Canon DT 9500 CI User Manual

Digital Satellite Receiver CryptoWorks Embedded

User's Manual

The product image may differ from the actual product.

Notice

Thank you for purchasing a HUMAX product. Please read this user manual carefully, to be able to safely install, use and maintain the product at maximum performance. Keep this user manual next to your product for future reference.

Throughout the whole manual, Note indicates additional product operation information to make the user aware of possible problems and information of any importance to help the user understand, use and maintain the installation.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby Laboratories.

All other trademarks are the properties of their respective owners.

Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except approval of ownership of copyright and copyright law.

The information in this document is subject to change without notice.

GB 1

Safety Warning

The product has been manufactured to satisfy international safety standards. Please read the following safety precautions and warnings carefully.

• Disconnect the product from the mains before you start any maintenance or installation procedures.

• Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock.

• The product should not be exposed to liquid of any kind. In addition, no objects filled with liquid, such as vases, should be placed on the apparatus.

• Do not stand the product on soft furnishings or carpets. Do not stack electronic equipments on top of the product.

• Do not use any unsupported attachments as these may be hazardous or cause damage to the product.

• Disconnect the product from the mains before connecting or disconnecting the cable from the antenna or TV.

• The LNB cable must be earthed to the system earth for the satellite dish.

• Place the product indoors to avoid exposing it to lightening, rain or sun. Do not place it near a radiator or heat register. Make sure it has more than 10 cm clearance from any appliances susceptible to electromagnetic influences, such as a TV or a VCR. Do not block these openings with any object, and do not place the product on a bed, sofa, rug or other similar surface. If you place the product on a rack or bookcase, ensure that there is adequate ventilation and that you have followed the manufacturer's instructions for mounting. Do not place the product on an unstable cart, stand, tripod, bracket or table where it can fall. A falling product can cause serious injury to a child or adult, and serious damage to the appliance.

• Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left unattended and unused for long periods of time.

• Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts.

• When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorised substitution may result in additional damage to the unit.

GB 2

Contents

1. Before Using the Product ................................................................................. GB5

2. Setup.................................................................................................... GB12

3. Basic Operation .......................................................................................... GB17

4. Menu Map ............................................................................................... GB21

5. Installation............................................................................................... GB23

6. System Settings.......................................................................................... GB33

1.1 Package Contents ............................................................................. GB5

1.2 Front Panel ................................................................................... GB6

1.3 Rear Panel.................................................................................... GB7

1.4 Conditional Access............................................................................. GB8

1.5 Remote Control................................................................................ GB10

2.1 Connecting Antenna/TV/VCR.................................................................... GB12

2.2 Connecting Audio System....................................................................... GB15

2.3 Powering On .................................................................................. GB16

3.1 Installation Wizard ............................................................................. GB17

3.2 Viewing Programme............................................................................ GB18

3.3 Subtitle ....................................................................................... GB19

3.4 Soundtrack ................................................................................... GB19

3.5 Teletext ...................................................................................... GB20

5.1 DIGITURK .................................................................................... GB23

5.2 Advanced Installation........................................................................... GB24

5.3 Organise Channels ............................................................................ GB29

5.4 Factory Settings ............................................................................... GB32

6.1 Language Setting .............................................................................. GB33

6.2 Time and Date Setting.......................................................................... GB33

6.3 A/V Output Setting ............................................................................. GB34

6.4 UHF Tuning................................................................................... GB34

6.5 Other Setting.................................................................................. GB35

6.6 System Information ............................................................................ GB36

GB 3

Contents

7. Parental Control.......................................................................................... GB37

8. Channel List ............................................................................................. GB38

9. Utility.................................................................................................... GB41

10. Programme Guide....................................................................................... GB42

11. Mail .................................................................................................... GB44

12. Conditional Access...................................................................................... GB45

13. Common Interface....................................................................................... GB46

14. Software Upgrade ....................................................................................... GB47

15. Troubleshooting ........................................................................................ GB49

16. Specification............................................................................................ GB51

7.1 Parental Rating................................................................................ GB37

7.2 Modify PIN code............................................................................... GB37

7.3 Front Panel Lock .............................................................................. GB37

8.1 Switching Channels ............................................................................ GB38

8.2 Setting Property of Channel ..................................................................... GB39

8.3 Favourite List.................................................................................. GB40

14.1 OTA (Over the Air)............................................................................ GB47

GB 4

1. Before Using the Product

1.BeforeUsing theProduct

This chapter provides detailed instructions on the product and its accessories.

1.1 Package Contents

When you unpack your package contents, make sure you have all the necessary items shown in the figure below. If any of the items are missing or damaged, please contact your local product distributor for replacement.

Remote Control**Batteries

User's Manual**Warranty Card**SCART Cable**RCA Cable

Note: The product image may differ from the actual product.

RF Cable

GB 5

1. Before Using the Product

1.2 Front Panel

1. STANDBY Button

Switches between operation and standby modes.

2. MODE Button

Switches between DIGITURK and OTHER modes.

3. CH-/CH+ Button

Moves the TV/radio channel up/down.

4. MAIL LED

Green light is emitted when the mail was received.

Note: Refer to 1.4 Conditional Access when you insert the Smartcard.

5. DIGITURK CH LED

Amber light is emitted when viewing DIGITURK channel.

6. STANDBY LED

Red light is emitted when the product is in standby mode.

7. SMARTCARD SLOT

Slot for a Smartcard.

8. CI MODULE SLOT

Slot for a CI module.

GB 6

1.3 Rear Panel

1. LNB IN

Connects to a satellite antenna cable.

2. LNB OUT

Connects to another digital Set-Top Box.

3. RS-232C

Connects to your PC to update software.

4. TV SCART

Connects a TV SCART cable.

5. VCR SCART

Connects a VCR SCART cable.

6. VIDEO

Connects to the TV or VCR and outputs video signals.

7. AUDIO L/R

Connects to the TV or VCR and outputs audio signals.

8. RF OUT

Connects the RF output jack of the product and the RF input jack on the TV with the RF cable. The default UHF channel is 36.

9. RF IN

Connects the general aerial antenna and the RF input jack of the product with the RF cable.

10.S/PDIF

Outputs digital audio signals (S/PDIF).

GB 7

1. Before Using the Product

1.4 Conditional Access

Although some TV and radio channels are free to air, most TV and radio/music channels are available on a subscription basis and can only be enjoyed via Conditional Access component.

1. Inserting Smartcard

A Smartcard looks similar to a credit card and entitles you to view and listen to all the channels you choose to subscribe to. The Smartcard slot on the product can be used for CryptoWorks Smartcard only.

1. Open the right-hand flap on the front panel of the product.

2. Hold the Smartcard horizontally with the electronic chip (small squared-shape, gold in colour) facing upwards.

3. Insert the Smartcard into the top slot.

GB 8

2. Inserting CI (Common Interface) Module

Your product is equipped with a slot for Common Interface (CI).

1. Open the right-hand flap on the front panel of the product.

2. Insert the Smartcard into the CI module, and the CI module into the slot.

GB 9

1. Before Using the Product

1.5 Remote Control

1. AV

Selects the input source between TV and the product.

2. MODE

Switches between DIGITURK and OTHER modes.

3. NUMERIC BUTTONS

Enter a TV/radio channel number.

4. GUIDE (EPG)

Displays the programme guide.

5. i (INFORMATION) - WHITE

Displays the information about the channel and programme.

6. ARROW BUTTONS

Changes channels or moves the cursor up, down, left or right in menu option.

7. TIME – RED

Displays the current time on the screen.

8. FAV (Favourite channel) – GREEN

Displays Favourite channel list.

GB 10

9. CH-/CH+

Changes the channel.

10.PP (Recall)

Returns to the previous channel in each mode.

11.FREEZE

Freezes the scene you are watching. Does not cease audio.

12.WIDE

Changes the display format.

13.STANDBY

Switches between operation and standby modes.

14.OPTS

Displays the main menu.

15.BACK

Returns to the menu option.

16.OK

Selects a menu or confirms the selection. Displays the channel list while watching a programme.

17.LANGUAGE (SOUNDTRACK) – BLUE

Displays the a soundtrack list where available.

18.TXT (SUBTITLE) – YELLOW

Displays the subtitle language list where available.

19.V-/V+

Adjusts the audio volume.

20.MUTE

Mutes or unmutes the audio temporarily.

21.ZOOM

Enlarges the picture.

22.TV/RADIO

Switches between TV and radio. Does not work in DIGITURK mode.

** COLOUR BUTTONS (R/G/B/Y/W)

Select color keys for interactive applications.

GB 11

2. Setup

2.Setup

This chapter describes how to set up the product. Select the most appropriate procedure depending on your requirements. Before you connect the product to any other equipment, you must disconnect all equipments from their power sources.

Note: If you encounter any problem when setting up the product, please contact your local product distributor.

2.1 Connecting Antenna/TV/VCR

1. Using SCART Cable

1. Connect the antenna to the LNB IN of the product.

2. The SCART cable is connected as in the figure above.

GB 12

2. Using RCA Cable

1. Connect the antenna to the LNB IN of the product.

2. The RCA cable is connected as in the figure above.

GB 13

2. Setup

3. Using RF Cable

1. Connect the antenna to the LNB IN of the product.

2. The RF cable is connected as in the figure above.

Note: The default UHF channel is 36.

GB 14

2.2 Connecting Audio System

1. Connect the optical S/PDIF terminal and Dolby Digital decoder to listen to higher quality sound.

2. Connect VIDEO on the product and VIDEO IN on the TV using the RCA cable.

3. Connect AUDIO L/R on the product and AUDIO IN L/R on the audio system using the RCA cable.

GB 15

+ 36 hidden pages