Compustar 2WSHLCD, 2WSSR-PRO, 2W9000FMR-433, 2W9000FMR-907, 2W8000FMR User's Manual

			l’autorisationd’opérerce.dispositif
AVERTISSEMENT:Deschangementsoumodificationsnon-expressementapprouvésparlespartiesresponsablesdecetteconformitépeuventannuler
(2)Cedispositifdevraitaccepterlesinterférencesreçuesincluantcellesquipourraientoccasionnerdesopérationsindésirables..
			(1)Cedispositifnedevraitpascauserdesinterférences.nuisibles
Cedispositifestconformeaveclapartie15desrèglements.FCCL’opérationestassujettieauxconditionssuivantes:
	7087AR561WSS		VAJR561WSS		2WSS-9000
	7087A-R703A433		VA5JR703A433		2WSHLCDR-703
	7087A-R702F433		VA5JR702F433		NU4500R
	7087A-2W8000R		VA5J2W8000R		2W8000FMR
	7087A-R561F907		VA5JR561FM907		2W9000FMR-907
	7087A-R561FM433		VA5JR561FM433		2W9000FMR-433
	N/A		O44JMR600SS		2WSSR-PRO
	3767B-MR5100		O44JMR5100		2WSHLCD-5P
	ICIDNumber(InternationalOnly)		FCCIDNumber(USOnly)		Remote
Touteslestélécommandesbidirectionnelles5Pà4boutonsàafficheuràcristauxliquides
			Applicableauxtélécommandessuivantes:
	Manueldel’utilisateur
com.compustar.www					com.firstechllc.www

www.firstechllc.com

www.compustar.com

Applicable to the following remote(s)

All 5P - 2 way, 4 button Liquid Crystal Display Remote

Remote	FCC ID Number (US Only)	IC ID Number (International Only)
2WSHLCD -5P	O44JMR5100	3767B-MR5100
2WSSR-PRO	O44JMR600SS	N/A
2W9000FMR-433	VA5JR561FM433	7087A-R561FM433
2W9000FMR-907	VA5JR561FM907	7087A-R561F907
2W8000FMR	VA5J2W8000R	7087A-2W8000R
NU4500R	VA5JR702F433	7087A-R702F433
2WSHLCDR-703	VA5JR703A433	7087A-R703A433
2WSS-9000	VAJR561WSS	7087AR561WSS

t @ @ @ @p @QU@ @ @fcc@ N@@o @ @ @ @ @ @ [

HQI@t @ @ @ @ @ @ N

HRI@t @ @ @ @ @ @ L@ @ @ @ @ @ @ N

cautionZc @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ N

t @o @c

	i	T	g @s @f	QV
			s @c	QV
	w @c	T	r @c	QV
			a @l @O@a @ @u @O@d	QV
	q @r	U	p @l @O@a	QW
			a @t @r @s @f	QW
	v @m	U	m @t @r @s @f @Hr @m I	QX
	r @m @M@b @r	V	a @r @m	QX
	p @ @c @Hlcd@r @o I	V	c @r @m	QY
	Rw @r @b @f	W	r @m @s	QY
	Qw @r @b @f	Y	t @r	QY
			aux @o @O@w @r Md @O@s @d	RP
			t @ @b @q	RP
			s @a @O@d	RQ
			r @m @O@v @m	RQ
			s @s @o Oo	RR

a @s @f	RS
d @l @O@ @c @d @l	RS
t @t @m	RS
R c @m @Hm @v @c I	RT
c @c @O@rps@Hr @p @s I	RT
rps@Hr @p @s I@u @O@d	RU
s @v @s	RV
t @s @m	RW
c @O@h @s @m	RX
a @m	RX

r @c @O@p @r H I	SP
p @Rw @Tb @r	SP

t @o @c

r @s @e @d	SQ
a @d	SR
l @l @w	SS

ByFirstech,LLC 2

3 ByFirstech,LLC

Introduction

Thank you for purchasing a Firstech system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you thoroughly review the following manual. Please note that this manual applies to the 2 Way - 4 Button Liquid Crystal Display Remotes, regardless of whether you purchased the alarm only, starter only or alarm/starter combination. This manual also supports your 1 Way Fiancé remotes that may be included with your system. There are certain features listed in this manual that may not be available for your system. There may also be features listed in this manual that require additional installation or programming before they are active. If you have any questions, please contact the original place of purchase. For further information you may also contact our customer support center by calling 888-820-3690.

Warranty Coverage

Caution: The Manufacture’s warranty will be voided if this product is installed by anyone other than an authorized Firstech dealer. For complete warranty details

!visit www.compustar.com or the last page of this manual. Firstech remotes carry a 1 year warranty from original date of purchase.

Warranty registration can be completed online by visiting www.compustar.com. Please complete the registration form within 10 days of purchase. We do not include a mail in warranty registration card with each unit - registration must be done online. To verify that an authorized dealer installed your system, we highly recommend that you keep a copy of the original proof of purchase, such as the dealer invoice in a safe place.

Quick Reference

v @m

When servicing or loaning your vehicle to others, the system should be placed in Valet Mode. Valet Mode prevents the system from remote starting and disables all alarm functions.

IMPORTANT: While in Valet mode the remote will still control power lock and unlock systems. The parking lights will not flash.

The system can be put into valet one of three ways:

1. Turn the vehicle’s key to the ignition “on” position and tap buttons (I + III) simultaneously for 0.5 second. The parking lights will flash once and the LCD will display Z’s above the vehicle image to confirm the system is in valet mode. Repeat this process to take the system out of valet mode.

The parking lights will flash twice and Z’s will disappear to confirm the system is out of valet mode.

2.If you do not have your remote control, you can put the system into valet by turning the ignition key “on” and then “off” five times within 7 seconds. The parking lights will flash once to confirm the system is in valet mode. Shortly after the first flash, the parking lights will flash twice. A remote control is required to take the system out of valet mode.

3.If your system is set up for a secure valet option (optional), you will not be able to put the system into valet until the proper code has been entered to the secure valet switch. The secure valet switch is the small button with bright blue LED on the front and if installed is the only way to override the alarm and/or remote start. Until programmed, the default code is (3, 3).

ByFirstech,LLC

4

5 ByFirstech,LLC

Quick Reference

r @m Mb @r

The only regular maintenance this system requires is remote control battery replacement. No programming is required when replacing the battery.

Two Way Remotes:

First, release the battery cover lock located on the back of the remote. Once the lock is released, gently slide the battery cover off to expose the battery. With the exception of the 2WSSR-PRO (Uses 1 AA battery) all Firstech 2 Way remotes require one AAA battery.

IMPORTANT: Be sure to observe correct polarity when installing the battery.

One Way Remotes:

First, remove the small Phillips screw located on the back of the remote. Once the screw has been removed, gently pull the remote apart taking care to not damage the circuit board. 1 Way remote batteries differ among the models. Your battery size should be listed on the battery. Replacements can be purchased from your local Firstech dealer or an electronics store.

p @ @c @Hlcd@r @o I

STEP 1: Enter remote programming mode by holding down buttons (II + III) for 2.5 seconds. The remote will beep once and the LCD will read “Prog” to indicate that you have successfully entered programming mode.

STEP 2 (Pro Remotes): After entering programming mode the time icon will flash indicating to set the time. Adjust the time settings by tapping button (I) to change the hour and tapping button (II) to adjust the minutes.

STEP 2 (Non Pro Remotes): After entering programming mode tap button (I) and the time icon will flash to set the time. Adjust the time settings by tapping button (I) to change the hour and tapping button (II) to adjust the minutes.

STEP 3: Once the desired time has been set, exit remote programming by holding down buttons (II + III) for 2.5 seconds. The remote will beep three times indicating that you have successfully exited programming mode.

Quick Reference

R@w @r @b @f

	Button	Duration	AdditionalProgramming	Function / Description
			Required
	I	0.5 seconds	no	Locks doors and/or arms alarm. Tap again to unlock door and / or alarm.
		2.5 seconds	yes	Run time extender. Resets remote start and turbo run time while vehicle is remote started
	II	0.5 seconds	no	Aux 1. Triggers the auxiliary 1 output (most commonly used for rear defrost or window roll-down)
		2.5 seconds	no	Activates the remote start. Repeat and remote start will shut off
		0.5 seconds	no	Aux 2. Triggers the auxiliary 2 output (most commonly used for rear defrost or window roll-down)
	III	2.5 seconds	no	Trunk pop. Triggers the trunk release output and opens the vehicleís trunk
		double tap	no	Pro Remotes Only : Turns on the CompuGLO backlight
		0.5 seconds	no	CarCheck(updatesvehiclestatusonremotepager)/SecureAuxiliary/TemperatureDisplay/VehicleVoltageDisplay
	IV	2.5 seconds	no	Panic/vehicle locater (flashes vehicleís parking lights and sounds siren and horn)
				Pro Remotes Only : Locks buttons and displays "Hold" on screen.
		4 seconds	no	ProRemotesOnly: Panic / vehicle locater (flashes vehicle's parking lights and sounds siren and horm)
	I + II	0.5 seconds	no	Turnssirenchirpson/off(Note:Withthesirenchirpsoff,itwillstillsoundintheeventthealarmis triggered)
		2.5 seconds	no	Option programming menu 1. For use during installation
	I + III	0.5 seconds	no	Valet mode (see page 8 for details)
		2.5 seconds	no	Turns the shock sensor on/off (Alarm or Alarm / Starter system only)

ByFirstech,LLC

6

7 ByFirstech,LLC

Quick Reference

R@w @r @b @f

	Button	Duration	AdditionalProgramming	Function / Description
			Required
	I + IV	0.5 seconds	yes	Drive lock. Activates ignition controlled door locks
		2.5 seconds	no	Option programming menu 2. For use during installation
		0.5 seconds	no	Activates passive arming (vehicle will arm/lock 30 seconds after the vehicle is disarmed)
	II + III	2.5 seconds	no	Accesses remote option programming
				(clock, reservation time start, vibrate mode, and RPS on/off)
	II + IV	0.5 seconds	yes	Activates timer start mode. Timer start mode has multiple programmable settings:
				duration settings, temperature settings and self start settings.
	III + IV	0.5 seconds	yes	Activates Turbo timer mode.
		2.5 seconds	yes	Activates the 2nd Car function

Quick Reference

Q@w @r @b @f

Button	Duration	AdditionalProgramming	Function / Description
		Required
	0.5 seconds	no	Locks doors and / or arms alarm.
	3.5 seconds	no	Panic/vehicle locater (flashes vehicle’s parking lights and sounds siren and horn)
	0.5 seconds	no	Unlocks doors and / or disarms alarm.
	0.5 seconds	no	Aux1.Triggerstheauxiliary1output(mostcommonlyusedforreardefrostorwindowroll-down)
	2.5 seconds	no	Trunk release. Triggers the trunk release output and opens the vehicle’s trunk.
	0.5 seconds	no	Aux2.Triggerstheauxiliary2output(mostcommonlyusedforreardefrostorwindowroll-down)
	2.5 seconds	no	Activates the remote start. Repeat and remote start will shut off
	0.5 seconds	no	Turns siren on/off (Note: With the siren off, it will still sound in the event the alarm is triggered)
	2.5 seconds	no	Option programming menu 1 - Installers Only
	0.5 seconds	no	Valet mode (see Valet Mode section for details)
	2.5 seconds	no	Turns the shock sensor on/off. (Alarm or alarm / Starter systems only)

ByFirstech,LLC 8

9 ByFirstech,LLC

Quick Reference

Q@w @r @b @f

Button	Duration	AdditionalProgramming	Function / Description
		Required
	0.5 seconds	yes	Drive lock. Activates ignition controlled door locks.
	2.5 seconds	no	Option programming menu 2 - Installers Only
	0.5 seconds	no	Activates passive arming (vehicle will arm/lock 30 seconds after the vehicle is disarmed)
	0.5 seconds	yes	Activates timer start mode. Timer start mode has multiple programmable settings:
			duration settings, temperature settings and self start settings
	0.5 seconds	yes	Activates the built-in Turbo timer function. Additional installation is required when using this
			feature on automatic transmission in vehicle’s
	2.5 seconds	no	Car Check (updates vehicle status on remote pager) / Secure Auxiliary

If you would like additional information on the functionality of your 1way companion remote, please visit the support page at www.compustar.com to download the full user manual.

Remote LCD(liquid crystal display) Diagram and icons

Your remote pager will indicate the status of your vehicle while in range. The unique LCD design will visually display such icons as lock/unlock status, remote start confirmation and remaining run-time, impact/shock notification, battery voltage, temperature display and much more.

Signal

Strength

Start

Avail

Siren

Vibration

Battery

Aux

Lock	Shock
	Sens off
Status	Turbo

2nd Car

Alarm Clock

Auto

Passive

Ign. Con

Door Locks

Cold Start

Valet

Volage

Temperature

	Car Call
Impact	Trunk
Hood	Door
Parking	Engine
Lights	Running

ByFirstech,LLC 10

11 ByFirstech,LLC

Remote LCD(liquid crystal display) Diagram and icons

c @i M

Lock/Arm - Unlock/Disarm

This icon indicates whether the system is locked/armed or unlocked/disarmed. While armed, the system will monitor the doors, trunk, hood, shock sensor, and aux inputs. If any of these inputs are triggered while the system is armed, the alarm will be triggered.

Trunk Release

This icon will be displayed when the trunk release function has been activated. By default, the system will be disarmed and the doors will unlock before the trunk is released.

Signal Strength

This icon is displayed if the last communication to the vehicle was successful.

Valet Mode

This icon will be displayed while you are in Valet mode. While in valet mode, the system will not perform any functions other than lock and unlock. The alarm will not arm or disarm while locking or unlocking. If any other function is attempted,Sleep will be displayed. The system will not monitor the alarm triggers while in Valet mode.

Battery Indicator

This icon displays the remaining battery life left in 25% increments.

Car Call

This icon will be displayed while someone is attempting to contact you using the RPS sensor. To trigger the RPS sensor, you must knock on the windshield where the sensor is located. Something that creates a higher pitch, like a key, is better suited to trigger the RPS.

ByFirstech,LLC 12

Remote LCD(liquid crystal display) Diagram and icons

s @i M

Engine Running

This icon will be displayed while the vehicle is running after it has been remote started.

Start Availability

Thisiconwillbedisplayedwhenthevehicleisreadytoberemote-started.Ifthisiconisnotdisplayed,youwillnotbeable toremote-startthevehicle.

Timer Mode

This icon will be displayed when Timer mode is active. Timer mode can be set up to start the vehicle every 1.5, 3, or once very 24hours

Cold / Hot Start

This icon will be displayed if Cold Start mode is currently active. Cold Start mode will start the vehicle if the vehicle reaches a preset hot or cold temperature. These temperatures can be adjusted by the installer.

s @i M

Siren

This icon will be displayed if the siren is turned on. Turning the siren off only applies to the chirps when arming, disarming, or remote-starting. The siren will still sound if the alarm is triggered.

Hood

This icon will be displayed if the hood is opened while the system is armed. The remote will beep rapidly while displaying this icon. This means that the alarm was triggered. If this icon appears while trying to remote-start the vehicle, it means that the vehicle will not start because the hood is open.

13 ByFirstech,LLC

Impact

This icon will be displayed if an impact to the vehicle is detected while the system is armed. The remote will beep rapidly while displaying this icon if the impact is hard; this means that the alarm was triggered. If it beeps slowly while displaying this icon, that means that the impact was soft and that the alarm simply gave four warning chirps.

Door

This icon will be displayed if the door is opened while the system is armed. The remote will beep rapidly while displaying this icon. This means that the alarm was triggered. If this icon appears while trying to remote-start the vehicle, it means that the vehicle will not start because the door is open.

Trunk

This icon will be displayed if the trunk is opened while the system is armed. The remote will beep rapidly while displaying this icon. This means that the alarm was triggered. If this icon appears while trying to remote-start the vehicle, it means that the vehicle will not start because the trunk is open.

Car Call

This icon will be displayed while someone is attempting to contact you using the RPS sensor. To trigger the RPS sensor, you must knock on the windshield where the sensor is located. Something that creates a higher pitch, like a key, is better suited to trigger the RPS.

a @i M

Passive Mode

This icon will be displayed if Passive mode is currently active. Passive mode will automatically arm the system 30 seconds after the last door is closed or 30 seconds after the system was disarmed if no door was opened. This mode is ignored while the ignition is on with the key.

Drive Lock

This icon will be displayed if Drive Lock mode is currently active. Drive Lock mode will lock the doors automatically if the ignition is on and the brake is pressed or if the ignition is on and the engine exceeds the idle RPM multiplied by 2, depending on the options set by the installer. The doors will be unlocked when the ignition is turned off. In a manual transmission vehicle the doors will unlock when the emergency brake is set.

ByFirstech,LLC 14

Turbo Mode

This icon will be displayed if Turbo mode is currently active. While Turbo mode is active, the vehicle will remain running for a preset time after the emergency brake has been set and the key has been removed from the ignition.

2nd Car Mode

This will be displayed while you are in 2nd Car mode. 2nd Car mode allows you to control another vehicle with the same system installed in it. The remote needs to be coded to the other vehicle in 2nd Car mode for this feature to work.

Vibration

This icon will be displayed if the remote is set to vibrate only. While the remote is set to vibrate only the remote will not beep, even if the alarm is triggered. The remote will still vibrate in this mode.

Alarm Clock

This icon will be displayed if the Alarm Clock function is turned on. When the clock reaches the preset time, the remote will beep and flash the alarm clock icon. Press button IV for 0.5 sec. to silence the remote.

Shock Sensor Bypassed

This icon will be displayed when the shock sensor is bypassed by pressing buttons I+III for 2.5 sec. Impact to the vehicle will not be detected at this time. This icon is always displayed on starter only systems because there is no shock sensor.

Aux Mode (Alarm or alarm/starter systems only)

This icon will be displayed while you are in Aux mode. During this time, you can activate auxiliary outputs 1 or 2 by pressing button II or III. Aux outputs can be used to activate various systems or functions in a vehicle.

Voltage

This icon will be displayed while the remote is reporting the voltage of the vehicle or remote battery.

Temperature

This icon will be displayed while the remote is reporting the temperature of the vehicle.

15 ByFirstech,LLC

General System Functions

The remote transmitter functions have been predetermined and programmed from the factory. The four button configuration allows for many functions to be performed through a series of tapping, holding and / or multiple presses of buttons.

Sending Commands

When in range, and a command has been sent, the remote pager backlight will illuminate, the remote will beep and the appropriate icon will be displayed. For example, to send a remote start command from the pager, hold down button (II) for 2.5 seconds. The backlight will illuminate and the remote will beep once to confirm the command has been sent and that the remote is in range. Once the vehicle has successfully remote started, the remote will receive a command indicating the vehicle is running.

Receiving Commands

The remote pager will receive commands indicating the status of the vehicle, confirmation of sending commands and alarm notifications. For example, after sending the lock command, the pager will be updated with the lock icon to confirm the vehicle has been successfully locked/armed. To see if your pager is in range, tap button (IV) for half second - if the pager backlight illuminates and beeps, the pager is in range.

a @l @O@a @ @u @O@d

Tap button (I) for 0.5 seconds to lock/arm and unlock/disarm. If your vehicle is locked, tap button (I) to unlock; if your vehicle is unlocked, tap button (I) to lock. If equipped this will also activate your starter kill and anti grind feature. You will not be able to start your vehicle with the key until unlock/disarm.

IMPORTANT: If the alarm has been triggered (Siren is going off), you must wait until the remote pager has been paged before disarming the alarm - the first button tap will shut off the alarm and the second will unlock/disarm the system.

General System Functions

p @l @O@a

The system can be configured to passively lock and arm the vehicle. Put the system in passive by tapping buttons (II+III) simultaneously for 0.5 seconds. The remote will beep once and the passive icon will illuminate to indicate the system is in passive lock and arming mode.

While in passive mode, the system will lock and arm the alarm 30 seconds after the last door is closed. As an indicator that the vehicle is going to passively lock and arm, the remote and siren will chirp once and the parking lights will flash once at both 10 and 20 seconds prior to passively locking and arming. If you want the system to passively arm and not passively lock, ask your local Firstech dealer to turn Option 1-8 to setting II.

a @t @r @ @f

Press button (II) for 2.5 seconds to remote start an automatic transmission vehicle. If you are in range and if the vehicle is ready to remote start, the remote will beep once and the CompuGLO backlight will light up to indicate that the remote start command has been successfully transmitted.

If you are in range and the remote beeps three times, there is a remote start error. Refer to the “remote start error diagnostic” on the last page of this manual for details.

Upon receiving confirmation that your vehicle is running, the LCD will flash the exhaust icon and the clock icon will begin to show the amount of run-time remaining. The remote start run-time can be programmed for 3, 15, 25 or 45 minutes - ask your local CompuStar dealer to adjust Option 2-7 if you would like a run-time other than 15 minutes (default).

IMPORTANT : Your vehicle’s key must be inserted into the ignition and turned to the “on” position prior to driving your vehicle. If the foot brake is depressed prior to the key being in the “on” position, the vehicle will shut off.

ByFirstech,LLC 16

17 ByFirstech,LLC

General System Functions

m @t @r @s @f @Hr @m I

In order to remote start a manual transmission vehicle, the system must first be set in Reservation Mode. Reservation Mode must be set each and every time you want to remote start a manual transmission vehicle. The purpose of Reservation Mode is to leave the transmission in neutral before exiting the vehicle.

IMPORANT

The transmission must be left in the neutral position.	The vehicles windows must be rolled up.
The vehicles door pins must be in working order.	Do not set reservation mode or remote start with people in the vehicle.

Do not install this remote start on a manual transmission vehicle that has a convertible or removable top.

Activating Reservation Mode

STEP1 : While the vehicle is running, place the transmission in neutral, set the emergency / parking brake, and remove pressure from the foot brake.

STEP2 : Remove the key from the vehicle’s ignition. The vehicle’s engine should remain running even after the key has been removed. If the vehicle does not remain running visit your local authorized Firstech dealer for service.

STEP3 : Exit the vehicle and close the door. The vehicle’s engine should shut off within 10 seconds upon closing the last door. If the vehicle’s engine does not shut off, your door trigger may be functioning improperly. Do not use the remote start feature and take your vehicle to a local authorized Firstech dealer for service.

Once the vehicle shuts off your system is in reservation mode and the vehicle is ready to safely remote start.

IMPORTANT : By default, the system will lock/arm the vehicle upon setting reservation mode. Take care to not lock your keys inside the vehicle.

General System Functions

Cancelling Reservation Mode

Reservation mode will be cancelled for the following reasons;

You did not activate the parking brake prior to turning off the ignition. You pressed the foot brake after the key was removed from the ignition.

You released the parking brake after the key was removed from the ignition.

You entered valet mode, opened the vehicles door, hood, trunk or set off the alarm.

Reservation Mode Settings

Reservation mode settings can be programmed with Option 1-6. It is recommended that reservation mode settings are programmed by your local authorized Firstech dealer.

Default1 : Locks doors when reservation mode is set.

Option2 : Does not lock doors when reservation mode is set.

Option3 : Reservation mode sets 10 seconds after the last door is closed, as opposed to immediately.

This option will allow you to access the vehicle’s rear doors, trunk or hatch prior to the system setting reservation and passively locking/arming.

t @r

Hold button (III) for 2.5 seconds to release the trunk or hatch. If you are in range, the remote will beep twice and the trunk icon will illuminate indicating that the trunk release command has been successfully transmitted.

IMPORTANT: Trunk release is an optional vehicle feature that may require additional parts and labor.

ByFirstech,LLC 18

19 ByFirstech,LLC

General System Functions

a @o @O@w @r Md @O@s @d

Your system is equipped with two additional outputs that can be configured to control windows, open power sliding doors, open a power sliding moon roof, or even turn on a rear defroster. These outputs can be configured for pulsed, timed or latched settings. Your authorized Firstech dealer can set these outputs up accordingly. Using auxiliary outputs to control additional vehicle functions will require additional parts and can be rather labor extensive.

Tap button (II) for 0.5 seconds to trigger auxiliary output 1. Tap button (III) for 0.5 seconds to trigger auxiliary output 2. The remote will beep once and parking lights flash indicating that the auxiliary output(s) have been triggered.

By default, the system is in secure auxiliary mode, which requires you to tap button (IV) for 0.5 seconds prior to triggering auxiliary 1 or 2. To turn off secure auxiliary, ask your authorized Firstech dealer to turn on Option 4-5 to setting II.

t @ @b @q

When in range of your vehicle, the remote will display the vehicle’s temperature, vehicle battery voltage and remote battery voltage (Pro Only) upon tapping button (IV). The temperature will be displayed after tapping button (IV) for 0.5 seconds. Tap button (IV) a second time within four seconds to display the vehicle’s battery voltage. Tap button (IV) a third time within four seconds to display the remote’s battery voltage. (Pro Only)

If you tap button (IV) and you do not get any response from the remote, the remote pager is most likely out of range to receive commands. If you tap button (IV) and the remote reads “FAIL” then your temperature sensor is not installed or may be malfunctioning.

General System Functions

s @a @O@d

Upon lock/arm and unlock/disarm, you can eliminate vehicle’s audible confirmation by muting the siren. Normally, the siren will chirp once to indicate the system is locked/armed and twice to indicate the system is unlocked/disarmed. To mute the siren tap buttons (I+II) simultaneously for 0.5 seconds. When the siren is muted, the siren icon will no longer be displayed on the LCD.

IMPORTANT: Even when the siren is muted, it will still go off in the event the alarm is triggered.

r @m @O@v @m

All Firstech 2 Way LCD remotes have the option to be muted. To make the remote silent you must turn on vibration mode;

STEP 1: Enter remote programming mode by holding down buttons (II + III) simultaneously for 2.5 seconds. The remote will beep once and the LCD will read “Prog” to indicate that you have successfully entered programming mode.

STEP 2 (Pro Remotes): Scroll through the remote options by taping button (IV) for 0.5 seconds. To set vibration mode tap button (IV) five times, or until the vibration mode icon is flashing

STEP 2 (Non Pro Remotes): To set vibration mode simply tap button (IV) one time for 0.5 seconds after entering remote programming mode.

STEP 3: Exit remote programming by holding down buttons (II + III) simultaneously for 2.5 seconds. The remote will beep three times indicating that you have successfully exited programming. The vibration icon will remain illuminated on the LCD indicating the remote is in remote mute/vibration mode.

ByFirstech,LLC 20

21 ByFirstech,LLC