Cateye CC-RD200 User Manual

CATEYE STRADA CADENCE

START

CC-RD200

Quick Start

Click the button and follow the in­structions.

Thank you for purchasing our cyclocomputer CATEYE STRADA.

Next

This Quick Start Manual explains how to set up the computer and how to install the unit on
your bicycle.
Please set up the unit according to the specified procedure, then it will be ready for use as a
cyclocomputer.

Before use, read the instruction manual that comes with the product thoroughly
to the end to understand the functions of this unit, and to use it safely in a
correct manner.

This PDF contains a movie file.

Next

When you click on the movie screen, a message regarding security appears. Click the
“Trust in the text” or “Play” button to close the message.
Click the screen again to play the movie.

CATEYE STRADA CADENCE

Return to Cover

Setting up the computer

How to install the sensor

How to install the bracket (movie)

Quick Start Manual

Click the item you wish to view.

Contents

Operation of buttons

MODE

MENU

Next

Set up the computer by operating the buttons as follows.
Check the button position before you start setting up.

Back

Press the MENU button and the MODE
button on the back of the computer.

CATEYE STRADA CADENCE

ACAC

Return to Contents

Next

Return

Quick Start Manual

Clear all data (initialization)

Setting the speed unit

Entering the tire

circumference

Setting the clock display

Setting the hour

Setting up the computer

Clear all data (initialization)

Press the AC button on the back of the computer.
After full lighting of the screen, the computer switch-

es to the speed unit setting screen to start setup.

Setting the minute

Measuring screen

(Setup completed)

Full lighting Setting the speed unit

CATEYE STRADA CADENCE

MENU

MODE

Return to Contents

Next

Return

Quick Start Manual

Clear all data (initialization)

Setting the speed unit

Entering the tire

circumference

Setting the clock display

Setting the hour

Setting the speed unit

Setting up the computer

Setting the speed unit

When the MODE button is pressed, either “km/h” or “mph”
is selected for the speed unit display. Select the display of
your choice.

After selecting, press the MENU button to proceed to the
next step “Entering the tire circumference”.

km/h ↔ mph

To the next step

Setting the minute

Measuring screen

(Setup completed)

CATEYE STRADA CADENCE

MENU

MODE

MODE

Return to Contents

Next

Return

Tire circum-

ference refer-

ence table

Quick Start Manual

Clear all data (initialization)

Setting the speed unit

Entering the tire

circumference

Setting the clock display

Setting the hour

Entering the tire

circumference

Setting up the computer

Entering the tire circumference

Enter the tire circumference (mm) of your bicycle with 4
digits using the tire circumference reference table.
Pressing the MODE button increases the value flashing,
and pressing and holding the MODE button moves to the
next digit.
After entering, press the MENU button to proceed to the
next step “Setting the clock display”.

Move digitTo the next step

To the next step

Setting the minute

(Setup completed)

Measuring screen

(Press and hold)

CATEYE STRADA CADENCE

MODE

MODE

Return to Contents

Next

Return

Quick Start Manual

Clear all data (initialization)

Setting the speed unit

Entering the tire

circumference

Setting the clock display

Setting the hour

Clock display

Setting up the computer

Setting the clock display

When you press and hold the MODE button, “24h” flashes.
When the MODE button is pressed, either “12h” or “24h”

is selected for the clock display. Select the display of
your choice.

After selecting, press and hold the MODE button to pro­ceed to the next step “Setting the hour”.

24h ↔ 12h

To the next step

Setting the minute

Measuring screen

(Setup completed)

(Press and hold)

CATEYE STRADA CADENCE

MODE

MODE

Return to Contents

Next

Return

Quick Start Manual

Clear all data (initialization)

Setting the speed unit

Entering the tire

circumference

Setting the clock display

Setting the hour

Hour

Setting up the computer

Setting the hour

Pressing the MODE button increases the value flashing
(“Hour” of the clock). Enter any value.

After entering, press and hold the MODE button to pro­ceed to the next step “Setting the minute”.

To the next step

To the next step

Setting the minute

Measuring screen

(Setup completed)

(Press and hold)

CATEYE STRADA CADENCE

MENU

MODE

Return to Contents

Next

Return

Quick Start Manual

Clear all data (initialization)

Setting the speed unit

Entering the tire

circumference

Setting the clock display

Setting the hour

Minute

Setting up the computer

Setting the minute

Pressing the MODE button increases the value flashing
(“Minute” of the clock). Enter any value (Pressing and
holding MODE rapidly increases the value).

After entering, press the MENU button to switch to the
measuring screen.

To the next step

Setup is completed

To the measuring screen

Setting the minute

Measuring screen

(Setup completed)

CATEYE STRADA CADENCE

Return to Contents

Next

Return

Return to Contents

Quick Start Manual

Clear all data (initialization)

Setting the speed unit

Entering the tire

circumference

Setting the clock display

Setting the hour

Setting up the computer

Now, setup of the computer is completed.

If the bracket and sensor are not installed on your bicycle,
return to Contents, click “How to install the bracket” and
How to install the sensor”, and then install them accord­ing to the instructions.

Measuring screen

Setting the minute

Measuring screen

(Setup completed)

CATEYE STRADA CADENCE

Return to Contents

Quick Start Manual

How to install the bracket

The Bracket being used in this movie is for wireless products and • there is no wire attached.
When you install the bracket band to your bicycle, tighten it so the wire will not be pinched by the stem •

or handlebar.

Prepare the following parts from the packaged items.

Next

Wheel magnet Cadence magnet

Cadence sensor

Speed sensor

Sensor rubber pad

Nylon ties (x10)

CATEYE STRADA CADENCE

Return to Contents

Next

Return

Quick Start Manual

Install the speed sensor

Install the wheel magnet

Install the cadence sensor

Install the cadence magnet

Adjust the positions of the

sensor and magnet

Adjust the clearance between

the sensor and magnet

How to install the sensor

Install the speed sensor

Temporarily secure the speed sensor to the inside
of the left chain stay of your bicycle with two nylon
ties.

Tighten the speed sensor to such an extent that it
can be moved.

Speed sensor

Front

Nylon ties

Route the cable

Fixing the sensor and magnet

(Installation is completed)

Left Chain Stay

CATEYE STRADA CADENCE

Return to Contents

Next

Return

Quick Start Manual

Install the speed sensor

Install the wheel magnet

Install the cadence sensor

Install the cadence magnet

Adjust the positions of the

sensor and magnet

Adjust the clearance between

the sensor and magnet

How to install the sensor

Install the wheel magnet

Temporarily secure the wheel magnet to the left
spoke of the rear wheel.

Tighten the wheel magnet to such an extent that it
can be moved.

Rear wheel spoke

Wheel magnet

Route the cable

Fixing the sensor and magnet

(Installation is completed)

Speed sensor

To the SENSOR LINE

CATEYE STRADA CADENCE

Return to Contents

Next

Return

Quick Start Manual

Install the speed sensor

Install the wheel magnet

Install the cadence sensor

Install the cadence magnet

Adjust the positions of the

sensor and magnet

Adjust the clearance between

the sensor and magnet

How to install the sensor

Install the cadence sensor

Temporarily secure the cadence sensor to the out­side of the left chain stay of your bicycle with two
nylon ties.

When the clearance with the cadence magnet is *
more than 3 mm, install the cadence sensor with
sensor rubber pads in layers. When temporarily
securing, keep allowance for sensor rubber pads.

Nylon ties

Left Chain Stay

Route the cable

Fixing the sensor and magnet

(Installation is completed)

Front

Cadence sensor

CATEYE STRADA CADENCE

Return to Contents

Next

Return

Quick Start Manual

Install the speed sensor

Install the wheel magnet

Install the cadence sensor

Install the cadence magnet

Adjust the positions of the

sensor and magnet

Adjust the clearance between

the sensor and magnet

Route the cable

How to install the sensor

Install the cadence magnet

Temporarily secure the cadence magnet to the in­side of the left crank with nylon ties.

Tighten the cadence magnet to such an extent that
it can be moved.

Left crank (Inside)

Nylon ties

Cadence magnet

Cadence sensor

To the SENSOR LINE

Fixing the sensor and magnet

(Installation is completed)

CATEYE STRADA CADENCE

Return to Contents

Next

Return

Quick Start Manual

Install the speed sensor

Install the wheel magnet

Install the cadence sensor

Install the cadence magnet

Adjust the positions of the

sensor and magnet

Adjust the clearance between

the sensor and magnet

Route the cable

Fixing the sensor and magnet

(Installation is completed)

How to install the sensor

Adjust the positions of the sensor and magnet

Adjust the positions so that the wheel magnet pass­es through the SENSOR LINE of the speed sen­sor, and the cadence magnet passes through the

SENSOR LINE of the cadence sensor.

SENSOR LINE
(Cadence sensor)

Wheel magnet

SENSOR LINE
(Speed sensor)

Cadence

magnet

CATEYE STRADA CADENCE

3 mm

3 mm

Return to Contents

Next

Return

Quick Start Manual

Install the speed sensor

Install the wheel magnet

Install the cadence sensor

Install the cadence magnet

Adjust the positions of the

sensor and magnet

Adjust the clearance between

the sensor and magnet

Route the cable

Left Chain Stay (Outside)

Cadence sensor

How to install the sensor

Adjust the clearance between the sen­sor and magnet

Adjust the clearances between the speed sensor and
wheel magnet and the cadence sensor and cadence
magnet, so that both of them are within 3 mm.

When the clearance between the cadence sensor *
and cadence magnet is more than 3 mm, install the
cadence sensor with sensor rubber pads in layers.

Left Chain Stay (Inside)

Wheel magnet

Speed sensor

Fixing the sensor and magnet

(Installation is completed)

Cadence magnet

CATEYE STRADA CADENCE

Return to Contents

Next

Return

Quick Start Manual

Install the speed sensor

Install the wheel magnet

Install the cadence sensor

Install the cadence magnet

Adjust the positions of the

sensor and magnet

Adjust the clearance between

the sensor and magnet

How to install the sensor

Route the cable

Fix the wire to the frame with nylon ties where ap­plicable, and route it to the handle while winding
around the brake cable. Cut off any excess nylon tie
using a nipper.

Caution: Adjust this

not stretched when you turn the handle.

section so that the wire is

Nylon ties

Route the cable

Fixing the sensor and magnet

(Installation is completed)

CATEYE STRADA CADENCE

Return to Contents

Next

Return

Return to Contents

Quick Start Manual

Install the speed sensor

Install the wheel magnet

Install the cadence sensor

Install the cadence magnet

Adjust the positions of the

sensor and magnet

Adjust the clearance between

the sensor and magnet

How to install the sensor

Fixing the sensor and magnet

Firmly tighten each sensor and magnet, and cut off
any excess nylon tie using a nipper.

Now, sensor installation is completed. See how to in­stall the bracket, and then complete the installation.

When the computer is not set up, return to Con­tents, click “Setting up the computer”, and follow
the instructions.

Route the cable

Fixing the sensor and magnet

(Installation is completed)

CATEYE STRADA CADENCE

L mm

Return to Contents

Return

Quick Start Manual

Tire circumference reference table

ETRTO

Tire size

47-203 12x1.75 935
54-203 12x1.95 940
40-254 14x1.50 1020
47-254 14x1.75 1055
40-305 16x1.50 1185
47-305 16x1.75 1195
54-305 16x2.00 1245
28-349 16x1-1/8 1290
37-349 16x1-3/8 1300
32-369 17x1-1/4 (369) 1340
40-355 18x1.50 1340
47-355 18x1.75 1350
32-406 20x1.25 1450
35-406 20x1.35 1460

Measure the tire circumference (L) of your bicycle

L (mm)

ETRTO

Tire size

40-406 20x1.50 1490
47-406 20X1.75 1515
50-406 20x1.95 1565
28-451 20x1-1/8 1545
37-451 20x1-3/8 1615
37-501 22x1-3/8 1770
40-501 22x1-1/2 1785
47-507 24x1.75 1890
50-507 24x2.00 1925
54-507 24x2.125 1965
25-520 24x1 (520) 1753

24x3/4 Tubular 1785
28-540 24x1-1/8 1795
32-540 24x1-1/4 1905

L (mm)

ETRTO

Tire size

25-559 26x1 (559) 1913
32-559 26x1.25 1950
37-559 26x1.40 2005
40-559 26x1.50 2010
47-559 26x1.75 2023
50-559 26x1.95 2050
54-559 26x2.10 2068
57-559 26x2.125 2070
58-559 26x2.35 2083
75-559 26x3.00 2170
28-590 26x1-1/8 1970
37-590 26x1-3/8 2068
37-584 26x1-1/2 2100

650C Tubular 26x7/8 1920

L (mm)

Setting up the computer

ETRTO

Tire size

20-571 650x20C 1938
23-571 650x23C 1944
25-571 650x25C 26x1 (571) 1952
40-590 650x38A 2125
40-584 650x38B 2105
25-630 27x1 (630) 2145
28-630 27x1-1/8 2155
32-630 27x1-1/4 2161
37-630 27x1-3/8 2169
18-622 700x18C 2070
19-622 700x19C 2080
20-622 700x20C 2086

23-622

700x23C 2096

25-622 700x25C 2105

L (mm)

ETRTO

Tire size

28-622 700x28C 2136
30-622 700x30C 2146
32-622 700x32C 2155

700C Tubular 2130
35-622 700x35C 2168
38-622 700x38C 2180
40-622 700x40C 2200
42-622 700x42C 2224
44-622 700x44C 2235
45-622 700x45C 2242
47-622 700x47C 2268
54-622 29x2.1 2288
60-622 29x2.3 2326

L (mm)

Adjust the tire pressure properly. With the rider’s weight applied on the bicycle,
roll the wheel one tire revolution with reference to a marker such as the valve, and
measure the travel distance on the ground.