Datasheet FILL & CLEAN Specification

Chemical injection mortar Basic WIT-PM 200

Base mortar for masonry and uncracked con­crete

Two-part reactive resin mortar, styrene-free
polyester

Individual xing point in uncracked concrete:

Anchor rod W-VI-A, anchor rod W-VD-A, standard threaded

rod with acceptance test certicate 3.1

Individual xing point in masonry (system with
perforated sleeve SH):

Anchor rod W-VI-A, standard threaded rod with acceptance

test certicate 3.1, perforated sleeve SH

Min./max. processing
temperature
Min./max. ambient temper­ature
Temperature resistance,
long-term temperatures
max.
Temperature resistance,
short-term temperatures
max.

Approval ETA-12/0569, ETA-13/0037
Chemical basis Polyester, styrene free
Colour Grey

/conditions

/

Conditions

-5 to 35 °C

ground during processing and hardening

-40 to 80 °C
process

50 °C

80 °C

Type descrip­tion

WIT-PM 200 300 ml

/

temperature in the anchorage

/

after completely curing

Contents

280 ml

Included in
delivery

Mortar cartridge

300 ml (tubular
lm) + 1 x mixer

nozzle

Suitable appli-

cation gun

Battery-powered
application gun
330ml, Applica­tion gun MULTI,
Application gun

WIT 330ml,
EasyMax 330

ml, HandyMax

330 ml, Silicone

application gun

310ml

Battery-powered
application gun
330ml, Applica­tion gun MULTI,
Application gun
WIT 330ml, Sili­cone application

gun 310ml

Shelf life from

production/
conditions

/

18 Month
and dry storage
area, 5°C to
25°C

12 Month
and dry storage
area, 5°C to
25°C

cool

/

cool

23.10,

24.4

Art. no. P. Qty.

/

12

5918 244 281

5918 242 300

1

/

12

1

CL01_4502012601, Rev: 0.456, State: 02. 10. 2024

Adolf Würth GmbH & Co. KG, 74650 Künzelsau

Type descrip­tion

Contents

Included in
delivery

Suitable appli-

cation gun

Shelf life from

production/
conditions

Art. no. P. Qty.

Battery-powered
application gun
330ml, Applica­tion gun Hand­yMax, Applica­tion gun MULTI,
Application gun

WIT 330ml,

/

18 Month

cool
and dry storage
area, 5°C to
25°C

5918 240 330

/

12

1

WIT-PM 200 330 ml

Mortar cartridge

330 ml (coaxial)
+ 1 x mixer

nozzle

EasyMax 330

ml, HandyMax

330 ml

Details/Application

• Attachment in uncracked concrete, solid and perforated brick masonry, aerated concrete

• Suitable for attaching wooden structures, metal structures, metal proles, brackets, grilles, sanitary ware, pipes, cable conduits,
etc.

Wall units Wooden structures Stairs

Anchoring base: Perforated brick

Drill holes with a rotary

drill (without impact mech­anism)

Observe the injection
mortar curing time

Clean drill hole; 2x blow
out/2x brush out/2x
blow out

Mount component; do not
exceed maximum torque

Cut anchor rod to length
and mark the desired
insertion depths

Insert perforated sleeve Screw mixer onto

cartridge

Before use, press out

approx. 10cm cord

Completely ll with

composite mortar from
end of perforated sleeve

Press in anchor rod up to
the bottom of the sleeve
while turning slightly

CL01_4502012601, Rev: 0.456, State: 02. 10. 2024

Adolf Würth GmbH & Co. KG, 74650 Künzelsau

Anchoring base: Solid brick

Create the drill hole Clean drill hole; 2x blow

Observe the injection
mortar curing time

out/2x brush out/2x
blow out

Mount component; do not
exceed maximum torque

Cut anchor rod to length
and mark the desired inser­tion depths

Base material: Uncracked concrete

Create the drill hole Clean drill hole; 2x blow

out/2x brush out/2x
blow out

Cut anchor rod to length
and mark the desired inser­tion depths

Screw mixer onto cartridge Before use, press out

approx. 10cm cord

Screw mixer onto cartridge Before use, press out

approx. 10cm cord

Fill with composite mortar
starting from drill hole

base (see enclosed leaet)

Fill composite mortar from
bottom of drill hole

Press in anchor rod up to
the bottom of the sleeve
while turning slightly

Press in anchoring element
up to drill hole base while
turning slightly

Visual check of mortar
volume, embedment depth
mark

Visual check of mortar
volume, embedment depth
mark

Observe the injection
mortar curing time

Install component, apply
installation torque

Proof of performance

• European Technical Assessment ETA-12/0569: Individual xing point + uncracked concrete (anchor rod W-VI-A, anchor rod
W-VD-A, standard threaded rod with acceptance certicate 3.1)

• European Technical Assessment ETA-13/0037: Individual xing point + masonry (anchor rod W-VI-A, standard threaded rod

3.1, perforated sleeve SH, aerated concrete only without perforated sleeve)

Contents for art. no. 5918 240 330
Designation Art. no. Quantity

FILL & CLEAN static mixer

0903 420 001

1

CL01_4502012601, Rev: 0.456, State: 02. 10. 2024

Adolf Würth GmbH & Co. KG, 74650 Künzelsau

Contents for art. no. 5918 242 300
Designation Art. no. Quantity

FILL & CLEAN static mixer

##keep##

Related products
for

Designation Art. no.

0903 420 001

Application gun WIT
Cordless application gun WIT
Application gun HandyMax

5918 240 330

Application gun EasyMax Length 370 mm

FILL & CLEAN static mixer
FILL & CLEAN static mixer
Mixer nozzle extension WIT-MV Diameter 10 mm
Application gun WIT

5918 242 300

FILL & CLEAN static mixer
FILL & CLEAN static mixer
Mixer nozzle extension WIT-MV Diameter 10 mm

1

0891 003
0891 003 330
0891 007
0891 007 201
0903 420 001
0903 420 001
0903 420 004
0891 003
0903 420 001
0903 420 001
0903 420 004

CL01_4502012601, Rev: 0.456, State: 02. 10. 2024

Adolf Würth GmbH & Co. KG, 74650 Künzelsau