Canon IXUS 105 IS, PowerShot SD1300 IS User Guide

Camera User Guide
COPY
ENGLISH
Make sure you read this guide before using the camera.
Store this guide safely so that you can use it in the future.
Checking the Package Contents
Camera
Battery Pack NB-6L
(with Terminal Cover)
Interface Cable
IFC-400PCU
AV Cable
AVC-DC400
Wrist Strap WS-DC7
Warranty
Card
Getting Started
DIGITAL CAMERA
Solution Disk
“Canon Customer
Support” Leaflet
Battery Charger
CB-2LY/CB-2LYE
COPY
Using the PDF Manuals
Also refer to the PDF manuals on the CD-ROM. After installation, shortcut icons appear on the desktop. If the software installation fails, you can find the manuals in the Readme folder on the CD-ROM.
Camera User Guide (This Guide)
Once you have mastered the basics, use the camera’s many features to shoot more challenging photos.
Personal Printing Guide
Read when you want to connect the camera to a printer (sold separately) and print.
Software Guide
Read when you want to use the included software.
A memory card is not included.
Adobe Reader is required to view the PDF manuals.
2
Read This First
COPY
Test Shots and Disclaimer
Take some initial test shots and play them back to make sure the images were recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that results in the failure of an image to be recorded or to be recorded in a way that is machine readable.
Warning Against Copyright Infringement
The images recorded with this camera are intended for personal use. Do not record images that infringe upon copyright laws without the prior permission of the copyright holder. Please be advised that in certain cases the copying of images from performances, exhibitions, or commercial properties by means of a camera or other device may contravene copyright or other legal rights even if the image was shot for personal use.
Warranty Limitations
This camera’s warranty is only effective in the country of sale. If there is a problem with the camera while abroad, please return it to the country of sale before proceeding with a warranty claim to a Canon Customer Support Help Desk. For Canon Customer Support contacts, please see the customer support list supplied with your camera.
LCD Monitor
The LCD monitor is produced with extremely high-precision
manufacturing techniques. More than 99.99% of the pixels operate to specification, but occasionally non-performing pixels may appear as bright or dark dots. This is not a malfunction and has no effect on the recorded image.
The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If so, remove the film before using the camera.
Camera Body Temperature
Please take care when operating the camera for an extended period as the camera body may become warm. This is not a malfunction.
3
What Do You Want to Do?
4
Shoot
FwPVI
Portraits
(p. 54)
At night
(p. 54)
Kids and pets
(p. 55)
At the beach
(p. 55)
Against snow
(p. 56)
S’t
Indoors
(p. 55)
Fireworks
(p. 56)
Underwater
(p. 56)
Low light
(p. 55)
COPY
Shoot, leaving it to the camera to make settings. . . . . . . . . . . . . . . 24
Shoot to match special conditions. . . . . . . . . . . . . . . . . . . . . . 54 – 56
Take good people shots
Shoot various other scenes
Focus on faces Shoot in places where I cannot use the flash
(turn off the flash) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Take pictures with me in them too (self-timer) . . . . . . . . 61, 62, 74, 75
Insert the date and time into my shots . . . . . . . . . . . . . . . . . . . . . . 60
Take close-up pictures of subjects (macro shooting) . . . . . . . . . . . 67
Take sepia toned or black and white pictures . . . . . . . . . . . . . . . . . 72
Change the size of picture I want to take (recording pixels) . . . . . . 68
Take pictures continuously . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Change the ISO speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Make dark subjects appear brighter (i-Contrast) . . . . . . . . . . . . . . . 83
4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 62, 78
What Do You Want to Do?
1
View
E
Shoot/View Movies
2
Print
Save
3
Other
COPY
Look at my pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Automatically play back pictures (slideshow). . . . . . . . . . . . . . . . . 96
Look at my pictures on a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Look at my pictures on a computer . . . . . . . . . . . . . . . . . . . . . . . . 33
Quickly search pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94, 95
Erase pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 101
Protect pictures from accidental erasure . . . . . . . . . . . . . . . . . . . 100
Shoot movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
View movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Easily print pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Save images to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Turn off sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Use the camera abroad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Understand what is displayed on the screen. . . . . . . . . . . . . . . . 128
5
Table of Contents
COPY
Chapters 1 – 3 explain the basic operations and frequently used functions of this camera. Chapters 4 onward explain the advanced functions, letting you learn more as you read each chapter.
Checking the Package Contents .......2
Read This First ..................................3
What Do You Want to Do? ................4
Conventions Used in this Guide ........8
Safety Precautions.............................9
1 Getting Started...............13
Charging the Battery ........................14
Compatible Memory Cards
(Sold Separately).........................16
Inserting the Battery and Memory
Card.............................................16
Setting the Date and Time ...............19
Setting the Display Language..........21
Formatting Memory Cards ...............22
Pressing the Shutter Button .............23
Taking Pictures (Smart Auto)...........24
Viewing Images ...............................28
Erasing Images ................................29
Shooting Movies ..............................30
Viewing Movies ................................32
Transferring Images to a Computer for
Viewing........................................33
Accessories .....................................37
Separately Sold Accessories ...........38
2 Learning More................ 41
Components Guide ..........................42
Indicator ...........................................43
Screen Display.................................44
FUNC. Menu – Basic Operations ....46
MENU – Basic Operations ...............47
Changing the Sound Settings..........48
Changing the Screen Brightness.....49
6
Returning the Camera to
Default Settings .......................... 50
Low Level
Memory Card Formatting ............ 51
Power Saving Function
(Auto Power Down)..................... 52
3 Shooting in Special
Conditions and Commonly
Used Functions..............53
Shooting in Various Conditions....... 54
Turning the Flash Off ...................... 57
Zooming in Closely on Subjects
(Digital Zoom) ............................. 58
Inserting the Date and Time ............ 60
Using the Self-Timer ....................... 61
Using the Face Self-Timer .............. 62
4 Choosing Settings
Yourself ..........................63
Shooting in Program AE..................64
Adjusting the Brightness
(Exposure Compensation) .......... 65
Turning the Flash On ...................... 66
Shooting Far Away Subjects
(Infinity) ....................................... 66
Shooting Close-ups (Macro) ...........67
Changing the Recording Pixel Setting
(Image Size) ............................... 68
Changing the Compression Ratio
(Image Quality) ........................... 68
Changing the ISO Speed ................ 70
Adjusting the White Balance ........... 71
Changing the Tone of an Image
(My Colors) ................................. 72
Continuous Shooting....................... 73
COPY
Shooting Using the
Two Second Self-Timer .............. 74
Customizing the Self-Timer............. 75
Shooting Using a TV Monitor.......... 76
Changing the Composition
with the Focus Lock .................... 76
5 Getting More Out of Your
Camera ...........................77
Changing the AF Frame Mode........ 78
Magnifying the Focal Point.............. 80
Shooting with the AF Lock .............. 81
Changing the Metering Mode.......... 81
Shooting with the AE Lock .............. 82
Shooting with the FE Lock .............. 82
Correcting the Brightness
and Shooting (i-Contrast) ........... 83
Red-Eye Correction ........................ 84
Shooting with Slow Synchro ........... 85
Shooting Long Exposures............... 86
6 Using Various
Functions for Shooting
Movies ............................87
Changing the Image Quality ........... 88
AE Lock/Exposure Shift .................. 89
Other Shooting Functions ............... 90
Playback Functions ......................... 91
7 Using Various Playback and
Editing Functions ..........93
Quickly Searching Images .............. 94
Searching for Images Using
the Jump Display ........................ 95
Viewing Slideshows ........................ 96
Checking the Focus ........................ 97
Magnifying Images.......................... 98
Changing Image Transitions........... 98
Viewing Images on a TV ................. 99
Table of Contents
Protecting Images ......................... 100
Erasing All Images ........................101
Rotating Images ............................102
Resizing Images............................ 103
Correcting the Brightness
(i-Contrast) ................................ 104
Correcting the Red-Eye Effect.......105
8 Printing......................... 107
Printing Images .............................108
Choosing Images for Printing
(DPOF)...................................... 110
9Customizing Camera
Settings ........................113
Changing Camera Settings ...........114
Changing Shooting Function
Settings ..................................... 117
Changing Playback Function
Settings ..................................... 120
10 Useful Information ....... 121
Using Household Power ................ 122
Troubleshooting............................. 123
List of Messages That
Appear on the Screen ............... 126
Information Displayed
on the Screen............................ 128
Functions Available
in Each Shooting Mode ............. 130
Menus............................................ 132
Handling Precautions .................... 135
Specifications ................................ 136
7
Conventions Used in this Guide
(Right button)
(FUNC./SET button)
(Up button)
(Left button)
(Down button)
COPY
Icons are used in the text to represent the camera buttons and switches.
Language that displays on the screen appears inside [ ] (square
brackets).
The directional buttons and FUNC./SET button are represented by the
following icons.
: Things you should be careful about.
: Troubleshooting tips.
: Hints for getting more out of your camera.
: Supplemental information.
(p. xx): Reference pages.“xx” stands for a page number.
This guide assumes all functions are at their default settings.
The various types of memory cards that can be used in this camera are
collectively referred to as memory cards in this guide.
8
Safety Precautions
COPY
Before using the camera, please ensure that you read the safety precautions
described below. Always ensure that the camera is operated correctly.
The safety precautions noted on the following pages are intended to prevent injuries
to yourself and other persons, or damage to the equipment.
Be sure to also check the guides included with any separately sold accessories you
use.
Warning Denotes the possibility of serious injury or death.
Caution Denotes the possibility of injury.
Caution Denotes the possibility of damage to the equipment.
Warning
Camera
Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash.
Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation. Memory card: Dangerous if swallowed. If this occurs, contact a doctor immediately.
Do not attempt to disassemble or alter any part of the equipment unless
expressly indicated to do so in this guide.
To avoid the risk of injury, do not touch the interior of the camera if it has been
dropped or otherwise damaged.
Stop operating the camera immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
Do not use organic solvents such as alcohol, benzine, or thinner to clean the
equipment.
Do not allow liquids or foreign objects to enter the camera.
This could result in fire or electrical shock. If liquid or foreign objects come into contact with the camera interior, immediately turn the camera power off and remove the battery.
Use only recommended power sources.
Using other power sources could result in fire or electrical shock.
9
Safety Precautions
COPY
Battery and Battery Charger
Use only recommended batteries.
Do not place the battery near or in direct flame.
Do not let the battery come into contact with water (e.g. sea water) or other
liquids.
Do not attempt to disassemble, alter or apply heat to the battery.
Avoid dropping or subjecting the battery to severe impacts.
This may cause explosions or leaks, resulting in fire, injury and damage to the surroundings. In the event that a battery leaks and the eyes, mouth, skin or clothing contacts these substances, immediately flush with water and seek medical assistance. If the battery charger becomes wet, unplug it from the outlet and consult your camera distributor or the closest Canon Customer Support Help Desk.
Use only the specified battery charger to charge the battery.
Unplug the power cord periodically and wipe away any dust and dirt that has
collected on the plug, the exterior of the power outlet, and the surrounding area.
Do not handle the power cord with wet hands.
Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into the outlet.
Do not allow dirt or metal objects (such as pins or keys) to contact the charger
terminals or plug.
This could result in fire or electrical shock.
Other Warnings
Do not play the supplied CD-ROM(s) in any CD player that does not support
data CD-ROMs.
Playing the CD-ROM(s) in an audio CD player (music player) could damage the speakers. It is also possible to suffer hearing loss from listening with headphones to the loud sounds of a CD-ROM played on a music CD player.
Caution
Be careful not to bang the camera or subject it to strong impacts or shocks
when hanging it by the strap.
Be careful not to bump or push strongly on the lens.
This could damage the camera or lead to injury.
Avoid using, placing or storing the camera in the following places.
- Places subject to strong sunlight.
- Places subject to temperatures above 40 °C (104 °F).
- Humid or dusty areas. These could cause leakage, overheating or an explosion of the battery, resulting in electrical shock, fire, burns or other injuries. High temperatures may also cause deformation of the casing.
10
Safety Precautions
COPY
When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
Caution
Do not aim the camera at bright light sources (the sun, etc.).
Doing so may cause malfunctions or damage the image sensor.
When using the camera on a beach or at a windy location, be careful not to
allow dust or sand to enter the camera.
This may cause the camera to malfunction.
In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from the flash to prevent heat build-up and damage to the unit.
Unplug the battery charger from the power outlet after recharging is complete,
or when you are not using it.
Do not place anything, such as cloth on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort, resulting in fire.
Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
Before you discard battery, cover the terminals with tape or other insulators.
Contacting other metal materials in waste containers may lead to fire or explosions.
Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or injuries.
Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the LCD monitor.
When putting the camera in your bag, ensure that hard objects do not come into
contact with the LCD monitor.
Do not attach accessories to the strap.
Doing so may cause malfunctions or damage the LCD monitor.
11
12
COPY
1
Strap
COPY
Getting Started
This chapter explains preparations before shooting, how to shoot in A mode, and then how to view and erase the images you take.
The latter part of this chapter explains how to shoot and view movies
and transfer images to a computer.
Attaching the Strap/Holding the Camera
Be sure to attach the supplied strap to the camera and wrap it around your
wrist when shooting to avoid dropping the camera.
Keep your arms tight against your body while holding the camera firmly by
the sides. Be sure that your fingers do not block the flash.
13
Charging the Battery
CB-2LY
CB-2LYE
COPY
Use the included charger to charge the battery. Be sure to charge the battery as it is not charged at the time of purchase.
Remove the cover.
Insert the battery.
Align the S marks on the battery and
charger, then insert the battery by sliding it in and down .
Charge the battery.
For CB-2LY: Flip out the plug and plug
the charger into a power outlet .
For CB-2LYE: Plug the power cord into
the charger, then plug the other end into a power outlet.
X The charge lamp lights red and charging
starts.
The charge lamp will light green when
charging has finished. Charging takes approx. 1 hour and 55 minutes.
Remove the battery.
Unplug the battery charger from the power
outlet, then remove the battery by sliding it in and up .
To protect the battery and prolong its life, do not charge it for longer than 24 hours continuously.
14
Charging the Battery
Attach the cover to a charged battery so that the S mark is visible.
COPY
Approximate Number of Shots That Can Be Taken
Number of Shots
Playback Time (Hours)
The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
Under some shooting conditions, the number of shots that can be taken may be less
than mentioned above.
240
7
Battery Charge Indicator
An icon or message will appear on the screen indicating the battery’s charge state.
Display Summary
Sufficient charge.
Slightly depleted, but sufficient.
(Blinking red) Nearly depleted. Charge the battery.
“Change the battery pack.” Depleted. Recharge the battery.
Using the battery and charger effectively
Charge the battery on the day, or the day before, it will be used.
Charged batteries continue to discharge naturally even if they are not used.
How to store the battery for long periods:
Deplete and remove the battery from the camera. Attach the terminal cover and store the battery. Storing a battery for long periods of time (about a year) without depleting it may shorten its life span or affect its performance.
The battery charger can also be used when abroad.
The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power. If the plug does not fit the outlet, use a commercially available plug adapter. Do not use electrical transformers for foreign travel as they will cause damage.
The battery may develop a bulge.
This is a normal characteristic of the battery and does not indicate a problem. However, if the battery bulges to the point where it will no longer fit into the camera, please contact a Canon Customer Support Help Desk.
If the battery is quickly depleted even after charging, it has reached the
end of its life span.
Purchase a new battery.
15
Compatible Memory Cards
COPY
(Sold Separately)
SD memory cards (2GB and less)*
SDHC memory cards (More than 2 GB, up to and including 32 GB)*
SDXC memory cards (More than 32 GB)*
MultiMediaCards
MMCplus memory cards
HC MMCplus memory cards
* This memory card complies with the SD standards. Some cards may not
operate properly depending on the brand of card used.
Depending on your computer's OS version, SDXC memory cards may not be recognized when using a commercially available card reader. Check to make sure that your OS supports this function beforehand.
Inserting the Battery and Memory Card
Insert the included battery and a memory card (sold separately).
Check the card’s write-protect tab.
If the memory card has a write-protect tab,
you will not be able to record images if the tab is in the locked position. Slide the tab up until you hear a click.
Open the cover.
Slide the cover and open it .
16
Inserting the Battery and Memory Card
Terminals
Terminals
COPY
Insert the battery.
Insert the battery as shown until it locks
into place with a click.
Be sure to insert the battery in the correct
direction or it will not properly lock into place.
Insert the memory card.
Insert the memory card as shown until it
locks into place with a click.
Be sure the memory card is oriented
correctly. Inserting the memory card in the wrong direction could damage the camera.
Close the cover.
What if [Memory card locked] appears on the screen?
SD, SDHC and SDXC memory cards have a write-protect tab. If this tab is in the locked position, [Memory card locked] will appear on the screen and you will not be able to take or erase images.
Close the cover , and press downward
as you slide it until it clicks into place .
17
Inserting the Battery and Memory Card
Number of shots that can be taken
COPY
Removing the Battery and Memory Card
Remove the battery.
Open the cover and press the battery lock
in the direction of the arrow.
X The battery will pop up.
Remove the memory card.
Push the memory card in until you hear a
click, then slowly release it.
X The memory card will pop up.
Approximate Number of Shots per Memory Card
Memory Card
Number of shots
Values are based on the default settings.
The number of shots that can be taken will vary depending on camera settings, the
subject and the memory card used.
Can you check the number of shots that can be taken?
You can check the number of shots that can be taken when the camera is in a Shooting mode (p. 24).
18
4GB 16GB
1231 5042
Setting the Date and Time
COPY
The Date/Time settings screen will appear the first time the camera is turned on. Since the dates and times recorded into your images are based on these settings, be sure to set them.
Turn on the camera.
Press the power button.
X The Date/Time screen will appear.
Set the date and time.
Press the qr buttons to choose an
option.
Press the op buttons to set a value.
Reappearing Date/Time screen
Set the correct date and time. If you have not set the date and time, the Date/ Time screen will appear each time you turn on the camera.
Complete the setting.
Press the m button.
X Once the date and time have been set,
the Date/Time screen will close.
Pressing the power button will turn off the
camera.
19
Setting the Date and Time
COPY
Changing the Date and Time
You can change the current date and time settings.
Display the menus.
Press the n button.
Choose [Date/Time] in the 3 tab.
Press the qr buttons to choose the 3
tab.
Press the op buttons to choose [Date/
Time], then press the m button.
Change the date and time.
Follow Steps 2 and 3 on p. 19 to adjust
Date/Time battery
The camera has a built-in date/time battery (backup battery) that allows the
date/time settings to be retained for about three weeks after the battery pack has been removed.
By inserting a charged battery or connecting an AC adapter kit (sold
separately, p. 38) the date/time battery can be charged in about 4 hours even if the camera is not turned on.
If the date/time battery is depleted, the Date/Time menu will appear when you
turn the camera on. Follow the steps on p. 19 to set the date and time.
the setting.
Pressing the n button will close the
menu.
20
Setting the Display Language
COPY
You can change the language that displays on the screen.
Enter Playback mode.
Press the 1 button.
Display the settings screen.
Press and hold the m button, then press
the n button.
Set the display language.
Press the opqr buttons to choose a
language, then press the m button.
X Once the display language has been set,
the settings screen will close.
You can also change the display language by pressing the n button, choosing the 3 tab, and choosing the [Language] menu item.
21
Formatting Memory Cards
COPY
Before you use a new memory card or one that has been formatted in other devices, you should format the card with this camera. Formatting (initializing) a memory card erases all data on the memory card. As you cannot retrieve the erased data, exercise adequate caution before formatting the memory card.
Display the menu.
Press the n button.
Choose [Format].
Press the qr buttons to choose the 3
tab.
Press the op buttons to choose
[Format], then press the m button.
Format the memory card.
Press the qr buttons to choose [OK],
then press the m button.
X A confirmation screen will appear.
Press the op buttons to choose [OK],
then press the m button.
X The memory card will be formatted. X When formatting ends, [Memory card
formatting complete] will appear on the screen.
22
Pressing the Shutter Button
COPY
Press the m button.
Formatting or erasing data on a memory card merely changes the file management information on the card and does not ensure its contents are completely erased. Be careful when transferring or disposing of a memory card. When disposing of a memory card, take precautions such as physically destroying the card to prevent personal information leaks.
The total capacity of the memory card displayed in the formatting screen may be less than indicated on the memory card.
Pressing the Shutter Button
To take images that are in focus, be sure to first press the shutter button lightly (halfway) to focus, then press fully to shoot.
Press halfway (lightly to focus).
Press lightly until the camera beeps twice
and AF frames appear where the camera focused.
Press fully (all the way to shoot).
X The camera plays the shutter sound and
takes the shot.
If you shoot without pressing the shutter button halfway, the image may not be in focus.
23
Taking Pictures (Smart Auto)
Zoom bar
COPY
Since the camera can determine the subject and shooting conditions, you can let it automatically select the best settings for the scene and just shoot. The camera can also detect and focus on faces, setting the color and brightness to optimal levels.
Turn on the camera.
Press the power button.
X The start-up screen will appear.
Choose A mode.
Set the mode switch to A.
When you point the camera toward the
subject, the camera will make a slight noise as it determines the scene.
X The icon for the determined scene will
appear in the upper right of the screen.
X The camera will focus on detected faces
and display frames on them.
Compose the shot.
Moving the zoom lever toward i will
zoom in on your subject, making it appear larger. Moving the lever toward j will zoom out from your subject, making it appear smaller (the zoom bar will appear).
24
Taking Pictures (Smart Auto)
AF Frame
COPY
Focus.
Press the shutter button halfway to focus.
X When the camera focuses, it will beep
twice and AF frames will appear where the camera focused. Several AF frames will appear when the camera focuses on more than one point.
Shoot.
Press the shutter button fully.
X The camera will play the shutter sound
and shoot. The flash will automatically fire in low light conditions.
X The image will appear on the screen for
about two seconds.
You can take a second picture even while
an image is displayed by pressing the shutter button again.
25
Taking Pictures (Smart Auto)
COPY
Scene Icons
The camera displays an icon for the scene it has determined and then automatically focuses and selects the optimum settings for subject brightness and color.
Background Bright
Subject Backlit Backlit
People —*
Non-Human Subjects/ Landscapes
Close Subjects ——
Icon Background Color Gray Light Blue Orange Dark Blue
* Appears when the scene is dark and the camera is attached to a tripod.
Under certain conditions, the icon that appears may not match the actual scene. Especially when there is an orange or blue colored background (a wall for example), or the “Including Blue Skies” icons may appear and it may not be possible to shoot with the appropriate color. If this happens, try shooting in G mode (p. 64).
Including Blue
Skies
Sunsets
Dark
When Using
Tripod
*
26
Taking Pictures (Smart Auto)
COPY
What if...
What if white and gray frames appear when you point the camera toward
a subject?
When faces are detected, a white frame appears on the face of the main subject, while gray frames appear on other detected faces. The frames will follow the subjects within a certain range (p. 78).
What if the indicator blinks orange and blinks on the screen?
Attach the camera to a tripod so that the camera does not move and blur the image.
What if the camera does not play any sounds?
Pressing the l button while turning on the camera power will turn off all sounds except for warning sounds. To turn the sounds on, press the n button, choose the 3 tab, and then choose [Mute]. Press the qr buttons to choose [Off].
What if the image comes out dark even if the flash fired when shooting?
The subject is too far away for the flash to reach. Move the zoom lever toward j and hold it until the lens stops moving. The camera will be at its maximum wide angle setting and you can shoot within the effective flash range of approximately 30 cm – 4.0 m (12 in. – 13 ft.). Move the zoom lever toward i and hold it until the lens stops moving. The camera will be at its maximum telephoto setting and you can shoot within the effective flash range of approximately 50 cm – 2.0 m (1.6 – 6.6 ft.).
What if the camera beeps once when the shutter button is pressed
halfway?
Your subject may be too close. Move the zoom lever toward j and hold it until the lens stops moving. The camera will be at its maximum wide angle setting and you will be able to focus on subjects that are approximately 3 cm (1.2 in.) or more away from the end of the lens. Move the zoom lever toward i and hold it until the lens stops moving. The camera will be at its maximum telephoto setting and you will be able to focus on subjects that are about 50 cm (1.6 ft.) or more away from the end of the lens.
What if the lamp lights when the shutter button is pressed halfway?
To reduce red-eye and to assist in focusing, the lamp may light when shooting in dark areas.
What if the h icon blinks when you try to shoot?
The flash is charging. You can shoot when recharging ends.
27
Viewing Images
COPY
You can view the images you have taken on the screen.
Enter Playback mode.
Press the 1 button.
X The last image you took will appear.
Choose an image.
Pressing the q button will cycle through
the images in the reverse order they were taken, from the newest image to the oldest.
Pressing the r button will cycle through
the images in the order they were taken, from oldest to newest.
The images change more quickly if you
keep the qr buttons pressed, but they will appear coarse.
The lens will retract after approximately 1
minute elapses.
Pressing the 1 button again while the
Switching to Shooting mode
Pressing the shutter button halfway while in Playback mode switches the camera to Shooting mode.
lens is retracted will turn off the power.
28
Erasing Images
COPY
You can choose and erase images one at a time. Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image.
Enter Playback mode.
Press the 1 button.
X The last image you took will appear.
Choose an image to erase.
Press the qr buttons to display an image
to erase.
Erase the image.
Press the p button.
X [Erase?] appears.
Press the qr buttons to choose [Erase],
then press the m button.
X The displayed image will be erased.
To exit instead of erasing, press the qr
buttons to choose [Cancel], then press the m button.
29
Shooting Movies
Shooting Time
COPY
The camera can automatically select all settings so that you can shoot movies just by pressing the shutter button.
Enter E mode.
Set the mode switch to E.
Compose the shot.
Moving the zoom lever toward i will
zoom in on your subject, making it appear larger. Moving the lever toward j will zoom out from your subject, making it appear smaller.
Focus.
Press the shutter button halfway to focus.
X When the camera focuses, it will beep
twice and the indicator will light green.
30
Shoot.
Press the shutter button fully.
Loading...
+ 118 hidden pages