Canon MG5220 User Manual

<< Previous Next >>

Installing Your Multifunction to

Additional Computers on Your Network

PIXMA MG5220

Mac OS

1

<< Previous Next >>

Preparing to Connect My Multifunction To My Network

3

Installing The MG5220 Software

5

Installing Your Multifunction to

Additional Computers on Your Network

PIXMA MG5220

Mac OS

2

Preparing to Connect My Multifunction

<< Previous Next >>

To My Network

Network Requirements

Before connecting the machine to the network, make sure that configuration of the computer and access point or router is

complete, and that the computer is connected to the network.

3

Preparing to Connect My Multifunction

To My Network

An "Ad-hoc connection," which establishes a direct
connection to the computer over a wireless connection
without using an access point, is not supported.

Be sure to prepare an access point.

Notes on Network Connection

• The configuration, router functions, setup procedures and security settings of

the network device vary depending on your system environment. For
details, refer to your device's instruction manual or contact its manufacturer.

<< Previous Next >>

• In an office setup, consult your network administrator

• If you connect to a network that is not protected with security

measures, there is a risk of disclosing data such as your personal information
to a third party.

• If an error message appears or if you have trouble with the network
connection, refer to the printed manual: Network Setup Troubleshooting.

• Place the machine and computer on the same network segment.

4