User Manual
By Firstech LLC, Version: 1.1
Applicable to the following remote(s);
Pro 1BAMR (1-Way 1 Button Remote)
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
(1)This device may not cause harmful interference.
(2)This device may accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.
WWW.COMPUSTAR.COM
1
Table Of Contents
Introduction ............................................................................................................................................ |
3 |
Kit(s) Contents ....................................................................................................................................... |
3 |
Warranty Coverage ................................................................................................................................ |
3 |
Remote Reference ................................................................................................................................. |
3 |
Quick Reference ...................................................................................................................................... |
4 |
Valet Mode ......................................................................................................................................... |
4 |
Remote Maintenance – Battery Replacement ................................................................................... |
4 |
One-Way Remote: Pro 1BAMR ............................................................................................................. |
4 |
1 Button Remote Functions................................................................................................................ |
4 |
General System Functions.................................................................................................................... |
4 |
Sending Commands........................................................................................................................... |
4 |
Active Lock/Arm and Unlock/Disarm.................................................................................................. |
5 |
Automatic Transmission Remote Start Function................................................................................ |
5 |
Manual Transmission Remote Start Function (Reservation Mode).................................................... |
5 |
Activating Reservation Mode ............................................................................................................. |
5 |
Cancelling Reservation Mode ............................................................................................................ |
6 |
Reservation Mode Settings ................................................................................................................ |
6 |
Anti Grind/Starter Kill.......................................................................................................................... |
6 |
Secure Valet Switch ........................................................................................................................... |
6 |
Remote Coding / Programming Routine(s) ......................................................................................... |
7 |
Programming P1BAMR...................................................................................................................... |
7 |
Remote Start Error Diagnostic ............................................................................................................. |
7 |
Limited Lifetime Warranty..................................................................................................................... |
8 |
Notes: ...................................................................................................................................................... |
9 |
2
Introduction
Thank you for purchasing a CompuStar Pro system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you fully review the following manual. Please note that this manual applies to the Pro 1 Button Remote Starter system only. The P1BAM-S offers keyless entry and remote start only. There may also be features listed in this manual that require additional installation or programming before they can become active. If you have any questions, please contact the original place of purchase. For further information you may also contact our customer support center by calling 888-820-3690.
Kit(s) Contents
-1 x Pro 1BAMR Remote
-Starter Only Control Module
-1 x ANT-AM Antenna
-1 x Hood Pin
Warranty Coverage
Caution: The Manufactures warranty will be voided if this product is installed by anyone other than an authorized CompuStar Pro dealer. For complete warranty details visit www.compustar.com or the last page of this manual.
Warranty registration can be completed online by visiting www.compustar.com. Please complete the registration form within 10 days of purchase. We no longer include a mail-in warranty registration card with each unit – registration must be done online. To verify that an authorized dealer installed your system, we highly recommend that you keep a copy of the original proof of purchase, such as the dealer invoice in a safe place.
Remote Reference
P1BAMR (1-Way 1 Button Remote)
Applicable to the following models;
- P1BAM-S (remote start only)
3
Quick Reference
Valet Mode
When servicing or loaning your vehicle to others, the CompuStar Pro system should be placed in Valet mode. Valet mode prevents the system from remote starting and disables all alarm functions. IMPORTANT: While in Valet mode the CompuStar will still lock and unlock power lock systems.
The system can be put into valet one of two ways;
1. You can put the system into valet by turning the ignition key “on” and then “off” five times within 7 seconds. The parking lights will flash once to confirm the system is in valet mode. Shortly after the first flash, the parking lights will flash twice.
2.(Optional Feature) If your system is set up for a secure valet option, you will not be able to put the system into valet until the proper code has been entered with the secure valet switch.
Remote Maintenance – Battery Replacement
The only regular maintenance this system requires is remote control battery replacement. No programming is required when replacing the battery.
One-Way Remote: Pro 1BAMR
First, remove the small Phillips screw located on the back of the remote. Once the screw has been removed, gently pull the remote apart being careful to not touch the circuit board. The P1BAMR requires two CR2016 batteries. These specialty batteries can be purchased from your local CompuStar dealer or an electronics store.
1 Button Remote Functions
|
|
|
|
Additional |
|
|
Button |
|
Duration |
|
Programming |
|
Function / Description |
|
|
|
|
Required |
|
|
|
1.0 |
|
no |
Lock/Arm. Tap again to Unlock/Disarm your vehicle |
||
|
|
second |
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3.5 |
|
no |
|
Activates the remote start. Repeat and remote start will shut off. |
|
|
|
seconds |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
General System Functions
The remote transmitter functions have been predetermined and programmed from the factory. The single button configuration allows for keyless entry and/or remote start functionality. Although other CompuStar PRO systems have numerous button functions and capabilities, please keep in mind that your system has the option for future upgradeability to a 2-way system.
Sending Commands
When in range, and the button has been pressed, the remote bright blue LED will illuminate and vehicle’s parking lights will flash. For example, to send a remote start command from the P1BAMR, hold down the single button for 3.5 seconds. The remote bright blue LED will come on solid and then flash.
4
Loading...