t @o @c
i |
T |
g @s @f |
QV |
|
|
|
s @c |
QV |
|
w @c |
T |
r @c |
QV |
|
|
|
a @l @O@a @ @u @O@d |
QV |
|
q @r |
U |
p @l @O@a |
QW |
|
a @t @r @s @f |
QW |
|||
|
|
|||
v @m |
U |
m @t @r @s @f @Hr @m I |
QX |
|
r @m @M@b @r |
V |
a @r @m |
QX |
|
p @ @c @Hlcd@r @o I |
V |
c @r @m |
QY |
|
Rw @r @b @f |
W |
r @m @s |
QY |
|
Qw @r @b @f |
Y |
t @r |
QY |
|
|
|
aux @o @O@w @r Md @O@s @d |
RP |
|
|
|
t @ @b @q |
RP |
|
|
|
s @a @O@d |
RQ |
|
|
|
r @m @O@v @m |
RQ |
|
|
|
s @s @o Oo |
RR |
a @s @f |
RS |
d @l @O@ @c @d @l |
RS |
t @t @m |
RS |
R c @m @Hm @v @c I |
RT |
c @c @O@rps@Hr @p @s I |
RT |
rps@Hr @p @s I@u @O@d |
RU |
s @v @s |
RV |
t @s @m |
RW |
c @O@h @s @m |
RX |
a @m |
RX |
r @c @O@p @r H I |
SP |
p @Rw @Tb @r |
SP |
t @o @c 
r @s @e @d |
SQ |
a @d |
SR |
l @l @w |
SS |
ByFirstech,LLC 2 |
3 ByFirstech,LLC |
Introduction
Thank you for purchasing a Firstech system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you thoroughly review the following manual. Please note that this manual applies to the 2 Way - 4 Button Liquid Crystal Display Remotes, regardless of whether you purchased the alarm only, starter only or alarm/starter combination. This manual also supports your 1 Way Fiancé remotes that may be included with your system. There are certain features listed in this manual that may not be available for your system. There may also be features listed in this manual that require additional installation or programming before they are active. If you have any questions, please contact the original place of purchase. For further information you may also contact our customer support center by calling 888-820-3690.
Warranty Coverage
Caution: The Manufacture’s warranty will be voided if this product is installed by anyone other than an authorized Firstech dealer. For complete warranty details
!visit www.compustar.com or the last page of this manual. Firstech remotes carry a 1 year warranty from original date of purchase.
Warranty registration can be completed online by visiting www.compustar.com. Please complete the registration form within 10 days of purchase. We do not include a mail in warranty registration card with each unit - registration must be done online. To verify that an authorized dealer installed your system, we highly recommend that you keep a copy of the original proof of purchase, such as the dealer invoice in a safe place.
Quick Reference
v @m
When servicing or loaning your vehicle to others, the system should be placed in Valet Mode. Valet Mode prevents the system from remote starting and disables all alarm functions.
IMPORTANT: While in Valet mode the remote will still control power lock and unlock systems. The parking lights will not flash.
The system can be put into valet one of three ways:
1. Turn the vehicle’s key to the ignition “on” position and tap buttons (I + III) simultaneously for 0.5 second. The parking lights will flash once and the LCD will display Z’s above the vehicle image to confirm the system is in valet mode. Repeat this process to take the system out of valet mode.
The parking lights will flash twice and Z’s will disappear to confirm the system is out of valet mode.
2.If you do not have your remote control, you can put the system into valet by turning the ignition key “on” and then “off” five times within 7 seconds. The parking lights will flash once to confirm the system is in valet mode. Shortly after the first flash, the parking lights will flash twice. A remote control is required to take the system out of valet mode.
3.If your system is set up for a secure valet option (optional), you will not be able to put the system into valet until the proper code has been entered to the secure valet switch. The secure valet switch is the small button with bright blue LED on the front and if installed is the only way to override the alarm and/or remote start. Until programmed, the default code is (3, 3).
ByFirstech,LLC |
4 |
5 ByFirstech,LLC |
Quick Reference
r @m Mb @r
The only regular maintenance this system requires is remote control battery replacement. No programming is required when replacing the battery.
Two Way Remotes:
First, release the battery cover lock located on the back of the remote. Once the lock is released, gently slide the battery cover off to expose the battery. With the exception of the 2WSSR-PRO (Uses 1 AA battery) all Firstech 2 Way remotes require one AAA battery.
IMPORTANT: Be sure to observe correct polarity when installing the battery.
One Way Remotes:
First, remove the small Phillips screw located on the back of the remote. Once the screw has been removed, gently pull the remote apart taking care to not damage the circuit board. 1 Way remote batteries differ among the models. Your battery size should be listed on the battery. Replacements can be purchased from your local Firstech dealer or an electronics store.
p @ @c @Hlcd@r @o I
STEP 1: Enter remote programming mode by holding down buttons (II + III) for 2.5 seconds. The remote will beep once and the LCD will read “Prog” to indicate that you have successfully entered programming mode.
STEP 2 (Pro Remotes): After entering programming mode the time icon will flash indicating to set the time. Adjust the time settings by tapping 
button (I) to change the hour and tapping button (II) to adjust the minutes.
STEP 2 (Non Pro Remotes): After entering programming mode tap button (I) and the time icon will flash to set the time. Adjust the time settings by tapping button (I) to change the hour and tapping button (II) to adjust the minutes.
STEP 3: Once the desired time has been set, exit remote programming by holding down buttons (II + III) for 2.5 seconds. The remote will beep three times indicating that you have successfully exited programming mode.
Quick Reference
R@w @r @b @f
|
Button |
Duration |
AdditionalProgramming |
Function / Description |
|
|
|
|
Required |
|
|
|
I |
0.5 seconds |
no |
Locks doors and/or arms alarm. Tap again to unlock door and / or alarm. |
|
|
|
2.5 seconds |
yes |
Run time extender. Resets remote start and turbo run time while vehicle is remote started |
|
|
II |
0.5 seconds |
no |
Aux 1. Triggers the auxiliary 1 output (most commonly used for rear defrost or window roll-down) |
|
|
2.5 seconds |
no |
Activates the remote start. Repeat and remote start will shut off |
|
|
|
|
||||
|
|
0.5 seconds |
no |
Aux 2. Triggers the auxiliary 2 output (most commonly used for rear defrost or window roll-down) |
|
|
III |
2.5 seconds |
no |
Trunk pop. Triggers the trunk release output and opens the vehicleís trunk |
|
|
|
double tap |
no |
Pro Remotes Only : Turns on the CompuGLO backlight |
|
|
|
0.5 seconds |
no |
CarCheck(updatesvehiclestatusonremotepager)/SecureAuxiliary/TemperatureDisplay/VehicleVoltageDisplay |
|
|
IV |
2.5 seconds |
no |
Panic/vehicle locater (flashes vehicleís parking lights and sounds siren and horn) |
|
|
Pro Remotes Only : Locks buttons and displays "Hold" on screen. |
||||
|
|
|
|
||
|
|
4 seconds |
no |
ProRemotesOnly: Panic / vehicle locater (flashes vehicle's parking lights and sounds siren and horm) |
|
|
I + II |
0.5 seconds |
no |
Turnssirenchirpson/off(Note:Withthesirenchirpsoff,itwillstillsoundintheeventthealarmis triggered) |
|
|
|
|
|
|
|
|
2.5 seconds |
no |
Option programming menu 1. For use during installation |
||
|
|
||||
|
|
|
|
|
|
|
I + III |
0.5 seconds |
no |
Valet mode (see page 8 for details) |
|
|
2.5 seconds |
no |
Turns the shock sensor on/off (Alarm or Alarm / Starter system only) |
||
|
|
||||
|
|
|
|
|
|
ByFirstech,LLC |
6 |
7 ByFirstech,LLC |
Quick Reference
R@w @r @b @f
|
Button |
Duration |
AdditionalProgramming |
Function / Description |
|
|
|
Required |
|
|
I + IV |
0.5 seconds |
yes |
Drive lock. Activates ignition controlled door locks |
|
|
|
|
|
|
|
2.5 seconds |
no |
Option programming menu 2. For use during installation |
|
|
|
|
|
|
|
0.5 seconds |
no |
Activates passive arming (vehicle will arm/lock 30 seconds after the vehicle is disarmed) |
|
II + III |
2.5 seconds |
no |
Accesses remote option programming |
|
|
|
|
(clock, reservation time start, vibrate mode, and RPS on/off) |
|
II + IV |
0.5 seconds |
yes |
Activates timer start mode. Timer start mode has multiple programmable settings: |
|
|
|
duration settings, temperature settings and self start settings. |
|
|
|
|
|
|
|
III + IV |
0.5 seconds |
yes |
Activates Turbo timer mode. |
|
2.5 seconds |
yes |
Activates the 2nd Car function |
|
|
|
|||
|
|
|
|
|
Quick Reference
Q@w @r @b @f
Button |
Duration |
AdditionalProgramming |
Function / Description |
|
|
Required |
|
|
0.5 seconds |
no |
Locks doors and / or arms alarm. |
|
|
|
|
|
3.5 seconds |
no |
Panic/vehicle locater (flashes vehicle’s parking lights and sounds siren and horn) |
|
|
|
|
|
0.5 seconds |
no |
Unlocks doors and / or disarms alarm. |
|
0.5 seconds |
no |
Aux1.Triggerstheauxiliary1output(mostcommonlyusedforreardefrostorwindowroll-down) |
|
|
|
|
|
2.5 seconds |
no |
Trunk release. Triggers the trunk release output and opens the vehicle’s trunk. |
|
|
|
|
|
0.5 seconds |
no |
Aux2.Triggerstheauxiliary2output(mostcommonlyusedforreardefrostorwindowroll-down) |
|
2.5 seconds |
no |
Activates the remote start. Repeat and remote start will shut off |
|
0.5 seconds |
no |
Turns siren on/off (Note: With the siren off, it will still sound in the event the alarm is triggered) |
|
|
|
|
|
2.5 seconds |
no |
Option programming menu 1 - Installers Only |
|
|
|
|
|
0.5 seconds |
no |
Valet mode (see Valet Mode section for details) |
|
2.5 seconds |
no |
Turns the shock sensor on/off. (Alarm or alarm / Starter systems only) |
|
|
|
|
ByFirstech,LLC 8 |
9 ByFirstech,LLC |
Quick Reference
Q@w @r @b @f
Button |
Duration |
AdditionalProgramming |
Function / Description |
|
|
Required |
|
|
0.5 seconds |
yes |
Drive lock. Activates ignition controlled door locks. |
|
|
|
|
|
2.5 seconds |
no |
Option programming menu 2 - Installers Only |
|
|
|
|
|
0.5 seconds |
no |
Activates passive arming (vehicle will arm/lock 30 seconds after the vehicle is disarmed) |
|
0.5 seconds |
yes |
Activates timer start mode. Timer start mode has multiple programmable settings: |
|
|
|
duration settings, temperature settings and self start settings |
|
|
|
|
|
0.5 seconds |
yes |
Activates the built-in Turbo timer function. Additional installation is required when using this |
|
|
|
feature on automatic transmission in vehicle’s |
|
2.5 seconds |
no |
Car Check (updates vehicle status on remote pager) / Secure Auxiliary |
|
|
|
|
If you would like additional information on the functionality of your 1way companion remote, please visit the support page at www.compustar.com to download the full user manual.
Remote LCD(liquid crystal display) Diagram and icons
Your remote pager will indicate the status of your vehicle while in range. The unique LCD design will visually display such icons as lock/unlock status, remote start confirmation and remaining run-time, impact/shock notification, battery voltage, temperature display and much more.
Signal
Strength
Start
Avail
Siren
Vibration
Battery
Aux
Lock |
Shock |
Sens off |
|
Status |
Turbo |
2nd Car
Alarm Clock
Auto
Passive
Ign. Con
Door Locks
Cold Start
Valet
Volage
Temperature
Impact |
Car Call |
Trunk |
|
Hood |
Door |
Parking |
Engine |
Lights |
Running |
ByFirstech,LLC 10 |
11 ByFirstech,LLC |
Loading...