Delimano 3951, 3952 Instruction Manual
No.3951 (Punch card during power failure)
No.3952 (Do not punch card during power failure)
--------------------------------------------------------------------------------------------------------
Microcomputer Time Recorder
Instruction Manual
--------------------------------------------------------------------------------------------------------
Introduction
In order to guarantee safety and correct use of the product, please read this
manual carefully, and keep it properly for future reference.
The product should be only installed in a suitable environment to ensure the
time recorder works properly. Please do not install it in the place under rain
exposure or direct sun exposure.
The product’s specification, appearance and manual may be updated and
changed due to improvement.
This manual has been carefully written. But if you find any error, or do not fully
understand the illustration of the manual, please contact your vendor.
Don’t copy or reprint any or all part of this manual without the permission of
Deli Co., Ltd. Otherwise, we will pursue the legal responsibility.
Catalogue
Introduction
I. Operation safety precautions………………………………………………………………………........1
II. Name of each part…………………………………………………………………………………..…...2
2-1 Appearance name…………………………………………………………………………………...2
2-2 Button descriptions…………………………………………………………………….....……....…3
III. Operation process descriptions…………………………………………………………..........………..4
3-1 Power supply……………………………………………………………………………………... .4
3-2 Open and shut the upper cover………………………………………………………...........……. ..4
IV. Function setting (able to debug after open the upper cover)………………............................……….. .4
4-1 Year setting…………………………………………………………………...………………..……4
4-2 Date setting………………………………………………………………………………...…..……5
4-3 Time setting………………………………………………………………………...………….……5
4-4 Time of changing date setting……………………………………………..........…………….…….6
4-5 Card specification setting…………………………………………….......…………….………..….6
4-6 Salary classification setting (abroad)…………………………………….…...............…..……..….6
4-7 Time system setting………………………………………….………..………....………………….7
4-8 Printing position adjustment………………………………………………...........………….……...7
4-9 Daylight saving time setting……………..……………………………….........…………….……...8
4-10 Centesimal system setting (abroad) …………………………………................………….……....8
4-11 Setting of the front and back of timecard..…………………..................………………….……....9
V. Setting of color change time……………………………………......…………………….…………......9
VI. Setting of ring time……………………………………………………..……………….…………......10
VII. Setting of automatic shifting time…………………………………............………….…………........ .11
VIII. Punching methods…………………………………………………....……………….……….…...... .11
IX. Fault handling………………………………………………………………….……....……………....12
9-1 Fault handling……………………………………………….……..……….……….……………..12
9-2 Fault display codes…………………………………………………….……….….......……….….12
X. Notes…………………………………………………………………………….……….…………....13
XI. Maintenance..………………………………………………………………….……….……………....14
11-1 Replace ribbon……………………………………………………......….……….……………....14
11-2 Replace button battery………………………………………….……............….……………......14
XII. Specification..………………………………………………………………….….….……….…….....15
XIII. Comment..…………………………………………………………...…….….……..……….…….... .15
XIV.Case of setting.………………………………………………………….……….….…..………. . . . . 15
Ruler with hanging holes
I. Operation safety precautions
Before using this product, please carefully read and follow the following notes.
Notice!
PROHIBTED to use the power supply which is not in accordance with the voltage
indicated on the product.
Otherwise it may cause a fire or electric shock
PROHIBTED to be used by children.
The purpose is to prevent injury.
PROHIBTED to plug the power plug with wet hand.
Otherwise, it may cause electric shock.
PROHIBTED to damage or break the power line.
It may damage the power line to put heavy objects on the power line, or pull or bend it,
which are likely to cause fire or electric shock.
PROHIBTED to refit the time recorder.
Otherwise it may cause fire or electric shock.
If any abnormal phenomenon occurs, such as smoke, odor or heat, please unplug
the power plug form the power outlet, and contact the vendor.
Continuing to use the time record in the above circumstance may cause fire or electric
shock.
If foreign bodies (such as metal scraps, water or other liquid) fall into the time
recorder, please unplug the power plug from the power outlet immediately, and
contact the vendor.
Continuing to use the time record in the above circumstance may cause fire or electric
shock.
Before connecting the timekeeping device, please unplug the power plug from the
power outlet.
Otherwise it may cause fire or electric shock.
In order to avoid fire, please only use manufacturer’s specified fuse, rated voltage
and rated current.
Power supply Fuse
AC220V 250V, 1000mA (time delay)
Using any material to replace the fuse will cause fire.
Make sure the capacity of the fuse is suitable before using.
II. Name of each part
1. Appearance name
LCD Screen
Clock face display
Card entrance
Buttons
Upper cover
Keyhole
Appearance (Figure)
Clock face LCD screen
Reset key
Change color Shift
Ring
Volume control key
Card entrance
Confirm
Enter setting status
Terminal seat (diagram)
Get right
Power output
Audio signal output
Hook
Serial number paster
Loudspeaker hole
Terminal seat
Power line
Button seat (diagram)
Sea details in page 14
Back cover
Loading...