Canon DR-6010C User Manual

User Manual

Please read this manual before operating this scanner.
After you finish reading this manual, store it in a safe
place for future reference.

International ENERGY STAR Program

As an ENERGY STAR
machine meets the ENERGY STAR

®

Partner, CANON ELECTRONICS INC., has determined that this

®

Program guidelines for energy efficiency.

The International ENERGY STAR® Office Equipment Program is an international program that
promotes energy saving through the use of computers and other office equipment. The program
backs the development and dissemination of products with functions that effectively reduce
energy consumption. It is an open system in which business proprietors can participate
voluntarily. The targeted products are office equipment, such as computers, monitors, printers,
fax, machine, copiers, and scanners. The standards and logos are uniform among participating
nations.

This model doesn’t provide "setting options" for power management.

European Union (and EEA) only.

This symbol indicates that this product is not to be disposed of with your household waste, according
to the WEEE Directive (2002/96/EC) and your national law. This product should be handed over to a
designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar
product or to an authorized collection site for recycling waste electrical and electronic equipment
(EEE). Improper handling of this type of waste could have a possible negative impact on the
environment and human health due to potentially hazardous substances that are generally associated
with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to
the effective usage of natural resources. For more information about where you can drop off your
waste equipment for recycling, please contact your local city office, waste authority, approved WEEE
scheme or your household waste disposal service. For more information regarding return and
recycling of WEEE products, please visit www.canon-europe.com/environment.

(EEA: Norway, Iceland and Liechtenstein)

Model Names

The following names may be provided for the safety regulations in each sales region of the Document Scanner.
DR-6010C: Model M11072

Trademarks

• Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or
registered trademarks in other countries.

• imageFORMULA is a trademark of CANON ELECTRONICS INC.

• Microsoft, Windows, Windows Vista and SharePoint are either registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.

• ISIS is a trademark of EMC Corporation, in the United States.

• Intel and Pentium are registered trademarks of Intel Corporation.

•ENERGY STAR

• Adaptec is registered trademark of Adaptec Inc.

• Adobe, the Adobe logo, Acrobat, the Adobe PDF logo, and Adobe Reader are either registered trademarks or trademarks of
Adobe Systems Incorporated in the United States and/or other countries.

• Other product and company names herein may be the trademarks of their respective owners.

®

is a U.S. registered mark.

Copyright

Copyright 2009 by CANON ELECTRONICS INC. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or by any information storage or retrieval system without the
prior written permission of CANON ELECTRONICS INC.

Disclaimers

The information in this document is subject to change without notice.

CANON ELECTRONICS INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL,
EITHER EXPRESS OR IMPLIED, EXPECT AS PROVIDED HERE IN, INCLUDING WITHOUT LIMITATION,
THERE OF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE OF USE OR NON-INFRINGEMENT. CANON ELECTRONICS INC. SHALL NOT BE LIABLE FOR
ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES
RESULTING FROM THE USE OF THIS MATERIAL.

INTRODUCTION

INTRODUCTION

Thank you for purchasing the Canon DR-6010C Document Scanner. Please read this manual
thoroughly before using the scanner to familiarize yourself with its capabilities, and to make the most
of its many functions. After reading this manual, store it in a safe place for future reference.

Manuals for the Scanner

The User Manual is divided into two sections: Hardware and Software. The Hardware section
contains general information and instructions for using the scanner. The Software section explains
how to make settings for the software required to use the scanner.

Hardware

Chapter 1 Before Using the Scanner

Safety instructions, features, scanner parts

Chapter 2 Setup

Scanner operation environment and setup procedures

Chapter 3 Basic Operation

Supported document types, basic scanning procedure, steps for clearing a paper jam

Chapter 4 Maintenance

Procedures for regular maintenance, roller replacement

Chapter 5 Troubleshooting

Troubleshooting information, application uninstall procedure

Chapter 6 Appendix

Product specifications and dimensional drawings

Software

Chapter 7 ISIS/TWAIN Driver Settings

ISIS/TWAIN driver settings

Chapter 8 Job Registration Tool Settings

Job Registration Tool settings

Chapter 9 Practical Examples

Hints and additional information about ISIS/TWAIN driver settings

i

INTRODUCTION

Symbols Used in This Manual

The following symbols are used in this manual to explain procedures, restrictions, handling
precautions, and instructions that should be observed for safety.

WARNING

Indicates a warning concerning operations that may lead to death or injury to persons
if not performed correctly. To use the machine safely, always pay attention to these
warnings.

CAUTION

Indicates a caution concerning operations that may lead to injury to persons, or
damage to property if not performed correctly. To use the machine safely, always pay
attention to these cautions.

IMPORTANT

Indicates operational requirements and restrictions. Be sure to read these items carefully to
operate the machine correctly, and avoid damage to the machine.

Note

Indicates a clarification of an operation, or contains additional explanations for a procedure.
Reading these notes is highly recommended.

(See “Documents,” on p. 3-1)

Shows the page number and title of a section that contains related information. Click to go to
the indicated page.

ii

User Manual

Hardware

Contents

Chapter1 Before Using the Scanner ........................................................................1-1

1-1 Important Safety Instructions .................................................................. 1-1

Installation Location.....................................................................................1-1

Power ..........................................................................................................1-2

Moving the Scanner .................................................................................... 1-2

Handling ...................................................................................................... 1-3

Disposal.......................................................................................................1-4

1-2 Features of the DR-6010C Document Scanner....................................... 1-5

1-3 Names and Functions of Parts.................................................................1-7

Chapter2 Setup .......................................................................................................... 2-1

2-1 Setup Procedure........................................................................................ 2-1

2-2 Installation Requirements ........................................................................ 2-2

2-3 Installing the Software .............................................................................. 2-4

Setup Disc ................................................................................................... 2-4

Software Installation .................................................................................... 2-5

2-4 Connecting the Scanner to the Computer ............................................ 2-11

Using a USB Connection...........................................................................2-11

Using a SCSI Connection..........................................................................2-12

2-5 Turning the Power ON.............................................................................2-14

Scanner Recognition ................................................................................. 2-14

About Auto Power OFF Function...............................................................2-15

Chapter3 Basic Operation ......................................................................................... 3-1

3-1 Documents................................................................................................. 3-1

3-2 Document Tray and Eject Tray ................................................................. 3-3

Preparing the Document Feed Tray.............................................................3-3

Preparing the Document Eject Tray............................................................. 3-3

3-3 Placing Documents ...................................................................................3-5

Feeding in the Page Separation Mode ........................................................3-5

Feeding in the Bypass Mode....................................................................... 3-7

3-4 Job Function.............................................................................................. 3-9

What is the Job Function ?..........................................................................3-9

Job Registration Tool................................................................................. 3-10

Scanning With the Job Function................................................................3-11

About Launcher ......................................................................................... 3-12

3-5 CapturePerfect 3.1...................................................................................3-16

What is CapturePerfect 3.1 ....................................................................... 3-16

Using CapturePerfect 3.1 ..........................................................................3-18

Scan Panel ................................................................................................ 3-21

3-6 Using Patchcode Sheets......................................................................... 3-23

About Patchcode Sheets ........................................................................... 3-23

Patchcode Pattern Function ...................................................................... 3-24

How to Use Patchcode Sheets..................................................................3-24

3-7 Clearing a Paper Jam .............................................................................. 3-26

3-8 Other Functions....................................................................................... 3-29

Folio Scan.................................................................................................. 3-29

Double Feed Detection Function ............................................................... 3-30

Long Document Mode ............................................................................... 3-30

MultiStream Function ................................................................................ 3-33

Auto Power OFF Function .........................................................................3-34

Chapter4 Maintenance...............................................................................................4-1

4-1 Regular Maintenance ................................................................................4-1

Cleaning the Scanner .................................................................................. 4-1

Cleaning the Feed Path...............................................................................4-1

Cleaning the Sensor Glass and the Rollers ................................................ 4-2

ii

4-2 Removing and Attaching the Rollers....................................................... 4-5

Roller Replacement Cycle ........................................................................... 4-5

Resetting the Counter ................................................................................. 4-6

Removing/Attaching the Roller Unit ............................................................ 4-8

Removing and Attaching the Retard Roller ............................................... 4-10

Chapter5 Troubleshooting ........................................................................................ 5-1

5-1 Troubleshooting ........................................................................................ 5-1

5-2 Uninstalling Software................................................................................ 5-7

Uninstalling the ISIS/TWAIN Driver ............................................................. 5-8

Uninstalling the Job Registration Tool ......................................................... 5-9

Uninstalling CapturePerfect 3.1.................................................................5-11

Chapter6 Appendix ....................................................................................................6-1

6-1 Specifications ............................................................................................ 6-1

Specifications .............................................................................................. 6-1

Replacement Parts ......................................................................................6-2

Options ........................................................................................................ 6-2

External Dimensions ................................................................................... 6-3

Index ........................................................................................................... 6-4

Chapter7 ISIS/TWAIN Driver Settings ......................................................................7-1

7-1 Before Use ................................................................................................. 7-1

7-2 ISIS/TWAIN Driver Properties Dialog Box ............................................... 7-3

Basic Tab Sheet .......................................................................................... 7-4

[Brightness] Tab Sheet .............................................................................. 7-13

[Image processing] Tab Sheet................................................................... 7-17

[Others] Tab Sheet ....................................................................................7-19

Addon Dialog Box......................................................................................7-24

Chapter8 Job Registration Tool Settings ................................................................8-1

8-1 Starting the Job Registration Tool...........................................................8-1

8-2 Job Registration Tool Settings Dialog Box............................................. 8-2

Job Registration Tool Dialog Box.................................................................8-3

[New/Editing] Dialog Box ............................................................................. 8-4

Administration Dialog Box ........................................................................... 8-8

Chapter9 Practical Examples.................................................................................... 9-1

Scanning Both Sides of Pages....................................................................9-1

Scanning Non-Standard-Size Documents...................................................9-1

Adjusting the Scan Area..............................................................................9-2

Scanning Multiple Documents.....................................................................9-3

Image Adjustments for Scanning................................................................. 9-4

Prescan .......................................................................................................9-7

Preserving Your Settings .............................................................................9-7

iii

Chapter 1

1-1 Important Safety Instructions

To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions
described below.

Installation Location

The performance of this scanner is affected by the environment in which it is installed. Make sure
that the location where the scanner is installed meets the following environmental requirements.

• Provide adequate space around the scanner for operation, maintenance, and ventilation.

Before Using the Scanner

At least 3.9" (100 mm)
when eject tray is empty.

15.7" (400 mm)
when the document
feed tray and
document feed tray
extension are
closed.

• If scanned documents are ejected to the back tray of the scanner, provide adequate space behind
the scanner for documents ejected after being scanned. (See “Preparing the Document Eject

Tray,” on p. 3-3.)

• Avoid installing the machine in direct sunlight. If this is unavoidable, use curtains to shade the
scanner.

• Avoid locations where a considerable amount of dust accumulates.

• Avoid warm or humid locations, such as in the vicinity of a water faucet, water heater, or humidifier.

• Avoid locations where ammonia gas is emitted.

• Avoid locations near volatile or flammable materials, such as alcohol or paint thinner.

• Avoid locations that are subject to vibration.

25.6" (650 mm)
when the document
feed tray and
document feed tray
extension are
open.

1-1

Chapter 1 Before Using the Scanner

• Avoid exposing the scanner to rapid changes in temperature. If the room in which the scanner is
installed is cold but rapidly heated, water droplets (condensation) may form inside the scanner.
This may result in a noticeable degradation in scanning quality.

The following conditions are recommended for optimal scanning quality:
Room temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F)
Humidity: 20% to 80% RH

• Avoid installing the scanner near equipment that generates a magnetic field (e.g. speakers,
televisions, or radios.)

Power

• Connect only to a power outlet of the rated voltage and power supply frequency. (120 V, 60 Hz or
220-240 V, 50/60 Hz depending on your region)

• Do not use a power supply that is not rated for the specified voltage. Doing so might cause a fire or
electric shock.

• Do not connect other electrical equipment to the same power outlet to which the scanner is
connected. Also, when using an extension cord, make sure that the extension cord is rated for the
current requirements of the scanner.

• The power cord may become damaged if it is often stepped on or if heavy objects are placed on it.
Continued use of a damaged power cord can lead to an accident, such as a fire or electrical
shock.

• Do not use the power cord while it is coiled.

• Do not pull directly on the power cord. When disconnecting the power cord, grasp the plug and
remove it from the outlet.

• Keep the area around the power plug clear of objects so that the power cord can be disconnected
easily in an emergency.

• If you have any questions regarding the power supply, contact your local authorized Canon dealer
or service representative for further information.

Moving the Scanner

• When moving the scanner, always hold it with both hands to avoid dropping it. The scanner weighs
approximately 14.3 lb (6.5 kg).

CAUTION

Make sure to disconnect the interface cable and power cord when moving the scanner. If the
scanner is transported with these items plugged in, the plugs and connectors may be
damaged.

1-2

Chapter 1 Before Using the Scanner

Handling

WARNING

Note the following precautions whenever using the scanner. Failure to do so may result in a
fire or electric shock.

■ Never use alcohol, benzene, paint thinner, aerosol sprays, or any other highly flammable

substance near the scanner.

■ Do not cut, damage, or modify the power cord. Do not place heavy objects on the power

cord, and do not pull or excessively bend the power cord.

■ Never connect the power cord when your hands are wet.

■ Do not connect the scanner to a multi plug power strip.

■ Do not knot or coil the power cord as this may result in a fire or electric shock. When

connecting the power cord, make sure that the power plug is securely and completely
inserted into the power outlet.

■ Do not use power cords other than the power cord provided with this scanner.

■ Never try to take the scanner apart or modify it in any way, as this is dangerous and may

lead to a fire or electric shock.

■ When cleaning the scanner, turn the power switch OFF and disconnect the power cord

from the power supply.

■ Clean the scanner using a slightly dampened cloth which has been well wrung out. Never

use alcohol, benzene, paint thinner, or any other flammable substances.

■ If the scanner makes strange noises, or gives off smoke, heat, or strange odors, or the

scanner does not function or other abnormalities occur when you use the machine,
immediately turn the power switch OFF, and disconnect the power plug from the power
outlet. Then, contact your local authorized Canon dealer or the service representative for
further information.

■ Do not drop the scanner, or subject it to impact or strong shock. Should the scanner ever

become damaged, immediately turn the power switch OFF, and disconnect the power plug
from the power outlet. Then, contact your local authorized Canon dealer or service
representative to have the unit serviced.

■ Before moving the scanner, be sure to turn the power switch OFF, and disconnect the

power plug from the power outlet.

CAUTION

■ Do not install the scanner on a surface that is unstable or tilted, or in an area subject to

excessive vibrations, as this may cause the scanner to fall, resulting in personal injury or
damage to the scanner.

■ Do not block ventilation openings. Doing so could case the scanner to overheat, creating

a risk of fire.

■ Never place small metal objects such as staples, paper clips, or jewelry on the scanner.

These items may fall into the scanner, and cause a fire or electric shock. Should such
objects ever fall inside the scanner, immediately turn the power switch OFF, and
disconnect the power plug from the power outlet. Then, contact your local authorized
Canon dealer or service representative to have the unit serviced.

■ Do not install the scanner in a humid or dusty location. Doing so might cause a fire or

electric shock.

1-3

Chapter 1 Before Using the Scanner

■ Do not place objects on top of the scanner. Such objects may tip or fall over, resulting in

personal injury.

■ When unplugging the power cord, grasp it firmly by its plug. Do not pull directly on the

power cord, as this may damage or expose the cord’s internal wiring, resulting in a fire or
electric shock.

■ Leave sufficient space around the power plug so that it can be unplugged easily. If objects

are placed around the power plug, you will be unable to unplug it in an emergency.

■ Do not allow water or flammable substances (alcohol, paint thinner, benzene, etc.) to spill

into the scanner, as this may result in a fire or electric shock.

■ Turn OFF the power switch for safety when not using the scanner for a long period of time,

such as overnight. Also, turn OFF the power switch, and disconnect the power cord from
the power outlet for safety when the machine will not be used for an extended period of
time, such as during consecutive holidays.

■ Do not wear loose clothing or jewelry that may get caught in the scanner while you are

using it. This may result in personal injury. Be extra careful of neckties and long hair. If
anything becomes caught in the scanner, immediately disconnect the power cord to stop
the scanner.

■ Be careful when placing paper in the scanner and when removing jammed paper. It is

possible to cut your hand on the edge of a sheet of paper.

Disposal

When disposing of this scanner, be sure to follow all local ordinances and laws or consult with the
retailer who sold you the scanner.

1-4

Chapter 1 Before Using the Scanner

1-2 Features of the DR-6010C Document

Scanner

The main features of the DR-6010C document scanner are described below.

• Fast Document Feeding

The scanner can scan a maximum of 60 documents per minute in a range of sizes from business
cards to LTR/A4 size. (Scanning conditions: Black and white, LTR/A4 size portrait, 200 dpi.)
Scanning speed is the same for both color and grayscale scanning.

• USB/SCSI Interface Supported

The USB interface that was provided as standard on your computer and SCSI extension cards
are supported. (See “2-2 Installation Requirements,” on p. 2-2.)

• Color/Grayscale Support

Documents can be scanned in 24-bit color or 256-level grayscale.

• Supports a Variety of Scanning Modes

The scanner supports the following scanning modes, depending on the document type:

- Single-sided/double-sided mode

- Single sheet/dual feeding path

• U-Turn Path

Documents are fed and ejected from the front of the scanner. (See “3-2 Document Tray and Eject

Tray,” on p. 3-3.)

• Straight Path

Documents are ejected to the back of the scanner. Note that the ejected documents are stacked
in the reverse order from which they were fed. (See “3-2 Document Tray and Eject Tray,” on p. 3-

3.)

• Paper Size Detection

The scanner automatically detects the size of a scanned document and eliminates any
unnecessary space around the edges of the image when storing the image, even when storing a
document of irregular size.

• Double Feed Detection

The scanner stops feeding documents after detecting more than one document being fed at the
same time. (See “Double Feed Detection Function,” on p. 3-30.)

• Deskew

The scanner straightens images after detecting that a document was placed askew.

• Card Scan

You can scan business or ID cards. Note that embossed credit cards or similar items cannot be
scanned. (See “3-1 Documents,” on p. 3-1.)

• Auto Color Detection

The scanner detects whether the scanned document is in color or black-and-white, and saves the
image accordingly.

• Text Orientation Recognition

This mode identifies the orientation of characters in a document, and rotates the image so the
orientation of the scanned characters is straight.

1-5

Chapter 1 Before Using the Scanner

• Text Enhancement Mode

This mode enables you to scan documents with dark backgrounds or documents with faint text
written in pencil clearly.

Note

This mode may not function effectively, depending on the document type.

• Dropout Color

The scanner is equipped with a Dropout Color function that enables you to specify a color for the
scanner to omit from the scanned image.

• Color Enhancement

The scanner is equipped with a Color Enhancement function that enables you to specify a color
for the scanner to enhance on the scanned image.

• Skip Blank Page Function

The scanner is equipped with a Skip Blank Page function that enables you to scan a document
without storing images of blank pages, regardless of whether each page of the document is two­sided or one-sided.

• Prescan Function

The scanner is equipped with a Prescan function that allows you to adjust the contrast and
brightness of a prescanned image and then send the adjusted image to the application software,
without needing to scan the document again.

• Remove Binder Holes

This mode erases the black spots that appear on scanned images from binding holes on the
original document.

• MultiStream Function

The scanner supports MultiStream, which, according to the application, can create two images
with different scanning conditions from one path scan.
However, this function can only be used if the software supports MultiStream. (See “MultiStream

Function,” on p. 3-33.)

• Long Document Compatibility

You can scan documents up to 118.1 inches (3000 mm) long by setting the Long Document
mode. (See “Long Document Mode,” on p. 3-30.)

• Compatible with Carbonless Duplicating Paper

The scanner is able to scan carbonless duplicating paper.

• Energy Saving Mode

This scanner is compatible with the International Energy Star Program, and is designed to save
power by using the energy saving feature except when scanning is being performed.

Note

Some functions may not be available depending on the software you are using.

1-6

Chapter 1 Before Using the Scanner

1-3 Names and Functions of Parts

This section describes the name and function of each part. Make sure to read this section and
familiarize yourself with the parts of the scanner before using the scanner.

■ Front View (Feed Tray Open)

Document Eject Tray Extension

Open if the document extends beyond the edge
of the eject tray. (See p. 3-3.)

Document Feed Tray

Place the document to be
scanned here. (See p. 3-3.)

Document Feed
Tray Extension

Pull this tray out if
the document hangs
over the edge of the
main tray.

(See p. 3-3.)

Document Eject
Tra y

Scanned documents
are ejected here. (See

p. 3-3.)

Document Guides

Adjust these guides to fit
the width of the document.

(See p. 3-6.)

■ Controls

Job Buttons

These buttons can perform user-specified functions
assigned with the Job Registration Tool. (See p. 3-9.)

Power Indicator

This indicator lights when the scanner is turned ON.

(See p. 2-14.)

Feed Selection Lever

Use this lever to change the way documents are fed.
Push it down ( ) to feed documents continuously
(page separation mode.) (See p. 3-5.)
Push it up ( ) to feed documents one at a time or to
feed documents that are fastened together, such as
invoices, without separating them (bypass mode.) (See

p. 3-7.)

Power Switch

This switch is used to turn the scanner ON. (See p. 2-13.)

1-7

Chapter 1 Before Using the Scanner

■ Back View

Document Eject Tray 2

Open this tray to use the
scanner in a straight path
configuration. (See p. 3-3.)

■ Interfaces (See “2-4 Connecting the Scanner to the Computer,” on p. 2-

11.)

DIP Switches

Set the SCSI ID.

SCSI Connector

Connect to a 50-pin half-pitch (pin type) SCSI cable.

1ON2

(Ventilation Holes)

USB Connector

Connect the provided USB
cable or a USB cable that
supports Hi-Speed USB 2.0.

Power Connector

CAUTION

• Do not block the ventilation openings. Doing so could cause the scanner to overheat,
creating a risk of fire.

• Do not connect both a USB cable and a SCSI cable at the same time. Doing so may
cause a malfunction.

1-8

Chapter 2

2-1 Setup Procedure

In order to prepare the scanner for use, read and follow the instructions in each section below.

Installation Requirements

Installing the Software

Connecting the Scanner to the Computer

Turning the Power ON

IMPORTANT

• Be sure to install the software before connecting the scanner to the computer.

• If you connect the scanner to the computer before installing the software, a wizard screen
such as shown below will appear when you turn power to the scanner ON. In such a case,
click the [Cancel] button to close the wizard screen and then turn power to the scanner OFF.

Setup

Wizard Screen (Windows Vista)

2-1

Chapter 2 Setup

2-2 Installation Requirements

To use the DR-6010C scanner, your computer must satisfy the following system requirements.

• One of the following operating systems:

- Microsoft Windows XP Professional SP3 or later

- Microsoft Windows XP Home Edition SP3 or later

- Microsoft Windows XP Professional x64 Edition SP2 or later

- Microsoft Windows Vista SP2 or later (32-bit Edition/64-bit Edition)

- Microsoft Windows 7 (32-bit Edition/64-bit Edition)

Microsoft Windows Vista has 32- and 64-bit versions.

• A computer that meets the following specifications:

- CPU: Celeron M (1.4 GHz or faster)

- Memory: 512 MB or more

- Hard disk: 1 GB or more available space

- Interface: USB port present as standard equipment on the computer (Hi-Speed USB 2.0)

- Monitor: Resolution of 1024 × 768 (XGA) or better recommended.

• When using a SCSI expansion card, select one of the following recommended models.

- AHA-2930U (Adaptec)

- PCI30U (Ratoc Systems)

- CB31U (Ratoc Systems)

• An ISIS-compatible application or a TWAIN-compatible application that is compatible with the
above operating systems.

Note

or SCSI expansion card

IMPORTANT

• If you do not know the requirements for your computer system, contact the store where you

purchased the computer or the manufacturer of the computer for more information.

• Do not connect both a USB interface and a SCSI card at the same time.

• Be aware of the following information when using the USB interface that was provided as

standard with your computer.

- The USB interface should be a Hi-Speed USB 2.0 interface.

- Scanning speeds are lower if your computer’s standard USB interface is USB Full-Speed
(equal to USB 1.1.) In this case, using a SCSI expansion card is recommended.

- Use the latest USB 2.0 driver made available by Microsoft. For details, consult your local
authorized Canon dealer.

- Normal operation is not guaranteed with all USB interfaces, even if present as standard
equipment on the computer. For details, consult your local authorized Canon dealer.

- The USB cable you are using should be the one originally included with the scanner or a
Hi-Speed USB 2.0 compatible cable.

• Be aware of the following information when using a SCSI card.

- Make sure to follow the procedure in the manual for the SCSI card and the computer that
you are using when installing a SCSI card in your computer.

- The overall length of the SCSI cable you can use is determined by the SCSI standards.
Refer to the manual for the SCSI card you are using for more information.

• If the CPU, memory, interface card, and other specifications do not satisfy the installation
requirements, the scanning speed may be greatly reduced and transmission may take a
long time.

2-2

Chapter 2 Setup

• Even if the computer satisfies the recommended specifications, the scanning speed may

• The ISIS/TWAIN Drivers provided with the scanner do not necessarily operate on all ISIS-

Precautions for Use in 64-bit Operating Systems

• The ISIS/TWAIN driver supplied with this product supports scanning with 32-bit applications only.

• Even with 32-bit applications, not all ISIS/TWAIN compliant applications are guaranteed to
operate.

• Scanning speed may vary depending on the specifications of your computer.

vary, depending on the scan settings.

or TWAIN-compatible applications. For details, contact your application software retailer.

2-3

Chapter 2 Setup

2-3 Installing the Software

This section describes how to install the required software.

Setup Disc

When you insert the Setup disc supplied with the scanner into the CD-ROM drive of your computer,
the menu shown below should appear. If this menu does not appear, use Explorer to access the CD­ROM drive and execute the file “SETUP.EXE.”

Note

The Setup disc of the DR-6010C is configured as follows.

Menu screen Typical Installation

All of the indicated software is installed.

Read Manuals Custom Installation

The User Manual and CapturePerfect

3.1 Operation Guide electronic manuals
for the scanner are installed on the
computer with the rest of the software.

Only the software with a
selected check box is installed.

2-4

Chapter 2 Setup

Software Installation

Install the software before connecting the scanner to the computer.

1 Log onto Windows with an account that has Administrator privileges.

IMPORTANT

• Be sure to log on as an Administrator.

• Close all other applications before installing the software.

2 Insert the DR-6010C Setup disc into the PC’s CD-ROM drive.

The menu screen appears automatically when you insert the CD-ROM into the CD-ROM
drive. If the setup wizard does not start up, execute setup.exe in the CD-ROM.

Menu Screen

3 Click [Typical Installation].

The [Typical Installation] screen appears.

Note

• When you select [Typical Installation], all of the displayed software and the User Manual will
be installed automatically. If you want to reinstall only specific software that you have
previously uninstalled, select [Custom Installation] and specify the software.

• The DR-6010C driver installation comprises the Scanner Driver and Job Tool installation.

2-5

Chapter 2 Setup

4 Click [Install].

Installation of the DR-6010C driver begins.

5 Click [Next].

The software license agreement appears.

6 Read the license agreement and click [Yes] to accept it.

The DR-6010C driver is installed.

Next, the job tool software is installed.

2-6

Chapter 2 Setup

7 The DR-6010C driver installation is complete.

8 Click [Finish].

Installation of CapturePerfect 3.1 starts.

9 Click [Next].

The software license agreement appears.

2-7

Chapter 2 Setup

10 Read the agreement and click [I accept the terms of the license agreement] to accept it, then

click [Next].

11 To install the Microsoft SharePoint plug-in, select the [Microsoft SharePoint Plug-in] check

box, and then click [Next].

12 Click [Next].

CapturePerfect is installed.

13 The CapturePerfect installation is complete.

2-8

Chapter 2 Setup

14 Click [Finish].

Installation of the User Manual starts.

15 Click [Next].

The User Manual is installed.

16 The User Manual installation is complete.

17 Click [Finish].

The installation completion screen appears.

2-9

Chapter 2 Setup

18 Click [Exit].

Click [Back] to return to the menu screen.

19 After the software installation is complete, you can connect the scanner to the computer.

(See “2-4 Connecting the Scanner to the Computer,” on p. 2-11.)

2-10

Chapter 2 Setup

2-4 Connecting the Scanner to the Computer

There are two methods for connecting the DR-6010C scanner to a computer: USB connection,
which makes use of a standard USB port on the computer, and SCSI connection, which makes use
of a SCSI card installed in an expansion slot of the computer. Select the method that is suitable for
your computer environment.

SCSI ID DIP Switches

Power Connector

USB Connector

SCSI Connector
(half-pitch 50-pin, pin-type)

CAUTION

Do not connect a USB cable and SCSI cable at the same time.

Using a USB Connection

1 Verify that the power switch of the scanner is OFF.

If the power switch is in the ON position, push the switch to set it to OFF.

Power switch

OFF position ON position

2 Plug the supplied power cord into the power connector on the back of the scanner. a

2-11

Chapter 2 Setup

3 Connect the power cord into an AC outlet. b

4 Use the supplied USB cable to connect the scanner to the computer.

Using a SCSI Connection

IMPORTANT

• Make sure that the computer is turned OFF before connecting the SCSI cable. If the cable is

• A SCSI cable is not supplied with the scanner. Purchase a cable that is suitable for the

• The SCSI ID of the scanner is set to “SCSI ID = 2” by default. When using a daisy-chain

Ty p e A

Ty p e B

symbol on plug should face down

connected while the computer is on, the scanner may not be properly recognized by the
computer.

scanner and for the SCSI connector on the computer.

configuration with other SCSI devices, set the DIP switches so that there is no duplication of
SCSI ID numbers in the system.

DIP switches

Factory default (SCSI ID = 2)

• The DR-6010C scanner incorporates a SCSI terminator which is permanently set to ON.
When using a daisy-chain configuration with other SCSI devices, make sure that the DR­6010C is connected as the last device in the chain. Set the terminators of all other devices
to OFF.

2-12

Chapter 2 Setup

1 Shut down Windows and turn the computer OFF.

2 Verify that the power switch of the scanner is OFF.

If the power switch is in the ON position, push the switch to set it to OFF.

3 Plug the supplied power cord into the power connector on the rear of the unit. a

Power swit ch

OFF position ON position

120 V Typ e

220-240 V Type

4 Connect the power cord into an AC outlet. b

5 Use the SCSI cable to connect the scanner to the computer.

2-13

Chapter 2 Setup

2-5 Turning the Power ON

When you turn the computer and the scanner ON, the Plug and Play function of Windows
recognizes the scanner and automatically installs the required device driver.

IMPORTANT

• When connecting the scanner to the computer using a SCSI cable, be sure to turn power to

• If you turn the power OFF, wait at least 10 seconds before turning it ON again.

• If you will not be using the scanner for an extended period, you should disconnect the power

Scanner Recognition

The scanner will be recognized the first time it is connected to the computer.

the scanner ON first, and then turn power to the computer ON. If you turn power to the
computer ON first, the scanner may not be properly recognized by the computer.

cord from the AC outlet for safety.

1 Make sure that the scanner and computer are connected properly.

2 Press the power switch to turn the scanner ON.

The power indicator lights green.

Power swit ch

Power indicator

ON

3 Turn the computer ON.

4 Log onto Windows with an account that has Administrator privileges.

5 Windows recognizes the DR-6010C automatically, and installation of the device driver begins.

Windows 7/Vista

Windows XP

2-14

Chapter 2 Setup

Note

• In Windows 7/Vista and Windows XP, a message appears when installation is complete.

• The DR-6010C is installed in Device Manager under [Imaging Devices] as [CANON DR­6010C USB] or [CANON DR-6010C SCSI].

About Auto Power OFF Function

This scanner includes an Auto Power OFF function. When this function is enabled, the
scanner will turn OFF automatically if no operations are performed for 4 hours.

The setting of the Auto Power OFF function can be changed as necessary. (See “Auto Power

OFF Function,” on p. 3-34.)

Note

Depending on your country or region, the Auto Power OFF function may be enabled under
factory default conditions.

IMPORTANT

The scanner’s power switch remains in the ON position even after the power is turned off by
the Auto Power OFF function. To turn the power back on again, turn off the power switch and
then turn it back on again. When doing this, wait at least 10 seconds after operation of the
Auto Power OFF function before turning the power back on again.

2-15