Printing Photographs Directly from a Compliant Device12
Replacing an Ink Tank16
Reading the On-screen Manuals18
BE
QT5-0456-V01
Exif Print
This machine supports ExifPrint.
Exif Print is a standard for enhancing the communication between digital cameras and
printers. By connecting to an Exif Print-compliant digital camera, the camera’s image data at
the time of shooting is used and optimized, yielding extremely high quality prints.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise emissions from a
digital apparatus as set out in the interference-causing equipment standard entitled “Digital
Apparatus,” ICES-003 of the Industry Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux
appareils numériques de Classe B prescrites dans la norme sur le matériel brouilleur NMB003 d'Industrie Canada intitulée « Appareils numériques ».
International ENERGY STAR® Program
As an ENERGY STAR® Partner, Canon Inc. has determined that this product meets the
ENERGY STAR guidelines for efficiency.
The International ENERGY STAR
program that promotes energy saving through the use of computer and other
office equipment. The program backs the development and dissemination of
products with functions that effectively reduce energy consumption. It is an
open system in which business can participate voluntarily. The targeted
products are office equipment such as computers, monitors, printers, faxes
and copiers.
Their standards and logos are uniform among participating nations.
®
Office Equipment Program is a global
Power Requirements
Never use a power supply voltage other than that supplied in the country of purchase. Using
the incorrect voltage could cause a fire or electric shock. The correct power supply voltages
and frequencies are as follows:
AC 100-240 V, 50/60 Hz
About Consumables
Consumables (ink tanks / FINE Cartridges) are available for 5 years after production has
stopped.
Safety Precautions
Warning
z Never attempt to plug the power cord into the power outlet or unplug the power cord when your hands are wet.
z Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy objects on the
power cord.
z Never use any power supply other than the standard power supply available in the country of purchase. Using
the incorrect voltage and frequency could cause a fire or electric shock.
z Always push the plug all the way into the power outlet.
Caution
z For safety reasons, store ink tanks out of the reach of small children.
z Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands.
.
Also read the Safety Precautions in the User’s Guide on-screen manual. Observe the warnings and
cautions to avoid personal injury or damage to the machine.
Model Number: K10281 (MP510)
Introduction
Thank you for purchasing the Canon MP510.
This Quick Start Guide uses the following symbols to indicate important information. Always observe
the instructions indicated by these symbols.
Warning
Instructions that, if ignored, could result in death or serious personal injury caused by incorrect
operation of the equipment. These must be observed for safe operation.
Caution
Instructions that, if ignored, could result in personal injury or material damage caused by incorrect
operation of the equipment. These must be observed for safe operation.
Important
Instructions that must be observed for safe operation.
Trademark Notices
z “Windows” and “Internet Explorer” are trademarks of Microsoft Corporation, registered in the United
States and other countries.
z “Macintosh” and “Mac” are trademarks of Apple Computer, Inc., registered in the U.S. and other
countries.
z “Adobe” and “Adobe RGB (1998)” are either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
z “SmartMedia” is a trademark of Toshiba Corporation.
z “MEMORY STICK”, “Memory Stick PRO”, “MEMORY STICK Duo” and “Memory Stick Pro Duo” are
trademarks of Sony Corporation.
z “xD-Picture Card” is a trademark of Fuji Photo Film Co., Ltd.
z “MultiMediaCard” is a trademark of Infineon Technologies AG.
z “SD Secure Digital memory card” and “miniSD Card” are trademarks of SD Association.
All rights reserved. No part of this publication may be transmitted or copied in any form whatsoever
without the express written permission.
Selecting the Language for the LCD
1Press the COPY button, wait for 5 seconds, and then press the MENU button.
2Press the ] button once, then press the OK button.
3Press the ] button once, then press the OK button.
4Press the } button three times, then press the OK button.
If the Bluetooth Unit is connected, press the } button four times, then press the OK button.
5Use the { or } button to select the language you want to be displayed, then press
the OK button.
1Introduction
Preparing the Machine
Be sure to read your setup sheet first for setting up your machine and getting it ready for use.
Unpack the machine
Please confirm the included items against the illustration printed on the lid of the packing box.
Important
z Do not connect the USB cable until after the software is installed.
z A USB cable is necessary to connect the machine with your computer.
1Turn on the machine.
Caution
Be sure to remove the tapes before you turn on the machine.
Note
z The tape position is subject to change.
z Plug the power cord all the way in, since it may be difficult to plug.
z If you have an undesired language, see “Selecting the Language for the LCD” on page 1.
2Install the Print Head.
Caution
Do not touch internal parts other than the Print Head Lock Lever.
Important
If the Scanning Unit (Printer Cover) is open for more than 10 minutes, the Print Head Holder
moves to the right side. In this case, close the Scanning Unit (Printer Cover), and open it again.
Note
z There might be some transparent or light blue ink on the inside of the bag the print head comes
in, or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink
on yourself when handling these items.
z Do not reattach the protective cap once it has been removed.
3Install the ink tanks.
Important
z Make sure that all the ink tanks are installed in the correct position, matching the label. The
machine cannot be used unless all the ink tanks are installed.
z Wait for about 2 minutes, until the machine has stopped making operating noises, before
proceeding.
Note
z Be sure to remove the clear film from the ink tank in the exact order as shown in step 3 of your
setup sheet.
z Do not squeeze the side of ink tanks as this may cause the ink to leak out and stain your clothes
and hands.
z Do not reattach the protective cap once you have removed it.
z An error message will be displayed on the LCD if an ink tank is not installed properly. Open the
Scanning Unit (Printer Cover) and make sure that position of all the ink tanks match the label.
2Preparing the Machine
Installing the MP Drivers
Information Common to Windows® and Macintosh
Notes on the Installation Process
z If the Select Language screen appears, select a language, then click Next.
z If the Select Your Place of Residence screen appears, select your place of residence, then
click Next.
z There are two ways of installing the MP Drivers and other software:
Easy Install: the items included on the
Custom Install: you can select particular items to install
z When the User Registration screen appears, click Register. If your computer is connected
to the Internet, the on-screen instructions to register your product will appear.
Setup CD-ROM are installed automatically
®
Information for Windows
Note
z When installing the MP Drivers in Windows XP or Windows 2000, log on to the system as a
member of the Administrators group.
z Before installing the drivers, disable all anti-virus
programs and automatically loading programs.
z If the following screen appears automatically, remove
the USB cable connected to your computer. Next, click
Cancel to quit the screen and turn off the machine. Then
start the installation process again. For details on the
installation process, refer to your setup sheet.
z To install Adobe® RGB (1998), click Custom Install and
follow the instruction on the screen.
z Adobe RGB (1998) cannot be installed in Windows Me
and Windows 98.
z When a message asking for your confirmation to restart
your computer appears during the installation process,
click OK. The system is restarted automatically.
z If the connection is not recognized, refer to “Cannot
Install the MP Drivers” in the User’s Guide on-screen
manual
.
Information for Macintosh
Note
z Before installing the MP Drivers, disable all anti-virus programs and automatically loading
programs or remove them from your system folder.
z To install the User’s Guide on-screen manual in a language other than the installed one,
double-click the Manual folder in Setup CD-ROM, Canon folder, and then copy a language
folder to your hard disk.
3Installing the MP Drivers
Loading Printing Paper
You can load A4, Letter, or B5-sized plain paper in the Front Feeder. You cannot load any other
paper in the Front Feeder. For information on loading paper in the Auto Sheet Feeder, refer to the
User's Guide on-screen manual.
Important
z If you cut plain paper to 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, or 2.13" x 3.39" / 54.0 x
86.0 mm (credit card-size) for a trial print, it can cause paper jams.
z Always load paper in portrait orientation. Loading paper in landscape orientation can cause the paper
to be jammed.
1Open the Front Feeder (A).
2Extend the Paper Output Support
(B).
3Press the Paper Feed Switch
(C) so that the Front Feeder
lamp (D) lights.
(B)(A)
4Set the position of the Paper Thickness Lever (E) to the left.
5Load the paper in the Front Feeder with
the print side facing DOWN, aligning the
paper stack against the right edge of the
Front Feeder.
Do not load higher than the Load Limit Mark (A).
(C)
(A)
6Align the edge of the paper with the Paper
Size Mark (B).
7Pinch the paper guide (C) and slide it
against the left side of the loaded paper
stack.
(C)
(D)(E)
(B)
4Loading Printing Paper
Printing from Your Computer
This section describes the procedure for basic printing.
Printing with Windows
1
Turn on the machine and load the paper in the machine.
2Make sure that the proper paper source is selected.
3Create a document or open a file to print using an appropriate application software.
4Select Print on the application software’s File
menu.
5Make sure that Canon MP510 Printer is
selected, and click Preferences (or
Properties).
6Specify the required settings and click OK.
Make sure that Paper Feed Switch is selected in
Paper Source.
Note
z If you select Front for Plain Paper, the machine
will automatically switch to the Front Feeder when
Plain Paper is specified for Media Type. You
cannot load paper other than A4, Letter, or B5-sized
plain paper in the Front Feeder.
z For details on other printer driver functions, click
Help or Instructions to view the online help or the
Printer Driver Guide on-screen manual.
Instructions is only displayed when the on-screen
manuals are installed.
7Click Print (or OK).
5Printing from Your Computer
Printing with Macintosh
1
Turn on the machine and load the paper in the machine.
2Make sure that the proper paper source is selected.
3Create a document or open a file to print using an appropriate application software.
4Select Page Setup on the application
software’s File menu.
5Confirm that MP510 is selected in Format
for.
6Select the desired paper size in Paper Size.
7Click OK.
8Select Print on the application software’s
File menu.
9Select Quality & Media in the pop-up
menu.
10 Specify the required settings.
Make sure that Paper Feed Switch is selected
in Paper Source.
Note
z If you select Front for Plain Paper, the machine
will automatically switch to the Front Feeder when
Plain Paper is specified for Media Type. You
cannot load paper other than A4, Letter, or B5-sized
plain paper in the Front Feeder.
z For details on other printer driver functions, click
to view the Printer Driver Guide on-screen
manual
. If the on-screen manuals are not installed,
the Printer Driver Guide on-screen manual is not
displayed even if is clicked.
11 Click Print.
6Printing from Your Computer
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.