Carnes SPXC 112 06 User Manual

SPECIFICATION SHEET

MODEL SPXC

PERFORATED FACE ROTATING CORE SUPPY DIFFUSER

STEEL, ROUND NECK, SURFACE MOUNT

CARNES COMPANY © 2007 COPYRIGHT

ALL RIGHTS RESERVED

SUPERSEDES 12673 12673-A

Imperial [IP] Dimensions

Metric (SI) in Parentheses

CARNES COMPANY 448 S. Main St., P. O. Box 930040, Verona, WI 53593-0040 Phone: [phone] Fax: [phone] www.carnes.com

Detail of perforated hole pattern

Corner blow adjustment

Free area is approximately 51%

Recommended Ceiling Opening is

Nominal Face Size - 3/4” (19).

The core can be rotated as a

single piece to discharge into the

corners. Adjustment is done

without removing.

Nom.

Face

Size

+1/2”

(13)

Model Nom. Face Round Neck Unit
Number Size Nom. Size (A) Height (C)

SPXC 112 06 12” x 12” 6” (152) 2-1/2”
SPXC 112 08 (305 X 305) 8” (203) (64)
SPXC 222 06 6” (152)
SPXC 222 08 8” (203)
SPXC 222 10 24” X 24” 10” (254) 2-3/4”
SPXC 222 12 (610 X 610) 12” (305) (70)
SPXC 222 14 14” (356)
SPXC 222 16 16” (406)

NOTES:

1. Standard construction on SP model is steel. Aluminum face plate is available
on request (Options A & B).

2. Standard construction on SL model is aluminum ceiling plate and face plate.

3. Standard finish is electrocoat acrylic baked enamel.

4. Standard color is #11 Bright White. Other colors are available on request.

5. Round neck is undersized by 1/8” (3) to fit inside the duct.

6. Recommended balancing damper is model KXMB damper.

7. Metric dimensions are given in millimeters.