Data sheet
Actuators for three point control with stroke limitation (SL)
AMV 20 SL, AMV 30 SL
AMV 23 SL - with EN 14597 certified safety function
Description
AMV 20 SL, AMV 30 SL AMV 23 SL
Ordering
The actuators for 3-point controls with or
without safety function are suitable to be used
with VS2, VM2, VB2 and AVQM valves.
The safety function on AMV 23 SL is activated
automatically in case of power failure or if the
power supply is switched off by the safety
thermostat. This function provides safety shut off
on power failure.
In addition to basic function such as manual
control and position indication, the actuators are
also equipped with force sensitive switch-off to
ensure that actuators and valves are not exposed
to overload. This function automatically ensures
the self-adjustment of the end positions on the
valve.
Actuators are also equipped with stroke
limitation that can limit flow in valves. Limitation
of stroke is designed with switch that can be
set in any desirable position (stroke limit from
0to100%).
Typ e Supply voltage Code No.
AMV 20 SL 230 V~ 082G3035
AMV 20 SL 24 V~ 082G3036
AMV 30 SL 230 V~ 082G3055
Features:
• The advanced design incorporates load
related ‘switch-off’ to ensure that actuators
and valves are not exposed to overload.
• Digital feedback end position indication
signal for valve end position is available by
terminal 4 or 13.
• Low weight and robust.
Main data:
• Nominal voltage:
- 24 Vac and 230 Vac (AMV 20 SL, AMV 23 SL)
- 230 Vac (AMV 30 SL)
• Control input signal: 3 point
• Force: 450 N
• Speed:
- AMV 20 SL, AMV 23 SL ......................... 15 s/m m
- AMV 30 SL ............................................... 3 s/mm
• Max. medium tempetrature: 150 °C
• Safety function: EN 14597
• Stroke limitation (SL)
Spring return function - EN 14597 approval
Typ e Supply voltage Code No.
AMV 23 SL 230 V~ 082G3037
AMV 23 SL 24 V~ 082G3038
© Danfoss | 2018.12 VD.AE.H7.02 | 1
Data sheet Actuators for three point control AMV 20 SL / 23 SL / 30 SL
Technical data
Stroke limitation
Typ e AMV 20 SL AMV 23 SL AMV 30 SL
Power supply Vac 24~, 230~; +10 to –15 % 230~; +10 to –15 %
Power consumption VA 2.15 7 7
Frequency Hz 50/60
Safety function - yes -
Control input 3-point
Closing force N 450
Spindle travel mm 10
Spindle speed s/mm 15 3
Max. medium temperature inside the pipe
Ambient temperature 0 ... 55
Storage and transport temperature −40 ... 70
Ambient humidity 5-95 % r.h., non-condensing
Protection Class I (230 V); III (24 V)
Grade of enclosure IP 54
Weight kg 1.4 1.45 1.4
- marking in accordance with standards
°C
Low Voltage Directive (LVD) 2014/35/EU: EN 60730-1, EN 60730-2-14
Electromagnetic Compatibility Directive (EMC) 2014/30/EU: EN 61000-6-2,
EN 61000-6-3
150
Installation
AMV 20 SL, AMV 30 SL AMV 23 SL
Mechanical
The actuator should be mounted with the valve
stem in either horizontal position or pointing
upwards.
The actuator is fixed to the valve body by means
of a mounting ring, which requires no tools for
mounting. The ring should be tightened by
hand.
Disposal The actuator must be dismantled and the
elements sorted into various material groups
before disposal.
Electrical
Important: It is strongly recommended that the
mechanical installation is completed before the
electrical installation.
Note: Two cable entries are provided for M 16×1.5
cable glands. One entry is provided with a rubber
grommet. Note that in order to maintain the
enclosure’s IP rating, appropriate cable glands must
be used.
2 | VD.AE.H7.02 © Danfoss | 2018.12