Danfoss AMES Data sheet

Data sheet	Built-in function module AMES

Application

AMES

The built-in function module AMES is used together with gearmotors AMV 323, 423 and 523.

AMES is designed for modulating motor voltage control via a controller. The control voltage from the controller to AMES must be within ranges 0 - 10 V or 0 - 20 mA.

Travel direction can be changed in relation to rise of fall of control voltage.

Total control voltage ranges or partial ranges and travel direction can be selected by microswitches.

AMES incorporates a facility for override.

Ordering	Type	Supply voltage		Code nos.
	AMES	24 V ~		082B3328
	AMES	230 V ~		082B3329
Data	Supply voltage		24V~ ± 10%
			230/240 V~ +6%/–10%
	Frequency		50 Hz
	Consumption		3 VA
	Control signal input		0	- 10V DC
			0	- 5 V DC
			5	- 10 V DC
			0	- 20 mA
	Enclosure		IP 20
	Ambient temperature		Min 0 °C, max 50 °C
	Transport and storage temperature		Min –40 °C, max 70 °C
	Weight		0.3 kg
	- marking		EMC-Directive 89/336/EEC, 92/31/EEC, 93/68/EEC,
	in accordance with the standards		EN 50081-1 and EN 50082-1
			Low Voltage Directive 73/23/EEC and 93/68/EEC

BC-HM

ED.95.B5.02 © Danfoss 4/96

1

Data sheet		Built-in function module AMES

Wiring

	Terminal 6, 7:	Supply voltage.
	Terminal 1, 2, 3, 4, 5: Supply voltage from AMES to AMV motor.
	Terminal 10:	10 V output, max. 1 mA.
	Terminal 12:	Earth.
	Terminal 40, 41:	Control voltage input from controller. Input 40 has higher priority than input 41.
		If control signal from connected controller is to be overridden, control signal
		must be connected to terminal 40.
	Wire lengths		Recommended wire-cross section	Recommended wire-cross section
			for 24 V systems	for 230 V system
	0 - 50 m		0.75	0.4
	> 100 m		1.5	0.75

Setting microswitches

2	ED.95.B5.02 © Danfoss 4/96

BC-HM