Cateye Bicycle Accessories User Manual

IMPORTANT NOTICE ABOUT INSTALLATION

CCMAT1-010417 1 Printed in Japan

066600110

In order to make this model suitable for MTB, some of the parts have been changed. When mounting to bicycle, follow the explanation written in this sheet, not the instruction manual.

Parts

1 Bracket 2 Wire 3 Sensor 4 Magnet 5 Bracket Rubber Pad (2 pcs.) 6 Nylon Tie (5 pcs.) 7 Spiral Tube 8 Lithium Battery CR2032

1. Installation (Instead of following the explanation in 11-12 pages of the instruction manual, follow the explanation below.)

IMPORTANT

Attach the sensor and the magnet properly so that their positions meet the following conditions

Align the magnet’s center and the sensor’s

marking line while rotating the wheel.

The clearance between the sensor and the

magnet should be less than 5mm.

1. Attach the sensor temporarily, with the adhesive tape, to the inside of the right front fork (fig. 3).

2. Attach the magnet to the right side spoke of the front wheel (fig. 4). Align the magnet’s center and the sensor’s marking line (fig. 1).

3. Adjust the position of the sensor so that the clearance between the sensor and the magnet is less than 5mm (fig. 2). Fix the sensor with the nylon ties (fig.5). Cut off the excess.

4. Secure the wire along the f ork with the nylon ties (fig. 6), and along the outer cable with the spiral tube. Allow enough wire clearance in the area marked with

5. Apply the bracket rubber pad to the bracket, and fix the bracket near the handlebar stem.(fig.7)

and B.

nylon tie

marking line

magnet’s center

Fig.1

sensor

Fig.3

adhesive tape

bracket

front fork

spiral tube

nylon tie

sensor

magnet

Fig.2

Fig.5

front fork

sensor

less than 5mm

Fig.4

nylon tie

spoke

magnet

bracket

Main Unit

Slide the main unit from front until it clicks into position. The contact is automatically connected. To remove, slide it while pushing the lever (fig. 8).

Fig.6

slide

rubber pad

Fig.7

Test

Install the main unit onto the bracket. Spin the front wheel and see if the speed appears in the displa y. If not, re-adjust the position of the sensor and the magnet so that it meets the conditions

and B in the “IMPORTANT” column.

front

Fig.8

lever

#169-9730N Heavy Duty Wire and Bracket Sensor Kit

#169-6560N[#169-6565N] Bracket Sensor Kit [Long]

#169-6567[#169-6562] Center Mount Bracket Kit [Long]

#169-6569 Stem Mount Bracket Kit

#169-9752 Attachment Kit

#169-9691 Wheel Magnet

#169-9835 Wrist Band

#169-9860 Main Unit Holder

SPARE ACCESSORIESSPARE ACCESSORIES

#169-9880 Altitude Sensor Cover/Filter

#166-5155 Lithium Battery (CR2032)

2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan e-mail: service@cateye.com URL: http://www.cateye.com

.,LTD.

Kit de Fil Renforce et Supports d´Unité Principale et de Détecteur

Nachrüstset mit Halterung, Sensor und verstärktem Sensorkabel Filo Ultra Resistente e Attacco Completo Kit Soporte del Sensor y Alambre de Servicio Pesado

Extra sterke kabel en bracket sensor set

ヘビーデューティブラケットセンサーキット

Kit de montage de l'unité principale et du détecteur [Longs]

Halterung und Sensorkabel [Lang] Kit supporto unità principale e sensore [Lunghi] Kit Soporte del Sensor [Largo]

bracket sensor kit

ブラケットセンサーキット[ロング]

Kit de montage central de l'unité principale [Longs]

Halterung für Montage an der Lenkermitte [Lang] Kit di montaggio al centro del manubrio [Lunghi] Kit Soporte para Montaje Central [Largo]

centrum bevestigings bracket kit

センターマウントキット[ロング]

Kit de montage de l'unité principale sur la broche du guidon

Halterung für Montage an der Lenkerstange Kit di montaggio sull'attacco manubrio Kit Soporte para Montaje en Tija

stuurpen bevestigings bracket kit

ステムマウントキット

Kit de Fixation

Befestigungsmaterial Guarnizioni in gomma per il montaggio Kit de Accesorios

bevestigings kit

アタッチメントキット

Aimant de Roue

Radmagnet Magnete per ruota Imán de Rueda

wielmagneet

ホイールマグネット

Bracelet

Handgelenkband Supporto a bracciale per la sola funzione di altimetro Correa de Muñeca

polsband

リストバンド

Etui pour unité principale

Hauptgeräthalterung Custodia dell'unità principale Soporte de Unidad Principal

computer houder

メインユニットフォルダー

Couvercle du Détecteur d'Altitude/Filtre

Höhensensordeckel / Filter Protezione del filtro e del sensore dell'altitudine Tapa del Sensor de Altitud/Filtro

hoogtesensor deksel / filter

高度センサーキャップ／フィルター

Pile au lithium (CR2032)

Lithiumbatterie (CR2023) Batteria al litio (CR2032) Batería de Litio (CR2032)

Lithium batterij (CR2032)

リチウム電池(CR2032)