Danfoss AMEK Data sheet
Data sheet |
Built-in function module AMEK |
|
|
Application |
|
|
The built-in function module AMEK is |
|
|
|
designed for use together with gearmotors |
|
|
|
AMV 323, 423 and 523. The module |
|
|
|
incorporates a contact set with two double |
|
|
|
contacts. The contacts are used for signalling |
|
|
|
and can be adjusted individually to the whole |
|
|
|
motor operating range. Three AMEK |
|
|
|
modules can be mounted in the motor, or |
|
|
|
one AMEK module can be combined with |
|
|
|
one of the other three modules: AMEP, |
|
AMEK |
|
AMES or AMER. |
Ordering |
Type |
Supply voltage |
Code no. |
|
AMEK |
24 V, 230 V ~ |
082B3301 |
Data |
Contact function |
|
2 × SPDT, fully adjustable |
|
Load |
|
Max. 250 V, 3(1) A(µ) |
|
Enclosure |
|
IP 20 |
|
Ambient temperature |
Min 0 °C, max 50 °C |
|
|
Transport and storage temperature |
Min –40 °C, max 70 °C |
|
|
Weight |
|
0.2 kg |
|
- marking |
|
EMC-Directive 89/336/EEC, 92/31/EEC, 93/68/EEC, |
|
in accordance with the standards |
EN 50081-1 and EN 50082-1 |
|
|
Low Voltage Directive 73/23/EEC and 93/68/EEC |
||
Wiring
| <![if ! IE]> <![endif]>Brown |
<![if ! IE]> <![endif]>Green |
<![if ! IE]> <![endif]>Yellow |
<![if ! IE]> <![endif]>Grey |
<![if ! IE]> <![endif]>Pink |
<![if ! IE]> <![endif]>White |
Installation
BC-HM
ED.95.C5.02 © Danfoss 4/96 |
1 |
Data sheet |
|
|
Built-in function module AMEK |
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
ED.95.C5.02 © Danfoss 4/96 |
BC-HM
Loading...