delivered while making cappuccinos and milk-based coees.

Dial position

Description Recommended for…

No froth CAFFELATTE /

MILK hot milk)

Min. froth LATTE MACCHIATO/

FLAT WHITE

Max. froth CAPPUCCINO /

MILK (frothed milk)/ E

SPRESSO MACCHIATO

9.3 Making cappuccinos and milk-based coees

automatically

The CAPPUCCINO (B3), CAFFELATTE (B4) and LATTE MACCHIATO (B5) buttons on the control panel (B) enable these drinks to be prepared automatically. Proceed as follows:

1. Fill the milk container (D) and attach it as described above (g. 24).

2. Turn the froth adjustment dial (D1) on the milk container lid (D2) to the position corresponding to the required froth.

3. Press the button corresponding to the required drink. The name of the drink selected is displayed together with a progress bar which gradually lls as preparation progresses.

Page 15

4. After a few seconds, frothed milk is delivered from the milk spout (D5) into the cup below. Then the machine automatically makes the coee after delivering the milk.

9.4 Preparing “MILK MENU” drinks

Besides the drinks described above, the appliance automatically prepares MILK (hot milk), FLAT WHITE, ESPRESSO MACCHIATO and MY MILK (customisable). To prepare one of these drinks, simply proceed as follows:

1. Fill the milk container (D) and attach it as described above (g. 24).

2. Turn the froth adjustment dial (D1) on the milk container lid (D2) to the position corresponding to the required froth.

3. Press the MILK MENU button (B6).

4. Press < (B4) or > (B8) (g. 9) until the drink to be programmed appears on the display (B13) (MILK, FLAT WHITE, ESPRESSO MACCHIATO or MY MILK).

5. Press the OK button (B12- g. 10) to start delivery.

6. After a few seconds, frothed milk is delivered from the milk spout (D5) into the cup below. For drinks with coee, the machine automatically makes the coee after delivering the milk.

Please note: general indications when preparing all

milk-based drinks

• If you want to interrupt preparation during delivery, press the corresponding button.

• At the end of delivery, to increase the quantity of milk or coee in the cup, just press and hold (within 3 seconds) the button corresponding to the drink being made.

• Do not leave the milk container out of the refrigerator for long periods. The warmer the milk (5°C is ideal), the poorer the quality of froth produced.

4. Turn the dial back to one of the froth selections.

5. Remove the milk container (D) and always clean the hot water/steam connection nozzle (A8) with a sponge (g.

27).

Please note!

• To prepare a number of cappuccinos or milk-based coees, clean the milk container after you have prepared the last drink only.

• The milk container can be kept in the refrigerator.

• In some cases, to clean you must wait for the appliance to heat up.

9.6 Programming the quantity of coee

and milk in the cup for the CAPPUCCINO, CAFFELATTE and LATTE MACCHIATO buttons

The appliance is set by default to automatically deliver standard quantities. To change these quantities, proceed as follows:

1. Place a cup under the coee spouts (A7) and milk spout (D5).

2. Press and hold one of the buttons until the name of the drink and “PROGRAM MILK” are displayed.

3. Release the button. The appliance starts delivering milk.

4. Once the required quantity of milk has been delivered into the cup, press the button again.

5. The appliance stops delivering milk and, if required for the drink being prepared, after a few seconds the coee is delivered into the cup. The name of the drink and “PROGRAM COFFEE” are displayed.

6. Once the required quantity of coee has been delivered into the cup, press the button again. Coee delivery stops.

The machine is now reprogrammed with the new milk and coffee quantities.

9.5 Cleaning the milk container after every use

Important! Danger of burns

When cleaning the internal tubes of the milk container (D4), a little hot water and steam leak out of the frothed milk spout (D5). Avoid contact with splashes of water. “SET DIAL TO CLEAN” ashes on the display (B13) each time you use a milk function. To eliminate all milk residues, proceed as follows:

1. Leave the milk container in the machine (you do not need to empty it);

2. Place a cup or other recipient under the frothed milk spout (D5).

3. Turn the froth adjustment dial (D1) to “CLEAN” (g. 26). A progress bar appears and gradually lls as the operation proceeds together with “Cleaning underway”. Cleaning stops automatically.

9.7 Programming the quantity of coee and milk in the cup for MILK MENU drinks

The appliance is set by default to automatically deliver standard quantities. To change these quantities, proceed as follows:

1. Press the MILK MENU button (B6).

2. Press < (B4) or > (B8) (g. 9) until the drink to be pro-

grammed appears on the display (B13) (MILK, FLAT WHITE, ESPRESSO MACCHIATO or MY MILK).

3. Press and hold the OK button (B12- g. 10) until the name

of the drink and “PROGRAM MILK” appear.

4. Release the button. The appliance starts delivering milk.

5. Once the required quantity of milk has been delivered into

the cup, press the OK button.

6. The appliance stops delivering milk and, if required for the

drink being prepared, after a few seconds the coee is delivered into the cup. The name of the drink and “PROGRAM COFFEE” are displayed.

Page 16

7. Once the required quantity of coee has been delivered into the cup, press the OK button again. Coee delivery stops.

The machine is now reprogrammed with the new milk and coffee quantities.

10. DELIVERING HOT WATER AND STEAM

Important! Danger of burns.

Do not leave the appliance unattended while hot water or steam is being delivered. The cappuccino maker/hot water spout (C6) becomes hot during delivery. Hold by the handle only.

Please note!

If “Energy Saving” is active, you may have to wait a few seconds before hot water and steam are delivered.

10.1 Hot water

1. Make sure the cappuccino maker/hot water spout (C6) is attached correctly.

2. Place a cup under the spout (as close as possible to avoid splashes).

3. Press the button (B7- g. 6). “HOT WATER” appears on the display (B13), together with a progress bar which lls gradually as preparation proceeds.

4. The machine delivers about 8,45 .oz/250ml of hot water, then delivery stops automatically. To interrupt delivery of hot water manually, press the button again.

10.2 Changing the quantity of water delivered

automatically

The machine is set by default to automatically deliver 8,45 .oz/250ml of hot water. To modify these quantities, proceed as follows:

1. Position a cup under the cappuccino maker/hot water spout (C6).

2. Press and hold the button (B7-g. 6) until “HOT WATER Program quantity” appears on the display (B13), then release the button.

3. When the hot water in the cup reaches the required level, press the button again.

The machine is now reprogrammed with the new quantity.

10.3 Steam delivery

1. Make sure the cappuccino maker/hot water spout (C6) is attached correctly.

2. Fill a container with the liquid to be heated/frothed and immerse the cappuccino maker/hot water spout in the liquid.

3. Press the button (B8). After a few seconds, the steam to heat the liquid comes out of the cappuccino maker/hot water spout and “STEAM” is displayed.

4. When the required temperature is obtained, interrupt steam delivery by pressing the button again. (You should not discharge steam for more than 3 minutes at a time).

Important!

Always stop steam delivery before extracting the container containing the liquid to avoid burns from splashes.

10.4 Tips for using steam to froth milk

• When choosing the size of the container, bear in mind that the liquid doubles or triples in volume.

• For a richer denser froth, use skimmed or partially skimmed milk at refrigerator temperature (about 5°C).

• For a creamier froth, rotate the container with slow movements in an upward direction.

• To avoid milk with poor froth or large bubbles, always clean the spout as described in the following section.

10.5 Cleaning the spout after use

Always clean the cappuccino maker/hot water spout (C6) after use to avoid the build-up of milk residues and prevent it from clogging.

1. Place a container under the cappuccino maker/hot water spout and press the button (B7-g. 6) to deliver a little water. Stop the ow of hot water by pressing the button again.

2. Wait a few minutes for the cappuccino maker/hot water spout to cool down, then press the button (C7) to remove it (g. 28A). Hold the spout with one hand and with the other, turn the cappuccino maker/hot water spout anticlockwise (g. 28B) and pull downwards to remove.

3. Also remove the steam nozzle by pulling it downwards (g.

29).

Check the hole shown by the arrow in g. 30 is not blocked. If necessary, clean with a pin.

5. Wash all parts of the cappuccino maker/hot water spout thoroughly with a sponge and warm water.

6. Reinsert the nozzle and replace the cappuccino maker on the nozzle, pushing it upwards and turning it until it is attached.

Page 17

11. CLEANING

11.1 Cleaning the machine

The following parts of the machine must be cleaned regularly:

- the appliance’s internal circuit;

- coee grounds container (A10);

- drip tray (A12) and condensate tray (A9);

- water tank (A16);

- coee spouts (A7);

- pre-ground coee funnel (A4);

- infuser (A15), accessible after opening the service door (A14);

- milk container (D);

- cappuccino maker/hot water spout (C6 - section “10.5 Cleaning the spout after use”);

- hot water/steam connection nozzle (A8);

- display (B).

Important!

• Do not use solvents, abrasive detergents or alcohol to clean the coee machine. With De’Longhi superautomatic coee machines, you need not use chemical products to clean the machine.

• None of the components of the appliance can be washed in a dishwasher with the exception of the milk container (D).

• Do not use metal objec ts to remove encrustations or coee deposits as they could scratch metal or plastic surfaces.

11.2 Cleaning the machine’s internal circuit

If the appliance is not used for more than 3/4 days, before using it again, we strongly recommend switching it on and:

- performing 2-3 rinse cycles (see section “7.1 Rinsing”);

- deliver hot water for a few seconds by pressing the button (B7- g. 6).

Please note!

After cleaning, it is normal for the grounds container (A10) to contain water.

11.3 Cleaning the coee grounds container

When “EMPTY GROUNDS CONTAINER” appears on the display (B13), the grounds container must be emptied and cleaned. The appliance cannot be used to make coee until you have cleaned the grounds container (A10). Even if not full, the empty grounds container message is displayed 72 hours after the rst coee has been prepared. For the 72 hours to be calculated correctly, the machine must never be turned o with the main switch (A19).

Important! Danger of burns

If you make a number of cappuccinos one after the other, the metal cup tray (A11) becomes hot. Wait for it to cool down before touching it and handle it from the front only.

To clean (with the machine on):

• Remove the drip tray (A12) (g. 31), empty and clean.

• Empty the grounds container (A10) and clean thoroughly to remove all residues left on the bottom. This can be done using the spatula on the brush (C5) provided.

• Check the condensate tray (A9) and empty if necessary (g.

32).

Important!

When removing the drip tray, the grounds container must be emptied, even if it contains few grounds. If this is not done, when you make the next coees, the grounds container may ll up more than expected and clog the machine.

11.4 Cleaning the drip tray and condensate tray

Important!

The drip tray (A12) is tted with a level indicator (A13 - red) showing the level of water it contains (g. 33). Before the indicator protrudes from the cup tray (A11), the drip tray must be emptied and cleaned, otherwise the water may overow the edge and damage the appliance, the surface it rests on or

the surrounding area.

To remove the drip tray:

1. Remove the drip tray and grounds container (g. 31);

2. Empty the drip tray and grounds container (A10) and wash them;

3. Check the condensate tray (A9 - g. 32) and empty if necessary;

4. Replace the drip tray and grounds container.

11.5 Cleaning the inside of the coee machine

Danger of electric shock!

Before cleaning internal parts, the machine must be turned o (see section “6. TURNING THE APPLIANCE OFF”) and unplugged from the mains power supply. Never immerse the coee machine in water.

1. Check regularly (about once a week) that the inside of the appliance (accessible after removing the drip tray (A12) is not dirty. If necessary, remove coee deposits with the brush (C5) supplied and a sponge.

Page 18

2. Remove all the residues with a vacuum cleaner (g. 34).

11.6 Cleaning the water tank

Clean the water tank (A16) regularly (about once a month) and whenever you replace the water softener lter (C4) (if provided) with a damp cloth and a little mild washing up liquid.

2. Remove the lter (if present) and rinse with running water.

3. Replace the lter (if provided), ll the tank with fresh water and replace the tank.

4. (Models with water softener lter only) Deliver about 3,38 .oz/100 ml of water.

11.7 Cleaning the coee spouts

1. Clean the coee spouts (A7) regularly with a sponge or cloth (g. 35).

2. Check that the holes in the coee spouts are not blocked.

If necessary, remove coee deposits with a toothpick (g. 35).

11.8 Cleaning the pre-ground coee funnel

Check regularly (about once a month) that the pre-ground coee funnel (A4) is not blocked. If necessary, remove coee deposits with the brush (C5) supplied.

4. Press the two coloured release buttons inwards and at the same time pull the infuser outwards (g. 37);

5. Soak the infuser in water for about 5 minutes, then rinse under the tap.

Important!

RINSE WITH WATER ONLY NO WASHING UP LIQUID  NO DISH WASHER Clean the infuser without using washing up liquid as it

could be damaged.

6. Use the brush (C5) to remove any coee residues left in the infuser housing, visible through the infuser door.

7. After cleaning, replace the infuser by sliding it onto the internal support (g. 38), then push the PUSH symbol fully in until it clicks into place.

Please note!

If the infuser is dicult to insert, before insertion, adapt it to the right size by pressing the two levers shown in g. 39.

11.9 Cleaning the infuser

The infuser (A15) must be cleaned at least once a month.

Important!

The infuser may not be extracted when the machine is on.

1. Make sure the machine is correctly turned o (see section “6. TURNING THE APPLIANCE OFF”).

2. Remove the water tank (A16- g. 3).

3. Open the infuser door (A14- g. 36) on the right side of the appliance.

PUSH

8. Once inserted, make sure the two coloured buttons have snapped out (g. 40).

PUSH

9. Close the infuser door.

10. Put the water tank back.

Page 19

11.10 Cleaning the milk container

To keep the frother ecient, clean the milk container (D) every two days as described below:

1. Remove the lid (D2).

2. Remove the milk spout (D5) and intake tube (D4).

3. Turn the froth regulator (D1) to the “INSERT” position (g.

41) and pull it o upwards.

4. Wash all the components thoroughly with hot water and mild washing-up liquid. All components are dishwasher safe, placing them in the top basket of the dishwasher.

Make sure there are no milk residues on the hollow and

groove under the dial (g. 42). If necessary, scrape the groove with a toothpick.

12. DESCALING

Descale the machine when the message “DESCALE” ashes on the display (B13).

Important!

• Before use, read the instructions and the labelling on the descaler pack.

• You should use De’Longhi descaler only. Using unsuitable descaler and/or performing descaling incorrectly may result in faults not covered by the manufacturer’s guarantee.

1. Turn the appliance on and wait until it is ready for use;

2. Press the MENU/ESC button (B14) to enter the menu;

3. Press < (B4) or > (B8) (g. 9) until “Descale” is displayed;

4. Select by pressing the OK button (B12- g. 10): the message “Descale Conrm?” is displayed;

5. Press the OK button again to conrm. “EMPTY DRIP TRAY” is displayed, alternating with “REMOVE FILTER” (if the lter is present) and “Add descaler Press OK”;

6. Empty the water tank (A16) completely and remove the water softener lter (C4), if present. Empty the drip tray (A12 - g. 31) and grounds container (A10), then put them back in the appliance.

7. Pour the descaler into the

A B

tank up to level A (corresponding to a 3,38 .oz/ 100ml pack) marked on the inner surface of the tank (g. 44), then add water (33,81 .oz/1 litre) up to level B (g. 44) and put the water tank back.

42 43

5. Rinse inside the froth adjustment dial seat with running water (g. 43).

6. Check that the intake tube and spout are not clogged with milk residues.

7. Replace the dial (in correspondence to the word “INSERT”), spout and milk intake tube.

8. Place the lid back on the milk container.

11.11 Cleaning the hot water/steam connection

nozzle

Each time you prepare milk, clean the connection nozzle (A8) with a sponge to remove milk residues from the gaskets (g.

27).

8. Place an empty container with a minimum capacity of 67,63 .oz/2.0 litres under the coee spouts (A7) and hot water spout (C6) (g. 45);

2 l

Important!

Danger of burns

Hot water containing acid ows

out from the coee and hot water spouts. Take care to avoid contact with splashes of this solution.

9. Press the OK button to conrm that you have added the

descaler solution. The message “Descale underway” is dis-

Page 20

played and the descaling procedure begins. The descaler liquid comes out of the caee spouts and hot water spout and a series of rinses and pauses is performed to remove

limescale deposits from inside the machine; After about 25 minutes, descaling stops and the messages “RINSING” and “FILL TANK” alternate on the display;

10. The appliance is now ready for rinsing through with clean

water. Empty the container used to collect the descaler

solution. Extract the water tank, empty, rinse under run-

ning water, ll with fresh water up to the MAX level and

put back in the appliance: “RINSING, Press OK” is displayed;

11. Place the container used to collect the descaler solution

empty under the coee spouts and hot water spout (g.

45);

12. Press the OK button to start rinsing. Hot water ows out

of the spouts and the message “RINSING Please wait” is

displayed.

13. When the water tank is empty, the messages “RINSING”,

“FILL TANK” and “REPLACE FILTER” (if previously removed)

alternate on the display. Empty the container used to col-

lect the rinsing water;

14. Remove the water tank, replace the water softener lter (if

previously removed), ll the tank up to the MAX level with

fresh water and insert it in the appliance. “RINSING Press

OK” appears on the display;

15. Place the container used to collect the rinsing water empty

under the hot water spout (g. 45);

16. Press the OK button to resume rinsing. Rinsing begins

again from the hot water spout only and the message

“RINSING Please wait” is displayed;

17. When it nishes, the message “Rinsing complete, Press OK”

is displayed;

18. Press the OK button. The message “FILL TANK” is displayed;

19. Empty the drip tray, remove and top up the water tank

with fresh water to the MAX level and put back in the

machine. Descaling is complete.

Please note!

• If the descaling cycle is not completed correctly (e.g. no

electricity) we recommend repeating the cycle;

• After descaling, it is normal for the grounds container

(A10) to contain water.

13. SETTING WATER HARDNESS

The DESCALE message appears on the display after a period of time established according to water hardness. The machine is set by default for a hardness value of 4. The machine can also be programmed according to the hardness of the mains water in the various regions so that the machine needs to be descaled less often.

13.1 Measuring water hardness

1. Remove the “TOTAL HARDNESS TEST” indicator paper (C1) from its pack (attached to the English instructions).

2. Immerse the paper completely in a glass of water for one second.

3. Remove the paper from the water and shake lightly. After about a minute, 1, 2, 3, or 4 red squares form, depending on the hardness of the water. Each square corresponds to one level.

soft water

slightly hard water

hard water

very hard water

13.2 Setting water hardness

1. Press the MENU/ESC (B14) button to enter the menu.

2. Press < (B4) or > (B8) (g. 9) and select “Water hardness”.

3. Conrm the selection by pressing the OK button (B12- g.

10).

4. Press < or > repeatedly to set the level as measured by the indicator paper (see previous section).

5. Press the OK button to conrm the setting.

6. Press the MENU/ESC button to exit the menu.

The machine is now reprogrammed with the new water hardness setting.

14. WATER SOFTENER FILTER

Certain models are tted with a water softener lter (C4). If this is not the case with your model, you are recommended to purchase one from De’Longhi Customer Services. To use the lter correctly, follow the instructions below.

14.1 Installing the lter

1. Remove the lter (C4) from the packaging.

2. Turn the date indicator disk (see g. 46) until the next two months of use are displayed.

Please note

The lter lasts about two months if the appliance is used normally. If the coee machine

is left unused with the lter in-

stalled, it will last a maximum of three weeks.

Page 21

3. To activate the lter, run tap water through the hole in the lter as shown in the gure until water comes out of the openings at the side for more than a minute (g. 47).

0,5 L

4847

4. Extract the tank (A16) from the appliance and ll with water.

5. Insert the lter in the water tank and immerse it completely for about ten seconds, sloping it and pressing it lightly to enable the air bubbles to escape (g. 48).

6. Insert the lter in the lter housing (A17- g. 49A) and press as far as it will go.

7. Close the tank with the lid (A18- g. 49B), then replace the tank in the machine.

49A 49B

When you install the lter, you must notify the appliance of its presence.

8. Press the MENU/ESC button (B14) to enter the menu;

9. Press < (B4) or > (B8) (g. 9) until “Install lter” appears on the display (B13).

10. Press the OK button (B12- g. 10).

11. “Install?” is displayed.

12. Press the OK button to conrm the selection. “HOT WATER Press OK” is displayed.

13. Position a container under the hot water spout (C6) (min. capacity: 17 .oz/500 ml).

14. Press the OK button to conrm the selection. The appliance begins hot water delivery and the message “Please wait” is displayed.

15. After the ow of hot water stops, the appliance automatically resets to “Ready for coee” status.

The lter is now active and you can use the coee machine.

14.2 Replacing the lter

When “REPLACE FILTER” appears on the display (B13), after two months (see date indicator) or when the appliance has not been used for 3 weeks, you should replace the lter (C4):

1. Extract the tank (A16) and exhausted lter;

2. Take the new lter out of its packet and proceed as illustrated in points 2, 3, 4, 5, 6 and 7 in the previous section.

3. Position a container with a minimum capacity of 17 .oz/ 500ml under the hot water spout (C6).

4. Press the MENU/ESC button (B14) to enter the menu;

5. Press < (B4) or > (B8) (g. 9) until “Replace lter” is displayed.

6. Press the OK button (B12- g. 10);

7. The message “Conrm?” is now displayed

8. Press the OK button to conrm the selection;

9. “HOT WATER Press OK” is displayed;

10. Press the OK button to conrm the selection. The appliance begins hot water delivery and the message “Please wait” is displayed.

11. After the ow of hot water stops, the appliance automatically resets to “Ready for coee” status.

The new lter is now active and you can use the coee machine.

14.3 Removing the lter

If you want to use the appliance without the lter (C4), you must remove it and notify the appliance of its removal. Proceed as follows:

1. Extract the tank (A16) and exhausted lter;

2. Press the MENU/ESC button (B14) to enter the menu;

3. Press < (B4) or > (B8-g. 9) until “Install lter, Enabled” is displayed;

4. Press the OK button (B12- g. 10);

5. “Disable?” appears on the display;

6. Press the OK button to conrm and the MENU/ESC button to exit the menu.

15. TECHNICAL DATA

Voltage: 120 V~ 60 Hz max. 10 A Power: 1250 W Pressure: 1,5 MPa (15 bar) Water tank capacity: 2 L Size LxDxH: 260x470x365 mm Cord length: 1750 mm Weight: 11 kg Beans container capacity: 400 g

Page 22

16. DISPLAYED MESSAGES

DISPLAYED MESSAGE POSSIBLE CAUSE SOLUTION

FILL TANK Insucient water in the tank (A16). Fill the tank with water and/or insert it cor-

rectly, pushing it as far as it will go until it clicks into place.

EMPTY GROUNDS CONTAINER The grounds container (A10) is full.

GROUND TOO FINE ADJUST MILL

INSERT GROUNDS CONTAINER After cleaning, the grounds container has not

ADD PREGROUND COFFEE With the “pre-ground coee” function selected,

DESCALE The machine must be descaled. The descaling procedure described in section

REDUCE COFFEE AMOUNT Too much coee has been used.

FILL BEANS CONTAINER The coee beans have run out. Fill the beans container (A3-g. 15).

INSERT INFUSER ASSEMBLY The infuser has not been replaced after clea-

The grinding is too ne and the coee is delivered too slowly or not at all.

If the water softener lter (C4) is present, an air bubble may have been released inside the circuit, obstructing delivery.

been replaced (A10).

pre-ground coee has not been poured into the funnel (A4).

The pre-ground coee funnel (A4) is clogged. Empty the funnel with the help of the brush

ning (A15).

Empty the grounds container and drip tray (A12), clean and replace (g. 31). Important: when removing the drip tray, the grounds container MUST be emptied, even if it contains few grounds. If this is not done, when you make the next coees, the grounds container may ll up more than expected and clog the machine.

Repeat coee delivery and turn the grinding adjustment dial (A5, g. 14) one click clockwise towards “7” while the coee mill is in operation. If after making at least 2 coees delivery is still too slow, repeat the correction procedure, turning the grinding adjustment dial another click (section “8.4 Adjusting the coee mill”). the water tank (A16) is fully inserted, press the

from the spout (C6).

Insert hot cappuccino maker/water spout (C6) in the appliance and deliver a little water until the ow becomes regular.

Remove the drip tray (A12-g. 31) and insert the grounds container.

Place pre-ground coee in the funnel or deselect the “pre-ground” function (g. 18).

“12. DESCALING” needs to be per formed as soon as possible.

Select a milder taste by pressing the button (B2- g. 11) or reduce the quantity of pre-ground coee.

(C5) as described in section “11.8 Cleaning the pre-ground coee funnel”.

Insert the infuser as described in section “11.9 Cleaning the infuser”.

If the problem persists, make sure

button (B7-g. 6) and deliver a little water

Page 23

INSERT TANK The tank (A16) is not correctly in place. Insert the tank correctly and press as far as it

will go.

GENERAL ALARM The inside of the appliance is very dirty. Clean the inside of the appliance thoroughly,

as described in section “11. CLEANING”. If the message is still displayed after cleaning, contact a service centre.

EMPTY CIRCUIT FILL CIRCUIT

alternating with

HOT WATER Press OK

REPLACE FILTER The water softener lter (C4) is exhausted. Replace the lter or remove it as described in

SET DIAL TO CLEAN Milk has been delivered recently and the tubes

INSERT WATER SPOUT The cappuccino maker/hot water spout (C6) is

INSERT MILK CONTAINER The milk container (D) is not inserted correctly. Insert the milk container (g. 24) as far as it

The water circuit is empty Press OK (B12- g. 10) to deliver water from

the spout (C6) until it ows out normally. If the problem persists, make sure the water tank (A16) is fully inserted.

section “14. WATER SOFTENER FILTER”.

Turn the froth adjustment dial (D1) to the

inside the milk container must be cleaned (D).

not inserted or is inserted incorrectly

CLEAN position (g. 26).

Insert the spout as far as it will go.

will go.

17. TROUBLESHOOTING

Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact Customer Services.

PROBLEM POSSIBLE CAUSE SOLUTION

The coee is not hot. The cups were not preheated. • Enable the cup warmer (A6), leave the

cups at least 20 minutes to warm up.

• Warm the cups by rinsing them with hot water (Please note: you can use the hot water function).

The coee is weak or not creamy enough.

The internal circuits have cooled down because 2/3 minutes have elapsed since the last coee was made.

A low coee temperature is set.

The coee is ground too coarsely. Turn the grinding adjustment dial (A5) one

The coee is unsuitable. Use pre-ground coee for espresso machines.

Before making the coee, heat the infuser by rinsing using the "rinse" function (see section “7.1 Rinsing”).

Set a hotter coee temperature (see section “7.10 Setting the temperature”).

click anticlockwise towards "1" while the coffee mill is in operation (g. 14). Continue one click at a time until coee delivery is satisfactory. The eect is only visible after delivering 2 coees (see section “8.4 Adjusting the coee mill”).

Page 24

The coee is delivered too slowly or a drop at a time.

Coee does not come out of one or both of the spouts.

The appliance does not come on It is not plugged into the mains socket. Plug into the mains socket (g. 1).

The coee is ground too nely. Turn the grinding adjustment dial (A5) one

click clockwise towards "7" while the coee mill is in operation (g. 14). Continue one click at a time until coee delivery is satisfactory. The eect is only visible after delivering 2 coees (see section “8.4 Adjusting the coee mill”).

The coee spouts (A7) are blocked. Clean the spouts with a toothpick (see section

“11.7 Cleaning the coee spouts”).

The main switch (A19) is not turned on. Press the main switch (g. 2).

The infuser cannot be extracted The appliance has not been turned o

correctly

The milk does not come out of the milk spout (D5)

The milk contains large bubbles and squirts out of the milk spout (D5) or there is little froth

The milk contains large bubbles and squirts out of the milk spout or there is little froth.

The milk container lid (D2) is dirty. Clean the milk container lid as described in sec-

The milk is not cold enough or is not semi-skimmed.

The froth adjustment dial (D1) is incorrectly adjusted.

The milk container lid (D2) or froth adjustment dial (D1) are dirty.

The hot water/steam connection nozzle (A8) is dirty.

The cappuccino maker/ hot water spout (C6) is dirty.

Turn the appliance o by pressing the button (B1-g. 8) (section “6. TURNING THE APPLIANCE OFF”).

tion “11.10 Cleaning the milk container”.

Use skimmed or semi-skimmed milk at refrigerator temperature (about 5° C). If the result is not as you wished, try changing brand of milk.

Adjust following the instructions in section “9. MAKING CAPPUCCINOS AND MILK-BASED COFFEES”.

Clean the milk container lid and dial as described in section “11.10 Cleaning the milk container”.

Clean the connection nozzle as described in section “11.11 Cleaning the hot water/steam connection nozzle”.

Clean as described in section “10.5 Cleaning the spout after use”.

Page 25

De’Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com

5713229381/07.16 - Printed in Italy

Delonghi ECAM45760S Instruction manuals

Specifications and Main Features

Frequently Asked Questions

User Manual