Carnes SSEA User Manual

SPECIFICATION SHEET

MODEL SSEA

Imperial [IP] Dimensions

Metric (SI) in Parentheses

CARNES COMPANY 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone: [phone] Fax: [phone] www.carnes.com

Application

Use with Models SSEA and SSDB to result in easier, lower cost,
quicker and higher quality installation of round diffusers in suspended
ceilings

Features

• Diffuser sizes 14” and smaller can be set in a panel to fit 24” x 24”
T-bar ceilings.

• This panel will work with 9/16”, 15/16” or 1-1-/2” flat face T-bar.

• Panels to fit other types and sizes of suspended ceilings are
available on request.

• Panel construction is steel.

Installation Notes

• Note that the diffuser inlet is still oversized to fit the duct inside.
This eliminates air leakage, but requires the use of hard duct
connection to the diffuser.

Dimensional Data

T-BAR PANEL

OPTION T

A

B

23-3/4”

Model SSEA 4” 5” 6” 8” 10” 12” 14”
Upward Projection (A) 1-15/16” 2-9/16” 2-3/16” 2-3/8” 2-3/8” 2-3/8” 2-1/2”

Downward Projection (B) 3/4” 3/4” 3/4” 1” 1/2” 7/8” 13/16”

COPYRIGHT © 2014 CARNES COMPANY

ALL RIGHTS RESERVED

12059