DeLonghi ECAM45086T User Manual

Download

ECAM45X.6Y - 45X.8Y

BEAN TO CUP ESPRESSO AND

CAPPUCCINO MACHINE

Instruction for Use

Instructions videos available at:

https://eletta-explore.delonghi.com

A4 A3

A13

A14

A10

A11

A12

A16

A19

A20

A21

A22

A15

A17

A18

B C

C5* C6C4

Explorer 1

Espresso Cappuccino Cold Brew

C2C1

E F

Decalcicante per macchine da caè

Descaler for coee machines

Détartrant pour machines à café

Entkalker für Kaeemaschinen

De’Longhi Appliances s.r.l.

Via L. Seitz, 47 31100 Treviso - ITALY

Tel. +39 0422 4131

5413218631/04.15

E4 F4

E5 E7

E2 F2

CONTENTS

1. INTRODUCTION ..........................................5

1.1 Letters in brackets .........................................5

1.2 Troubleshooting and repairs ..........................5

1.3 Download the App! .......................................5

2. DESCRIPTION.............................................5

2.1 Description of the appliance (A) ....................5

2.2 Description of the control panel (B) ...............5

2.3 Description of the homepage (main screen)

2.4 Description of the accessories (D) (*varies

according to model) ......................................6

2.5 Description of milk carafe (hot) (E) ................6

2.6 Description of milk carafe (cold) (F)...............6

3. SETTING UP THE APPLIANCE U .................6

4. TURNING THE APPLIANCE ON U ................7

5. TURNING THE APPLIANCE OFF ....................7

6. MENU SETTINGS U ...................................7

6.1 Rinsing .........................................................7

6.2 Descaling ......................................................8

6.3 Connectivity ..................................................8

6.4 Adjust grinder ...............................................8

6.5 Coee temperature .......................................8

6.6 Languages.....................................................8

6.7 Create and edit proles .................................8

6.8 Set auto-o ..................................................9

6.9 General .........................................................9

6.10 Water lter ..................................................9

6.11 Water hardness ............................................9

6.12 Default values ..............................................9

6.13 Drain water ..................................................9

6.14 Statistics ......................................................10

7. DRINK SELECTION .................................... 10

8. MAKING COFFEE DRINKS U .....................10

8.1 Prepare the machine to make coee drinks .10

8.2 Directly selected drinks ...............................11

8.3 Customising the drinks ................................11

8.4 Making coee using pre-ground coee .......12

8.5 Bean Adapt Technology & Espresso SOUL ...12

8.6 General indications for making coee drinks...

..................................................................12

8.7 Tips for a hotter coee.................................13

8.8 Coee / Cold Brew pot .................................13

8.9 Cleaning the coee pot

..............................13

9. MAKING MILK DRINKS U ........................14

9.1 Preparing the milk carafes (E and F) ............14

9.2 Which milk to use? ......................................14

9.4 Adjusting the amount of froth .....................14

9.5 Making milk drinks......................................15

9.6 Cleaning the milk carafe after use ..............15

10. PREPARING HOT WATER AND HOT TEA U .. 15

10.1 Preparing the appliance ..............................15

10.2 Making hot tea ............................................15

10.3 Preparing hot water ....................................16

11. FAVOURITE DRINKS U .............................16

12. MAKING “TO GO” DRINKS U ..................... 16

12.1 Cleaning the travel mug after use ...............17

13. “MY” FUNCTION “HOT” DRINKS ONLY U . 17

14. SELECTING YOUR PERSONAL PROFILE U .. 17

15. CLEANING U ......................................... 17

15.1 Cleaning the machine .................................17

15.2 Cleaning the internal circuit ........................18

15.3 Cleaning the coee grounds container ........18

15.4 Cleaning the drip tray and drip tray grille ....18

15.5 Cleaning the inside of the machine ............19

15.6 Cleaning the water tank ..............................19

15.7 Cleaning the coee spouts ..........................19

15.8 Cleaning the pre-ground coee funnel .......19

15.9 Cleaning the brewing unit ...........................19

15.10 Cleaning the milk carafes (E) and (F) ...........20

16. DESCALING U ........................................ 21

17. SETTING WATER HARDNESS ..................... 22

17.1 Measuring water hardness ..........................22

17.2 Setting water hardness ...............................22

18. WATER SOFTENER FILTER ......................... 22

18.1 Installing the lter ......................................22

18.2 Replacing or removing the lter ..................23

19. TECHNICAL DATA ...................................... 23

19.1 Tips for Energy Saving .................................23

20. DISPLAYED MESSAGES .............................. 24

21. TROUBLESHOOTING ................................ 27

1. INTRODUCTION

Thank you for choosing this bean to cup espresso and cappuccino machine. Take a few minutes to read this Instruction for Use. This will avoid all risks and damage to the appliance.

1.1 Letters in brackets

The letters in brackets refer to the description of the appliance on pages 2- 3.

1.2 Troubleshooting and repairs

In the event of problems, rst try and resolve them by reading the information given in sections “20. Displayed messages” and “21. Troubleshooting”. If this does not resolve the problem or further information is required, consult the customer services department at the numbers indicated on the website www.delonghi.com. If repairs are required, contact De’Longhi customer services only. Addresses can be found on the website www.delonghi.com.

1.3 Download the App!

Download the App then follow the instructions in the App to create your account. In the App, you can nd creative recipes, information, tips and curious facts about the world of coee, together with information on your machine at your ngertips. MAKE SURE THAT THE APP IS AVAILABLE IN YOUR COUNTRY: app-availability.delonghi.com

In connected models, you can manage a number of functions remotely from the Coee Link App.

This symbol highlights the functions you can control or

consult using the App.

You can also create new drinks and save them in your appliance.

Please note:

• To access the functions from the App, enable connectivity from the appliance’s settings menu (see “6.3 Connectivity”).

• Check compatible devices on “compatibledevices.delonghi. c o m”.

2. DESCRIPTION

2.1 Description of the appliance (A)

A1. Beans container lid A2. Beans container A3. Grinding coarseness regulator A4. Pre- ground coee funnel A5. Brewing unit ap A6. Removable brewing unit A7. Coee spouts (adjustable height) A8. Accessories connector A9. button: turns the appliance on and o (standby) A10. Coee grounds container A11. Condensate tray A12. Cup tray A13. Tray grille A14. Drip tray A15. Travel mug compartment A16. Travel mug compartment ap assembly A17. Flap grille A18. Flap grille support A19. Drip tray water level indicator A20. Power cord A21. Water tank lid A22. Water tank

2.2 Description of the control panel (B)

B1. “Cold” drinks menu B2. “To go” drinks menu B3. “Hot” drinks menu B4. “Favourites” drinks menu

2.3 Description of the homepage (main screen) (C)

C1. Selectable drinks (direct selection) C2. To display and customise the drink settings C3. Appliance settings menu C4. Indicator lights:

Machine waiting for rst connection

•

Wi-Fi active light

•

No network light

•

Energy saving active light

•

Milk carafe cleaning required light

•

Descaling required light

•

Filter exhausted light

•

C5. Bean Adapt Technology (enable from App): see “8.5 Bean

Adapt Technology & Espresso SOUL”

C6. Customisable proles (see “14. Selecting your personal

prole”)

2.4 Description of the accessories (D) (*varies

according to model)

Accessories in the Starter pack:

D1. “Total Hardness Test” indicator paper D2. Pre-ground coee measure D3. Descaler D4. Water softener lter D5. Cleaning brush D6. Hot water spout D7. Ice cube tray

D8. Coee pot D9. Travel mug

2.5 Description of milk carafe (hot) (E)

E1. Milk carafe lid E2. Milk carafe E3. Froth adjustment/Clean dial E4. Milk carafe connector (removable for cleaning) E5. Milk spout (adjustable height) E6. Milk intake tube (silicone) E7. Milk spout extension

2.6 Description of milk carafe (cold) (F)

1. Connect the power cord (A20) to the mains supply (g. 1).

2. Press the ag corresponding to the desired language and

conrm the selection by pressing “Done”. Now follow the instructions indicated on the display of the appliance:

3. Remove the water tank (A22) (g. 2) and ll to the MAX

line with fresh potable water (g. 3);

MAX

F1. Milk carafe lid F2. Milk carafe F3. Froth adjustment/Clean dial F4. Milk carafe connector (removable for cleaning) F5. Milk spout F6. Milk intake tube (rigid plastic)

3. SETTING UP THE APPLIANCE U

Please note:

• Possible traces of coee in the grinder are the result of settings tests performed on the appliance before sale, proof of the meticulous care and attention we invest in our products.

• The rst time you use the appliance, all removable accessories (milk carafe (E) and (F), travel mug* (D9), coee pot* (D8), water tank (A21) and (A22)) destined to come into contact with water or milk should be rinsed with hot water. We recommend washing the milk carafes in a dishwasher.

• You should customise water hardness as soon as possible following the instructions in section “17. Setting water hardness”.

2 32 3

4. Then put the tank back and conrm by pressing “Next”;

5. Fill the beans container (A2) (g. 4), then conrm by pressing “Next”.

4 5

6. Insert the hot water spout (D6) on the accessories connector (A8) (g. 5) and place a container with a minimum capacity of 200 ml under the coee spouts (A7) and hot water spout (g. 6);

6 7

7. Press “OK” to ll the water circuit. The appliance delivers water from the hot water spout (g. 7);

8. At the end of delivery, the appliance proceeds to warm up by performing a rinse cycle, delivering hot water from the coee spouts (g. 8).

When at temperature, the appliance proposes a tutorial on how to use the machine.

Please note:

• The rst time you use the appliance, you need to make 4-5 cappuccinos before the results in the cup will be satisfactory.

• The rst time you use the machine, the water circuit is empty and the appliance could be very noisy.The noise becomes less as the circuit lls.

4. TURNING THE APPLIANCE ON U

Please note:

• Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted. The appliance is not ready for use until the cycle has been completed.

1. To turn the appliance on, press the

9): the appliance comes on.

button (A9) (g.

2. When at temperature, the appliance performs a rinse cycle delivering hot water from the coee spouts(A7); as well as heating the boiler, this also heats the internal circuits by circulating hot water.

5. TURNING THE APPLIANCE OFF

Whenever the coee machine is turned o after being used to make coee, it performs an automatic rinse cycle.

1. To turn the appliance o, press the button (A9) (g.

9).

2. I

f envisaged, the appliance rinses the coee spouts (A7)

with hot water, then goes o (stand-by).

Please note:

If you will not be using the appliance for some time, turn o, then unplug from the mains socket.

Important!

Never unplug while the appliance is on.

6. MENU SETTINGS U

6.1 Rinsing

Use this function to deliver hot water from the coee spouts (A7) (and, if inserted, the hot water spout (D6)), to clean and heat the appliance’s internal circuit. Place a container with a minimum capacity of 100 ml under the spouts (g. 6). To enable the function, proceed as follows:

1. Press the settings menu (C3);

2. Display “Rinsing”;

3. Press “OK” to start delivery. After a few seconds, hot water is delivered to clean and heat the appliance’s internal circuit (g. 7- 8);

4. To stop rinsing, press “Stop” or wait for rinsing to stop automatically.

Please note:

• If the appliance is not used for more than 3-4 days, when you turn it on again, we strongly recommend performing 2-3 rinses before use;

• After cleaning, it is normal for the grounds container (A10) to contain water.

6.2 Descaling

For instructions on descaling, see section “16. Descaling”.

6.3 Connectivity

Use this function to enable or disable connectivity. Proceed as follows:

1. Press the settings menu (C3);

2. Scroll through the pages until “Connectivity” is displayed;

3. Press “Next”;

4. Enable the Wi-Fi connection and remote control (via the De’Longhi Coee Link App);

5. The appliance PIN, needed to connect to the App, is displayed on the screen;

6. Press “<” to save the new selection and go back to the settings menu;

7. Press “X” to go back to the homepage (C).

On the homepage, the symbol (C4) indicating the connection status alternates with the other symbols (e.g. descaling, etc.)

Symbol on homepage Meaning

White symbol on grey

background

White symbol on blue

background

Red symbol on blue

background

White symbol on grey

background

No symbol

Please note:

• If the remote connection is o, a number of the App’s functions will not be available (e.g. drink preparation).

• If you change the name or password of the Wi-Fi network, or if you connect to a new Wi-Fi network, you will need to perform the reset procedure as described below:

1. Proceed as described above from point 1 to point 3;

2. Press “Reset”;

3. Press “OK” to conrm cancellation of the network settings;

4. Connect with the App again and select the new credentials.

Connectivity enabled: the machine is waiting for the rst connection

The appliance is connected

The appliance is connected to the home Wi-Fi, but there is no network

The cloud is not reachable

The connection is deactivated. To activate it, enter the Settings menu (C3)

6.4 Adjust grinder

The appliance proposes a tutorial on how to adjust grinding correctly for best results:

1. Press the settings menu (C3);

2. Scroll through the pages until “Adjust grinder” is displayed;

3. Press “Read more” to consult the tutorial on how to adjust the grinding coarseness.

Please note:

• After carrying out the above procedure, we recommend making at least 3 coees before adjusting again. If the coee is still not brewed correctly, repeat the procedure.

• The grinding coarseness regulator (A3) must only be turned when the coee grinder is in operation during the initial phase of coee preparation.

Bean Adapt Technology

We suggest you access Bean Adapt Technology in the Coee Link App to adjust this parameter to an appropriate setting for the coee beans used.

6.5 Coee temperature

To change the temperature of the water used to make the coffee, proceed as follows:

1. Press the settings menu (C3);

2. Scroll through the pages until “Coee temperature” is displayed;

3. Press “Set”;

4. Select the required temperature from those proposed;

5. Press “<” to save the new selection and go back to the settings menu.

6. Press “X” to go back to the homepage (C).

Please note:

Varying the temperature has most eect for long drinks.

Bean Adapt Technology

We suggest you access Bean Adapt Technology in the Coee Link App to adjust this parameter to an appropriate setting for the coee beans used.

6.6 Languages

To change the language on the homepage, proceed as follows:

1. Press the settings menu (C3);

2. Scroll through the pages until “Languages” is displayed;

3. Press “Next”;

4. Press the ag corresponding to the language you want to set (press “Next” or “Back” to display all the languages available). The display is immediately updated with the selected language;

5. Press “<” to save the new selection and go back to the settings menu;

6. Press “X” to go back to the homepage (C).

6.7 Create and edit proles

You can use this function to modify the image and colour of the icon for each prole. To customise the icon, proceed as follows:

1. Press the settings menu (C3);

2. Scroll through the pages until “Create and edit proles” is displayed;

3. Press “Next”;

4. To create a new prole, press “Add new”; To edit an existing prole, select the prole and press

“Edit”;

5. Customise as you wish, then press “Save” to conrm.

6. Press “X” to go back to the homepage (C).

6.8 Set auto-o

Auto-o can be set so that the appliance goes o after 15 or 30 minutes, or 1 or 3 hours of inactivity. To programme auto-o, proceed as follows:

1. Press the settings menu (C3);

2. Scroll through the pages until “Set auto-o” is displayed;

3. Select the desired time interval (15 or 30 minutes, or 1 or 3 hours).

4. Press “X” to save the new selection and go back to the homepage (C).

6.9 General

1. Press the settings menu (C3);

2. Scroll through the pages until “General” is displayed;

Here you can enable or disable the following functions with a simple touch:

- “Beep sound”: when enabled, the appliance beeps whenever an operation is performed.

- “Energy saving”: use this function to enable or disable energy saving. When enabled, the function reduces energy consumption in compliance with European regulations.

is displayed on the homepage to show it is active.

3. Press “X” to save the new selection and go back to the homepage (C).

6.10 Water lter

For instructions on the lter (D4), see section “18. Water softener lter””.

6.11 Water hardness

For instructions on setting water hardness, see section “17. Setting water hardness”.

6.12 Default values

This resets all menu settings and user customisation back to the default values (with the exception of the language, which remains as set, and the statistics). Proceed as follows:

1. Press the settings menu (C3);

2. Scroll through the pages until “Default values” is displayed;

3. Press “Next”:

4. Select whether you want to reset the entire appliance or a single prole, then press “Next”;

5. Follow the instructions, then conrm the reset by pressing “OK”.

6. Press “X” to go back to the homepage (C).

Please note:

When the appliance (not the individual prole) has been reset to the default values, the machine proposes the introductory tutorial again.

6.13 Drain water

To avoid the water in the circuit freezing if the appliance is to be left idle for a long period of time, or before taking it to customer services, we recommend emptying the water circuit. Proceed as follows:

1. Press the settings menu (C3);

2. Scroll through the pages until “Drain water” is displayed;

3. Press “OK” to start the guided procedure;

4. Extract, empty and replace the grounds container (A10) and drip tray (A14) (g. 10), then press “Next”;

5. Insert the spout (D6) on the connector (A8) (g. 5);

6. Position a 100 ml container under the spouts (g. 6). Press “Next”;

7. The appliance performs a rinse cycle with hot water from the spouts;

8. At the end of rinsing, extract the water tank (A22) (g. 11) and empty;

9. If present, remove the water softener lter (D4) from the water tank and press “Next”;

10. Put the empty water tank back in the appliance and press “Next”;

11. Wait for the appliance to empty the circuit; (Important: hot water from the spouts!). As the water circuit empties,

the appliance could become noisier. This is part of normal operation.

12. When the circuit is empty, extract and empty the drip tray, put back in the appliance and press “Next”;

13. Press “OK”. The appliance goes o (standby).

The next time the appliance is turned on, follow the instructions in section “3. Setting up the appliance”.

6.14 Statistics

This displays statistics relating to the machine. To view the statistics, proceed as follows:

1. Press the settings menu (C3);

2. Scroll through the pages until “Statistics” and the principal statistics are displayed. To view more information, press “Read more”;

3. Press “<” to go back to the settings menu.

7. DRINK SELECTION

You can use your machine to make a great variety of drinks.

the drinks indicated by this symbol are also available in

the “To Go” menu.

Hot Cold

Espresso

2X Espresso

Coee

Doppio+

Long

Americano

Coee pot

Cold Brew

Cold Brew Pot

Cold Brew to Mix

✓ ✓ ✓ ✓ ✓

✓

✕ ✕

✓

✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕

✓

✕ ✕

✓

✓ ✓

✕ ✕

Hot Cold

Coee

Cappuccino

Latte Macchiato

Caelatte

Cappuccino Mix

Espresso Macchiato

Flat White

Cappuccino +

Cortado

Milk

Tea function

Hot water

From the panel, access the type of drink you want to make (Hot, Cold, To Go-In Travel Mug) and t the necessary accessories.

8. MAKING COFFEE DRINKS U

8.1 Prepare the machine to make coee drinks

Important!

Do not use green, caramelised or candied coee beans as they could stick to the coee grinder and make it unusable.

1. Place 1

2. Lower the spouts as near as possible to the cup (g. 12).

or 2 cups under the coee spouts (A7)

This makes a creamier coee.

✕ ✕

✓

✓ ✓

✓

✓ ✓

✕ ✕

✕ ✕ ✕ ✕

✓

;

Cold Brew Latte

Cold Brew Cappuccino

✓

→

8.2 Directly selected drinks

1. Press the image on the homepage (C) corresponding to the coee you want to make (C1) (e.g. espresso, g. 13);

Espresso

2. Hot coee drink: the appliance starts preparation.

Cold Extraction Technology:

• Select the desired intensity: “Original” or “Intense”, then

press “Next”;

• Before delivery, the appliance suggests the quantity of

ice cubes. Add the quantity of ice cubes indicated to the glass (g. 14), then press “Brew”.

the quantity of ice cubes indicated to the glass (g. 14), then press “Brew”.

• The appliance starts preparation. A description of each individual phase (grinding, brewing coffee) appears on the display. At the end of preparation, the appliance is ready to make the next drink.

8.3 Customising the drinks

To make coee drinks with customised parameters, proceed as follows:

1. Press

Size

(C2) at the bottom of the image corresponding to the coee you want to make (e.g. espresso, g. 15). The parameters that can be customised according to taste appear on the display:

Espresso

• The appliance starts making the drink and a description of each individual phase (grinding, preparing and brewing coee) appears on the display.

Please note:

• Coee Extraction Technology is a slow extraction: therefore it will take some minutes.

• Before serving Cold Brew beverages, empty out the water tank, rinse thoroughly and rell with fresh potable water.

• When making Cold Brew drinks after hot preparations, the machine recommends a cold rinse to optimise the temperature of the drink. In this case, proceed making the rinse in a container or skip the tip.

Other cold coee drinks:

• Select to make an “Ice” or “Extra Ice” drink: press “Next”;

• Depending on the previous selection, before delivery, the appliance suggests the quantity of ice cubes. Add

Intensity

2. Hot coee drink: After setting the parameters, press

“Brew”. The appliance starts making the drink and a description of each individual phase (grinding, brewing coffee) appears on the display;

Cold Extraction Technology: Set the size, then press

“Start” and proceed as follows:

• Select the desired intensity: “Original” or “Intense”, then press “Next”;

• Before delivery, the appliance suggests the quantity of ice cubes. Add the quantity of ice cubes indicated to the glass (g. 14), then press “Brew”.

• The appliance starts making the drink and a description of each individual phase (grinding, preparing and brewing coee) appears on the display.

Please note:

• Coee Extraction Technology is a slow extraction: therefore it will take some minutes.

• Before serving Cold Brew beverages, empty out the water tank, rinse thoroughly and rell with fresh potable water.

Other cold coee drinks: Set the parameters, then press

“Start” and proceed as follows:

• Select whether to make an “Ice” or “Extra Ice” drink, then press “Next”;

• Depending on the previous selection, before delivery, the appliance suggests the quantity of ice cubes. Add the quantity of ice cubes indicated to the glass (g. 14), then press “Brew”.

• The appliance starts making the drink and a description of each individual phase (grinding, brewing coee) appears on the display.

3. At the end of delivery, press “Save” to save the new settings, or “Cancel” to retain the previous parameters.

Please note:

If you save the new settings, they are memorised ONLY in the selected prole.

4. Press “X” to go back to the homepage (C).

The appliance is ready to be used again.

8.4 Making coee using pre-ground coee

Important!

• Never add pre-ground coee when the machine is o or it could spread through the inside of the machine and dirty it. This could damage the machine.

• Never use more than 1 level measure (D2) as it could soil the inside of the coee machine or block the funnel (A4).

When using pre-ground coee, only one cup can be made at a time.

• Making Long coee: halfway through preparation, when requested by the appliance, add one level measure of preground coee and press “OK”.

• You cannot make Doppio+, 2x Espresso, Coee Pot, Cap- puccino+ and Cold Brew drinks using pre-ground coee.

1. Press (C2) at the bottom of the image corresponding to the coee you want to make (e.g. espresso, g. 15). The parameters that can be customised according to taste appear on the display;

2. Select the quantity and pre-ground coee

3. Press “Brew”;

4. Lift the pre-ground coee funnel lid, make sure the funnel (A4) is not blocked, then add one level measure (D2) of pre-ground coee (g. 16). Press “OK” to make the drink;

;

5. The appliance starts making the drink and a description of each individual phase (grinding, brewing coee) appears on the display.

At the end of preparation, the appliance is ready to make the next drink.

8.5 Bean Adapt Technology & Espresso SOUL

A coee expert at your ngertips to help you optimise coee brewing and the result in your cup in just a few steps. The smart technology guides you to adjust the machine according to the coee beans used - from grinding coarseness to brewing, each phase will be regulated to get the best results from the coee bean. Download and open the Coee Link App to nd out more. Once the settings have been saved in the “Bean Adapt Technology” section of the App, you can use the “Espresso SOUL” (C1) drink on the homepage (C). To make espresso coee, follow the instructions in section “8.2 Directly selected drinks”.

Please note:

You can modify the quantity of the “Espresso SOUL” drink as described in section “8.3 Customising the drinks”.

8.6 General indications for making coee drinks

• A quantity of water above level 1 is sucient to complete most drinks. Always lling above level 1 allows the appliance to estimate the amount of water available to make the drinks.

• While the machine is making the coee, preparation can be interrupted at any moment by pressing “Stop” or “Cancel”.

• As soon as delivery has ended, to increase the quantity of coee, just press “Extra”. When the required quantity is reached, press “Stop” or “Cancel”.

• Various alarm messages could be displayed while using the appliance (“Please ll the tank with fresh water up to MAX level” etc.). Their meaning is explained in section “20. Displayed messages”.

• Cold Extraction Technology: for best results when preparing Cold Brew beverages, ll the water tank with fresh potable water.

• If the coee is delivered a drop at a time, too weak and not creamy enough, or too cold, consult the tutorial on how to adjust grinding (see section “6.4 Adjust grinder”) and section “21. Troubleshooting”.

• If “Energy Saving” mode is activated, there may be a few seconds delay before the rst coee is delivered.

8.7 Tips for a hotter coee

To make a hotter coee, proceed as follows:

• perform a hot rinse cycle before making hot drinks (section “6.1 Rinsing”);

• warm the cups with hot water using the hot water function (see section “10. Preparing hot water and hot tea”);

• increase the coee temperature (section “6.5 Coee temperature”).

8.8 Coee / Cold Brew pot

Coee Pot and Cold Brew Pot are two coee drinks to enjoy in company; Coee Pot is based on Espresso, light and balanced, with a ne layer of crema; Cold Brew Pot is based on the Cold Brew drink, for a refreshing moment to share.

Optional accessory in certain models:

Pot (capacity 1 litre)

Type: DLSC021

EAN: 8004399333642

To make the drink, proceed as follows:

1. On the homepage (C), press the image corresponding to the “Pot” drink you desire (C1);

2. Selection the number of cups to make and the desired intensity;

Number

of cups

* The quantities indicated are approximate and may vary ac-

3. Press “Start” to move on to the next step;

4. Hot Coee Pot:

Number of

grindings

2 2 250 240

3 3 375 360

4 4 500 480

5 5 625 600

6 6 750 720

cording to the type of coee.

• Fill the tank (A22) with water and ll the beans contain-

er (A2) as instructed on the display (g. 17).

Total quantity (ml)*

Coee Pot Cold Brew Pot

• Once you have made sure there is sucient water and coee for the drinks you want to prepare, press “Next”;

Cold Brew Pot:

Please note:

Before serving Cold Brew beverages, empty out the water

tank, rinse thoroughly and rell with fresh potable water.

• Select the desired intensity: “Original” or “Intense”, then press “Next”;

• Fill the tank (A22) with water and ll the beans container (A2) as instructed on the display (g. 17).

• Once you have made sure there is sucient water and coee for the drinks you want to prepare, press “Next”;

5. Place the coee pot (D8) under the coee spouts (A7). Press “Brew”;

6. The appliance starts making the drink with an appropriate number of grindings for the number of cups to be prepared and a description of each individual phase (grinding, brewing coee) appears on the display.

Please note:

“Cancel” or “Stop”: press to stop preparation completely and go back to the homepage.

7. When delivery has ended, press “Save” to save the new settings, or “Cancel” to retain the previous parameters.

8. Press “X” to go back to the homepage (C).

The appliance is ready to be used again.

Please note:

If you save the new settings, they are memorised ONLY in the selected prole.

SAFETY WARNING:

After making a pot of hot coee, leave the appliance to cool for 5 minutes before making another drink. Risk of overheating!

8.9 Cleaning the coee pot

After each use, you should clean the coee pot (D8) with hot water and mild washing up liquid.

Rinse thoroughly with hot water to eliminate all detergent residues. The coee pot is dishwasher safe.

9. MAKING MILK DRINKS U

9.1 Preparing the milk carafes (E and F)

Please note:

To avoid milk with poor froth or large bubbles, always clean the milk carafes as described in sections “9.6 Cleaning the milk carafe after use” and “15.10 Cleaning the milk carafes (E) and (F)”.

9.2 Which milk to use?

The quality of the froth will vary depending on:

• the temperature of the milk or plant-based drink (for best results, always use milk or plant-based drinks at refrigerator temperature (5°C);

• type of milk or plant-based drink;

• brand used;

• ingredients and nutritional value.

Cow’s milk

Whole (fat content >3.5%)

Partially skimmed (fat content between

1.5 and 1.8%)

Skimmed (fat content < 0.5%)

✓

Plant-based drinks

Soy

Almond

Oat

✓ ✓ ✓ ✓ ✓ ✓

9.3 Filling and attaching the milk carafes

1. Lift the lid (E1) or (F1) (g. 18);

3. Make sure the milk intake tube (E6) or (F6) is correctly inserted on the bottom of the milk carafe lid (g. 20);

20 21

4. Put the lid back on the milk carafe;

5. Attach the carafe to the connector (A8) and push as far as it will go (g. 21). The machine emits a beep (if the function is enabled);

6. Place a suciently large cup under the coee spouts (A7) and milk spout (E5) or (F5). Only the milk spout (E5) can be lengthened by adjusting the extension;

7. Select the drink you want to make as described in the following paragraphs.

Please note:

If “Energy Saving” mode is enabled (see section “6.9 General”), you may have to wait a few seconds before the appliance makes the drink.

9.4 Adjusting the amount of froth

Turn the froth adjustment dial (E3) or (F3) to adjust the amount of froth on the milk delivered while making milk drinks.

Dial position

MIN

froth

MED froth

• Caelatte

• Hot milk (not

• Latte

• Flat White

• Cortado

Hot

frothed)

Macchiato

Recommended for…

-- • Caelatte

• Cold Brew Latte

Cold

• Latte Macchiato

• Flat White

18 19

2. Fill the milk carafe (E2) or (F2) with a sucient quantity of milk, not exceeding the MAX level marked on the carafe (g. 19);

MAX

froth

• Cappuccino

• Cappuccino Mix

• Espresso Macchiato

• Cappuccino +

• Hot milk (frothed)

• Cold Brew Cappuccino

• Cappuccino

• Cappuccino Mix

• Cold milk (frothed)

9.5 Making milk drinks

On the homepage (C), press the image corresponding to the drink you want to make (C1). As for coee drinks, you can make a customised drink by press-

ing the

(C2) symbol at the bottom of the image on the

homepage.

9.6 Cleaning the milk carafe after use

Each time you deliver a milk drink, the appliance asks you to perform the CLEAN function to clean the milk carafe lid (E1) or (F1). To start cleaning, proceed as follows:

1. Leave the milk carafe in the machine (you do not need to empty it);

2. Place a cup or other recipient under the milk spout (E5) or (F5) (g. 22);

Clean

At the end of preparation, there is enough milk left in the carafe for other drinks

• After cleaning using the “Clean” function, extract the milk carafe and place it immediately in the refrigerator. The “HOT” carafe more than 2 days; the “COOL” carafe

can be kept in the refrigerator for no

can be kept in the refrigerator for no more than 1 day: then all the components should be cleaned as described in section “15.10 Cleaning the milk carafes (E) and (F)”.

Important:

If the milk carafe has been left out of the refrigerator for more than 30 minutes, disassemble and clean all the components as described in section “15.10 Cleaning the milk carafes (E) and (F)”.

General notes after making milk drinks:

• If you do not clean the milk carafe, the

symbol appears

on the homepage to remind you that it needs cleaning.

• In certain cases, the appliance will need to warm up before the carafe can be cleaned.

• To ensure correct cleaning, wait for the CLEAN function to end. The function is automatic. It must not be interrupted while underway.

10. PREPARING HOT WATER AND HOT TEA U

10.1 Preparing the appliance

1. Insert the hot water spout (D6) in the machine (g. 5);

2. Place a cup under the spout;

To use tall glasses:

• lift the ap (A16) (g. 24) and place the glass in the compartment (A15);

• turn the water spout (g. 25).

22 23

3. Turn the froth adjustment/clean dial (E3) or (F3) to “Clean” (g. 23). Hot water and steam are delivered from the milk spout. Cleaning stops automatically;

4. Turn the dial back to one of the froth selections;

If you want to make a number of drinks in succession:

• To proceed with making the next drinks, when the “Clean” message is displayed, press “Cancel”. Clean the milk carafe after making the last drink.

At the end of preparation, the milk carafe is empty, or there is not enough milk for other drinks

• After cleaning using the “Clean” function, extract the milk carafe and clean all the components as described in section “15.10 Cleaning the milk carafes (E) and (F)”

24 25

10.2 Making hot tea

1. On the homepage (C), press the image corresponding to tea (C1);

2. Adjust the quantity and temperature;

3. Press “Brew”. Preparation begins and stops automatically.

Please note:

• To stop brewing, press “Stop” or “Cancel”.

• As soon as delivery has ended, to increase the quantity of water, just press “Extra”. When the required quantity is reached, press “Stop” or “Cancel”.

10.3 Preparing hot water

Direct selection:

1. On the homepage (C), press the image corresponding to hot water (C1). Preparation begins and stops automatically.

Customising the quantity:

1. Press

2. Press “Brew”. Preparation begins and stops automatically.

Please note:

• To stop brewing, press “Stop” or “Cancel”.

• As soon as delivery has ended, to increase the quantity

(C2) at the bottom of the image corresponding

to hot water: the quantity to select appears on the display;

of water, just press “Extra”. When the required quantity is reached, press “Stop” or “Cancel”.

11. FAVOURITE DRINKS U

A collection of favourite drinks can be created for each prole. Proceed as follows:

1. Press

(C2) at the bottom of the image corresponding

to the drink you want to include in the collection;

Espresso

Size L

Intensity 4

2. Select the heart (g. 26):

3. Press “X” to go back to the homepage (C).

The drink is now included in the collection and can be accessed by pressing Favourites (B4) from the control panel (B).

Please note:

The order of drinks in the collection can be changed:

1. Press

2. Select the drink to be moved;

3. Use the arrows to change the order of the drinks;

4. Press “X” to go back to the homepage (C).

;

12. MAKING “TO GO” DRINKS U

The “To Go” function is perfect for all those wanting to create a customised drink to take away with them.

Optional accessory in certain models:

Travel mug (capacity 473 ml/160 mm H)

Type: DLSC073

EAN: 8004399024083

1. Prepare the machine with the accessories needed to prepare the drink you want to make (E, F);

2. Raise the ap (A16) (g. 24) and place the travel mug in the compartment (A15) (g. 27);

3. Press “To Go” (B2);

The rst time you use the function:

• Press “Start”;

• Pressing corresponding to the size of the travel mug;

• Select the size of travel mug you are using (Piccolo, Medio, Grande) and press “Next”;

• The appliance informs you that at the end of preparation, you can adjust the quantity to save the exact capacity of your mug. Press “Next”.

4. Select the type of drink you want to make (Hot (B3) or Cold (B1));

5. Scroll through the drinks on the homepage (C) until the one you want to make is displayed. Select the drink and customise the parameters proposed by the appliance. Proceed with preparation;

6. At the end of preparation, you can correct the quantity delivered so the next time the machine will make the right amount of drink for the travel mug you are using.

Please note:

• Each time you use a mug dierent from the one used previously, we recommend you remain nearby to check the quantity of drink delivered.

• If you save the new settings, they are memorised ONLY in the selected prole.

• To maintain the temperature of hot drinks, preheat the travel mug with hot water.

displays information on the quantities

• You should only use the travel mug for the drinks present on the homepage.

• To use a travel mug other than the one supplied, make sure it is no taller than 16 cm.

Important

• Before screwing on the lid, open the closing cap to release the pressure;

• Drinks with milk: at the end of preparation, clean the milk carafe (see section “9.6 Cleaning the milk carafe after use”).

• You should use the contents within a maximum of 2 hours. After that time, empty and clean as described in the following section.

• For more information, see the leaet attached to the travel mug.

12.1 Cleaning the travel mug after use

For hygiene reasons, the travel mug (D9) should always be cleaned after use. Do not use abrasive materials that could damage the surface of the container. Proceed as follows:

1. Unscrew the lid and rinse the container and lid with hot drinking water (40°C).

2. Soak the components in hot water (40°C) with washing up liquid for at least 30 minutes. Do not use scented detergents.

3. Clean the inside of the container and the lid with a clean sponge and washing up liquid, removing any visible dirt.

4. Rinse all components with hot drinking water (40°C).

5. Dry all components with a clean, dry cloth or paper towels, then reassemble.

6. Wash the lid in the dishwasher once a week. The metal container is not dishwasher safe

13. “MY” FUNCTION (“Hot” drinks only) U

With the “my function”, you can customise the drink as follows:

1. Make sure the prole (C6) whose drink you want to customise is active;

2. Press

3. Press ;

4. Press “Start” to follow the guided procedure;

5. If envisaged by the drink, select the desired Intensity and

6. Press “Brew” to begin preparation;

7. When the required quantity has been delivered into the

8. If you are satised with the result in the cup, press “Save”

9. Press “X” to go back to the homepage.

The appliance goes back to the homepage (C).

(C2) at the bottom of the image corresponding

to the drink you want to make;

press “Next”;

cup, press “Stop”.

to save the settings, or “Cancel” to retain the previous parameters.

Please note:

• If you save the new settings, they are memorised ONLY in the selected prole.

• When you customise a single drink, the respective double version is also customised and the appliance displays the message “Settings saved on both double and single drink”;

• Press “X” to exit programming at any moment. The values will not be saved.

• When a drink has been customised, “Reset” (under the image) and “my” (among the quantity selections) appear in the settings. Press “Reset” to reset the default values for the drink.

Drink quantity table

Drink Standard

quantity

ESPRESSO 40 ml 20-180 ml

2X ESPRESSO 40 ml + 40 ml 20-180 ml +

COFFEE 180 ml 100-270 ml

LONG 160 ml 115-250 ml

DOPPIO+ 120 ml 80-180 ml

AMERICANO 150 ml 70-480 ml

TEA 150 ml 20-420 ml

HOT WATER 250 ml 20-420 ml

Programmable quantity

20-180 ml

14. SELECTING YOUR PERSONAL PROFILE U

You can memorise a number of dierent proles, each associated with a dierent icon. The customised drink settings are saved in each prole. The order in which all the drinks are displayed is based on the frequency of selection. To select a prole, proceed as follows:

1. From the homepage (C), press the prole currently in use (C6). A list of selectable proles appears;

2. Then select the required prole.

Please note:

• After making your selection, the drink settings bars will all appear in the same colour as the prole;

• You can rename your prole;

• To customise the prole icon, see section “6.7 Create and edit proles”.

15. CLEANING U

15.1 Cleaning the machine

The following parts of the machine must be cleaned regularly:

- the appliance’s internal circuit;

- coee grounds container (A10);

- drip tray (A14) and drip tray grille(A13);

- water tank (A22);

- coee spouts(A7);

- pre-ground coee funnel (A4);

- brewing unit (A6), extractable after opening the brewing unit ap (A5);

- milk carafes (E) and (F)

- coee pot (D8) (see section “8.9 Cleaning the coee pot”);

- travel mug (D9) (see section “12.1 Cleaning the travel mug after use”).

Important!

• Do not use solvents, abrasive detergents or alcohol to clean the coee machine. With De’Longhi superautomatic coee machines, no chemical products are required for cleaning purposes.

• Do not use metal objects to remove encrustations or coee deposits as they could scratch metal or plastic surfaces.

dishwasher safe hand wash only

drip tray (A14) coee grounds container

(A10)

door grille support (A17) cup tray (A12)

drip tray grille (A13) ap grille (A17)

“Hot” milk carafe (E) water tank (A22)

“Cool” milk carafe (F) removable brewing unit (A6)

15.2 Cleaning the internal circuit

If the appliance is not used for more than 3/4 days, before using it again, we strongly recommend switching it on and performing 2/3 rinse cycles by selecting the “Rinse” function (section “6.1 Rinsing”).

Please note:

After cleaning, it is normal for the grounds container (A10) to contain water.

15.3 Cleaning the coee grounds container

When “Please empty grounds container” appears on the display, the grounds container must be emptied and cleaned. The appliance cannot be used to make coee until you have cleaned the grounds container (A10). Even if not full, the empty grounds container message is displayed 72 hours after the rst coee has been prepared. For the 72 hours to be calculated correctly, the machine must never be disconnected from the mains power supply.

Important! Danger of scalding

If you make a number of milk-based drinks one after the other, the metal cup tray (A12) becomes hot. Wait for it to cool down before touching it and handle it from the front only. To clean (with the machine on):

1. Remove the drip tray (A14) and grounds container (A10) (g. 28);

2. Empty the drip tray and grounds container and clean thoroughly to remove all residues left on the bottom. This can be done using the spatula on the brush (D5) provided.

3. Put the drip tray complete with grille and grounds container back in the appliance.

Important!

• When removing the drip tray, the grounds container must be emptied, even if it contains only a few grounds. If this is not done, when you make the next coees, the grounds container will ll up more than expected and clog the machine.

• The grounds container on certain models is made up of two distinct parts: after cleaning, reassemble the parts before returning the container to the machine.

15.4 Cleaning the drip tray and drip tray grille

Important!

The drip tray (A14) is tted with a level indicator (A19) (red) showing the amount of water it contains (g. 29).

Before the indicator protrudes from the cup tray (A12), the drip tray must be emptied and cleaned, otherwise the water may overow the edge and damage the appliance, the surface it

rests on or the surrounding area. To remove the drip tray, proceed as follows:

1. Remove the drip tray and coee grounds container (A10) (g. 28);

2. Check the red condensate tray (A11) and empty if full;

3. Remove the cup tray (A12) and drip tray grille (A13), then empty the drip tray and grounds container and wash all components;

4. Put the drip tray complete with grille and grounds container back in the appliance.

Important!

When removing the drip tray, the grounds container must be emptied, even if it contains few grounds. If this is not done, when you make the next coees, the grounds container will ll up more than expected and clog the machine.

15.5 Cleaning the inside of the machine

Danger of electric shock!

Before cleaning internal parts, the machine must be turned o (see section “5. Turning the appliance o”) and unplugged from the mains power supply. Never immerse the machine in water.

1. Check regularly (about once a month) that the inside of the appliance (accessible after removing the drip tray (A14)) is not dirty. If necessary, remove coee deposits with the brush (D5) supplied and a sponge.

2. Remove all residues with a vacuum cleaner (g. 30).

4. (models with water softener lter only) — deliver 100ml of hot water to reactivate the lter.

Please note:

If the appliance is not used for more than 3-4 days, you should clean the tank as described above.

15.7 Cleaning the coee spouts

1. Clean the coee spouts (A7) regularly with a sponge or cloth (g. 32);

15.6 Cleaning the water tank

Clean the water tank periodically (about once a month) and whenever the softener lter (D4) in the water tank (A22) is replaced.

1. Take out the water tank (g. 2), remove the water softener lter (if installed) and rinse with running water;

2. Empty the water tank and clean with hot water, if necessary with the aid of a clean, non-abrasive cloth. Rinse thoroughly with water;

3. Reinstate the lter (g. 31), ll the tank with fresh potable water up to the MAX level (g. 3) and reposition the tank in the machine;

32 33

2. Check the holes in the coee spouts are not blocked. If necessary, remove coee deposits with a toothpick (g. 33).

15.8 Cleaning the pre-ground coee funnel

Clean the pre-ground coee funnel (A4) regularly (about once a month) with a damp cloth. Proceed as follows:

1. Turn the machine o (see chapter “5. Turning the appliance o”;

2. Open the funnel ap;

3. Clean the funnel with the brush provided (D5);

4. Close the ap.

Important!

After cleaning, make sure there are no accessories left in the funnel. The presence of foreign objects in the funnel while the machine is in operation could damage the appliance.

15.9 Cleaning the brewing unit

The brewing unit (A6) must be cleaned at least once a month.

Important!

The brewing unit cannot be extracted while the machine is on.

1. Make sure the machine is correctly turned o (see section “5. Turning the appliance o”);

2. Remove the water tank (A22) (g. 2);

3. Open the brewing unit ap (A5) (g. 34) on the right side of the appliance;

15.10 Cleaning the milk carafes (E) and (F)

Each time you use the milk carafe, clean as described below:

1. Extract the lid of the milk carafe (E1) or (F1) (g. 18);

2. Extract the milk spout (E5) or (F5), milk spout extension (E7) (“Hot” carafe only) and milk intake tube (E6) or (F6) (g. 37);

PUSH

34 35

4. Press the two coloured release buttons inwards and at the same time pull the brewing unit outwards (g. 35);

5. Soak the brewing unit in water for about 5 minutes, then rinse under the tap;

Important!

RINSE WITH WATER ONLY NO DETERGENTS  NO DISHWASHER

6. Do not use detergents when cleaning the brewing unit, as they could damage it.

7. Use the brush (D5) to remove any coee residues left in the brewing unit housing, visible through the brewing unit ap;

8. After cleaning, replace the brewing unit by sliding it onto the internal support, then push the PUSH symbol fully in until it clicks into place;

Please note:

If the brewing unit is dicult to insert, before insertion, adapt it to the right size by pressing the two levers (g. 36).

9. Once inserted, make sure the two coloured buttons have snapped out;

10. Close the brewing unit ap;

11. Put the water tank back.

37 38

3. Turn the froth adjustment dial (E3) or (F3) clockwise to the “Insert” position (g. 38) and pull to extract;

4. Turn anticlockwise and remove the milk carafe connector (E4) or (F4) (g. 39).

5. Wash in a dishwasher (recommended) or by hand as indicated below:

• In a dishwasher: Rinse all the above components and the milk carafe with hot running drinking water (at least 40°C), then place them in the top basket of the dishwasher and run a programme at 50°C, e.g. standard ECO.

• By hand: Thoroughly rinse all the components and the milk carafe with hot running drinking water (at least 40°C) to remove all visible milk residues; make sure to run the water through the holes in the lid (g. 40). Then immerse all the components in hot drinking water (at least 40°C) and wash ing up liquid for at least 30 minutes. Rinse all the above components thoroughly under hot drinking water, rubbing them one at a time with your hands.

6. Make sure there are no milk residues on the hollow and groove under the dial (g. 41). groove with a toothpick;

If necessary,

scrape the

6. Remove and empty the drip tray (A14) and coee grounds

container (A10) (g. 10), then put both back in the appliance and press “Next”;

7. Remove the water tank (A22), lift the lid (A21) and (if inserted) remove the lter (D4). Empty the tank completely.

8. Pour the descaler into the tank up to the level A marked inside the tank (equal to one 100ml pack), then add water (one litre) up to level B (g. 42). Put the water tank (with lid) back in the appliance and press “Next”

;

4140

7. Check that the intake tube and spout are not clogged with milk residues;

8. Dry all the components with a clean dry cloth;

9. Reassemble all the lid components;

10. Attach the lid back on the milk carafe.

Please note:

Each week the appliance reminds you to clean the milk carafe thoroughly and proposes the correct cleaning sequence again.

16. DESCALING U

Important!

• Before use, read the instructions and labelling on the descaler pack.

• Use De’Longhi descaler only. Using unsuitable descaler and/or performing descaling incorrectly may result in faults not covered by the manufacturer’s guarantee.

• Descaler could damage delicate surfaces. If the product is accidentally spilt, dry immediately.

To descale

Descaler De’Longhi descaler

Container Recommended capacity: 2 l

Time ~50min

Descale the appliance when the corresponding message appears on the homepage (C). To descale immediately, press “OK” and follow the instructions from point (5). To descale the appliance later, press “Cancel”. The

symbol (C4) appears on the homepage to remind you the appliance needs descaling. (The message appears each time you turn the appliance on). To access the descaling menu:

1. Press the settings menu icon (C3) on the homepage;

2. Scroll through the menu items until “Descaling” is

displayed;

3. Press “Start” to enter the guided descaling procedure;

4. Press “Start” to begin;

5. Insert the water spout (D6) (g. 5);

9. Place an empty 2 litre container under the spouts (g. 43). Press “Next” to start descaling (“Back” to go back to the previous screen or “X” to exit the procedure, remembering to remove the descaling solution from the tank)

Important! Danger of scalding

Hot water containing acid ows out of the spouts. Take care to avoid contact with splashes of this solution.

10. The descale programme starts and the descaler liquid comes out of the hot water and coee spouts. A series of rinses is performed automatically to remove all the scale residues inside the coee machine;

After about 40 minutes, the descaling action ceases;

11. The appliance is now ready to be rinsed through with clean water. Empty the container used to collect the descaler solution. Remove the water tank, empty, rinse under running water, ll with fresh water up to the MAX level and put back in the appliance (g. 44). Press “Next”;

4342

12. Place the container used to collect the descaler solution empty under the spouts and press “Next” to start rinsing;

13. Hot water is delivered from both the hot water spout and coee spouts;

14. When the water in the tank has run out, empty the con tainer used to collect the rinsing water;

15. Extract the water tank and put back the water softener l ter if removed previously. Press “Next” to continue;

16. Fill the tank with fresh water up to the MAX level, put back in the appliance and press “Next” to continue;

17. Place the container used to collect the descaler solution empty under the spouts

and press “Next” to start another

rinsing cycle;

18. When the water in the tank has run out, empty the con tainer used to collect the rinsing water, remove and empty the drip tray (A14) and grounds container

(A10), then put

back in the appliance;

19. Extract the water tank, top up to the max level, put back in the appliance and press “Next”

20. The descaling process is now complete”. Press “OK”. The ap pliance performs a rapid preheat cycle and then goes back to the homepage.

Please note:

• If the descaling cycle is not completed correctly (e.g. elec trical power failure) the appliance will request to complete it next time you switch it on;

• After descaling, it is normal for the grounds container (A10) to contain water.

• If the water tank has not been lled to the MAX level after descaling, the appliance prompts for a third rinse to ensure that the descaler solution has been completely eliminated from the machine’s internal circuits. Before starting rins ing, remember to empty the drip tray.

17. SETTING WATER HARDNESS

The descaling alarm is displayed after a period of time established according to water hardness. The machine can also be programmed according to the actual hardness of the local water supply, so that the descaling procedure will be required less frequently.

17.1 Measuring water hardness

1. Remove the “Total hardness test” indicator paper (D1) from its pack (in the welcome box).

2. Immerse the paper completely in a glass of water for about one second.

3. Remove the strip from the water and shake lightly. After about a minute, 1, 2, 3, or 4 red squares appear, depending on the hardness of the water. Each square corresponds to 1 level.

17.2 Setting water hardness

1. Press the settings menu icon (C3) on the homepage (C);

2. Scroll the pages and select “Water hardness”;

3. Press “Set”;

4. Carry out the procedure described in the previous section

and measure water hardness;

5. Press the dot corresponding to the water hardness measured previously as indicated in the following table:

Total Hardness Test (D1) Water hardness

Green Red

Red

Level 1

Level 2

Level 3

Level 4

6. The machine is now reprogrammed with the new water hardness setting.

7. Press “<” to go back to the settings menu.

18. WATER SOFTENER FILTER

Certain models are tted with a water softener lter (D4). If this is not the case with your model, you are recommended to purchase one from De’Longhi Customer Services. To use the lter correctly, follow the instructions below.

18.1 Installing the lter

1. Press the settings menu (C3);

2. Scroll through the pages and select “Water lter”;

3. Press “OK” to enter the guided procedure

4. Remove the lter from the packaging and turn the date indicator to view the next 2 months (g. 45);

0,5 L

45 46

Please note:

The lter lasts about two months if the appliance is used normally. If the machine is left unused with the lter installed, it will last a maximum of 3 weeks.

5. Press “Next” to continue (“Back” to go back to the previous screen; “X” to cancel the operation);

6. To activate the lter, run tap water through the hole in the centre of the lter until water comes out of the openings at the side for more than a minute (g. 46). Press “Next”;

47 48

7. Extract

8. Insert the lter in the lter housing

9. C

10. Insert the hot water spout (D6). Press “Next”;

11. Position an empty container with a minimum capacity of 0.5

12. The appliance delivers hot water, then stops automatically.

13. The lter is now active and you can use the coee machine.

18.2 Replacing or removing the lter

Replace the lter (D4) when the replace lter message appears on the homepage (C). To replace the lter immediately, press “OK” and follow the instructions from point 3 of the previous section. To replace the lter later, press “Cancel”. The lter symbol appears on the display to remind you the lter needs replacing. To replace, proceed as follows:

1. Press the settings menu (C3);

2. Scroll through the pages until “Water lter“ is displayed, then

3. Press “OK” to enter the guided procedure;

4. Extract the water tank (A22) and exhausted lter.

the water tank (A22) (g. 2) and ll with water; insert the lter in the water tank and immerse it completely for about ten seconds, sloping it and pressing it lightly to enable the air bubbles to escape (g. 47). Press “Next”;

(g. 48) and press as far as

it will go;

press “Next”;

lose the tank with the lid (A21), then put the tank back in

the machine.

litres under the hot water spout (g. 6) and press “Next” to activate the lter;

Press “OK” to go back to the homepage;

press “OK”;

5. To remove the lter, press “OK” (“Back” to go back to the previous screen; “Cancel” to cancel the operation);

6. To replace the lter, press “Next” and follow the operations described in the previous section from point (4).

Please note:

After two months (see date indicator) or when the appliance has not been used for 3 weeks, you should replace the lter even if the message has not yet been displayed.

19. TECHNICAL DATA

Voltage: 220-240 V~ 50-60 Hz max. 10 A Power: 1450 W Pressure: 1.9 MPa (19 bars) Water tank capacity: 1.8 l Size LxDxH: 260x450x385 mm Cord length: 1200 mm Weight (varies according to model): 11.2 kg Beans container capacity: 300 g Frequency: 2400/2500 MHz

Maximum transmission power 20 mW

De’Longhi reserves the right to modify the technical specication and styling of its products at any moment, without compromising their functionality and quality.

19.1 Tips for Energy Saving

• To reduce energy consumption, after delivering one or more drinks, remove the milk carafes or accessories.

• Set auto-o to 15 minutes (see section

• Enable Energy Saving (see paragraph “6.9 General”);

• Always carry out the descaling cycle when prompted by the machine.

“6.8 Set auto-o ”);

20. DISPLAYED MESSAGES

DISPLAYED MESSAGE MEANING SOLUTION

(A22)

Please ll the tank with fresh water up to MAX level. Be sure to ll above Level 1

I don’t have enough water for your drink. Please ll the tank with fresh water up to MAX level. Be sure to ll above Level 1

Please insert the water tank

Fill the tank with fresh water. Please empty drip tray and grounds container

Insucient water in the tank

The tank

(A22)

is not correctly in place. Insert the tank correctly and press as far as it

The amount of water in the tank is not enough to make the drink and the message to empty the grounds container will be displayed shortly.

. Take out the tank, ll with fresh potable

water to above Level 1, and reposition in the machine.

will go.

The appliance asks for both operations to be performed so that no further intervention will be necessary and more drinks can be made one after the other without interruption.

Please insert the brewing unit

Please empty grounds container

Please insert grounds container and drip tray

Please add your preferred pre-ground coee. - max: one measure!

Fill the beans container and press “OK” to resume brewing

Please insert the water spout The spout (D6) is not correctly in place or

Please insert the cold/hot milk carafe

Just doing a little cleaning. I’ll be back in a few seconds

The brewing unit (A6) has not been replaced after cleaning.

The grounds container (A10) is full. Clean as described in section “15.3 Cleaning

The grounds container (A10) and/or drip tray (A14) is not correctly in place or is missing.

Preparation with pre-ground coee has been selected.

The coee beans have run out. Fill the beans container (A2) and press “OK” to

is missing.

The milk carafe (E) or (F) is not inserted correctly or is missing.

The appliance has detected impurities in its internal circuits.

Insert the brewing unit as described in section “15.9 Cleaning the brewing unit”

the coee grounds container”

Insert the drip tray complete with grounds container and press as far as it will go.

Make sure the funnel (A4) is not blocked, then add one level measure (D2) of pre-ground coee, press “Next” on the display and follow the instructions in section “8.4 Making coee using pre-ground coee”.

resume brewing

Insert the spout and push as far as it will go (g. 5). The appliance emits a beep (if the beep function is enabled).

Insert the milk carafe and push as far as it will go. The machine emits a beep (if the beep function is enabled).

Wait for the appliance to be ready again and reselect the required drink. Contact customer services if the problem persists.

→

DISPLAYED MESSAGE MEANING SOLUTION

The new settings have not been saved

I am unable to complete your drink. Reduce the intensity and try again

I am unable to complete your drink. Adjust the coee grinder, increasing the dial position one unit at a time

Please select a lighter intensity or reduce pre-ground coee quantity

Please store the milk carafe in the fridge

The machine needs to be descaled. Press OK to start (~50min)

The process has been interrupted. Please press Ok to continue

Please replace the water lter. Press OK to start

General alarm: Please refer to user manual / Coee Link App

While customising the drinks (see section “13. “My” function (“Hot” drinks only)”), preparation has been deliberately interrupted by pressing “X” or an alarm has been triggered.

The grinding is too ne and the coee is delivered too slowly or not at all.

If the water softener lter (D4) is present, an air bubble may have been released inside the circuit, obstructing delivery.

The grinding is too ne and the coee is delivered too slowly or not at all.

Too much coee has been used. Select a milder “Intensity” (see “8.3 Customis-

A milk-based drink has been prepared and the milk carafe is still inserted in the appliance

The machine must be descaled. To proceed with descaling, press “OK” and

Descaling process interrupted or not correctly completed

The water softener lter (D4) is exhausted. Press “OK” to replace or remove the lter,

The inside of the appliance is very dirty. Clean the inside of the appliance thoroughly,

Press “X” to go back to the homepage (C) to view the alarm causing the interruption. Follow the instructions corresponding to the alarm displayed (see section “20. Displayed messages”)

Select a milder “Intensity” (see “8.3 Customising the drinks”)

Press “OK” and deliver a little water (see section “10. Preparing hot water and hot tea”) until the ow is regular. If the problem continues, remove the lter (see section “18.2 Replacing or removing the lter”)

Press “OK” and adjust the coee grinder (see “6.4 Adjust grinder”).

ing the drinks”) or reduce the quantity of preground coee (maximum 1 measure). Press “OK to go back to the homepage or wait until the message disappears.

Remove the carafe and place in the refrigerator.

follow the guided procedure, otherwise press

“Cancel”. In this case, the appears on the homepage (C) to remind you that descaling is needed (see section “16. Descaling”).

Press Ok to continue (see section “16. Descaling”).

or “Cancel” to carry out the procedure later. Follow the instructions in section “18. Water softener lter”.

as described in section “15. Cleaning”. If the message is still displayed after cleaning, contact De’Longhi Customer Services and/or an approved Service Centre

symbol (C4)

→

DISPLAYED MESSAGE MEANING SOLUTION

Water circuit empty. Press OK to start lling process

The coee beans prole has changed! Remember to brew at least 3 coees before changing the coee beans prole

For an optimal temperature Please start a quick rinse to cool me down a bit. Place a 0,2L container under the spouts and press Start

For an optimal temperature Please start a quick rinse to heat me up a bit. Place a 0,2L container under the spouts and press Start

The water circuit is empty Press “OK” to ll the circuit. Delivery stops au-

A new water softener lter has been inserted (D4)

The appliance needs to brew at least 3 coffees before Bean Adapt can be adjusted

You want to prepare a “cold brew technology” drink after preparing several hot drinks.

You want to prepare a hot drink after preparing “cold brew technology” drinks.

Energy saving is enabled. To disable energy saving, proceed as described

The machine must be descaled. The descaling procedure described in section

tomatically. It is normal for there to be water in the drip tray (A14) after lling. If the problem persists, make sure the water tank (A22) is fully inserted.

Make sure you have followed the instructions for inserting the new lter (sections “18.1 Installing the lter” and “18.2 Replacing or removing the lter”). If the problem continues, remove the lter (section “18.2 Replacing or removing the lter”).

Brew at least 3 coees with the new coee before changing the Bean Adapt

Put a container under the coee spouts and press “Start” for a quick cold rinse to cool the coee circuit or press “Skip” to directly brew the desired drink.

Put a container under the coee spouts and press “Start” for a quick hot rinse to heat the coee circuit up or press “Skip” to directly brew the desired drink.

in section “6.9 General”.

“16. Descaling” needs to be performed.

The lter must be replaced (D4) Replace the lter or remove it as described in

section “18. Water softener lter”.

Remember to clean the milk carafe (E) or (F).

The connection is congured in the appliance settings menu (C3).

Indicates that the appliance is connected. To disable the connection, proceed as de-

Turn the froth adjustment dial (E3) or (F3) to CLEAN

Connect to the Coee Link App.

scribed in section “6.3 Connectivity”.

→

DISPLAYED MESSAGE MEANING SOLUTION

Connectivity is active, but the cloud cannot be reached.

If just turned on, wait for the appliance to complete the start up procedure.

If the problem continues, disable the connection then enable again as described in section “6.3 Connectivity”.

Make sure the lights on the router indicate that the network is active.

If the problem continues, turn the appliance and home router o then on again.

21. TROUBLESHOOTING

Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact customer services.

PROBLEM POSSIBLE CAUSE SOLUTION

The appliance does not come on It is not plugged into the mains socket. Plug into the mains socket (g. 1).

The coee is not hot. The internal circuits of the appliance have

cooled down because 2-3 minutes have elapsed since the last coee was made.

Coee temperature setting too low.

The cups were not preheated. Warm the cups by rinsing them with hot

The machine must be descaled

The coee is weak or not creamy enough. The coee is ground too coarsely. Access the settings menu (C3) and follow

The coee is unsuitable. Use coee for espresso machines.

Coee not fresh. The coee pack has been opened for too

The coee is delivered too slowly or a drop at a time.

The coee is ground too nely. Access the settings menu (C3) and follow

Before making the coee, heat the internal circuits by rinsing using the rinse function

(see section “6.1 Rinsing”).

Set a hotter coee temperature in the settings menu (C3) (see section “6.5 Coee temperature”).

water (Please note: you can use the hot water function).

Proceed as described in section “16. Descaling”. Next, check the water hardness (“17.1 Measuring water hardness”) and make certain the machine setting matches the local water supply hardness (“17.2 Setting water hardness”).

the instructions to adjust grinding. The eect is only visible after delivering 3 coees (see section “6.4 Adjust grinder”).

long and has lost its taste.

the instructions to adjust grinding. The eect is only visible after delivering 3 coees (see section “6.4 Adjust grinder”).

→

PROBLEM POSSIBLE CAUSE SOLUTION

Coee does not come out of one or both spouts.

The coee delivered is watery. The funnel (A4) is clogged. Clean the funnel with the help of the

Too little drink is delivered Insucient water in tank Always ll the tank above Level 1.

The appliance does not make coee. The appliance has detected impurities

The brewing unit (A6) cannot be extracted.

At the end of descaling, the appliance requests a third rinse.

Milk does not ow from the milk spout (E5) or (F5).

The milk contains large bubbles and squirts out of the milk spout (E5) or (F5) there is little froth.

The cup shelf (A12) is hot. A number of drinks have been prepared

After cleaning, you can’t put the drip tray back in the machine

The coee spouts (A7) are blocked. Clean the coee spouts with a sponge or

toothpick.

brush (D5) as described in section “15.8 Cleaning the pre-ground coee funnel”.

Wait for the appliance to be ready again in its internal circuits. “Just doing a little cleaning...” is displayed.

The appliance has not been turned o correctly

During the two rinse cycles, the water tank (A22) has not been lled to the MAX level

The milk carafe lid (E1) or (F1) is dirty Clean the milk carafe lid as described in

The lid (E1) or (F1) is not assembled correctly.

The milk is not cold enough or not suitable for the drink requested

The milk carafe lid (E1) or (F1) is dirty Clean the milk carafe as described in sec-

There is water in the groove under the froth adjustment dial (E3) or (F3)

Plant-based drinks have been used. For best results, use drinks at refrigera-

in rapid succession

The condensate tray(A11) is not in the correct position

and reselect the required drink. Contact

customer services if the problem persists.

Turn the appliance o by pressing the

button (A9)

appliance o”).

Follow the instructions displayed by the ap-

pliance, but rst empty the drip tray (A14) to

avoid the water overowing.

section “15.10 Cleaning the milk carafes

(E) and (F)”.

Assemble all the components correctly as

described in sections “9.1 Preparing the

milk carafes (E and F)” and “9.4 Adjusting

the amount of froth”.

For best results, make sure to use the

right type of milk to prepare hot or cold

drinks (see section “9.2 Which milk to

use?”). Use drinks at refrigerator temper-

ature (about 5° C).

tion “9.6 Cleaning the milk carafe after

use”

Extract the dial and dry thoroughly.

tor temperature (about 5° C). Adjust the

amount of froth as described in section

“9.4 Adjusting the amount of froth”

Make sure the condensate tray is inserted

correctly

(see section “5. Turning the

→

PROBLEM POSSIBLE CAUSE SOLUTION

The machine emits noises or small pus of steam while not in use

The appliance emits pus of steam from the drip tray (A14) and/or there is water on the surface the appliance rests on.

The To Go drink is too much or has spilled out of the travel mug

Too little To Go drink is prepared An unsuitable quantity has been selected

The travel mug cannot be inserted in the appliance

The App is not working App malfunction Close the App, then run it again

The App indicates a problem, but there is no problem with the appliance

The machine is ready for use, or has recently been turned o, and condensate is dripping into the hot vaporiser

The drip tray grille (A13)has not been put back after cleaning.

An unsuitable quantity has been selected

The travel mug compartment ap (A16) is closed and/or the coee spouts (A7) are lowered

The data between the appliance and App are not synchronised

This is part of normal operation. To limit

the phenomenon, empty the drip tray.

Put the drip tray grille back in the drip

tray.

Choose a smaller quantity (Medio

Piccolo

Adjust the quantity in the mug so that

the next drink is prepared correctly

Choose a larger quantity (Medio

Grande

Adjust the quantity in the mug so that

the next drink is prepared correctly

Open the ap and/or raise the coee

spouts

Disable and re-enable connectivity (sec-

tion “6.3 Connectivity ”

)

De’Longhi Appliances via Seitz, 47 31100 Treviso, Italy delonghi.com

57132C8814_00_1023

DeLonghi ECAM45086T User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

1. INTRODUCTION

1.1 Letters in brackets

1.2 Troubleshooting and repairs

1.3 Download the App!

2. DESCRIPTION

2.1 Description of the appliance (A)

2.2 Description of the control panel (B)

2.3 Description of the homepage (main screen) (C)

2.5 Description of milk carafe (hot) (E)

2.6 Description of milk carafe (cold) (F)

3. SETTING UP THE APPLIANCE U

4. TURNING THE APPLIANCE ON U

5. TURNING THE APPLIANCE OFF

6. MENU SETTINGS U

6.1 Rinsing

6.2 Descaling

6.3 Connectivity

6.4 Adjust grinder

6.6 Languages

6.9 General

6.11 Water hardness

6.12 Default values

6.13 Drain water

6.14 Statistics

7. DRINK SELECTION

8. MAKING COFFEE DRINKS U

8.2 Directly selected drinks

8.3 Customising the drinks

8.5 Bean Adapt Technology & Espresso SOUL

9. MAKING MILK DRINKS U

9.1 Preparing the milk carafes (E and F)

9.2 Which milk to use?

9.4 Adjusting the amount of froth

9.5 Making milk drinks

9.6 Cleaning the milk carafe after use

10. PREPARING HOT WATER AND HOT TEA U

10.1 Preparing the appliance

10.2 Making hot tea

10.3 Preparing hot water

11. FAVOURITE DRINKS U

12. MAKING “TO GO” DRINKS U

12.1 Cleaning the travel mug after use

13. “MY” FUNCTION (“Hot” drinks only) U

14. SELECTING YOUR PERSONAL PROFILE U

15. CLEANING U

15.1 Cleaning the machine

15.2 Cleaning the internal circuit

15.4 Cleaning the drip tray and drip tray grille

15.5 Cleaning the inside of the machine

15.6 Cleaning the water tank

15.9 Cleaning the brewing unit

15.10 Cleaning the milk carafes (E) and (F)

16. DESCALING U

17. SETTING WATER HARDNESS

17.1 Measuring water hardness

17.2 Setting water hardness

18. WATER SOFTENER FILTER

19. TECHNICAL DATA

19.1 Tips for Energy Saving

20. DISPLAYED MESSAGES

21. TROUBLESHOOTING