Brother DCP-7055, DCP-7060D, DCP-7065DN User's Guide

Page 1

SOFTWARE USER’S GUIDE

Not all models are available in all countries.

For DCP users; This documentation is for both MFC and DCP models. Where it says ‘MFC’ in this user’s guide, please read ‘MFC’ as ‘DCP’.

Version A

ASA

Page 2

Section I Machine operation keys

1 Using the control panel 2

Using printer keys......................................................................................................................................2

Job Cancel...........................................................................................................................................2

Secure Key (For MFC-7460DN, MFC-7470D, MFC-7860DN and MFC-7860DW) .............................2

Printer Emulation Support (For MFC-7470D, MFC-7860DN and MFC-7860DW) ...............................3

Printing the Internal Font List (For MFC-7470D, MFC-7860DN and MFC-7860DW) ..........................4

Printing the Print Configuration List (For MFC-7470D, MFC-7860DN and MFC-7860DW) ................4

Test Print (For MFC-7470D, MFC-7860DN and MFC-7860DW).........................................................5

Duplex Print (For MFC-7470D, MFC-7860DN and MFC-7860DW) ....................................................5

Restoring default printer settings (For MFC-7470D, MFC-7860DN and MFC-7860DW) ....................6

Using the scan keys...................................................................................................................................7

Section II Windows

2Printing 9

Using the Brother printer driver..................................................................................................................9

Printing a document.................................................................................................................................10

Duplex printing.........................................................................................................................................11

Guidelines for printing on both sides of the paper .............................................................................11

Automatic duplex printing (Not available for DCP-7055, MFC-7360, MFC-7362N and

MFC-7360N)..................................................................................................................................11

Manual duplex printing ......................................................................................................................11

Simultaneous scanning, printing and faxing ............................................................................................12

Printer driver settings...............................................................................................................................13

Accessing the printer driver settings........................................................................................................14

Features in the Windows

Basic tab..................................................................................................................................................16

Paper Size .........................................................................................................................................16

Orientation .........................................................................................................................................17

Copies ...............................................................................................................................................17

Media Type........................................................................................................................................17

Resolution..........................................................................................................................................18

Print Settings .....................................................................................................................................18

Multiple Page.....................................................................................................................................18

Duplex / Booklet ................................................................................................................................19

Paper Source ....................................................................................................................................20

Advanced tab...........................................................................................................................................21

Scaling...............................................................................................................................................21

Reverse Print.....................................................................................................................................21

Use Watermark..................................................................................................................................22

Watermark Settings ...........................................................................................................................22

Header-Footer Print...........................................................................................................................24

Toner Save Mode ..............................................................................................................................24

printer driver..................................................................................................15

Page 3

Secure Print (For MFC-7460DN, MFC-7470D, MFC-7860DN and MFC-7860DW) ..........................24

Administrator .....................................................................................................................................25

User Authentication (For MFC-7860DN and MFC-7860DW) ............................................................26

Other Print Options............................................................................................................................26

Macro (For MFC-7470D, MFC-7860DN and MFC-7860DW) ............................................................26

Density Adjustment............................................................................................................................26

Improve Print Output .........................................................................................................................27

Skip Blank Page ................................................................................................................................27

Print Profiles tab ......................................................................................................................................28

Editing a print profile................................................................................................................................29

Support ....................................................................................................................................................30

Tray Settings............................................................................................................................................32

Status Monitor..........................................................................................................................................34

Features in the BR-Script 3 printer driver (For MFC-7470D, MFC-7460DN and MFC-7860DW)

(PostScript

3™ language emulation)..................................................................................................35

Printing Preferences ..........................................................................................................................35

Advanced options ..............................................................................................................................37

Ports tab ...........................................................................................................................................39

Status Monitor..........................................................................................................................................40

Monitoring the machine’s status ........................................................................................................41

3 Scanning 42

Scanning a document using the TWAIN driver........................................................................................42

Scanning a document into the PC .....................................................................................................42

Pre-Scanning to crop a portion you want to scan..............................................................................44

Settings in the Scanner Setup dialog box..........................................................................................46

Scanning a document using the WIA driver (Windows

WIA compliant ...................................................................................................................................49

Scanning a document into the PC .....................................................................................................49

Pre-Scanning and cropping a portion using the scanner glass .........................................................51

Scanning a document using the WIA driver (Windows Photo Gallery and Windows Fax and Scan)......55

Scanning a document into the PC .....................................................................................................55

Pre-Scanning and cropping a portion using the scanner glass .........................................................57

Using ScanSoft™ PaperPort™ 12SE with OCR by NUANCE™* ...........................................................59

Viewing items ....................................................................................................................................59

Organizing your items in folders ........................................................................................................60

Quick links to other applications ........................................................................................................60

ScanSoft™ PaperPort™ 12SE with OCR lets you convert image text into text you can edit............61

Importing items from other applications.............................................................................................61

Exporting items into other formats.....................................................................................................61

Uninstalling ScanSoft™ PaperPort™ 12SE with OCR......................................................................62

XP/Windows Vista®/Windows®7) ...................49

Page 4

4 ControlCenter4 63

Overview..................................................................................................................................................63

Changing the user interface ..............................................................................................................63

Using ControlCenter4 in Home Mode......................................................................................................64

ControlCenter4 Features for Home Mode users ...............................................................................65

Scan tab ..................................................................................................................................................66

File types ...........................................................................................................................................67

Document Size ..................................................................................................................................68

Saving the scanned image ................................................................................................................68

Printing the scanned image ...............................................................................................................68

Opening the scanned image in an application...................................................................................69

Attaching the scanned data to E-mail................................................................................................69

Using the OCR feature ......................................................................................................................70

PC-FAX tab (MFC models only) ..............................................................................................................71

Sending an image file from your computer........................................................................................72

Sending a scanned image .................................................................................................................72

Viewing and printing received PC-FAX data .....................................................................................73

Device Settings tab..................................................................................................................................74

Configuring Remote Setup ................................................................................................................74

Accessing Quick Dial.........................................................................................................................75

Configuring Scan button settings.......................................................................................................75

Launching the BRAdmin utility...........................................................................................................76

Support tab ..............................................................................................................................................77

Opening ControlCenter Help .............................................................................................................77

Using Brother Solutions Center .........................................................................................................77

Accessing the Brother CreativeCenter ..............................................................................................77

Using ControlCenter4 in Advanced Mode ...............................................................................................78

ControlCenter4 Features for Advanced Mode users .........................................................................79

Scan tab ..................................................................................................................................................80

File types ...........................................................................................................................................81

Document Size ..................................................................................................................................81

Opening the scanned image in an application...................................................................................82

Using the OCR feature ......................................................................................................................82

Attaching the scanned data to E-mail................................................................................................82

Saving the scanned image ................................................................................................................83

PC-Copy tab ............................................................................................................................................84

Printing the scanned image ...............................................................................................................84

PC-FAX tab (MFC models only) ..............................................................................................................85

Sending an image file from your computer........................................................................................85

Sending a scanned image .................................................................................................................85

Viewing and printing received PC-FAX data .....................................................................................86

Device Settings tab..................................................................................................................................87

Configuring Remote Setup ................................................................................................................87

Accessing Quick Dial.........................................................................................................................87

Configuring Scan button settings.......................................................................................................88

Launching the BRAdmin utility..................................................................................................

Support tab ..............................................................................................................................................90

Opening ControlCenter Help .............................................................................................................90

Using Brother Solutions Center .........................................................................................................90

Accessing the Brother CreativeCenter ..............................................................................................90

Custom tab ..............................................................................................................................................91

Creating a Custom tab.......................................................................................................................91

Creating a Custom button..................................................................................................................92

.........89

iii

Page 5

5 Remote Setup (MFC models only) 93

Remote Setup..........................................................................................................................................93

6 Brother PC-FAX Software (MFC models only) 95

PC-FAX sending......................................................................................................................................95

Setting up user information................................................................................................................95

Sending setup....................................................................................................................................96

Setting up a cover page.....................................................................................................................97

Entering cover page information........................................................................................................98

Sending a file as a PC-FAX using the Facsimile style user interface ................................................98

Sending a file as a PC-FAX using the Simple style user interface ..................................................100

Address Book ........................................................................................................................................102

Brother Address Book .....................................................................................................................103

Setting up a member in the Address Book ......................................................................................103

Speed Dial setup .............................................................................................................................104

Setting up a group for broadcasting ................................................................................................105

Editing member information.............................................................................................................106

Deleting a member or group............................................................................................................106

Exporting the Address Book ............................................................................................................106

Importing to the Address Book ........................................................................................................108

PC-FAX receiving ..................................................................................................................................110

Enabling PC-FAX Receiving software on your machine .................................................................111

Running the PC-FAX Receiving software on your PC.....................................................................111

Setting up your PC ..........................................................................................................................112

Configuring the Network PC-FAX Receiving Settings .....................................................................113

Viewing new PC-FAX messages.....................................................................................................114

7 Firewall settings (For Network users) 115

Before using the Brother software .........................................................................................................115

Windows Windows Vista Windows

XP SP2/SP3 users.........................................................................................................115

users .....................................................................................................................117

7 users ...........................................................................................................................120

Page 6

Section III Apple Macintosh

8 Printing and Faxing 126

Features in the printer driver (Macintosh)..............................................................................................126

Duplex printing.......................................................................................................................................127

Guidelines for printing on both sides of the paper ...........................................................................127

Automatic duplex printing (Not available for DCP-7055, MFC-7360, MFC-7360N and

MFC-7362N)................................................................................................................................127

Manual duplex printing ....................................................................................................................127

Simultaneous scanning, printing and faxing ..........................................................................................128

Choosing page setup options..........................................................................................................128

Choosing printing options ................................................................................................................130

Cover Page......................................................................................................................................130

Layout..............................................................................................................................................131

Secure Print (For MFC-7470D, MFC-7460DN, MFC-7860DN and MFC-7860DW) ........................132

Print Settings ...................................................................................................................................133

Removing the Printer driver for Macintosh ............................................................................................138

Features in the BR-Script 3 printer driver (For MFC-7470D, MFC-7860DN and MFC-7860DW)

(PostScript

Choosing printing options ................................................................................................................139

Printer Features...............................................................................................................................140

Secure Print (Mac OS X 10.5.x to 10.6.x) .......................................................................................146

Status Monitor........................................................................................................................................147

Updating the machine’s status ........................................................................................................147

Hiding or showing the window .........................................................................................................148

Quitting the window .........................................................................................................................148

Web Based Management (Network Connection Only)....................................................................148

Sending a fax (MFC models only) .........................................................................................................149

Drag a vCard from the Mac OS X Address Book application (Mac OS X 10.4.11) .........................152

Using Mac OS X 10.5.x to 10.6.x Addresses panel.........................................................................153

3™ language emulation)................................................................................................139

9 Scanning 155

Scanning a document using the TWAIN driver......................................................................................155

Scanning an image into your Macintosh..........................................................................................156

Pre-Scanning an image...................................................................................................................156

Settings in the Scanner window ......................................................................................................157

Scanning a document using the ICA driver (Mac OS X 10.6.x).............................................................161

Using Image Capture.......................................................................................................................161

Scanning directly from the “Print & Fax” section .............................................................................165

Using Presto! PageManager..................................................................................................................168

Features ..........................................................................................................................................168

System requirements for Presto! PageManager .............................................................................168

NewSoft Technical Support .............................................................................................................169

Page 7

10 ControlCenter2 171

Using ControlCenter2 ............................................................................................................................171

Turning the AutoLoad feature off.....................................................................................................172

SCAN.....................................................................................................................................................173

File types .........................................................................................................................................174

Document Size ................................................................................................................................174

Image (example: Apple Preview).....................................................................................................175

OCR (word processing application).................................................................................................177

E-mail ..............................................................................................................................................178

File...................................................................................................................................................179

CUSTOM SCAN ....................................................................................................................................180

File types .........................................................................................................................................181

Document Size ................................................................................................................................181

User-defined button .........................................................................................................................181

Scan to Image .................................................................................................................................182

Scan to OCR ...................................................................................................................................183

Scan to E-mail .................................................................................................................................185

Scan to File......................................................................................................................................186

COPY / PC-FAX (MFC models only).....................................................................................................188

DEVICE SETTINGS ..............................................................................................................................190

Remote Setup (MFC models only) ..................................................................................................191

Quick-Dial (MFC models only).........................................................................................................192

Status Monitor .................................................................................................................................192

11 Remote Setup 193

Remote Setup (MFC models only) ........................................................................................................193

Page 8

Section IV Using The Scan key

12 Scanning (For USB cable users) 196

Using the Scan key................................................................................................................................196

Scan to E-mail .................................................................................................................................197

Scan to Image .................................................................................................................................198

Scan to OCR ...................................................................................................................................199

Scan to File......................................................................................................................................200

13 Network Scanning 201

Before using Network Scanning ............................................................................................................201

Network licence (Windows Configuring Network Scanning (Windows

Configuring Network Scanning (Macintosh) ....................................................................................205

Using the Scan key................................................................................................................................206

Scan to E-mail .................................................................................................................................206

Scan to E-mail (E-mail Server) (For MFC-7460DN, MFC-7860DN and MFC-7860DW) .................207

Scan to Image .................................................................................................................................208

Scan to OCR ...................................................................................................................................209

Scan to File......................................................................................................................................210

Scan to FTP (For MFC-7460DN, MFC-7860DN and MFC-7860DW) ............................................211

) ...........................................................................................................201

)....................................................................................202

A Index 215

vii

Page 9

Section I

Machine operation keys

Using the control panel 2

Page 10

Note

Using the control panel 1

Using printer keys 1

You can access the following features from your machine’s control panel.

Job Cancel 1

To cancel the current print job, press Job Cancel. You can clear the data that is left in the printer memory by pressing Job Cancel. To cancel multiple print jobs, hold down this key until the LCD shows Job Cancel (All).

Secure Key (For MFC-7460DN, MFC-7470D, MFC-7860DN and MFC-7860DW) 1

Secured data is password protected. Only those people who know the password will be able to print the secured data. The machine will not print secure data until the password is entered. After the document is printed, the data will be cleared from the memory. To use this function, you need to set your password in the printer driver dialog box. (See Secure Print on page 24, 38, 132, 140 and 146.) If you turn the power switch Off, the secured data saved in memory will be cleared.

a Press Secure.

If the LCD displays No Data Stored, there is no secured data in the memory.

b Press a or b to choose the user name. Press OK. The LCD displays the secured jobs list for that name. c Press a or b to choose the job. Press OK. Enter your four-digit password and press OK. d To print the data, press a or b to choose Print, press OK and then enter the number of copies you want.

Press OK. The machine prints the data. To delete the secured data, press a or b to choose Delete. Press OK.

Page 11

Using the control panel

Note

Printer Emulation Support (For MFC-7470D, MFC-7860DN and MFC-7860DW) 1

Your machine will receive print commands in a printer job language or emulation. Different operating systems and applications will send the print commands in different languages. Your machine can receive print commands in a variety of emulations and has an automatic emulation selection feature. When the machine receives data from the computer, it automatically chooses the emulation mode. The default setting is Auto.

Your machine has the following emulation modes. You can change the setting by using the control panel or a web browser.

 HP LaserJet Mode

The HP LaserJet mode (or HP mode) is the emulation mode in which this printer supports the PCL6 language of a Hewlett-Packard LaserJet laser printer. Many applications support this type of laser printer. Using this mode will allow your machine to run at its best with those applications.

 BR-Script 3 Mode

BR-Script is an original Brother page description language and a PostScript

interpreter. This machine supports PostScript to control text and graphics on the page.

For technical information about PostScript

• Adobe Systems Incorporated. PostScript Professional, 1999. ISBN: 0-201-37922-8

• Adobe Systems Incorporated. PostScript

1988. ISBN: 0-201-14396-8

• Adobe Systems Incorporated. PostScript Professional, 1985. ISBN: 0-201-10179-3

3™. The BR-Script interpreter of this machine allows you

commands, see the following manuals:

Language Reference, 3rd edition. Addison-Wesley

Language Program Design. Addison-Wesley Professional,

Language Tutorial and Cookbook. Addison-Wesley

language emulation

Setting the Emulation mode 1

a Press Menu. b Press a or b to choose Printer. Press OK. c Press a or b to choose Emulation. Press OK. d Press a or b to choose Auto, HP LaserJet or BR-Script 3. Press OK. e Press Stop/Exit.

We recommend that you set the emulation setting with your application software or network server. If the setting does not work properly, choose the required emulation mode manually using the control panel buttons of the machine.

Page 12

Using the control panel

Printing the Internal Font List (For MFC-7470D, MFC-7860DN and MFC-7860DW)1

You can print a list of the machine’s internal (or resident) fonts to see how each font looks before you choose it.

a Press Menu. b Press a or b to choose Printer. Press OK. c Press a or b to choose Print Options. Press OK. d Press a or b to choose Internal Font. Press OK. e Press a or b to choose HP LaserJet or BR-Script 3. Press OK. f Press Start. g Press Stop/Exit.

Printing the Print Configuration List (For MFC-7470D, MFC-7860DN and MFC-7860DW) 1

You can print a list of current printer settings.

a Press Menu. b Press a or b to choose Printer. Press OK. c Press a or b to choose Print Options. Press OK. d Press a or b to choose Configuration. Press OK. e (For MFC-7860DW) Press Start. The machine prints the settings. f Press Stop/Exit.

Page 13

Using the control panel

Note

Test Print (For MFC-7470D, MFC-7860DN and MFC-7860DW) 1

If you are having problems with print quality, you can do a test print.

a Press Menu. b Press a or b to choose Printer. Press OK. c Press a or b to choose Print Options. Press OK. d Press a or b to choose Test Print. Press OK. e (For MFC-7860DW) Press Start. f Press Stop/Exit.

If the problem appears on the printout, see Improving the print quality in the Basic User's Guide.

Duplex Print (For MFC-7470D, MFC-7860DN and MFC-7860DW) 1

You can choose whether you want to automatically print on both sides of the paper. The setting in the printer driver will take priority over the setting made on the control panel.

a Press Menu. b Press a or b to choose Printer. Press OK. c Press a or b to choose Duplex. Press OK. d Press a or b to choose Off, On(Long Edge) or On(Short Edge). Press OK. e Press Stop/Exit.

If the problem appears on the printout, see Improving the print quality in the Basic User's Guide.

Page 14

Using the control panel

Note

Restoring default printer settings (For MFC-7470D, MFC-7860DN and MFC-7860DW) 1

You can return the machine’s printer settings to the factory settings. This will not reset the network settings. To reset the machine’s network settings to the factory settings, please

see the Network User's Guide.

a Press Menu. b Press a or b to choose Printer. Press OK. c Press a or b to choose Reset Printer. Press OK. d To restore the default settings, press 1 (Reset). Press OK.

To exit without making a change, press 2 (Exit). Press OK.

e Press Stop/Exit.

If you want to reset the Fax memory, see the Reset functions of Machine Information in the Basic User's Guide.

If you want to reset the Printer memory, turn the power switch Off.

Page 15

Using the control panel

Using the scan keys 1

You can use (SCAN) on the control panel to scan documents into your word processing, graphics or E-mail applications or a folder on your computer.

See Section IV Using The Scan key for details.

Page 16

Section II

Windows

Printing 9 Scanning 42 ControlCenter4 63 Remote Setup (MFC models only) 93 Brother PC-FAX Software (MFC models only) 95 Firewall settings (For Network users) 115

Page 17

Note

Printing 2

• The screens in this section are from Windows®XP. Screens on your PC may vary depending on your operating system.

• If your PC is protected by a firewall, and you are unable to network print, network scan or PC Fax, you may

need to configure the firewall settings. If you are using the Windows

Firewall and you installed MFL-Pro

Suite from the CD-ROM, the necessary Firewall settings have already been made. If you did not install

from the CD-ROM, see Firewall settings (For Network users) on page 115 to configure your Windows Firewall. If you are using any other personal Firewall software, see the User’s Guide for your software or contact the software manufacturer.

Using the Brother printer driver 2

A printer driver is software that translates data from the format used by a PC into the format needed by a particular printer, using a printer command language or page description language.

The printer drivers are on the CD-ROM we have supplied. Install the drivers by following the steps in the Quick Setup Guide. The latest printer driver can also be downloaded from the Brother Solutions Center at:

http://solutions.brother.com/

Windows® Printing

The dedicated printer drivers for Microsoft Edition/XP Professional x64 Edition/Windows Server

Vista

/Windows Server®20081/Windows Server®2008 R21/Windows® 7 are available on the CD-ROM supplied with your Brother device. You can install them easily into your Windows program. The drivers support our unique compression mode to enhance printing speed in Windows

applications, and allows you to set various printer settings, including Toner Save Mode and custom paper size.

Windows Server® 2003/Windows Server® 2003 x64 Edition/Windows Server® 2008/Windows Server® 2008 R2 are available for network printing only. (Not available for DCP-7055, DCP-7060D, MFC-7360, MFC-7362N and MFC-7470D)

Windows®2000 Professional/XP Home Edition/XP Professional

20031/Windows Server®2003 x64 Edition1/Windows

system using our installer

Page 18

Printing

Note

Printing a document 2

When the machine receives data from your computer, it begins printing by picking up paper from the paper tray. The paper tray can feed many types of paper and envelopes. (See the Basic User's Guide for information about the Paper Tray and Recommended paper.)

a From your application, choose the Print command.

If any other printer drivers are installed on your computer, choose Brother MFC-XXXX* as your printer driver from the Print or Print Settings menu in your software application, and then click OK to begin printing. *(Where XXXX is your model name.)

(Macintosh) See Features in the printer driver (Macintosh) on page 126.

b Your computer sends the data to the machine. c When the machine finishes printing all the data, the LCD shows the machine status.

You can choose the paper size and orientation in your application software. If your application software does not support your custom paper size, choose the next largest paper size. Then adjust the print area by changing the right and left margins in your application software.

Page 19

Printing

Duplex printing 2

The supplied printer driver supports duplex printing.

Guidelines for printing on both sides of the paper 2

 If the paper is thin, it may wrinkle.  If paper is curled, turn over the stack, straighten it and then put it back in the paper tray or manual feed slot.  If the paper is not feeding properly, it may be curled. Remove the paper, straighten it and turn over the

stack.

 When you use the manual duplex function, it is possible that there may be paper jams or poor print quality.

If there is a paper jam, see Error and maintenance messages in the Basic User's Guide. If you have a print quality problem, see Improving the print quality in the Basic User's Guide.

Automatic duplex printing (Not available for DCP-7055, MFC-7360, MFC-7362N and MFC-7360N) 2

 Use A4 size paper when you use the automatic duplex printing function.  Make sure that the back cover is closed.  If paper is curled, straighten it and then put it back in the paper tray.  Use regular paper or thin paper. DO NOT use bond paper.

Manual duplex printing 2

The machine prints all the even-numbered pages on one side of the paper first. Then, the printer driver instructs you (with a pop-up message) to reinsert the paper. Before reinserting the paper, straighten it well, or you may get a paper jam. Very thin or thick paper is not recommended.

Page 20

Printing

Simultaneous scanning, printing and faxing 2

Your machine can print from your computer while sending or receiving a fax in memory, or while scanning a document into the computer. Fax sending will not be stopped during the computer printing. However, when the machine is copying or receiving a fax on paper, it pauses the computer printing operation, and then continues printing when copying or fax receiving has finished.

Page 21

Printing

Note

Printer driver settings 2

(Macintosh) See Printing and Faxing on page 126.

You can change the following printer settings when you print from your computer:

 Paper Size

 Orientation

 Copies

 Media Type

 Resolution

 Print Settings

 Multiple Page

 Duplex / Booklet

 Paper Source

 Scaling

 Reverse Print

 Use Watermark

 Header-Footer Print

 Toner Save Mode

 Secure Print

 Administrator

 User Authentication

 Macro

 Density Adjustment

 Improve Print Output

 Skip Blank Page

These settings are not available with the BR-Script 3 printer driver for Windows®.

Page 22

Printing

Accessing the printer driver settings 2

a (For Windows

Click Start, Settings and then Printers. (For Windows

Click Start, and then Printers and Faxes. (For Windows Vista

Click the button, Control Panel, Hardware and Sound, and then Printers.

(For Windows

Click the button, and then click Devices and Printers.

2000)

XP and Windows Server®)

)

b Right-click the Brother MFC-XXXX Printer icon (where XXXX is your model name) and select

Properties (Printer properties). The printer properties dialog box appears.

c Choose the General tab and then click Printing Preferences... (Preferences...).

Page 23

Printing

Note

Features in the Windows® printer driver 2

For more information, see the Help text in the printer driver.

• The screens in this section are from Windows®XP. The screens on your PC will vary depending on your operating system.

• To access the printer driver settings, see Accessing the printer driver settings on page 14.

Page 24

Printing

Basic tab 2

You can also change the Page Layout settings by clicking the illustration on the left side of the Basic tab.

(1)

(4)

(2)

(3)

a Choose the Paper Size, Orientation, Copies, Media Type, Resolution and Print Settings (1). b Choose Multiple Page and Duplex / Booklet (2). c Choose the Paper Source (3). d Confirm your current settings in the window (4). e Click OK to apply your chosen settings.

To return to the default settings, click Default, then OK.

Paper Size 2

From the drop-down box choose the Paper Size you are using.

Page 25

Printing

Note

Orientation 2

Orientation selects the position of how your document will be printed (Portrait or Landscape).

Portrait (Vertical) Landscape (Horizontal)

Copies 2

The copies selection sets the number of copies that will be printed.

 Collate

With the Collate check box selected, one complete copy of your document will be printed and then repeated for the number of copies you selected. If the Collate check box is not selected, then each page will be printed for all the copies selected before the next page of the document is printed.

Media Type 2

You can use the following types of media in your machine. For the best print quality, select the type of media that you wish to use.

Plain Paper Thin Paper Thick Paper Thicker Paper Bond Paper Envelopes

Env. Thick Env. Thin Recycled Paper Label

• When using ordinary plain paper (60 to 105 g/m2, 16 to 28 lb) choose Plain Paper. When using heavier weight paper or rough paper choose Thick Paper or Thicker Paper. For bond paper, choose Bond Paper.

• When you use envelopes, choose Envelopes. If the toner is not fixed to the envelope correctly when Envelopes has been selected, choose Env. Thick. If the envelope is crumpled when Envelopes has been selected, choose Env. Thin. For more information, see the Basic User's Guide.

Page 26

Printing

Resolution 2

You can choose the resolution as follows.

 300 dpi

 600 dpi

 HQ 1200

Print Settings 2

You can manually change the print setting.

 Graphics

This is the best mode for printing documents that contain graphics.

 Text

This is the best mode for printing text documents.

 Manual

You can change the settings manually by choosing Manual and clicking the Manual Settings... button. You can set brightness, contrast and other settings.

Multiple Page 2

The Multiple Page selection can reduce the image size of a page allowing multiple pages to be printed on one sheet of paper or enlarge the image size for printing one page on multiple sheets of paper.

 Page Order

When N in 1 option is selected, the page order can be selected from the drop-down list.

 Border Line

When printing multiple pages onto one sheet, with the Multiple Page feature, you can choose to have a solid border, dash border or no border around each page on the sheet.

 Print cut-out line

When 1 in NxN pages option is selected, the Print cut-out line option can be selected. This option allows you to print a faint cut-out line around the printable area.

Page 27

Printing

Duplex / Booklet 2

When you want to print a booklet or do duplex printing, use this function.

 None

Disable duplex printing.

 Duplex / Duplex (Manual)

When you want to do duplex printing, use these options.

• Duplex (Not available for DCP-7055, MFC-7360, MFC-7362N and MFC-7360N) The machine prints on both sides of the paper automatically.

• Duplex (Manual) The machine prints all the even numbered pages first. Then the printer driver will stop and show the

instructions required to re-insert the paper. When you click OK the odd numbered pages will be printed.

When you choose Duplex or Duplex (Manual), the Duplex Settings... button becomes available to choose. You can set the following settings in the Duplex Settings dialog box.

• Duplex Type There are four types of duplex binding directions available for each orientation.

• Binding Offset When you check Binding Offset, you can also specify the offset for binding in inches or millimetres.

 Booklet / Booklet (Manual)

Use this option to print a document in booklet format using duplex printing; it will arrange the document according to the correct page number and allows you to fold at the centre of the print output without having to change the order of the page number.

• Booklet (Not available for DCP-7055, MFC-7360, MFC-7362N and MFC-7360N) The machine prints on both sides of the paper automatically.

• Booklet (Manual) The machine prints all the even numbered sides first. Then the printer driver will stop and show the

instructions required to re-install the paper. When you click OK the odd numbered sides will be printed.

When you choose Booklet or Booklet (Manual), the Duplex Settings... button becomes available to choose. You can set the following settings in the Duplex Settings dialog box.

• Duplex Type There are two types of duplex binding directions available for each orientation.

• Booklet Printing Method When Divide into Sets is selected: This option allows you to print the whole booklet into smaller individual booklet sets, it still allows you

to fold at the centre of the smaller individual booklet sets without having to change the order of the page number. You can specify the number of sheets in each smaller booklet set, from 1 to 15. This option can help when folding the printed booklet that has a large number of pages.

Page 28

Printing

• Binding Offset When you check Binding Offset, you can also specify the offset for binding in inches or millimetres.

Paper Source 2

You can choose Auto Select, Tray1 or Manual and specify separate trays for printing the first page and for printing from the second page onwards.

Page 29

Printing

Advanced tab 2

(1)

(2) (3)

(4) (5) (6)

(7) (8)

(9)

Change the tab settings by clicking one of the following selections:

 Scaling (1)  Reverse Print (2)  Use Watermark (3)  Header-Footer Print (4)  Toner Save Mode (5)  Secure Print (6)  Administrator (7)  User Authentication (8)  Other Print Options (9)

Scaling 2

You can change the print image scaling.

Reverse Print 2

Check Reverse Print to reverse the data from up to down.

Page 30

Printing

Use Watermark 2

You can put a logo or text into your document as a watermark. You can choose one of the preset Watermarks, or you can use a bitmap file that you have created. Check Use Watermark and then click the Settings... button.

Watermark Settings 2

Transparent 2

Check Transparent to print the watermarked image in the background of your document. If this feature is not checked then the watermark will be printed on top of your document.

Page 31

Printing

In Outline Text 2

Check In Outline Text if you only want to print an outline of the watermark. It is available when you choose a text watermark.

Custom Settings 2

You can choose the watermark to be printed on the first page or on the other pages. Click the Add button to add the watermark settings and then choose Use Text or Use Bitmap File in

Watermark Style.

You can change the added watermark’s size and position on the page by selecting the watermark, and clicking the Settings button.

 Title

Enter a suitable title into the field.

 Text

Enter your Watermark Text into the Text box, and then choose the Font, Style, Size and Darkness.

 Bitmap

Enter the file name and location of your bitmap image in the File box, or click Browse... to search for the file. You can also set the scaling size of the image.

 Position

Use this setting if you want to control the position of the watermark on the page.

Page 32

Printing

Note

Header-Footer Print 2

When this feature is enabled, it will print the date and time on your document from your computer’s system clock and the PC login user name or the text you entered. By clicking Settings, you can customize the information.

 ID Print

If you select Login User Name, your PC login user name will print. If you select Custom and enter the text in the Custom edit box, the text you entered will print.

Toner Save Mode 2

You can conserve toner use with this feature. When you set Toner Save Mode to On, prints appears lighter. The default setting is Off.

• We do not recommend Toner Save for printing Photo or greyscale images.

• Toner Save Mode is not available for HQ 1200 resolution.

Secure Print (For MFC-7460DN, MFC-7470D, MFC-7860DN and MFC-7860DW) 2

Secure documents are documents that are password protected when they are sent to the machine. Only the people who know the password will be able to print them. Since the documents are secured at the machine, you must enter the password using the control panel of the machine to print them. The secured document must have a Password and Job Name.

To send a secured document:

a Click Settings... from Secure Print and check Secure Print. b Enter your password and click OK. c You must print the secured documents from the control panel of the machine. (See Secure Key (For

MFC-7460DN, MFC-7470D, MFC-7860DN and MFC-7860DW) on page 2.)

Printing multiple copies is not available when Secure Print is set to on.

To delete a secured document: You need to use the control panel of the machine to delete a secured document. (See Secure Key (For

MFC-7460DN, MFC-7470D, MFC-7860DN and MFC-7860DW) on page 2.)

Page 33

Printing

Note

Administrator 2

Administrators have the authority to limit access to functions such as scaling and watermark.

 Password

Enter the password into this box.

Click Set Password... to change the password.

 Copies Lock

Lock the copy pages selection to prevent multiple copy printing.

 Multiple Page & Scaling Lock

Lock the scaling setting and multiple page setting.

 Watermark Lock

Lock the current settings of the Watermark option to prevent changes being made.

 Header-Footer Print Lock

Lock the current settings of the Header-Footer Print option to prevent changes being made.

Page 34

Printing

Note

User Authentication (For MFC-7860DN and MFC-7860DW) 2

If you are restricted from PC Print by the Secure Function Lock 2.0 feature, you need to set your ID and PIN in the User Authentication Settings dialog. Click Settings of User Authentication and select Use ID Name/PIN.

If you want to enter your ID and PIN each time you print, select Enter ID Name/PIN for each print job. If you want to remember the ID Name/PIN, enter your ID and PIN. If your PC login name is registered to Secure Function Lock 2.0, you can select Use PC Login Name instead

of entering your ID and PIN. For more information about Secure Function Lock 2.0, see the Network User's Guide.

• When you use the machine through a network you can see the information of your ID such as the status of restricted features and the number of remaining pages you are allowed to print by clicking the Check Print Status. The Authentication result dialog will appear.

• When you use the machine through a network, you can make the Authentication result dialog appear each time you print by checking the Show print status before printing.

Other Print Options 2

You can set the following in Printer Function:

 Macro (For MFC-7470D, MFC-7860DN and MFC-7860DW)

 Density Adjustment

 Improve Print Output

 Skip Blank Page

Macro (For MFC-7470D, MFC-7860DN and MFC-7860DW) 2

You can save a page of a document as a macro to machine memory. You can also execute the saved macro (you can use the saved macro as an overlay on any documents). This will save time and increase printing speed for often used information such as forms, company logos, letterhead formats or invoices.

If the power switch is Off, all data will be deleted.

Density Adjustment 2

Increase or decrease the print density.

The Density Adjustment is not available when you set the Resolution to HQ 1200.

Page 35

Printing

Note

Improve Print Output 2

This feature allows you to improve a print quality problem.

 Reduce Paper Curl

If you choose this setting, the paper curl may be reduced. If you are printing only a few pages, you do not need to choose this setting. We recommend that you

change the printer driver setting in Media Type to a thin setting.

This operation will decrease the temperature of the machine's fusing process.

 Improve Toner Fixing

If you choose this setting, the toner fixing on paper may be improved. If this selection does not provide enough improvement, change the printer driver setting in Media Type to a thick setting.

This operation will increase the temperature of the machine's fusing process.

 Ghost Reduction Setting

If you are using the machine in a high humidity environment this setting may reduce ghosting on the paper. Do not use this setting if the humidity is below 30% or ghosting may increase.

This feature may not reduce ghosting for all types of paper. Before you buy a lot of paper, test a small quantity to make sure that the paper is suitable.

Skip Blank Page 2

If Skip Blank Page is checked, the printer driver automatically detects blank pages and excludes them from printing.

This option does not work when you choose the following options:

• Use Watermark

• Header-Footer Print

• N in 1 and 1 in NxN pages in Multiple Page

• Duplex (Manual), Booklet, Booklet (Manual) and Duplex with Binding Offset in Duplex / Booklet

Page 36

Printing

Print Profiles tab 2

(1)

(2)

(3) (4)

 Print Profiles (1)

The printer driver of the machine has preset print profiles. Select a desired profile and click OK to select the preset print settings.

 Edit a profile (2)

You can edit and save a new print profile.

 Restore default profiles (3)

Click to restore all the default print profiles.

 Always show Print Profiles tab first. (4)

When you want to always show the Print Profiles tab first, select this check box.

Page 37

Printing

Note

Editing a print profile 2

a Configure the print settings in the print driver. See Basic tab on page 16 and Advanced tab on page 21. b Click the Print Profiles tab. c Click the Edit a profile button.

(1)

(2)

d Choose the icon from the drop-down list (1) and enter a profile name (2).

e Choose the print profile you want to overwrite and click OK.

You can overwrite the preset print profiles.

Page 38

Printing

Support 2

Click Support... in the Printing Preferences dialog box.

(1)

(2)

(3)

(5) (6)

 Brother Solutions Center (1)

The Brother Solutions Center (http://solutions.brother.com/ Brother product including FAQs (Frequently Asked Questions), User’s Guides, driver updates and tips for using your machine.

) is a website offering information about your

(4) (7)

 Original Supplies Website (2)

You can visit our website for original/genuine Brother supplies by clicking this button.

Page 39

Printing

 Brother CreativeCenter (3)

You can visit our website for free and easy online solutions for business and home users by clicking this button.

 Print Settings (4)

This will print the pages that show how the internal settings of the machine have been configured.

 Check Setting (5)

You can check the current driver settings.

 About (6)

This will list the printer driver files and version information.

 Print Fonts (7) (For MFC-7470D, MFC-7860DN and MFC-7860DW)

This will print pages showing all the internal fonts of the machine.

Page 40

Printing

Note

Tray Settings 2

From the Start menu, select Printers and Faxes1. Right-click the Brother MFC-XXXX Printer icon (where XXXX is your model name) and select Properties to access the Tray Settings tab.

Select Settings and then Printers for Windows® 2000 users.

You can define the paper size for each paper tray and auto detect the serial number in the Tray Settings tab as follows.

(2)

(1)

 Paper Source Setting (1)

This feature identifies the paper size defined for each paper tray.

• Paper Size This setting allows you to define which paper size is used for the tray and manual feed slot. Highlight

the paper source you want to define and then choose the paper size from the drop-down list. Click Update to apply the setting to the tray.

• Default Source This setting allows you to choose the default paper source that your document will be printed from.

Choose the Default Source from the drop-down list and click Update to save your setting. The Auto Select setting will automatically pull paper from any paper source (tray or manual feed slot) that has a defined paper size that matches your document.

Page 41

Printing

Note

 Serial No. (2)

By clicking Auto Detect, the printer driver will query the machine and display its serial number. If it fails to receive the information, the screen will display "---------------".

The Auto Detect function is not available under the following machine conditions:

• The machine's power switch is Off.

• The machine is in an error mode.

• The machine is in a network shared environment.

• The cable is not connected to the machine correctly.

Page 42

Printing

Status Monitor 2

This reports the machine status (any errors that may happen with the machine) when printing. If you would like to turn the status monitor on, follow these steps:

Click the Start button, All Programs Status Monitor.

Programs for Windows® 2000 users

, Brother MFC-XXXX (where XXXX is your model name) and then

Page 43

Printing

Note

Features in the BR-Script 3 printer driver (For MFC-7470D, MFC-7460DN and MFC-7860DW) (PostScript

The screens in this section are from Windows®XP. The screens on your PC may vary depending on your operating system.

Printing Preferences 2

You can access the Printing Preferences dialog box by clicking Printing Preferences... in the General tab of the Brother MFC-XXXX BR-Script3 Properties dialog box.

 Layout tab

3™ language emulation) 2

You can change the layout setting by choosing the settings for Orientation, Print on Both Sides (Duplex), Page Order and Pages Per Sheet.

• Orientation Orientation selects the position of how your document will be printed. (Portrait, Landscape or Rotated Landscape)

• Print on Both Sides If you want to do duplex printing, choose Flip on Short Edge or Flip on Long Edge.

Page 44

Printing

• Page Order Specifies the order in which the pages of your document will be printed. Front to Back prints the

document so that page 1 is on top of the stack. Back to Front prints the document so that page 1 is on the bottom of the stack.

• Pages Per Sheet The Pages Per Sheet selection can reduce the image size of a page by allowing multiple pages to be

printed on one sheet of paper. Also, you can print a document in the booklet style automatically when you choose Booklet.

 Paper/Quality tab

Choose the Paper Source.

• Paper Source You can choose Automatically Select, Tray1 or Manual Feed.

Automatically Select

This setting will automatically pull paper from any paper source that has a paper size defined in the printer driver that matches your document.

Tray1

This setting will pull paper from Tray1.

Manual Feed

This setting will pull paper from the manual feed slot. The paper size should match the size defined in the printer driver.

Page 45

Printing

Advanced options 2

You can access the Advanced options by clicking the Advanced... button on the Layout tab or Paper/Quality tab.

(1)

(2)

a Choose the Paper Size and Copy Count (1).

 Paper Size

From the drop-down box choose the Paper Size you are using.

 Copy Count

The copy selection sets the number of copies that will be printed.

b Set the Print Quality, Scaling and TrueType Font settings (2).

 Print Quality

You can choose the following print quality settings.

• HQ 1200

• 600 dpi

• 300 dpi

 Scaling

Specifies whether to reduce or enlarge documents, and by what percentage.

 TrueType Font

Specifies the TrueType font options. Click Substitute with Device Font (the default) to use equivalent printer fonts for printing documents that contain TrueType fonts. This will permit faster printing; however, you might lose special characters not supported by the printer font. Click

Download as Softfont to download TrueType fonts for printing instead of using printer fonts.

Page 46

Printing

Note

c You can change settings by choosing a setting in the Printer Features list (3):

 Media Type

You can use the following types of media in your machine. For the best print quality, select the type of media that you wish to use.

Plain Paper Thin Paper Thick Paper Thicker Paper Bond Paper Envelopes

Env. Thick Env. Thin Recycled Paper Label

 Secure Print

 Password

Choose the password for your secured document that you send to the machine from the drop-down box.

 Job Name

Choose the Job name from the drop-down list for your secured document.

 Toner Save

You can conserve toner use with this feature. When you set Toner Save to On, print appears lighter. The default setting is Off.

• We do not recommend Toner Save for printing Photo or Greyscale images.

• Toner Save Mode is not available for HQ 1200 resolution.

Page 47

Printing

Note

 Halftone Screen Lock

Stops other applications from modifying the Halftone settings. The default setting is On.

 High Quality Image Printing

You can get high quality image printing. If you set High Quality Image Printing to On, the printing speed will be slower.

 Improve Print Output

This feature allows you to improve a print quality problem.

• Reduce Paper Curl If you choose this setting, the paper curl may be reduced. If you are printing only a few pages, you

do not need to choose this setting. We recommend that you change the printer driver setting in Media Type to a thin setting.

This operation will decrease the temperature of the machine's fusing process.

• Improve Toner Fixing If you choose this setting, the toner fixing on paper may be improved. If this selection does not

provide enough improvement, change the printer driver setting in Media Type to a thick setting.

This operation will increase the temperature of the machine's fusing process.

 Ghost Reduction Setting

If you are using the machine in a high humidity environment this setting may reduce ghosting on the paper. Do not use this setting if the humidity is below 30% or ghosting may increase.

This feature may not reduce ghosting for all types of paper. Before you buy a lot of paper, test a small quantity to make sure that the paper is suitable.

 Density Adjustment

Increase or decrease the print density.

The Density Adjustment is not available when you set the Resolution to HQ 1200.

Ports tab 2

If you want to change the port where your machine is connected or the path to the network machine you are using, choose or add the port you want to use.

Page 48

Printing

Note

Status Monitor 2

The Status Monitor utility is a configurable software tool for monitoring the status of one or more devices, allowing you to get immediate notification of error messages such as paper empty or paper jam.

You can check the device status at anytime by double-clicking the icon in the tasktray or by choosing Status

Monitor located in Start/All Programs/Brother/MFC-XXXX on your PC.

(For Windows®7)

If you have set the Enable Status Monitor on startup during installation, you will find the button or Status Monitor icon on the taskbar.To show the Status Monitor icon on your taskbar, click the button. The Status Monitor icon will appear in the small window. Then drag the icon to the taskbar.

There is also a link to the Troubleshooting and Brother Original Supplies website. Click the Visit the Original Supplies website button for more information on Brother original supplies.

• For more information about using the Status Monitor software, right-click the Status Monitor icon and choose Help.

• The automatic firmware update feature is active when the status monitor feature is active.

Page 49

Printing

Monitoring the machine’s status 2

The Status Monitor icon will change colour depending on the machine's status.

 A green icon indicates the normal stand-by condition.

 A yellow icon indicates a warning.

 A red icon indicates a printing error has occurred.

There are two locations where you can display the Status Monitor on your PC - in the tasktray or on the desktop.

Page 50

Note

The scanning operations and drivers will be different depending on your operating system. The machine uses a TWAIN compliant driver for scanning documents from your applications.

 (Windows

Scanning 3

XP/Windows Vista®/Windows®7)

Two scanner drivers are installed. A TWAIN compliant scanner driver (See Scanning a document using

the TWAIN driver on page 42) and a Windows document using the WIA driver (Windows

• For ScanSoft™ PaperPort™ 12SE, see Using ScanSoft™ PaperPort™ 12SE with OCR by NUANCE™* on page 59.

• If your PC is protected by a firewall and is unable to network scan, you may need to configure the firewall settings to allow communication through port number 54925 and 137. If you are using Windows

and you installed MFL-Pro Suite from the CD-ROM, the necessary Firewall settings have already been made. For more information, see Firewall settings (For Network users) on page 115.

Imaging Acquisition (WIA) driver (See Scanning a

XP/Windows Vista®/Windows®7) on page 49).

Firewall

Scanning a document using the TWAIN driver 3

The Brother MFL-Pro Suite software includes a TWAIN compliant scanner driver. TWAIN drivers meet the standard universal protocol for communicating between scanners and applications. This means that you can not only scan images directly into the PaperPort™ 12SE viewer that Brother included with your machine, but you can also scan images directly into hundreds of other software applications that support TWAIN scanning.

These applications include popular programs like Adobe

Photoshop®, CorelDRAW® and many more.

Scanning a document into the PC 3

There are two ways in which you can scan a whole page. You can either use the ADF (automatic document feeder) (Not available for DCP-7055 and DCP-7060D) or the scanner glass.

a Load your document. b Start the ScanSoft™ PaperPort™ 12SE software that was installed during the MFL-Pro Suite installation

to scan a document.

The instructions for scanning in this Guide are for when you use ScanSoft™ PaperPort™ 12SE. The scanning steps may vary when using other software applications.

c Click the Scan Settings button in the Desktop ribbon.

The Scan or Get Photo panel appears on the left side of the screen.

d Click the Select button.

Page 51

Scanning

Note

e Choose the scanner you are using from the Available Scanners list.

Choose TWAIN: TW-Brother MFC-XXXX or TWAIN: TW-Brother MFC-XXXX LAN.

f Check the Display scanner dialog box on the Scan or Get Photo panel. g Click Scan.

The Scanner Setup dialog box appears.

h Adjust the following settings, if needed, in the Scanner Setup dialog box:

 Scan (Image Type) (1)  Resolution (2)  Scan Type (3)  Reduce Noise (4)  Brightness (5)  Contrast (6)  Document Size (7)

i Click Start.

When scanning is finished, click Cancel to return to the PaperPort™ 12SE window.

After you select a document size, you can adjust the scanning area further by clicking the left mouse button and dragging it. This is required when you want to crop an image when scanning. (See Pre-Scanning to crop a portion you want to scan on page 44.)

Page 52

Scanning

Pre-Scanning to crop a portion you want to scan 3

You can preview your image and crop unwanted portions before scanning by using the PreScan button. When you are satisfied with the preview, click the Start button in the Scanner Setup dialog box to scan the

image.

a Follow the steps from a to g of Scanning a document into the PC on page 42. b Choose the settings for Scan (Image Type), Resolution, Scan Type, Brightness, Contrast and

Document Size, as needed.

c Click PreScan.

The whole image is scanned into the PC and appears in the Scanning Area (1) of the Scanner Setup dialog box.

Page 53

Scanning

Note

d Press and hold down the left mouse button and drag it over the portion you want to scan.

1 Scanning area

You can enlarge the image using the icon, and then use the icon to restore the image to its

original size.

e Load your document again.

Skip this step if you loaded the document on the scanner glass in step a.

f Click Start.

This time only the chosen area of the document appears in the PaperPort™ 12SE window (or your application window).

g In the PaperPort™ 12SE window, use the options available to refine the image.

Page 54

Scanning

Settings in the Scanner Setup dialog box 3

Scan (Image Type) 3

Choose the output image type from Photo, Web or Text. Resolution and Scan Type will be altered for each default setting.

The default settings are listed in the table below:

Scan (Image Type) Resolution Scan Type Photo Use for scanning photo images. 300 x 300 dpi 24bit Colour Web Use for attaching the scanned image to web pages. 100 x 100 dpi 24bit Colour Text Use for scanning text documents. 200 x 200 dpi Black & White

Resolution 3

You can choose a scanning resolution from the Resolution drop-down list. Higher resolutions take more memory and transfer time, but produce a finer scanned image. The following table shows the resolutions you can choose and the available colours.

Resolution Black & White/

Grey (Error Diffusion)

100 x 100 dpi Yes Yes Yes 150 x 150 dpi Yes Yes Yes 200 x 200 dpi Yes Yes Yes 300 x 300 dpi Yes Yes Yes 400 x 400 dpi Yes Yes Yes 600 x 600 dpi Yes Yes Yes 1200 x 1200 dpi Yes No Yes 2400 x 2400 dpi Yes No Yes 4800 x 4800 dpi Yes No Yes 9600 x 9600 dpi Yes No Yes 19200 x 19200 dpi Yes No Yes

256 Colour True Grey/24bit Colour

Scan Type 3

 Black & White

Use for text or line art.

 Grey (Error Diffusion)

Use for photographic images or graphics. (Error Diffusion is a method for creating simulated grey images without using true grey dots. Black dots are put in a specific pattern to give the appearance of grey.)

 True Grey

Use for photographic images or graphics. This mode is more exact because it uses up to 256 shades of grey.

Page 55

Scanning

Note

 256 Colour

Uses up to 256 colours to scan the image.

 24bit Colour

Uses up to 16.8 million colours to scan the image. Although using 24bit Colour creates an image with the most accurate colour, the image file will be about

three times larger than a file created with 256 Colour. It requires the most memory and has the longest transfer time.

Reduce Noise 3

You can improve and enhance the quality of your scanned images with this selection. The Reduce Noise setting is available when using 24bit Colour and scan resolutions of 300 × 300 dpi, 400 × 400 dpi or 600 × 600 dpi.

Brightness 3

Adjust the setting (-50 to 50) to get the best image. The default value is 0, representing an average. You can set the Brightness level by dragging the slider to the right or left to lighten or darken the image. You

can also enter a value in the box to set the level.

If the scanned image is too light, set a lower Brightness level and scan the document again. If the image is too dark, set a higher Brightness level and scan the document again.

The Brightness setting is not available when 256 Colour is chosen.

Contrast 3

You can increase or decrease the Contrast level by moving the slider to the left or right. An increase emphasizes dark and light areas of the image, while a decrease reveals more detail in grey areas. You can also enter a value in the box to set the Contrast.

The Contrast setting is only available when Grey (Error Diffusion), True Grey or 24bit Colour is chosen.

When scanning photographs or other images for use in a word processor or other graphics application, try different settings for the contrast and resolution to see which setting best suits your needs.

Document Size 3

Choose one of the following sizes:

 A4 210 x 297 mm (8.3 x 11.7 in)  JIS B5 182 x 257 mm (7.2 x 10.1 in)  Letter 215.9 x 279.4 mm (8 1/2 x 11 in)  Legal 215.9 x 355.6 mm (8 1/2 x 14 in)  A5 148 x 210 mm (5.8 x 8.3 in)

Page 56

Scanning

Note

 Executive 184.1 x 266.7 mm (7 1/4 x 10 1/2 in)  Business Card 90 x 60 mm (3.5 x 2.4 in)

To scan business cards, choose the Business Card size, and then place the business card face down at the top left of the scanner glass, as indicated by the document guidelines on the machine.

 Photo 10 x 15 cm (4 x 6 in)  Index Card 127 x 203.2 mm (5 x 8 in)  PhotoL89x127mm(3.5x5in)  Photo2L13x18cm(5x7in)  Postcard 1 100 x 148 mm (3.9 x 5.8 in)  Postcard 2 (Double) 148 x 200 mm (5.8 x 7.9 in)  Custom

If you choose Custom as the size, the Custom Document Size dialog box appears.

Enter the Custom Document Size Name, Width and Height for the document.

You can choose ‘mm’ or ‘inch’ as the unit for Width and Height.

• You can see the actual paper size you chose on the screen.

• Width: shows the width of scanning area.

• Height: shows the height of scanning area.

• Data Size: shows the rough data size in Bitmap format. The size will be different for other file formats such as JPEG.

• User adjustable from 8.9 x 8.9 mm to 215.9 x 355.6 mm.

Page 57

Scanning

Note

Scanning a document using the WIA driver (Windows®XP/Windows Vista®/Windows®7) 3

WIA compliant 3

For Windows®XP/Windows Vista®/Windows®7 you can choose Windows® Image Acquisition (WIA) for scanning images from the machine. You can scan images directly into the PaperPort™ 12SE viewer that Brother included with your machine or you can scan images directly into any other application that supports WIA or TWAIN scanning.

Scanning a document into the PC 3

There are two ways in which you can scan a whole page. You can either use the ADF (automatic document feeder) (Not available for DCP-7055 and DCP-7060D) or the scanner glass.

If you want to scan and then crop a portion of a page after pre-scanning the document, you need to use the scanner glass. (See Pre-Scanning and cropping a portion using the scanner glass on page 51.)

a Load your document. b Start the ScanSoft™ PaperPort™ 12SE software that was installed during the MFL-Pro Suite installation

to scan a document.

The instructions for scanning in this Guide are for when you use ScanSoft™ PaperPort™ 12SE. The scanning steps may vary when using other software applications.

c Click the Scan Settings button in the Desktop ribbon.

The Scan or Get Photo panel appears on the left side of the screen.

d Click Select button. e Choose the scanner you are using from the Available Scanners list.

Choose WIA: Brother MFC-XXXX or WIA: Brother MFC-XXXX LAN.

f Check the Display scanner dialog box on the Scan or Get Photo panel. g Click Scan.

The Scanner Setup dialog box appears.

h Adjust the following settings, if needed, in the Scanner Setup dialog box:

 Paper source (1)  Picture type (2)  Adjust the quality of the scanned picture (3)

Page 58

Scanning

Note

 Page size (4)

i Choose Document Feeder from the Paper source drop-down list (1).

j Choose the picture type (2). k Choose the Page size from the drop-down list (4). l If you need advanced settings, click Adjust the quality of the scanned picture (3). You can choose

Brightness, Contrast, Resolution (DPI) and Picture type from Advanced Properties. Click OK after you choose a setting.

• The scanner resolution can be set as high as 1200 dpi.

• For resolutions greater than 1200 dpi, use the Scanner Utility. (See Scanner Utility on page 53.)

m Click the Scan button in the Scan dialog box.

The machine starts scanning the document.

Page 59

Scanning

Pre-Scanning and cropping a portion using the scanner glass 3

The Preview button is used to preview an image for cropping any unwanted portions from the image. When you are satisfied with the preview, click the Scan button in the Scan dialog box to scan the image.

a Follow the steps from a to g of Scanning a document into the PC on page 49. b Choose Flatbed in the Paper source drop-down list (1).

 Paper source (1)  Picture type (2)  Adjust the quality of the scanned picture (3)  Scanning area (4)

c Choose the picture type (2). d Click Preview.

The whole image is scanned into the PC and appears in the scanning area (4).

Page 60

Scanning

e Press and hold down the left mouse button and drag it over the portion you want to scan.

f If you need advanced settings, click Adjust the quality of the scanned picture (3). You can choose

Brightness, Contrast, Resolution (DPI) and Picture type from Advanced Properties. Click OK after you choose a setting.

g Click the Scan button in the Scan dialog box.

The machine starts scanning the document. This time only the chosen area of the document appears in the PaperPort™ 12SE window (or your application window).

Page 61

Scanning

Note

Scanner Utility 3

The Scanner Utility is used for configuring the WIA scanner driver for resolutions greater than 1200 dpi and for changing the paper size (Windows

utility to change the setting. You must restart your PC for the new settings to take effect.

 Running the utility

XP only). If you want to set Legal size as the default size, use this

You can run the utility by choosing the Scanner Utility located in the Start/All

Programs/Brother/MFC-XXXX (where XXXX is your model name)/ Scanner Settings/Scanner Utility.

If you scan the document at a resolution greater than 1200 dpi, the file size may be very large. Make sure that you have enough memory and hard disk space for the size of the file you are trying to scan. If you do not have enough memory or hard disk space then your PC may freeze and you could lose your file.

Page 62

Scanning

Note

(Windows Vista® and Windows®7) The User Account Control screen appears, do the following.

• (Windows Vista

(Windows

) For users who have administrator rights: Click Allow.

7) For users who have administrator rights: Click Yes.

• (Windows Vista®) For users who do not have administrator rights: Enter the administrator password and click OK.

(Windows

7) For users who do not have administrator rights: Enter the administrator password and

click Yes.

Page 63

Scanning

Scanning a document using the WIA driver (Windows Photo Gallery and Windows Fax and Scan) 3

Scanning a document into the PC 3

There are two ways in which you can scan a whole page. You can either use the ADF (automatic document feeder) (Not available for DCP-7055 and DCP-7060D) or the scanner glass.

If you want to scan and then crop a portion of a page after pre-scanning the document, you need to use the scanner glass. (See Pre-Scanning and cropping a portion using the scanner glass on page 57.)

a Load your document. b Open your software application to scan the document. c Do one of the following:

 (Windows Photo Gallery)

Click File, then Import from Camera or Scanner.

 (Windows Fax and Scan)

Click File, New, then Scan.

d Choose the scanner you want to use. e Click Import.

The Scan dialog box appears.

Page 64

Scanning

f Adjust the following settings, if needed, in the Scanner dialog box.

 Profile (1)  Source (2)  Paper size (3)  Color format (4)  File type (5)  Resolution (DPI) (6)  Brightness (7)  Contrast (8)

4 5

g Click the Scan button in the Scan dialog box.

The machine starts scanning the document.

Page 65

Scanning

Pre-Scanning and cropping a portion using the scanner glass 3

a Follow the steps from a to e of Scanning a document into the PC on page 55. b Put the document face down on the scanner glass. c Choose Flatbed in the Source drop-down list. Adjust the following settings, if needed, in the Scanner

dialog box.

 Profile (1)  Source (2)  Color format (3)  File type (4)  Resolution (DPI) (5)  Brightness (6)  Contrast (7)  Scanning area (8)

(1)

(2)

(3)

(4)

(5)

(6)

(7)

d Click Preview.

The whole image is scanned into the PC and appears in the scanning area (8).

(8)

Page 66

Scanning

e Press and hold down the left mouse button and drag it over the portion you want to scan.

f Click the Scan button in the Scan dialog box.

The machine starts scanning the document. This time only the chosen area of the document appears in your application window.

Page 67

Scanning

Note

Using ScanSoft™ PaperPort™ 12SE with OCR by NUANCE™*3

* Not available for any restricted countries subject to any applicable export control status

• ScanSoft™ PaperPort™ 12SE supports Windows® XP (SP3 or greater), Windows® XP Professional x64

Edition (SP2 or greater), Windows Vista

• For Windows

2000 (SP4 or higher) users, you can download ScanSoft™ PaperPort™ 11SE by

Nuance™ during the installation of MFL-Pro Suite. See the Quick Setup Guide.

ScanSoft™ PaperPort™ 12SE for Brother is a document management application. You can use PaperPort™ 12SE to view scanned documents.

PaperPort™ 12SE has a sophisticated, yet easy-to-use filing system that will help you organize your graphics and text documents. It allows you to mix or ‘stack’ documents of different formats for printing, faxing or filing.

This chapter only introduces the basic functions of the software. For more details, see the ScanSoft™ Getting Started Guide. To view the complete ScanSoft™ PaperPort™ 12SE Getting Started Guide, choose the Help ribbon and click Getting Started Guide. When you install MFL-Pro Suite, ScanSoft™ PaperPort™ 12SE for Brother is installed automatically. You can access ScanSoft™ PaperPort™ 12SE through the ScanSoft™ PaperPort™ SE program group located in Start/All Programs/Nuance PaperPort 12 on your PC.

(SP2 or greater) and Windows®7 only.

Viewing items 3

ScanSoft™ PaperPort™ 12SE gives several ways to view items: Desktop displays the item in the chosen folder with a thumbnail (a small graphic that shows each item in a

desktop or folder) or an icon. You can see both PaperPort™ 12SE items (MAX files) and non-PaperPort™ 12SE items (files created using

other applications). All graphical files (PaperPort™ 12SE's *.max and other files) will be displayed and include an icon that

indicates the application that the specific file type is associated or created with. Non-graphical files are indicated by a small rectangular thumbnail and are not displayed as actual images.

Image View displays a close-up of a single page. You can open a PaperPort™ 12SE item by clicking the Open with Image View button on the Desktop ribbon.

Page 68

Scanning

As long as you have the appropriate application on your PC to display it, you can also open a non-PaperPort™ SE item by double-clicking it.

Organizing your items in folders 3

PaperPort™ 12SE has an easy-to-use filing system for organizing your items. The filing system consists of folders and items that you choose to view in Desktop. An item can be a PaperPort™ 12SE item or a non-PaperPort™ 12SE item:

 Folders are arranged in a ‘tree’ structure in the Folder View. You use this section to choose folders and

view their items in Desktop.

 You can simply drag and drop an item onto a folder. When the folder is highlighted, release the mouse

button and the item is stored in that folder.

 Folders can be ‘nested’—that is, stored in other folders.  When you double-click a folder, its contents (both PaperPort™ 12SE MAX files and non PaperPort™

12SE files) appear in Desktop.

 You can also use Windows

Explorer to manage the folders and items shown in Desktop.

Quick links to other applications 3

ScanSoft™ PaperPort™ 12SE automatically recognizes many other applications on your PC and creates a ‘working link’ to them.

The bar at the bottom of the PaperPort™ 12SE desktop shows which programs you can use with PaperPort™ 12SE.

To send an item from PaperPort™ 12SE to another program, simply drag and drop the item from the PaperPort™ 12SE desktop to the program icon on the Send To bar. PaperPort™ 12SE automatically converts the item to the preferred format.

If PaperPort™ 12SE does not automatically recognize one of the applications on your PC, you can manually create a link using the New Link button on the Tools ribbon.

Page 69

Scanning

ScanSoft™ PaperPort™ 12SE with OCR lets you convert image text into text you can edit 3

ScanSoft™ PaperPort™ 12SE can quickly convert a text document image into text that you can edit with a word processing application.

PaperPort™ 12SE uses the optical character recognition software (OCR), which comes with PaperPort™ 12SE. PaperPort™ 12SE can use your preferred OCR application if it is already on your PC. You can convert the entire item, or by using the Copy Text button on the Item ribbon, you can choose only a portion of the text to convert.

Dragging an item onto a word-processing link icon starts PaperPort™ 12SE’s built-in OCR application, or you can use your own OCR application.

Importing items from other applications 3

As well as scanning items, you can bring items into PaperPort™ 12SE in a variety of ways and convert them to PaperPort™ 12SE (MAX) files in several different ways:

 Print to the Desktop from another application, such as Microsoft

 Import files saved in other file formats, such as Windows

(TIFF).

Bitmap (BMP) or Tagged Image File Format

Word.

Exporting items into other formats 3

You can export or save PaperPort™ 12SE items in several popular file formats, such as BMP, JPEG, TIFF or PDF.

Exporting an image file 3

a Click Save As on the PaperPort button.

The Save ‘XXXXX’ as dialog box is displayed.

b Choose the drive and folder where you want to store the file. c Enter the new file name and choose the file type. d Click Save to save your file, or Cancel to return to PaperPort™ 12SE without saving it.

Page 70

Scanning

Uninstalling ScanSoft™ PaperPort™ 12SE with OCR 3

(Windows®XP) 3

a Click the Start button, Control Panel, Add or Remove Programs, and click the Change or Remove

Programs icon.

b Choose Nuance PaperPort 12 from the list and click Change or Remove.

(Windows Vista® and Windows®7) 3

a Click the button, Control Panel, Programs and Programs and Features.

b Choose Nuance PaperPort 12 from the list and click Uninstall.

Page 71

ControlCenter4 4

Overview 4

ControlCenter4 is a software utility that lets you quickly and easily access your often used applications. Using ControlCenter4 eliminates the need to manually launch specific applications.

ControlCenter4 has two user interfaces: Home Mode and Advanced Mode.

 Home Mode

The Home Mode gives you easy access to your machine’s main functions. See Using ControlCenter4 in Home Mode on page 64.

 Advanced Mode

The Advanced Mode gives you more control over the details of your machine’s functions. You can add up to three customized tabs in your original settings. See Using ControlCenter4 in Advanced Mode on page 78.

Changing the user interface 4

a Click Configuration and then select Mode Select. b Select Home Mode or Advanced Mode in the mode dialog.

Page 72

ControlCenter4

Using ControlCenter4 in Home Mode 4

This section briefly introduces the ControlCenter4 functions in Home Mode. For more details on each function, click Help.

1 Scan directly to a file, E-mail, word processor or graphics application of your choice. 2 Access the PC-FAX applications available for your device. 3 Access the settings available to configure your device. 4 Link to Brother Solutions Center, Brother CreativeCenter and the Help file. 5 You can select which machine ControlCenter4 will connect with from the Model drop-down list. 6 You can change the user interface and ControlCenter4 preferences. 7 Access the Help file. 8 Access Status Monitor by clicking the Device Status button.

Page 73

ControlCenter4

ControlCenter4 Features for Home Mode users 4

Scan (See Scan tab on page 66.)

 See Saving the scanned image on page 68.  See Printing the scanned image on page 68.  See Opening the scanned image in an application on page 69.  See Attaching the scanned data to E-mail on page 69.  See Using the OCR feature on page 70.

PC-FAX (See PC-FAX tab (MFC models only) on page 71.)

 See Sending a scanned image on page 72.  See Sending an image file from your computer on page 72.  See Viewing and printing received PC-FAX data on page 73.

Device Settings (See Device Settings tab on page 74.)

 See Configuring Remote Setup on page 74.  See Accessing Quick Dial on page 75.  See Configuring Scan button settings on page 75.  See Launching the BRAdmin utility on page 76.

Support (See Support tab on page 77.)

 See Opening ControlCenter Help on page 77.  See Using Brother Solutions Center on page 77.  See Accessing the Brother CreativeCenter on page 77.

Page 74

ControlCenter4

Scan tab 4

There are five scan options: Save, Print, Open with an Application, Send E-mail and OCR. This section briefly introduces the Scan tab function. For more details of each function, click Help.

1 PC Scan setting area 2 Image viewer 3 Save button 4 Print button 5 Open with an Application button 6 Send E-mail button 7 OCR button

Page 75

ControlCenter4

Note

File types 4

You can choose from the following list of file types when saving to a folder.

 Windows Bitmap (*.bmp)

 JPEG (*.jpg)

 TIFF (*.tif)

 TIFF Multi-Page (*.tif)

 Portable Network Graphics (*.png)

 PDF (*.pdf)

 Secure PDF (*.pdf)

 XML Paper Specification (*.xps)

• The XML Paper Specification is available for Windows Vista®/Windows® 7 or when using applications which support XML Paper Specification files.

• If you set the file type to TIFF or TIFF Multi-Page, you can choose “Uncompressed” or “Compressed”.

• Secure PDF is available for the Save and Send E-mail selections.

Page 76

ControlCenter4

Document Size 4

You can choose the document size from the pull-down list. If you choose a “1 to 2” document size, such as

1 to 2 (A4), the scanned image will be divided into two A5 size documents.

Saving the scanned image 4

The Save button lets you scan an image to a folder on your hard disk in one of the file types shown in the file attachment list.

a Configure the settings in the PC Scan setting area. b Click the Scan button. c Confirm and edit (if necessary) the scanned image in the image viewer. d Click Save. e The Save dialog will appear. Select your Destination Folder and other settings. Click OK. f The image will be saved in your chosen folder.

Printing the scanned image 4

You can scan a page on the machine and print copies using any of the features of ControlCenter4 supported by your Brother machine’s printer driver.

a Select the Scan tab. b Configure the settings in the PC Scan setting area. c Click the Scan button. d Confirm and edit (if necessary) the scanned image in the image viewer. e Click Print. f Configure the print settings and then click Start Printing.

Page 77

ControlCenter4

Opening the scanned image in an application 4

The Open with an Application button lets you scan an image directly into your graphics application for image editing.

a Select the Scan tab. b Configure the settings in the PC Scan setting area. c Click the Scan button. d Confirm and edit (if necessary) the scanned image in the image viewer. e Click Open with an Application. f Select the application from the drop-down list and click OK. g The image will appear in the application you have chosen.

Attaching the scanned data to E-mail 4

The Send E-mail button lets you scan a document to your default E-mail application, so you can send the scanned job as an attachment.

a Select the Scan tab. b Configure the settings in the PC Scan setting area. c Click the Scan button. d Confirm and edit (if necessary) the scanned image in the image viewer. e Click Send E-mail. f Configure the attached file settings and click OK. g Your default E-mail application will open and the image will be attached to a new, blank email.

Page 78

ControlCenter4

Using the OCR feature 4

The OCR button lets you scan a document and convert it into text. This text can be edited using your favourite word processing software.

a Select the Scan tab. b Configure the settings in the PC Scan setting area. c Click the Scan button. d Confirm and edit (if necessary) the scanned image in the image viewer. e Click OCR. f Configure the OCR settings and click OK. g Your default word processing application will open and display the converted text data.

Page 79

ControlCenter4

Note

PC-FAX tab (MFC models only) 4

This section briefly introduces the PC-FAX tab function. For more details of each function, click Help.

The PC-FAX software can only send Black & White fax documents in A4 size.

1 Send Image File button 2 Send Scanned Image button 3 Received PC-FAX button 4 PC Scan setting area 5 Scan Image area 6 Send button

Page 80

ControlCenter4

Sending an image file from your computer 4

The Send Image File button lets you send an image file as a fax from your computer using the Brother PC-FAX software.

a Select the PC-FAX tab. b Click Send Image File. c Click on the folder tree to browse for the folder where the image you want to send is located. Then select

the file you want to send.

d Click the Send button. e The PC-FAX sending dialog will appear. Enter a fax number and then click Start.

Sending a scanned image 4

The Send Scanned Image button lets you scan a page or document and automatically send the image as a fax from your computer using the Brother PC-FAX software.

a Select the PC-FAX tab. b Click Send Scanned Image. c Configure the settings in the PC Scan setting area. d Click the Scan button. e Confirm and edit (if necessary) the scanned image in the image viewer. f Click Send. g The PC-FAX sending dialog will appear. Enter a fax number and then click Start.

Page 81

ControlCenter4

Viewing and printing received PC-FAX data 4

The Received PC-FAX button lets you view and print received fax data using the Brother PC-FAX software. Before you use the PC-FAX Receive function, you must select the PC-FAX Receive option from the control panel menu of the Brother machine. (See Enabling PC-FAX Receiving software on your machine on page 111.)

a Select the PC-FAX tab. b Click Received PC-FAX. c The PC-FAX receiving function activates and starts to receive fax data from your machine. The received

data will appear. To view the data, click View.

d If you want to print the received data, select the data and then click Print. e Configure the print settings and then click Start Printing.

Page 82

ControlCenter4

Device Settings tab 4

This section briefly introduces the Device Settings tab function. For more details of each function, click Help.

1 Remote Setup button 2 Quick-Dial button 3 Device Scan Settings button 4 BRAdmin button

Configuring Remote Setup 4

The Remote Setup button lets you open the Remote Setup Program window to configure most machine and network setting menus.

a Select the Device Settings tab. b Click Remote Setup. c The Remote Setup Program window will appear. For Remote Setup configuration, see Remote Setup

on page 93.

Page 83

ControlCenter4

Accessing Quick Dial 4

The Quick-Dial button lets you open the Address Book window in the Remote Setup Program. You can then easily register or change the Quick Dial numbers from your PC.

a Select the Device Settings tab. b Click Quick-Dial. c The Address Book window will appear. For Address Book configuration, see Remote Setup (MFC

models only) on page 93.

Configuring Scan button settings 4

The Device Scan Settings button lets you configure your machine’s Scan key settings.

a Select the Device Settings tab. b Click Device Scan Settings. c The Device Scan Settings dialog will appear. You can change settings of each Scan button function. d Click OK.

Page 84

ControlCenter4

Note

Launching the BRAdmin utility 4

If you have installed BRAdmin Light or BRAdmin Professional 3, the BRAdmin button lets you open the BRAdmin Light or BRAdmin Professional 3 utility.

The BRAdmin Light utility is designed for initial setup of the Brother network connected devices. It can also search for Brother products in a TCP/IP environment, view the status and configure basic network settings, such as the IP address. To install BRAdmin Light from the installation CD-ROM, see the Network User's Guide. If you require more advanced machine management, use the latest version of BRAdmin Professional 3 utility that is available as a download from http://solutions.brother.com/

a Select the Device Settings tab. b Click BRAdmin. The BRAdmin Light or BRAdmin Professional 3 utility dialog appears.

If you have installed both BRAdmin Light and BRAdmin Professional, ControlCenter 4 will launch BRAdmin Professional 3.

Page 85

ControlCenter4

Support tab 4

This section briefly introduces the Support tab function. For more details of each function, click the Help button in ControlCenter4.

Opening ControlCenter Help 4

The ControlCenter Help lets you open the Help file for detailed information about ControlCenter.

a Select the Support tab. b Click ControlCenter Help. c The ControlCenter Help top page will appear.

Using Brother Solutions Center 4

The Brother Solutions Center button lets you open the Brother Solutions Center website offering information about your Brother product including FAQs (Frequently Asked Questions), User’s Guides, driver updates and tips for using your machine.

a Select the Support tab. b Click Brother Solutions Center. c The Brother Solutions Center website will be shown in your web browser.

Accessing the Brother CreativeCenter 4

The Brother CreativeCenter button lets you access our website for free and easy online solutions for business and home users.

a Select the Support tab. b Click Brother CreativeCenter. ControlCenter 4 will launch your web browser and then open the Brother

CreativeCenter website.

Page 86

ControlCenter4

Using ControlCenter4 in Advanced Mode 4

This section briefly introduces the ControlCenter4 functions in Advanced Mode. For more details on each function, click Help.

1 Scan directly to a file, E-mail, word processor or graphics application of your choice. 2 Access the PC-Copy feature available via your PC. 3 Access the PC-FAX applications available for your device. 4 Access the settings available to configure your device. 5 Link to Brother Solutions Center, Brother CreativeCenter and the Help file. 6 You can configure your original settings tab by right clicking the tab area. 7 You can select which machine ControlCenter4 will connect with from the Model drop-down list. 8 You can open the configuration window for each scan function and change the user interface mode. 9 Access the Help file. 10 Access Status Monitor by clicking the Device Status button.

Page 87

ControlCenter4

ControlCenter4 Features for Advanced Mode users 4

Scan (See Scan tab on page 80.)

 See Opening the scanned image in an application on page 82.  See Using the OCR feature on page 82.  See Attaching the scanned data to E-mail on page 82.  See Saving the scanned image on page 83.

PC-Copy (See PC-Copy tab on page 84.)

 See Printing the scanned image on page 84.

PC-FAX (See PC-FAX tab (MFC models only) on page 85.)

 See Sending an image file from your computer on page 85.  See Sending a scanned image on page 85.  See Viewing and printing received PC-FAX data on page 86.

Device Settings (See Device Settings tab on page 87.)

 See Configuring Remote Setup on page 87.  See Accessing Quick Dial on page 87.  See Configuring Scan button settings on page 88.  See Launching the BRAdmin utility on page 89.

Support (See Support tab on page 90.)

 See Using Brother Solutions Center on page 90.  See Opening ControlCenter Help on page 90.  See Accessing the Brother CreativeCenter on page 90.

Custom (See Custom tab on page 91.)

 See Creating a Custom tab on page 91.

Page 88

ControlCenter4

Note

Scan tab 4

There are four scan options: Image, OCR, E-mail and File. This section briefly introduces the Scan tab function. For more details of each function, click Help.

1 PC Scan setting area 2 Image button 3 OCR button 4 E-mail button 5 File button

• You can change the default settings of each button by right-clicking the appropriate button or clicking Configuration. When the configuration dialog appears, you can change the settings and then click OK.

• To preview and configure the scanned image, check Pre Scan on configuration dialog.

Page 89

ControlCenter4

Note

File types 4

You can choose from the following example file types when saving to a folder. (For Image, E-mail and File scan)

 Windows Bitmap (*.bmp)

 JPEG (*.jpg)

 TIFF (*.tif)

 TIFF Multi-Page (*.tif)

 Portable Network Graphics (*.png)

 PDF (*.pdf)

 Secure PDF (*.pdf)

 XML Paper Specification (*.xps)

(For OCR scan)

 Text (*.txt)

 HTML 3.2 (*.htm)

 HTML 4.0 (*.htm)

 WordPad (*.rtf)

 RTF Word 97(*.rtf)

 RTF Word 2000(*.rtf)

 Word Perfect 8(*.wpd)

 Word Perfect 9,10(*.wpd)

 Microsoft Excel 97(*.xls)

 Microsoft Excel 2003,XP(*.xls)

• The XML Paper Specification is available for Windows Vista®/Windows® 7 or when using applications which support XML Paper Specification files.

• If you set the file type to TIFF or TIFF Multi-Page, you can choose “Uncompressed” or “Compressed”.

• Secure PDF is available for Scan to Image, Scan to E-mail and Scan to File.

Document Size 4

You can choose the document size from the pull-down list. If you choose a “1 to 2” document size, such as

1 to 2 (A4), the scanned image will be divided into two A5 size documents.

Page 90

ControlCenter4

Opening the scanned image in an application 4

The Image button lets you scan an image directly into your graphics application for image editing.

a Select the Scan tab. b If you want to change the scan settings, right-click the Image button and then change settings. If you

want to preview and configure the scanned image, check Pre Scan. Click OK.

c Click Image. d The image will appear in the application you have chosen.

Using the OCR feature 4

The OCR button lets you scan a document and convert it into text. This text can be edited using your favourite word processing software.

a Select the Scan tab. b If you want to change the scan settings, right-click the OCR button and then change settings. If you want

to preview and configure the scanned image, check Pre Scan. Click OK.

c Click OCR. d Your default word processing application will open and display the converted text data.

Attaching the scanned data to E-mail 4

The E-mail button lets you scan a document to your default E-mail application, so you can send the scanned job as an attachment.

a Select the Scan tab. b If you want to change the scan settings, right-click the E-mail button and then change settings. If you

want to preview and configure the scanned image, check Pre Scan. Click OK.

c Click E-mail. d Your default E-mail application will open and the image will be attached to a new, blank email.

Page 91

ControlCenter4

Saving the scanned image 4

The File button lets you scan an image to a folder on your hard disk in one of the file types shown in the file attachment list.

a Select the Scan tab. b If you want to change the scan settings, right-click the File button and then change settings. If you want

to preview and configure the scanned image, check Pre Scan. Click OK.

c Click File. d The image will be saved in the folder you have chosen.

Page 92

ControlCenter4

PC-Copy tab 4

Printing the scanned image 4

You can scan a page on the machine and print copies using any of the features of ControlCenter4 supported by your Brother machine’s printer driver.

a Select the PC-Copy tab. b If you want to change the scan settings, right-click the button you want to change and then change the

settings. If you want to preview and configure the scanned image, check Pre Scan. Click OK.

c Click Monochrome Copy, 2 in 1 Copy or 4 in 1 Copy.

You can customize each button with your original settings.

d The scanned image will be printed.

Page 93

ControlCenter4

Note

PC-FAX tab (MFC models only) 4

This section briefly introduces the PC-FAX tab function. For more details of each function, click Help.

The PC-FAX software can only send Black & White fax documents in A4 size.

Sending an image file from your computer 4

The Send Image File button lets you send an image file as a fax from your computer using the Brother PC-FAX software.

a Select the PC-FAX tab. b Click Send Image File. c Click on the folder tree to browse for the folder where the image you want to send is located. Then select

the file you want to send.

d Click the Send button. e The PC-FAX sending dialog will appear. Enter a fax number and then click Start.

Sending a scanned image 4

The Send Scanned Image button lets you scan a page or document and automatically send the image as a fax from your computer using the Brother PC-FAX software.

a Select the PC-FAX tab. b If you want to change the scan settings, right-click Send Scanned Image and then change settings. If

you want to preview and configure the scanned image, check Pre Scan. Click OK.

c Click Send Scanned Image. d The PC-FAX sending dialog will appear. Enter a fax number and then click Start.

Page 94

ControlCenter4

Viewing and printing received PC-FAX data 4

a Select the PC-FAX tab. b Click Received PC-FAX. c The PC-FAX receiving function activates and starts to receive fax data from your machine. The received

data will appear. To view the data, click View.

d If you want to print the received data, select the data and then click Print. e Configure the print settings and then click Start Printing.

Page 95

ControlCenter4

Device Settings tab 4

This section briefly introduces the Device Settings tab function. For more details of each function, click Help.

Configuring Remote Setup 4

The Remote Setup button lets you open the Remote Setup Program window to configure most machine and network setting menus.

a Select the Device Settings tab. b Click Remote Setup. c The Remote Setup Program window will appear. For Remote Setup configuration, see Remote Setup

on page 93.

Accessing Quick Dial 4

The Quick Dial button lets you open the Address Book window in the Remote Setup Program. You can then easily register or change the Quick Dial numbers from your PC.

a Select the Device Settings tab. b Click Quick Dial. c The Address Book window will appear. For Address Book configuration, see Remote Setup (MFC

models only) on page 93.

Page 96

ControlCenter4

Configuring Scan button settings 4

The Device Scan Settings button lets you configure your machine’s SCAN key settings.

a Select the Device Settings tab. b Click Device Scan Settings. c The Device Scan Settings dialog will appear. You can change settings of each Scan button function. d Click OK.

Page 97

ControlCenter4

Note

Launching the BRAdmin utility 4

If you have installed BRAdmin Light or BRAdmin Professional 3, the BRAdmin button lets you open the BRAdmin Light or BRAdmin Professional 3 utility.

The BRAdmin Light utility is designed for initial setup of the Brother network connected devices. It can also search for Brother products in a TCP/IP environment, view the status and configure basic network settings, such as the IP address. To install BRAdmin Light from the installation CD-ROM, see Network User's Guide. If you require more advanced machine management, use the latest version of BRAdmin Professional 3 utility that is available as a download from http://solutions.brother.com/

a Select the Device Settings tab. b Click BRAdmin. The BRAdmin Light or BRAdmin Professional 3 utility dialog appears.

If you have installed both BRAdmin Light and BRAdmin Professional, ControlCenter 4 will launch BRAdmin Professional 3.

Page 98

ControlCenter4

Support tab 4

This section briefly introduces the Support tab function. For more details of each function, click the Help button in ControlCenter4.

Opening ControlCenter Help 4

The ControlCenter Help lets you open the Help file for detailed information about ControlCenter.

a Select the Support tab. b Click ControlCenter Help. c The ControlCenter Help top page will appear.

Using Brother Solutions Center 4

a Select the Support tab. b Click Brother Solutions Center. c The Brother Solutions Center website will be shown in your web browser.

Accessing the Brother CreativeCenter 4

The Brother CreativeCenter button lets you access our website for free and easy online solutions for business and home users.

a Select the Support tab. b Click Brother CreativeCenter. ControlCenter 4 will launch your web browser and then open the Brother

CreativeCenter website.

Page 99

ControlCenter4

Custom tab 4

This section briefly introduces adding a Custom tab. For more details, click Help.

Creating a Custom tab 4

You can create up to three customized tabs including up to five customized buttons with your original settings.

a Click Configuration and then select Create custom tab.

Page 100

ControlCenter4

Note

Creating a Custom button 4

a Click Configuration and then select Create custom button.

Select a button you want to create from the menu. The settings dialog will appear.

b Enter the button name and change the settings if necessary. Click OK. (The setting options vary

depending on the created button.)

You can change or remove the created tab, button or settings. Click Configuration and follow the menu.

Brother DCP-7055, DCP-7060D, DCP-7065DN User's Guide

Specifications and Main Features

Frequently Asked Questions

User Manual

Table of Contents

Machine operation keys

Using the control panel 1

Using printer keys 1

Job Cancel 1

Secure Key (For MFC-7460DN, MFC-7470D, MFC-7860DN and MFC-7860DW) 1

Printer Emulation Support (For MFC-7470D, MFC-7860DN and MFC-7860DW) 1

Setting the Emulation mode 1

Printing the Internal Font List (For MFC-7470D, MFC-7860DN and MFC-7860DW)1

Printing the Print Configuration List (For MFC-7470D, MFC-7860DN and MFC-7860DW) 1

Test Print (For MFC-7470D, MFC-7860DN and MFC-7860DW) 1

Duplex Print (For MFC-7470D, MFC-7860DN and MFC-7860DW) 1

Restoring default printer settings (For MFC-7470D, MFC-7860DN and MFC-7860DW) 1

Using the scan keys 1

Printing 2

Using the Brother printer driver 2

Printing a document 2

Duplex printing 2

Guidelines for printing on both sides of the paper 2

Automatic duplex printing (Not available for DCP-7055, MFC-7360, MFC-7362N and MFC-7360N) 2

Manual duplex printing 2

Simultaneous scanning, printing and faxing 2

Printer driver settings 2

Accessing the printer driver settings 2

Features in the Windows® printer driver 2

Basic tab 2

Paper Size 2

Orientation 2

Copies 2

Media Type 2

Resolution 2

Print Settings 2

Multiple Page 2

Duplex / Booklet 2

Paper Source 2

Advanced tab 2

Scaling 2

Reverse Print 2

Use Watermark 2

Watermark Settings 2

Transparent 2

In Outline Text 2

Custom Settings 2

Header-Footer Print 2

Toner Save Mode 2

Secure Print (For MFC-7460DN, MFC-7470D, MFC-7860DN and MFC-7860DW) 2

Administrator 2

User Authentication (For MFC-7860DN and MFC-7860DW) 2

Other Print Options 2

 Density Adjustment

Macro (For MFC-7470D, MFC-7860DN and MFC-7860DW) 2

Improve Print Output 2

Skip Blank Page 2

Print Profiles tab 2

Editing a print profile 2

Support 2

Tray Settings 2

Status Monitor 2

Printing Preferences 2

Advanced options 2

Ports tab 2

Status Monitor 2

Monitoring the machine’s status 2

Scanning 3

Scanning a document using the TWAIN driver 3

Scanning a document into the PC 3

Pre-Scanning to crop a portion you want to scan 3

Settings in the Scanner Setup dialog box 3

Scan (Image Type) 3

Resolution 3

Scan Type 3

Reduce Noise 3

Brightness 3

Contrast 3

Document Size 3

Scanning a document using the WIA driver (Windows®XP/Windows Vista®/Windows®7) 3