Canon DR-5020, DR-5080C User Manual 2

DOCUMENT SCANNER

INSTRUCTIONS

Instructions

Mode d’emploi

Bedienungsanleitung

Instrucciones

Intruzioni

ENGLISH FRANÇAIS DEUTSCH ESP AÑOL IT ALIANO

Instructions

DOCUMENT SCANNER

Be sure to thoroughly read this Instructions before using this unit, and store this manual in a safe place after use.

INSTRUCTIONS

ENGLISH

NOTICE

transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in an y form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior permission of CANON ELECTRONICS INC.

w The contents of this manual are subject to change without notice. e Every effort has been made to ensure the accuracy of information presented in this manual. Ho wever , Canon Electronics Inc.

and the subsidiaries on the back cover assume no responsibility for any errors or their consequences.

r We do not assume any responsibility for damage resulting from operations regardless of item e.

Trademarks and Registered Trademarks

● Microsoft WindowsR and Microsoft Windows NTR are registered trademark of Microsoft Corporation in the U.S. and in

other countries.

● ISISR is a registered trademark of Pixel Translation A Division of ActionPoint Inc.

● Product names mentioned herein are for identification purposes only and may be trademarks and/or registered trademarks of

their respective companies.

INTRODUCTION

Thank you purchasing the Canon Document Scanner DR-5020/5080C. In all, three manuals are provided with the DR-5020/5080C: DR-5020/5080C Instructions (this manual), Scanning Utility 5000 Instructions and ISIS/TWAIN Driver Instructions. This manual describes handling of the scanner, for example, how to connect the scanner, load paper and remove jammed paper. It also describes precautions to follow when handling the scanner. To fully understand the functions of this scanner and ensure that its functions are effectively utilized, be sure to read this manual (DR-5020/5080C Instructions) and the separate Scanning Utility 5000 Instructions and ISIS/TWAIN Driver Instructions. Scanner drivers such as an ISIS or TWAIN driver are not required as the scanner application packaged with the DR-5020/5080C uses an exclusive scanner driver. After you have read these manuals, be sure to store them in a safe place.

The following describes the contents of each of these manuals.

DR-5020/5080C Instructions (this manual)

This manual describes how to connect the scanner, load documents, remove jammed paper and other information on how to handle the scanner. Read this manual before you start to operate the DR-5020/5080C.

ENGLISH

Scanning Utility 5000 Instructions

This manual describes how to operate the scanner application “Scanning Utility 5000” provided with the scanner.

ISIS/TWAIN Driver Instructions

This manual describes operations when the scanner is used with an ISIS driver or TWAIN driver compatible application.

■ Caution

Take note of the following when using the scanner to make copies:

• Reproducing money, other forms of currency or negotiable securities is an offense and may be subject to criminal prosecution.

• Reproducing official certificates, licenses, travel tickets, copyright protected and private documents and other items is also against the law and may be subject to criminal prosecutions.

• Obtain the copyright holder’s permission when a copied image will be used for anything other than your own personal use or use within the confines of your own household.

CONVENTIONS

This manual uses the following symbols and indications. Before you start reading this manual, read the following and familiarize yourself with their meanings.

Read carefully to avoid death or serious injury.

WARNING

Read carefully to avoid damage to the equipment or loss of valuable data.

CAUTION

Memos indicate where you will find useful information in this manual. A number

MEMO

enclosed in parentheses refers to a page number that contains more information about the previous sentence or paragraph.

Tips about operations and how to avoid minor difficulties.

HINT

■ This Unit

This manual refers to the DR-5020 and DR-5080C collectively as the “scanner.” If a description is required for each individual machine type, this manual refers to the scanner specifically by DR-5020 and DR-5080C.

INTRODUCTION..........................................................................................1

CONVENTIONS...........................................................................................2

Safety Precautions.....................................................................................6

Chapter 1 About DR-5020/5080C 11

1.1 Features of DR-5020/5080C ............................................................12

1.2 Packaging: What’s in the Box? ......................................................14

1.3 Part Names...................................................................................... 15

◆ Front view ............................................................................................. 15

◆ Rear view .............................................................................................. 16

◆ Operation panel .................................................................................... 17

◆ Removable tray..................................................................................... 20

◆ Document eject support plate ............................................................... 20

◆ Function key labels ............................................................................... 20

ENGLISH

Chapter 2 Preparation Before Use 21

2.1 System Requirements.....................................................................22

2.2 Installation and Connection............................................................23

Carrying .................................................................................................... 23

Connecting to a Computer........................................................................ 24

◆ Connecting the SCSI cable................................................................... 24

◆ Setting the SCSI ID and terminator ...................................................... 25

Connecting the Power Cord...................................................................... 26

◆ Connecting the power cord................................................................... 26

2.3 Preparing for Paper Feed and Eject...............................................27

Preparing the Document Tray Extension and Document Eject Tray

Extension .................................................................................................. 27

◆ Document tray extension ...................................................................... 27

◆ Document eject tray extension ............................................................. 29

◆ Document eject support plate ............................................................... 30

◆ Removable tray..................................................................................... 31

Paper Feed Adjustment ............................................................................ 32

Affixing the Document Guide Labels ........................................................ 32

2.4 Turning the Power ON/OFF.............................................................33

Turning the Power ON .............................................................................. 33

Turning the Power OFF ............................................................................ 34

Chapter 3 Preparing Documents 35

3.1 About Documents............................................................................36

3.2 Document Feeding and Scanning..................................................38

Scan Procedure ........................................................................................ 39

◆ Remote mode ....................................................................................... 40

◆ Semi-Auto mode ................................................................................... 43

◆ Auto mode ............................................................................................. 46

◆ Manual mode ........................................................................................ 50

Counting the Number of Originals In a Document.................................... 53

Function Sheets........................................................................................ 55

3.3 Setting Scan Conditions ................................................................ 58

Basic Settings ........................................................................................... 59

Function Key Settings............................................................................... 60

◆ Manual Thickness Adjustment .............................................................. 61

◆ Imprinter ON/OFF ................................................................................. 62

◆ Fixed Thickness Mode ON/OFF ........................................................... 62

◆ Double Feed Detection ON/OFF .......................................................... 63

◆ Restore Memorized Setting ON/OFF.................................................... 63

Setting in the User Mode .......................................................................... 64

◆ How to Set the User mode.................................................................... 65

Chapter 4 Troubleshooting 67

4.1 When The Scanner Is Not Recognized ..........................................68

4.2 Removing Paper Jams ................................................................... 70

Paper Jam in the Paper Feed Unit ........................................................... 70

Paper Jam in Paper Exit Section.............................................................. 73

4.3 Paper Feed Trouble .........................................................................75

4.4 When The Scanned Image is Not Normal......................................77

4.5 When An Error Code is Displayed ................................................ 78

Chapter 5 Daily Cleaning 81

5.1 Daily Cleaning..................................................................................82

Cleaning the Main Unit ............................................................................. 82

Cleaning the Scanning Glasses and Rollers ............................................ 83

Power Cord ............................................................................................... 87

Imprinter.................................................................................................... 87

Appendix.................................................................................................. 88

◆ DR-5020/5080C Scan Mode Tables ..................................................... 88

DR-5020/5080C Specifications................................................................90

Options..................................................................................................... 92

Index......................................................................................................... 93

ENGLISH

Safety Precautions

Daily Maintenance

When you are working around the unit, follow these precautions to avoid the hazards of fire and electrical shock:

■Never install and operate the unit near flammable substances such as alcohol, paint

WARNING

thinner, benzene, or any other type of volatile solution.

■Never damage or modify the power cord, and never place heavy objects on the power cord.

■Always make sure that your hands are dry when you are handling the power cord or plug. Never grasp the plug when your hands are wet.

■Never plug the unit into a multi-plug power strip.

■Never bundle, wrap, or tie the power cord around itself or another object. Connect

the plug securely to the power source.

■Use only the power cord and plug provided with the scanner.

■Never attempt to disassemble or modify the unit.

■Never use flammable aerosol products near the unit.

■Before you clean the unit, turn the power OFF and disconnect the power cord from

the power outlet.

■To clean the unit exterior, use a firmly wrung cloth moistened slightly with water or mild detergent. Never use any type of volatile solution such as alcohol, benzine or paint thinner.

■If you hear a strange sound, detect smoke or abnormal heat, sense vibration, or smell odd odors around the unit, turn the power switch OFF immediately and disconnect the power cord from the outlet. Call for service immediately.

■Handle the unit with care. Avoid shocks and vibrations to the unit caused by reckless handling. If you suspect the unit has been accidentally damaged, turn the power switch OFF immediately, disconnect the power cord from the outlet, and call for service.

■Before you move the unit, always turn the power OFF and disconnect the power cord from the power outlet.

CAUTION

■To avoid damage to the unit, never place the unit on an unstable or vibrating surface. The unit may tip or fall over, and cause an injury.

■To avoid overheating and causing a fire, never block the air vents on the rear of the scanner.

■Keep all liquids, beverages, or any type of liquid, and clips, staples, necklaces or other metal objects away from the unit. If you accidentally spill liquid or drop a metal object into the unit, turn the unit power OFF, disconnect the power cord from the power outlet and call for service immediately.

■Never install the unit in humid or dusty locations. Doing so might cause fire or electric shock.

■Never place heavy objects on top of the unit. Such objects may tip or fall over, and cause an injury.

■When you remove the power cord, grip it by the plug head. Never attempt to disconnect the cord from the outlet by pulling on the cord. Doing so might expose or break the core leads, damage the power cord, and cause a fire or electrical shock.

■Keep the area around the power outlet clear of all obstacles so you can disconnect the power cord easily at all times.

■Never spill water or type of volatile solution (alcohol, benzene, paint thinner) into the unit. Doing so might cause a fire or electrical shock.

■When the unit is not being used for a long time, disconnect the power cord from the power outlet.

■Avoid wearing loose fitting clothing, dangling jewelry, long ties, or even long hair that could become entangled with moving parts, especially the rollers that feed the unit. If such objects become entangled, immediately disconnect the power plug from the power outlet to stop the unit.

■Be very careful when you are loading a document or removing a paper jam. You may be injured unexpectedly. For example, the paper edges may cut your fingers.

■Do not open the top unit while the scanner is operating. Doing so might result in malfunction or injury.

■Do not directly touch the pins and contacts on the scanner connector with your hands. Doing so might result in malfunction.

ENGLISH

About the Installation Location

More than 100 mm (3.9 in.)

600 mm (23.6 in.) (with document tray extension closed)

More than 630 mm (24.8 in.)

More than 100 mm (3.9 in.)

750 mm (29.5 in.) (with document tray extension, extention wire open)

For operation, maintenance and ventilation, make sure that there is enough space around the scanner as shown in the illustration above. Do not place the unit in the following places. Doing so might cause malfunction or machine trouble, and adversely affect the unit or your personal computer.

• Places subject to direct sunlight If installation in such places is unavoidable, provide a curtain or similar object to shade the unit.

• Places subject to dust and fumes. Dust and cigarette fumes adversely affect the components inside the unit.

• Near running water, a heat source, water vapor, or in an area such as a laboratory exposed to ammonia gas, paint thinner, or other volatile chemicals.

• Places subject to vibration and strong shock

• Places subject to rapid changes in temperature or humidity

Condensation occurring inside the unit may impair scan image quality. Place the scanner in a room that is well within the following range:

Room temperature 10°C to 32.5°C (50°F to 90.5°F) Relative humidity 20% to 80% RH

• Near electronic equipment or heavy equipment that generates a strong magnetic field such as speaker, TV and radio.

About the Power Supply

• Be sure to connect to a AC 220-240V (50/60 Hz)/AC 120V (60 Hz) power supply.

• Ensure that the scanner is connected to an independent power outlet. Do not plug the scanner into an outlet shared with another device. If you use an extension cable, pay attention to the total amperage of the cable.

• If you are unsure of anything relating to the power supply, contact your store of purchase or your local power company.

• Never place an object on top of the power cord or step on it.

• Never bundle the power cord or wrap the cord around an object such as a table

leg.

• Do not tug the power cord. When you remove the power cord, grip it by the plug head.

• Keep the area around the power outlet free of obstacles.

Carrying

When you move the DR-5020/5080C, hold it firmly with both hands as shown in the figure below and carry it carefully. If you carry it without holding its handles, you may drop it, nip your fingers and cause unexpected injuries. The scanner weights approximately 20 kg (44.2 lb).

ENGLISH

WARNING

Before you move the scanner, always turn the power switch OFF and disconnect the power cord from the power outlet. Also, disconnect the SCSI cable from the connector. Moving the scanner with the power still ON or the SCSI cable still connected might result in electrical shock.

Chapter 1

About DR-5020/5080C

This chapter describes the features of the scanner, what’s in the box, and the names and functions of parts on the scanner.

1.1 Features of DR-5020/5080C .............. 12

1.2 Packaging: What’s in the Box? ........ 14

1.3 Part Names..........................................15

Chapter 1 About DR-5020/5080C

Features of DR-5020/5080C

The DR-5020/5080C are versatile document image scanners with high speed scanning performance. Both units deliver excellent black-and-white image data. The DR-5080C also includes features for color and grayscale scanning needs. Here is a summary of the outstanding features of both scanners.

● High speed scanning

Small documents such as business cards and check-size documents through to A3/11" x 17"-size documents can be scanned at high speed. The maximum scan speed is 50 sheets per minute (A4/LTR-size portrait in simplex and duplex mode, 200 dpi resolution) when scanning an A4/LTR-size document in the simplex mode.

● Large capacity, reliable paper feeding

- Up to 500 sheets of A4/LTR-size documents can be loaded at once.

- A wide range of size and thickness of documents can be scanned. Paper feeding is highly reliable. Document skew is automatically aligned as it passes through the scanner. The scanner accurately handles documents of various size and thickness.

● Easy operation

Documents are fed and output from the front of the unit. This means that you require limited installation place. Setups and operations, including Text/Picture mode selection, Simplex/Duplex selection, Brightness adjustment, and etc. can be performed by either from control panel or by the application.

● Skew detection

This function automatically detects if the document is fed in at an angle, and straightens skewed documents.

● Highly durable

The unit features a service life of up to 6 million scans.

● Compact size

262 (H) x 427 (W) x 485 (D) mm / 10.3 (H) x 16.8 (W) x 19.1 (D) in.

1.1 Features of DR-5020/5080C

● Simple color or black-and-white gray-scale output (DR-5080C)

Besides black-and-white 2-bit output, this unit supports various output modes: gray-scale (4, 16, 256 levels) and color (3, 6, 12, 24 bits). Optional memory may need to be added on depending on the scanning mode. Also, not all modes are supported depending on the application and scanner driver in use. For more details, thoroughly read the instruction manuals for the application and scanner driver in use.

● Drop-out color (DR-5080C)

This function disables drop-out scanning of (that is, “drops out”) a specific color in the document.

● Various options

The wide range of options includes the imprinter for printing characters on the document being scanned, bar code decoder for reading bar codes in documents, and the endorser for printing numbers and characters on the document after scanning.

ENGLISH

Chapter 1 About DR-5020/5080C

Packaging: What’s in the Box?

Make sure that you have everything. Check every item you have removed from the box. If any items are missing, contact your store of purchase.

DR-5020/5080C Instructions

Scanning Utility 5000 Instructions

ISIS/TWAIN Driver Instructions

Function key labels

DR-5020/5080C

Instructions

Removable tray Document eject

support plate

*1 The power cord varies according to country of purchase. *2 For U.S.A. and Canada only.

Setup CD-ROM

Scanning Utility 5000 and ISIS/TWAIN Driver

Function sheets

Warranty card

Power cord

1.3 Part Names

Part Names

This section describes the names and functions of each part. Before you connect the DR-5020/5080C, take a few minutes to familiarize yourself with the main parts.

◆ Front view

Document eject tray

After a document is scanned, it is ejected onto this tray.

Document eject tray extension/stopper

This tray prevents large-size scanned documents from falling onto the floor. Lift up the stopper to prevent documents from flying out of the document eject tray extension.

Document guide

Set the paper guide for the width of the document you are going to scan.

Power switch

Turns the scanner power ON and OFF.

Document tray extension/ extension wire

Open out this extension when you are loading large-size documents. Open out the extension wire when you are scanning documents larger than A4/LTR.

Open/close button

Press this button to open the upper unit.

Imprinter cover

Open out this cover when you are adjusting the print position of the optional imprinter.

Document tray

Load the document in this tray.

Paper feed adjustment lever (P.32)

Slide this lever to adjust paper feed according to the condition of the paper surface.

Upper unit

Operation panel (P. 17)

This panel is for setting up scan density and other functions. The number of scanned pages and error codes are also displayed here.

ENGLISH

CAUTION

The imprinter cover does not open when the optional imprinter is not installed. Do not exert unnecessary force to open the imprinter cover.

Chapter 1 About DR-5020/5080C

◆ Rear view

CAUTION

Air vent

DIP switch

This switch is for setting the SCSI ID and turning the terminator ON or OFF. (P.25)

SCSI connectors

Connect the SCSI connectors to these connectors. Connector shape: D-sub half-pitch 50-pin (pin type)

Power cord connector

Connect the power cord provided with the scanner to this connector.

To avoid overheating and causing a fire, never block the air vents on the rear of the scanner.

◆ Operation panel

1.3 Part Names

(1)Function keys (P. 60)

(2)Simplex/Duplex key

(3)Mode Selection keys

(4)Brightness keys

(5)Counter display

(6)Feeding Option key

(7)Count Only key

(8)New File key

(9)Stop key

(10)Start key

ENGLISH

(1)Function keys (P.60)

Frequently used functions can be registered to these keys so that they can be called up later by one-touch operation.

(2)Simplex/Duplex key

Selects whether to scan only one side of the document or both sides. Simplex: Light to scan only side of the document. Duplex: Light to scan both sides of the document.

Chapter 1 About DR-5020/5080C

(3)Mode Selection key

Select the document scanning mode. (“Black and white/Black and white error diffusion”) Text: This is lighting, when scanning the text documents (including mostly

characters) with black and white mode.

Picture: This is lighting, when scanning the picture documents including

photographs with black and white error diffusion mode.

If any applications are set with gray scale mode or color mode for the image selection, either of above will not be lighting.

(4)Brightness key

Sets the brightness when the document is scanned. To automatically adjust the brightness, press the To manually set the brightness, press the move the indication on the key indicator to adjust the brightness. (Moving the indicator to the right increases the brightness, and to the left decreases the brightness. The brightness can be adjusted in 13 steps.) If you press the

or keys with the key lit to adjust the indicator, the automatic adjustment level is adjusted. In the Count Only mode, you can set the count start value with the keys.

key to light .(*)

or keys with the key out, and

(*) Brightness can be automatically adjusted only when brightness is set to

“Auto” in the scan condition setup on the application and the scan mode is set to “Black and White”. If the scan mode is other than “Black and White” and brightness is set to “Auto”, the

key will not light, and the default (indicator center value)

brightness is set. Brightness is not adjusted automatically in this case.

(5)Counter display

Displays an error code or the number of pages in the scanned document.

(6)Feeding Option key (P.39)

Selects the document feed mode. Each press of the Feeding Option key changes the lamp indication on its left cyclically as follows: OFF (Remote Mode) → [Semi-Auto] → [Auto] → [Manual] → and back to OFF (Remote Mode) Remote: The three lamps to the left of this key are all out. The document is

fed when the scanner receives a scan start instruction from the computer.

Semi-Auto: The scanner feeds the document when you press the Start key

after loading the document.

Auto: The scanner automatically feeds the document when you load the

document.

Manual: Manually load the document one sheet at a time.

1.3 Part Names

(7)Count Only key (P.53)

Sets the scanner to the Count Only mode for just counting the number of pages in the document. When you press this key, it will light. If you load the document and press the Start key in this state, the document will be fed and the scanner will count the number of pages. (The document will not be scanned.) The document page count is displayed on the counter display.

(8)New File key

Press this key to save scanned images to separate files. When you press this key, it will light. When you scan the next document in this state, the scanned image will be saved to a folder separate from the folder for the previous document. When Auto New File is set in the application, this key lights automatically when each document stack has finished being scanned.

(9)Stop key

Press this key to stop scanning midway. Also use this key to cancel the currently set mode and cancel an error displayed on the counter display. To reset the counter display to “0000” hold down this key for at least two seconds.

ENGLISH

(10)

Start key

Press this key to start scanning when the feed mode is set to Semi-Auto.

Chapter 1 About DR-5020/5080C

◆ Removable tray

This tray can be installed on the document eject tray to prevent short-length documents from flying out of the tray when they are ejected from the scanner.

◆ Document eject support plate

Install this plate when scanning large-size (e.g. A3/11" x 17") thin documents. This plate prevents such documents from becoming caught on the document eject tray and curling.

◆ Function key labels

Two labels are provided: a label describing which function is registered to the function key and a label for fixing on the document tray as the document guide.

Function key labels

Document guide labels

Chapter 2

Preparation Before Use

This chapter describes the procedure from scanner connection through to turning the power ON.

2.1 System Requirements....................... 22

2.2 Installation and Connection ..............23

2.3 Preparing for Paper Feed and Eject..27

2.4 Turning the Power ON/OFF................33

Chapter 2 Preparation Before Use

System Requirements

To use the DR-5020/5080C, you need the following items in addition to the standard accessories:

● Computer

● SCSI card

● SCSI cable

● Application

• The driver may not function properly depending on the application you are using.

MEMO

• Select a computer, operating environment and SCSI card to suit the application you are using.

2.2 Installation and Connection

Installation and Connection

This section describes scanner installation and connection.

For details on the scanner installation location, see “About the Installation Location” in the Safety Precautions (P.8).

MEMO

Carrying

ENGLISH

WARNING

Chapter 2 Preparation Before Use

Connecting to a Computer

Connect the scanner to the computer.

Before you connect the scanner to the computer, be sure to turn both the scanner and

CAUTION

HINT

Follow the procedure below to connect the scanner to the computer.

1. Connect the scanner to the computer by the SCSI cable. (P.24)

2. Set the SCSI ID and terminator. (P.25)

the computer OFF.

The following items are also needed when you connect the scanner:

●SCSI card Check that the SCSI card is installed on your computer. Use a SCSI card that is compatible with the driver application you are using.

●SCSI cable The scanner’s SCSI connector is a D-sub half-pitch 50-pin (pin type) connector. Check the shape of the connector on your computer’s SCSI card and on the SCSI device connected to your computer, and prepare a SCSI cable that is compatible with the connector that can be connected to the scanner.

◆ Connecting the SCSI cable

Before you connect the SCSI cable, make sure that the scanner and the computer are

CAUTION

Connect your computer to the scanner using the SCSI cable. Two SCSI connectors are located on the rear of the scanner. Insert the SCSI cable from the computer into one of these connectors. To connect another SCSI device to the computer, insert the other SCSI cable into the vacant SCSI connector on the rear of the scanner, and connect the other end of the SCSI cable into the SCSI device in a daisy chain.

turned OFF.

Half-pitch 50-pin (pin type)

Insert until you hear it click in place.

Half-pitch 50-pin (pin type)

Insert into either of these two ports.

2.2 Installation and Connection

◆ Setting the SCSI ID and terminator

Set the SCSI ID and terminator using the DIP switch on the rear of the scanner. The DIP switch is ON at the up position and OFF at the down position.

Default

(Terminator : OFF, SCSI ID = 2)

SCSI ID switch

Terminator ON/OFF switch

DIP switch

SCSI ID

0 1 2 3 4 5 6 7

SW2

ON ON ON

ON OFF OFF OFF OFF

SW3

ON OFF OFF

SW4

OFF

Set the SCSI ID referring to the table above. Set unique SCSI IDs to any other built-in SCSI devices or SCSI devices connected to the computer.

The SCSI ID default is set to 2.

HINT

Assign SCSI ID numbers ranging from 0 to 7 for each SCSI device. Do not select 7 as this is normally assigned to the SCSI controller. If a SCSI hard disk is mounted, do not use 0 and 1. Normally 0 and 1 are assigned for hard disks.

Set the terminator on the last SCSI device on a daisy chain to ON. <When only the scanner is connected to your computer, or when another SCSI

device is connected on a daisy chain and the scanner is the last SCSI device on the end of the daisy chain> Set the terminator switch to ON. In such a connection, be sure to set the terminator on all other SCSI devices to OFF.

Terminator OFF

Terminator ON

ENGLISH

<When another SCSI device is connected as the last device of the daisy chain> Set the terminator switch on the scanner to OFF. In such a connection, set the terminator on the SCSI device connected as the end device to ON.

Terminator ON, or attach terminator.

Terminator OFF

Chapter 2 Preparation Before Use

Connecting the Power Cord

Connect the power cord. Be sure to use only the power cord provided with the scanner.

◆ Connecting the power cord

When connecting the power cord, follow these precautions. Failure to do so might

WARNING

Connect the power cord to the rear of the scanner, and insert the power plug into the power outlet.

cause a fire or electrical shock.

• Never grasp the plug when your hands are wet.

• Never plug the unit into a multi-plug power strip.

• Never bundle or tie the power cord around itself or another object. Connect the plug

securely to the power source.

• Use only the power cord and plug provided with the scanner.

• Before you connect the power cord, be sure to turn the power switch OFF.

• Be sure to connect to a AC 220-240V (50/60 Hz)/AC 120V (60 Hz) power supply.

• Do not plug the scanner into an outlet shared with another device. If you use an

extension cable, pay attention to the total amperage of the cable.

2.3 Preparing for Paper Feed and Eject

Preparing for Paper Feed and Eject

Pull out the paper feed section and eject section or detachable tray or support plate to accommodate the size of the document to be scanned. Also, affix the label for aiding adjustment of the document guide.

Preparing the Document Tray Extension and Document Eject Tray Extension

Use the document tray extension and document eject tray extension to accommodate the size of the document to be scanned. The document eject support plate and removable tray can also be used to accommodate difficult to scan documents.

ENGLISH

◆ Document tray extension

Pull the document tray extension to accommodate the size of the document to be scanned.

Pull out the document tray extension from the center of the document tray.

+ 452 hidden pages

Canon DR-5020, DR-5080C User Manual 2

INTRODUCTION

CONVENTIONS

CONTENTS

Safety Precautions

Chapter 1

Features of DR-5020/5080C

Packaging: What’s in the Box?

1.3 Part Names

Chapter 2

System Requirements

2.2 Installation and Connection

2.3 Preparing for Paper Feed and Eject