DeLonghi DRY VACUUM CLEANER Operating Instructions Manual

DRY VACUUM CLEANER

OPERATING INSTRUCTIONS

Important information

• Read the instruction booklet carefully

•Before using, check that the mains voltage corresponds to
the voltage indicated on the specifications label under the
handle.

• Connect your cleaner only to power outlets with a minimum
of 10 amps and make sure the outlet is earthed. For
machines with double insulation (see the symbol on the
specifications label), earthing is not necessary.

• Always disconnect the appliance from mains outlet
when not in use or before any maintenance or care
operation.

• Do not clean the appliance with benzine or other solvents.
Use soapy water only.

• Do not tug on the power cord, or the machine itself, to
disconnect the appliance from mains outlet.

• Do not leave the appliance unattended while it is running.
Keep it away from the reach of children and persons unfit to
use it.

• Do not run the appliance over the power cord as this may
damage the insulating sheath.

• Do not use to pick up flammable or corrosive liquids and
liquids in general.

• Do not use to pick up matches, hot ash, or burning cigarette
ends.

• Do not attempt to use the appliance if it appears to be faulty.

• To repair or if the power cable is damaged and requires
replacement, contact the dealer or authorised service centre
in order to avoid compromising the efficiency of your
appliance and guarantee the validity of the guarantee. For
the same reasons, you are always recommended to use
original spare parts.

• During operation a significant quantity of air is blown out
from the air exhaust grill, which may be an annoyance if
directed towards the person, especially the face.

8

9

Description

1) Exhaust port

2) Motor unit

3) ON/OFF switch

4) Catch

5) Suction inlet port

6) Tank

7) Motor-protection paper bag

8) Extension tube

9) Flexible hose

10) Carpet and floor brush with two settings

11) Multi-purpose nozzle

12) Crevice tool

Preparing for use

Remove the motor unit by pulling the catches outwards to
release.

Lift off motor unit by the easy-grip handle, remove tools out of
the tank and fit the tools for the task required onto your
cleaner.

Turn the appliance over and fit with the wheels provided,
pushing them into the slots on the base of the tank (some
models come with pre-mounted wheels ).

Make sure that the motor-protection paper bag is fitted over
the motor housing.
Secure the paper filter with an ordinary elastic band.

Reposition the cover checking that the cord is on the opposite
side of the suction inlet port.

ENGLISH