Citizen AT0902-59E, AT0940-50F, AT2100-09E, AT2240-51E, AT2242-55F Instruction manual
...
H50x/H57x Abbreviated instruction
• This watch is light-powered. Be sure your watch is fully charged before use.
• For complete instructions for setting, use, charging time and specifications, refer to the full instruction manual:
H50x/
ENGLISH
H57x instruction manual
Component identification
H50x
Chronograph
second hand
Hour hand
Chronograph
minute hand
Second hand
• Illustrations for reference only. Actual appearance of
your watch may differ from the illustrations above.
H57x
Chronograph
second hand
Hour hand
Chronograph
minute hand
Second hand
• Illustrations for reference only. Actual appearance of
your watch may differ from the illustrations above.
Minute hand
Button
Ⓑ
24-hour hand
Crown
Date indication
Button
Ⓐ
Crown’s position
0 1 2
Minute hand
Button
Ⓑ
24-hour hand
Crown
Date indication
Button
Ⓐ
Crown’s position
0 1 2
Setting the date indication
• Do not adjust the date indication when the watch shows 9:00 PM - 1:00
AM. Otherwise the date indication may change incorrectly.
• Date indication adjustment is required on the first of the following months:
March, May, July, October and December.
Pull the crown out to position 1.
1.
Rotate the crown clockwise to adjust the date indication.
2.
• Counterclockwise rotation moves nothing.
Push the crown in to position 0.
3.
Using the chronograph
Movement Caliber H50x can measure up to 60 minutes by 1 second.
Movement Caliber H57x up to 30 minutes by 1 second.
• The hour, minute and 24-hour hands move normally during chronograph
measurement.
Push the crown in to position 0.
1.
Start/stop:
• Press and release lower right button Ⓐ to return the chronograph
minute hand to 00 minute position before starting measurement if it is
not at the position.
Reset:
• Applying strong shock to the watch during chronograph measurement
may move the chronograph minute hand to an incorrect position. In
such a case, press button Ⓐ securely to return the chronograph minute
hand to 00 minute position.
press and release the upper right button Ⓑ.
press and release lower right button Ⓐ while the chronograph is
stopped.
Adjusting the chronograph second hand to the 0 second position
Execute the operation below when the chronograph second hand does not
return to 0 second position after resetting or the hand points to an incorrect
position because of strong shock or other reasons.
• You cannot execute this operation when the insufficient charge warning
function is activated. You must fully charge your watch.
Pull the crown out to position 2.
1.
Press and hold the upper right button Ⓑ for 3 or more seconds.
2.
• Press and release the upper right button Ⓑ to adjust the chronograph
second hand to 0 second position (12:00 position).
Each time you press the button, the hand moves by 1 second.
Press and hold the button to move the hand continuously.
Push the crown in to position 0.
3.
• Press and release the lower right button Ⓐ to confirm the chronograph
minute hand returns to 00 minute position.
Setting the time
Pull the crown out to position 2 when the second hand
1.
points to 12:00 (0 second).
Rotate the crown to set the time.
2.
• Referring to the 24-hour hand, set the time to ensure proper AM or
PM time is set.
• Move the hands 4 or 5 minutes forward of desired minutes and move
them back to the right time to set the time more precisely.
Push the crown in to position 0 in accordance with a
3.
reliable time source.
The second hand starts moving.
CITIZEN WATCH CO., LTD.
Loading...