Canon MG5520 User Manual

Installing Your Multifunction to

Additional Computers on Your Network

PIXMA MG5520

Mac OS

1

Installing Your Multifunction to Additional

Computers on Your Network

PIXMA MG5520

Mac OS

Preparing to Connect My Multifunction to My Network 3

Network Requirements 3
Notes on Wireless Connection 4

Installing the Drivers & Software 5

2

Preparing to Connect the Multifunction

To the Network

Network Requirements

Before connecting the machine to the network, make sure that configuration of the computer and access point or router is

complete, and that the computer is connected to the network.

Wireless Connection

Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that

configuration of the computer and access point or router is complete.

3

Preparing to Connect the Multifunction

To the Network

An "Ad-hoc connection," which establishes a direct
connection to the computer over a wireless connection

without using an access point, is not supported.

Notes on Network Connection

• The configuration, router functions, setup procedures and security settings of
the network device vary depending on your system environment. For details,

refer to your device's instruction manual or contact its manufacturer.

• In an office setup, consult your network administrator

• If you connect to a network that is not protected with security measures, there

is a risk of disclosing data such as your personal information to a third party.

• Place the machine and computer on the same network segment.

4