Canon HF-R80 Quick Guide

PUB. DT0-B030-A

This guide introduces only basic functions. To download
the Instruction Manual, which contains more advanced
information, refer to page 11.

Ce guide présente uniquement les fonctions de base.
Pour télécharger le mode d’emploi contenant des
informations plus approfondies, consultez la page 13.

Esta guía solo muestra las funciones básicas. Para
descargar el Manual de instrucciones, que contiene
información más avanzada, consulte la página 9.

HD Camcorder

Quick Guide

Caméscope HD

Guide rapide

Videocámara HD

Guía breve

English

Français

Español

Important Usage Instructions

WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

To reduce the risk of electric shock, do not place objects filled with
liquids, such as vases, on the apparatus.

COPYRIGHT WARNING:

Unauthorized recording of copyrighted materials may infringe on
the rights of copyright owners and be contrary to copyright laws.

FCC/IC NOTICE

HD Camcorder, ID0090/ID0093 systems

This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply
with the limits for class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and use in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:

2

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for
help.

Use of shielded cable is required to comply with class B limits in
Subpart B of Part 15 of FCC Rules.Do not make any changes or
modifications to the equipment unless otherwise specified in the
manual. If such changes or modifications should be made, you
could be required to stop operation of the equipment.

Model ID0090 (including WLAN Module Model ES200,
FCC ID: AZD230)

This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may
cause undesired operation of the device.

This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter.

The available scientific evidence does not show that any health
problems are associated with using low-power wireless devices.
There is no proof, however, that these low power wireless devices
are absolutely safe. Low-power wireless devices emit low levels
of radio frequency energy (RF) in the microwave range while being
used. Whereas high levels of RF can produce health effects (by
heating tissue), exposure to low-level RF that does not produce
heating effects causes no known adverse health effects. Many
studies of low-level RF exposures have not found any biological
effects. Some studies have suggested that some biological
effects might occur, but such findings have not been confirmed
by additional research. This model has been tested and found to
comply with FCC/IC radiation exposure limits set forth for an

English

3

uncontrolled equipment and meets the FCC radio frequency (RF)
Exposure Guidelines and RSS-102 of the IC radio frequency (RF)
Exposure rules.

Canon U.S.A., Inc.
One Canon Park, Melville, NY 11747, USA
Tel No. 1-800-OK-CANON (1-800-652-2666)

The Mains plug is used as the disconnect device. The Mains plug
shall remain readily operable to disconnect the plug in case of an
accident.

While using the compact power adapter, do not wrap it or cover it
with a piece of cloth, and do not place it in confined narrow spaces.

CA-110 identification plate is located on the bottom.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure, that may be of sufficient magnitude to constitute
a risk of electric shock to persons.

The exclamation point, within an equilateral triangle, is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the product.

4

Important Safety InstructIons

In these safety instructions the word “apparatus” refers to the Canon
HD Camcorder VIXIA HF R82 / VIXIA HF R80 / VIXIA HF R800 and all its
accessories.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

8 Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the
apparatus.

9 Only use attachments/accessories specified by the manufacturer.

10 Unplug this apparatus during lightning storms or when unused for long

periods of time.

11 Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power­supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.

CAN ICES-3(B)/NMB-3(B)

REGIONS OF USE

The VIXIA HF R82 and VIXIA HF R80 are in compliance (as of
January 2017) with the radio signal regulations of the regions listed
below. For details on other regions where it can be used, make
inquiries with the contacts listed on the supplied warranty card or
leaflet.

English

REGIONS

Canada, Hong Kong S.A.R., USA

5

Model

ID0090: VIXIA HF R80 / VIXIA HF R82

Precautions About the Battery Pack
DANGER!
Treat the battery pack with care.

• Keep it away from fire (or it might explode).

• Do not expose the battery pack to temperature higher than
60 ºC (140 ºF). Do not leave it near a heater or inside a car in hot
weather.

• Do not try to disassemble or modify it.

• Do not drop it or subject it to shocks.

• Do not get it wet.

Important Note About Accessing the Memory

• Observe the following precautions while the ACCESS indicator is
on or flashing. Failing to do so may result in permanent data loss
or damage to the memory.

– Do not open the memory card slot cover.
– Do not disconnect the power source or turn off the camcorder.
– Do not change the camcorder’s shooting mode.
– Do not press the ^ button.
– When a USB cable is connected to the camcorder, do not dis-

connect the USB cable.

6

To display the camcorder’s certification logos

Touch [0] > [Other Settings] > q > [Certification Logo
Display].

USA and Canada only:

The Lithium ion/polymer battery that powers the
product is recyclable. Please call 1-800-8-BATTERY
for information on how to recycle this battery.

` This product is not guaranteed to fully support functions
of FlashAir cards (including wireless transfer). In case of any
card related issues, please check with the card manufacturer.
Also note that approval is required to use FlashAir cards in many
countries or regions. Without approval, the use of FlashAir cards
is not permitted. If it is unclear whether your card is approved
for use in your area, please check with the card manufacturer.
Availability of FlashAir cards also varies by region.

Safety Instructions

Be sure to read these instructions in order to operate the product
safely. Follow these instructions to prevent injury or harm to the
operator of the product or others.

WARNING

Denotes the risk of serious injury or death.

• Stop using the product in any case of unusual circumstances such
as the presence of smoke or a strange smell.

• Do not touch any exposed internal parts.

• Do not get the product wet. Do not insert foreign objects or liquids
into the product.

• Do not touch the product connected to a power outlet during
lightning storms. This may cause electric shock.

• Do not disassemble or modify the product.

• Do not expose the product to strong shocks or vibration.

English

7

• Do not place heavy objects on the power cord. Do not damage,
break or modify the power cord.

• Observe the following instructions when using commercially
available batteries or provided battery packs.

– Use batteries/battery packs only with their specified product.
– Do not heat batteries or expose them to fire.
– Do not charge batteries/battery packs using non-authorized

battery chargers.

– Do not expose the terminals to dirt or let them come into con-

tact with metallic pins or other metal objects.

– Do not use leaking batteries/battery packs. If a battery/battery

pack leaks and the material contacts your skin or clothing, flush
the exposed area thoroughly with running water. In case of eye
contact, flush thoroughly with copious amounts of clean running
water and seek immediate medical assistance.

– When disposing of batteries/battery packs, insulate the termi-

nals with tape or other means. This may cause electric shock,
explosion or fire.

• Keep the product out of the reach of young children.

• Use only power sources specified in this instruction manual for use
with the product.

• Observe the following instructions when using a battery charger or
AC adapter.

– Do not plug in or unplug the product with wet hands.
– Do not use the product if the power plug is not fully inserted into

the power outlet.

– Do not expose the power plug and terminals to dirt or let them

come into contact with metallic pins or other metal objects.

– Do not place heavy objects on the power cord. Do not damage,

break or modify the power cord.

– Do not wrap the product in cloth or other materials when in use

or shortly after use when the product is still warm in tempera-

ture.
– Do not unplug the product by pulling the power cord.
– Do not leave the product connected to a power source for long

periods of time.

8