Breville BDF500BSS Instruction Handbook

Breville Customer Service Centre
Australian Customers
Mail: PO Box 22
Phone: 1300 139 798
Fax: (02) 9384 9601
Customer Service:
Email:
askus@breville.com.au
www.breville.com.au
Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.
Due to continued product improvement, the products illustrated/photographed
in this brochure may vary slightly from the actual product.
Copyright Breville Pty. Ltd. 2010.
New Zealand Customers
Mail: Private Bag 94411
Botany Manukau 2163 Auckland NEW ZEALAND
Phone:
0800 273 845
Fax: 0800 288 513
Customer Service:
Email:
askus@breville.com.au
BDF500 Issue - B11
the Smart Fryer
Instruction Booklet
BDF500
CONGRATULATIONS
on the purchase of your new Breville
Smart Fryer
CONTENTS
4 Breville recommends safety first
6 Know your Breville
Smart Fryer
8 Operating your Breville
Smart Fryer
11 Cooking with your Breville
Smart Fryer
17 Cooking techniques & tips
21 Care & cleaning
24 Recipes
3
BREVILLE RECOMMENDS SAFETY FIRST
At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE
Carefully read all instructions before
operating and save for future reference.
Remove any packaging material and
promotional stickers before using the deep fryer for the first time.
Do not place the deep fryer near
the edge of a bench or table during operation. Ensure the surface is level, clean and free of water.
Do not place the deep fryer on or near
a hot gas or electric burner, or where it could touch a heated oven.
Place the deep fryer at least 20cm
away from walls and curtains. Provide adequate space above and on all sides for air circulation around the deep fryer.
Do not use on metal surfaces, for
example, a sink drain board.
Always insure the deep fryer is properly
assembled before use. Follow the instruction provided in this book.
To protect against electric shock, do
not immerse cord in water or any other liquid.
Ensure the deep fryer is completely dry
and free of water before adding any oil.
Extreme caution must be used when
the deep fryer contains hot oil or other liquid. Do not move the appliance during cooking. Allow the deep fryer to cool before removing oil or other liquid.
Solid oil products, such as butter,
margarine or animal fats of any kind should not be used in the deep fryer as they may overheat and cause a fire hazard.
Do not touch hot surfaces.
At no time should the deep fryer be left
unattended when in use.
The deep fryer will generate a lot of heat
and steam during and after the cooking process. To prevent the risk of burns, do not touch or block the steam ventilation area on the lid. Remove lid to reduce condensation build up.
Take care when opening the lid. This
product generate heat and steam at high temperatures, which will escape immediately when the lid is opened. Avoid touching hot surfaces.
Do not place anything on top of the deep
fryer when the lid is closed, when in use and when stored.
Always switch the deep fryer off at the
power outlet, then unplug and allow to cool, if appliance is not in use, before cleaning, before attempting to move the appliance, disassembling, assembling and when storing the appliance.
Keep the appliance clean. Follow the
cleaning instructions provided in this book.
Do not immerse the deep fryer control
panel, element or cord in water or any other liquid.
4
BREVILLE RECOMMENDS SAFETY FIRST
IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
Fully unwind the power cord before use.
Do not let the power cord hang over
the edge of a bench or table, touch hot surfaces or become knotted.
To protect against electric shock do not
immerse the power cord, power plug or appliance in water or any other liquid.
The appliance is not intended for use
by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
It is recommended to regularly inspect
the appliance. To avoid a hazard do not use the appliance if power cord, power plug or appliance becomes damaged in any way. Return the entire appliance to the nearest authorised Breville Service Centre for examination and/or repair.
Any maintenance other than cleaning
should be performed at an authorised Breville Service Centre.
This appliance is for household use only.
Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause injury.
The installation of a residual current
device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.
The appliance is not intended to be
operated by means of an external timer or a separate remote control system.
SAVE THESE INSTRUCTIONS
5
5
KNOW
your Breville Smart Fryer
KNOW YOUR BREVILLE SMART FRYER
FE E
A
B
C
D
G
H
E
I
J K
A. LCD display
Indicates time, temperature plus preprogrammed cooking functions for your favourite dishes.
B. Mesh filter
Filter to minimize cooking odours.
C. Cord storage D. ‘Cool Zone’ technology
Debris falls into cooler oil, preventing excess burning and extending oil life.
E. Cool touch handles F. Large viewing window
G. Large 4 litre capacity
Easy to disassemble and clean. 1-1.2kg recommended cooking capacity.
H. Stainless steel exterior
High quality stainless steel cooking surface. Ideal for the professional cook.
I. Non-skid feet J. Frying basket with fold down handle
Handle folds inside basket for easy storage.
K. Powerful 2200 watt removable element
7
OPERATING
your Breville Smart Fryer™
OPERATING YOUR BREVILLE SMART FRYER
STEP 1
Remove lid from the deep fryer by grasping the handle on top and lift off.
STEP 2
The wire frying basket has a hinged handle for compact storage. Remove the basket from the deep fryer. Extend and lock the basket handle into position by squeezing the two handle prongs together, pull back and lock behind the two wire supports extending from edge of basket.
STEP 3
Lift the control panel with attached element upwards and away from the deep fryer.
STEP 4
Remove the inner frying bowl by grasping the rim and lifting upwards.
STEP 5
To reassemble the deep fryer, reverse steps 1-4.
WARNING
When assembling your deep fryer for use, please ensure the narrow tongues in the control panel are inserted into the corresponding grooves of the deep fryer body. The deep fryer will not operate unless correctly assembled.
BEFORE FIRST USE
Remove any promotional materials and packaging materials before use. Wash the lid, removable inner bowl, stainless steel outer body and wire frying basket in hot soapy water, rinse and dry thoroughly. Wipe the element with a soft, damp cloth and dry thoroughly. Reassemble and ensure the bowl is completely free of water before adding any oil.
1. Place the deep fryer on a dry, level
surface. Ensure the deep fryer is not too close to the edge of the bench top, and that the power cord or basket handle does not extend over the edge.
2. Remove the frying basket from the deep
fryer and add oil to the bowl. Do not add less than the minimum level mark (2.5 litres) or exceed the maximum level mark (4 litres).
IMPORTANT
NEVER exceed the maximum level mark with oil (maximum is 4 litres). This product must be filled with oil to the exact marked level. The product will be severely damaged if heated without oil in the frying bowl.
3. Replace the lid.
4. Plug in the power cord. Ensure cord
is fully extended. Switch on at power outlet and the deep fryer will beep once for self checking, the display panel will illuminate with white background light. The deep fryer enters COOK mode.
9
OPERATING YOUR BREVILLE SMART FRYER
5. To change temperature format, press
and hold the SCROLL/SELECT knob for three seconds. If the temperature format is set to Celsius, it will change to Fahrenheit after pressing the SCROLL/ SELECT knob for three seconds. Change the format one time per command. To change the format again, release the knob, and again press and hold the SCROLL/SELECT knob for three seconds.
NOTE
When the deep fryer is switched off at the power outlet and then switched back on, the cooking temperature format display will default to the last selected format, Celsius or Fahrenheit.
STAND BY MODE
When the deep fryer remains inactive for 10 minutes, it will enter stand by mode. The white backlight will turn off and STANDBY will display. The fryer will come out of stand by mode by pushing any button or turning the SCROLL/SELECT knob and then is ready to start a cooking operation.
10
COOKING
with your Breville Smart Fryer
Loading...
+ 28 hidden pages