This guide is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws,
this guide may not be reproduced in any form, in whole or in part, without the prior written consent
of Canon U.S.A., Inc.
The purpose of this guide is to aid end users by summarizing pertinent information about
Bubble Jet Direct. All statements, technical information and recommendations in this guide are
believed reliable, but the accuracy and completeness thereof are not guaranteed or warranted,
and they are not intended to be, nor should they be understood to be, representations or warranties
concerning the products described.
Specifications are subject to change without notice.
NERGY STAR
As an E
the E
NERGY STAR
partner, Canon U.S.A. Inc., has determined that this product meets
guidelines for energy efficiency.
All information regarding non-Canon products was compiled from publicly available information.
No representation is made regarding the accuracy thereof.
Trademarks
Canon is a registered trademark of Canon Inc. All other product and brand names are trademarks
of their respective owners.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
Bubble Jet Direct is a product feature that allows you to print photos directly from
a compatible Canon camera without the use of a computer.
The PowerShot cameras connect to the Bubble Jet printer through the cable
supplied with the printer.
Connecting the Camera to the Printer
When printing photos from your camera on your Bubble Jet
printer, using the camera’s optional AC adapter to power the
camera is preferred. If you choose to use the battery pack, always
make sure it is fully charged, or the printing may stop when the
charge on the camera battery diminishes.
1.
Turn on the printer.
2.
Make sure the digital camera is turned off.
3.
Open the protective terminal
cover on the side of the
camera to locate the cable
jack. Then connect the camera
to the printer as shown,
making sure the “Canon” logo
on the cable faces the front of
the camera (lens side).
DIGITAL
Terminal
Digital Camera
Connection Cable
1
Getting Started
Direct Interface
Cable DIF-B250
4.
S200/S330/G2 Black Users Only:
Turn on the digital camera.
5.
When connecting the PowerShot S30/S40/
S330 camera to a Bubble Jet printer:
•
Use the DIF-B100 direct interface cable
provided with the printer. When you insert
the cable, make sure the symbol on the
cable connector faces the rear of the camera.
When connecting the PowerShot S200/
G2 Black camera:
Use the DIF-B250 direct interface cable
•
provided with the printer. When you insert
the cable, make sure the symbol on the
cable connector faces the rear of the camera.
Set the camera’s Mode dial to .
Direct Interface
Cable DIF-B100
6.
Thesymbol appears on the camera LCD monitor, and the power/mode
indicator is lit (green) when the printer is properly connected to the camera.
See the
on installing paper and ink cartridges in the printer.
Quick Start Guide
for your Bubble Jet printer for instructions
Disconnecting the Camera from the Printer
1.
To remove the camera cable, disconnect the cable on the printer side and turn
off the digital camera.
When you detach the cable from the camera, hold the plug, and
do not pull by the cable.
When the printer is disconnected, the symbol disappears from the LCD
2.
monitor, and the camera reverts to standard replay mode.
2
Chapter 2:
Camera Overview
The following digital cameras are shown and described in this chapter:
•
Canon PowerShot S30/S40 digital camera
Canon PowerShot S200/S330 Digital Elph camera
•
•
Canon PowerShot G2 Black digital camera
3
Camera Overview
PowerShot S30/S40 Camera Front View
See the
PowerShot S30/S40 Camera User Guide
ZOOM Lever
for more information.
A/V OUT
(Audio/Video Out)
Terminal
DIGITAL
Terminal
Terminal Cover
4
Camera Overview
PowerShot S30/S40 Camera Back/Bottom View
See the
PowerShot S30/S40 Camera User Guide
for more information.
LCD Monitor
5
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.