Carnes SSHA User Manual

Imperial [IP] Dimensions

Metric (SI) in Parentheses

CARNES COMPANY 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone: [phone] Fax: [phone] www.carnes.com

SPECIFICATION SHEET

MODEL SSHA

HALF-ROUND SUPPLY DIFFUSER

COPYRIGHT © 2013 CARNES COMPANY

ALL RIGHTS RESERVED

SUPERSEDES 12136-H 12136-I

Notes:

1. Construction is steel.

2. Standard finish is electrocoat acrylic baked enamel. Other finishes are available on request.

3. Standard color is #11 Bright White. Other colors are available on request.

4. Core is removable by removing knurled nuts and lifting core out.

5. Recommended balancing damper is opposed blade model KXJA.

H

C
D

G

E

F

KNURLED
NUTS

A
B

Dim Description 06 08 10 12 14 16 18 20

A Collar ID Dimension 1 6-1/8” 8-1/8” 10-1/8” 12-1/8” 14-1/8” 16-1/4” 18-1/4” 20-1/4”

(156) (206) (257) (308) (359) (413) (464) (514)

B Form OD 14-1/4” 18-3/4” 23-/18” 27-1/4” 31-7/16” 37-1/2” 40-15/16” 45-13/16”

(362) (476) (587) (692) (799) (953) (1040) (1148)

C Height Above Ceiling 4-1/4” 5-1/8” 5-7/16” 5-7/8” 6-1/4” 6-1/2” 6-7/8” 8-1/4”

(108) (130) (138) (149) (159) (165) (175) (210)

D Total Height 4-3/4” 5-5/8” 5-15/16” 6-5/8” 7” 7-5/8” 8” 8-3/8”

(121) (143) (151) (168) (178) (194) (203) (213)

E Collar Height 1” 1” 1” 1” 1” 2” 2” 2”

(25) (25) (25) (25) (25) (51) (51) (51)

F Ceiling Opening Radius 6” 7-7/8” 9-7/8” 11-3/4” 13-3/4” 16” 17-5/8” 19-5/8”

(152) (200) (251) (298) (349) (406) (448) (498)

G Wall Flange Width 11/16” 7/8” 7/8” 1-5/16” 1-5/16” 1-15/16” 1/2” 1-9/16”

(17) (22) (22) (33) (33) (49) (13) (40)

H Collar ID Dimension 2 3-1/16” 4-1/16” 5-1/16” 6-1/16” 7-1/16” 8-1/8” 9-1/8” 10-1/8”

(78) (103) (129) (154) (179) (206) (232) (257)